Merge tag 'v6.13-rc3' into next

Sync up with the mainline.

22 files changed, 185 insertions, 527 deletions

diff --git a/include/linux/platform_data/ad5449.h b/include/linux/platform_data/ad5449.h
deleted file mode 100644
index d687ef5726c2..000000000000
--- a/include/linux/platform_data/ad5449.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * AD5415, AD5426, AD5429, AD5432, AD5439, AD5443, AD5449 Digital to Analog
- * Converter driver.
- *
- * Copyright 2012 Analog Devices Inc.
- *  Author: Lars-Peter Clausen <lars@metafoo.de>
- */
-
-#ifndef __LINUX_PLATFORM_DATA_AD5449_H__
-#define __LINUX_PLATFORM_DATA_AD5449_H__
-
-/**
- * enum ad5449_sdo_mode - AD5449 SDO pin configuration
- * @AD5449_SDO_DRIVE_FULL: Drive the SDO pin with full strength.
- * @AD5449_SDO_DRIVE_WEAK: Drive the SDO pin with not full strength.
- * @AD5449_SDO_OPEN_DRAIN: Operate the SDO pin in open-drain mode.
- * @AD5449_SDO_DISABLED: Disable the SDO pin, in this mode it is not possible to
- *			read back from the device.
- */
-enum ad5449_sdo_mode {
-	AD5449_SDO_DRIVE_FULL = 0x0,
-	AD5449_SDO_DRIVE_WEAK = 0x1,
-	AD5449_SDO_OPEN_DRAIN = 0x2,
-	AD5449_SDO_DISABLED = 0x3,
-};
-
-/**
- * struct ad5449_platform_data - Platform data for the ad5449 DAC driver
- * @sdo_mode: SDO pin mode
- * @hardware_clear_to_midscale: Whether asserting the hardware CLR pin sets the
- *			outputs to midscale (true) or to zero scale(false).
- */
-struct ad5449_platform_data {
-	enum ad5449_sdo_mode sdo_mode;
-	bool hardware_clear_to_midscale;
-};
-
-#endif
diff --git a/include/linux/platform_data/amd_qdma.h b/include/linux/platform_data/amd_qdma.h
new file mode 100644
index 000000000000..576d952f97ed
--- /dev/null
+++ b/include/linux/platform_data/amd_qdma.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2023-2024, Advanced Micro Devices, Inc.
+ */
+
+#ifndef _PLATDATA_AMD_QDMA_H
+#define _PLATDATA_AMD_QDMA_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct qdma_queue_info - DMA queue information. This information is used to
+ *			    match queue when DMA channel is requested
+ * @dir: Channel transfer direction
+ */
+struct qdma_queue_info {
+	enum dma_transfer_direction dir;
+};
+
+#define QDMA_FILTER_PARAM(qinfo)	((void *)(qinfo))
+
+struct dma_slave_map;
+
+/**
+ * struct qdma_platdata - Platform specific data for QDMA engine
+ * @max_mm_channels: Maximum number of MM DMA channels in each direction
+ * @device_map: DMA slave map
+ * @irq_index: The index of first IRQ
+ */
+struct qdma_platdata {
+	u32			max_mm_channels;
+	u32			irq_index;
+	struct dma_slave_map	*device_map;
+};
+
+#endif /* _PLATDATA_AMD_QDMA_H */
diff --git a/include/linux/platform_data/asoc-s3c.h b/include/linux/platform_data/asoc-s3c.h
index f9c00f839e9f..085dd8e8af76 100644
--- a/include/linux/platform_data/asoc-s3c.h
+++ b/include/linux/platform_data/asoc-s3c.h
@@ -13,8 +13,6 @@
 
 #include <linux/dmaengine.h>
 
-extern void s3c64xx_ac97_setup_gpio(int);
-
 struct samsung_i2s_type {
 /* If the Primary DAI has 5.1 Channels */
 #define QUIRK_PRI_6CHAN		(1 << 0)
diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
index e574b790be6f..b3c4993e656e 100644
--- a/include/linux/platform_data/cros_ec_commands.h
+++ b/include/linux/platform_data/cros_ec_commands.h
@@ -1312,6 +1312,38 @@ enum ec_feature_code {
 	 * The EC supports the AP composing VDMs for us to send.
 	 */
 	EC_FEATURE_TYPEC_AP_VDM_SEND = 46,
+	/*
+	 * The EC supports system safe mode panic recovery.
+	 */
+	EC_FEATURE_SYSTEM_SAFE_MODE = 47,
+	/*
+	 * The EC will reboot on runtime assertion failures.
+	 */
+	EC_FEATURE_ASSERT_REBOOTS = 48,
+	/*
+	 * The EC image is built with tokenized logging enabled.
+	 */
+	EC_FEATURE_TOKENIZED_LOGGING = 49,
+	/*
+	 * The EC supports triggering an STB dump.
+	 */
+	EC_FEATURE_AMD_STB_DUMP = 50,
+	/*
+	 * The EC supports memory dump commands.
+	 */
+	EC_FEATURE_MEMORY_DUMP = 51,
+	/*
+	 * The EC supports DP2.1 capability
+	 */
+	EC_FEATURE_TYPEC_DP2_1 = 52,
+	/*
+	 * The MCU is System Companion Processor Core 1
+	 */
+	EC_FEATURE_SCP_C1 = 53,
+	/*
+	 * The EC supports UCSI PPM.
+	 */
+	EC_FEATURE_UCSI_PPM = 54,
 };
 
