Merge series "Add support for voltage regulator on ChromeOS EC." from Pi-Hsun Shih <pihsun@chromium.org>:

Add support for controlling voltage regulator that is connected and
controlled by ChromeOS EC. Kernel controls these regulators through
newly added EC host commands.

Changes from v5:
* Move new host command to a separate patch.
* Use devm_regulator_register.
* Address review comments.

Changes from v4:
* Change compatible name from regulator-cros-ec to cros-ec-regulator.

Changes from v3:
* Fix dt bindings file name.
* Remove check around CONFIG_OF in driver.
* Add new host commands to cros_ec_trace.
* Address review comments.

Changes from v2:
* Add 'depends on OF' to Kconfig.
* Add Kconfig description about compiling as module.

Changes from v1:
* Change compatible string to google,regulator-cros-ec.
* Use reg property in device tree.
* Change license for dt binding according to checkpatch.pl.
* Address comments on code styles.

Pi-Hsun Shih (3):
  dt-bindings: regulator: Add DT binding for cros-ec-regulator
  platform/chrome: cros_ec: Add command for regulator control.
  regulator: Add driver for cros-ec-regulator

 .../regulator/google,cros-ec-regulator.yaml   |  51 ++++
 drivers/platform/chrome/cros_ec_trace.c       |   5 +
 drivers/regulator/Kconfig                     |  10 +
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/cros-ec-regulator.c         | 257 ++++++++++++++++++
 .../linux/platform_data/cros_ec_commands.h    |  82 ++++++
 6 files changed, 406 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
 create mode 100644 drivers/regulator/cros-ec-regulator.c

base-commit: b791d1bdf9212d944d749a5c7ff6febdba241771
--
2.27.0.290.gba653c62da-goog

1 files changed, 82 insertions, 0 deletions

diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
index 69210881ebac..a417b51b5764 100644
--- a/include/linux/platform_data/cros_ec_commands.h
+++ b/include/linux/platform_data/cros_ec_commands.h
@@ -5431,6 +5431,88 @@ struct ec_response_rollback_info {
 #define EC_CMD_AP_RESET 0x0125
 
 /*****************************************************************************/
+/* Voltage regulator controls */
+
+/*
+ * Get basic info of voltage regulator for given index.
+ *
+ * Returns the regulator name and supported voltage list in mV.
+ */
+#define EC_CMD_REGULATOR_GET_INFO 0x012B
+
+/* Maximum length of regulator name */
+#define EC_REGULATOR_NAME_MAX_LEN 16
+
+/* Maximum length of the supported voltage list. */
+#define EC_REGULATOR_VOLTAGE_MAX_COUNT 16
+
+struct ec_params_regulator_get_info {
+	uint32_t index;
+} __ec_align4;
+
+struct ec_response_regulator_get_info {
+	char name[EC_REGULATOR_NAME_MAX_LEN];
+	uint16_t num_voltages;
+	uint16_t voltages_mv[EC_REGULATOR_VOLTAGE_MAX_COUNT];
+} __ec_align1;
+
+/*
+ * Configure the regulator as enabled / disabled.
+ */
+#define EC_CMD_REGULATOR_ENABLE 0x012C
+
+struct ec_params_regulator_enable {
+	uint32_t index;
+	uint8_t enable;
+} __ec_align4;
+
+/*
+ * Query if the regulator is enabled.
+ *
+ * Returns 1 if the regulator is enabled, 0 if not.
+ */
+#define EC_CMD_REGULATOR_IS_ENABLED 0x012D
+
+struct ec_params_regulator_is_enabled {
+	uint32_t index;
+} __ec_align4;
+
+struct ec_response_regulator_is_enabled {
+	uint8_t enabled;
+} __ec_align1;
+
+/*
+ * Set voltage for the voltage regulator within the range specified.
+ *
+ * The driver should select the voltage in range closest to min_mv.
+ *
+ * Also note that this might be called before the regulator is enabled, and the
+ * setting should be in effect after the regulator is enabled.
+ */
+#define EC_CMD_REGULATOR_SET_VOLTAGE 0x012E
+
+struct ec_params_regulator_set_voltage {
+	uint32_t index;
+	uint32_t min_mv;
+	uint32_t max_mv;
+} __ec_align4;
+
+/*
+ * Get the currently configured voltage for the voltage regulator.
+ *
+ * Note that this might be called before the regulator is enabled.
+ */
+#define EC_CMD_REGULATOR_GET_VOLTAGE 0x012F
+
+struct ec_params_regulator_get_voltage {
+	uint32_t index;
+} __ec_align4;
+
+struct ec_response_regulator_get_voltage {
+	uint32_t voltage_mv;
+} __ec_align4;
+
+/*****************************************************************************/
 /* The command range 0x200-0x2FF is reserved for Rotor. */
 
 /*****************************************************************************/