 #define EC_FEATURE_MASK_0(event_code) BIT(event_code % 32)
diff --git a/include/linux/platform_data/dma-ep93xx.h b/include/linux/platform_data/dma-ep93xx.h
deleted file mode 100644
index eb9805bb3fe8..000000000000
--- a/include/linux/platform_data/dma-ep93xx.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <linux/types.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-
-/*
- * M2P channels.
- *
- * Note that these values are also directly used for setting the PPALLOC
- * register.
- */
-#define EP93XX_DMA_I2S1		0
-#define EP93XX_DMA_I2S2		1
-#define EP93XX_DMA_AAC1		2
-#define EP93XX_DMA_AAC2		3
-#define EP93XX_DMA_AAC3		4
-#define EP93XX_DMA_I2S3		5
-#define EP93XX_DMA_UART1	6
-#define EP93XX_DMA_UART2	7
-#define EP93XX_DMA_UART3	8
-#define EP93XX_DMA_IRDA		9
-/* M2M channels */
-#define EP93XX_DMA_SSP		10
-#define EP93XX_DMA_IDE		11
-
-/**
- * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine
- * @port: peripheral which is requesting the channel
- * @direction: TX/RX channel
- * @name: optional name for the channel, this is displayed in /proc/interrupts
- *
- * This information is passed as private channel parameter in a filter
- * function. Note that this is only needed for slave/cyclic channels.  For
- * memcpy channels %NULL data should be passed.
- */
-struct ep93xx_dma_data {
-	int				port;
-	enum dma_transfer_direction	direction;
-	const char			*name;
-};
-
-/**
- * struct ep93xx_dma_chan_data - platform specific data for a DMA channel
- * @name: name of the channel, used for getting the right clock for the channel
- * @base: mapped registers
- * @irq: interrupt number used by this channel
- */
-struct ep93xx_dma_chan_data {
-	const char			*name;
-	void __iomem			*base;
-	int				irq;
-};
-
-/**
- * struct ep93xx_dma_platform_data - platform data for the dmaengine driver
- * @channels: array of channels which are passed to the driver
- * @num_channels: number of channels in the array
- *
- * This structure is passed to the DMA engine driver via platform data. For
- * M2P channels, contract is that even channels are for TX and odd for RX.
- * There is no requirement for the M2M channels.
- */
-struct ep93xx_dma_platform_data {
-	struct ep93xx_dma_chan_data	*channels;
-	size_t				num_channels;
-};
-
-static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan)
-{
-	return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p");
-}
-
-/**
- * ep93xx_dma_chan_direction - returns direction the channel can be used
- * @chan: channel
- *
- * This function can be used in filter functions to find out whether the
- * channel supports given DMA direction. Only M2P channels have such
- * limitation, for M2M channels the direction is configurable.
- */
-static inline enum dma_transfer_direction
-ep93xx_dma_chan_direction(struct dma_chan *chan)
-{
-	if (!ep93xx_dma_chan_is_m2p(chan))
-		return DMA_TRANS_NONE;
-
-	/* even channels are for TX, odd for RX */
-	return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
-}
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/linux/platform_data/eth-ep93xx.h b/include/linux/platform_data/eth-ep93xx.h
deleted file mode 100644
index 8eef637a804d..000000000000
--- a/include/linux/platform_data/eth-ep93xx.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _LINUX_PLATFORM_DATA_ETH_EP93XX
-#define _LINUX_PLATFORM_DATA_ETH_EP93XX
-
-struct ep93xx_eth_data {
-	unsigned char	dev_addr[6];
-	unsigned char	phy_id;
-};
-
-#endif
diff --git a/include/linux/platform_data/gpio-ath79.h b/include/linux/platform_data/gpio-ath79.h
deleted file mode 100644
index 3ea6dd942c27..000000000000
--- a/include/linux/platform_data/gpio-ath79.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Atheros AR7XXX/AR9XXX GPIO controller platform data
- *
- * Copyright (C) 2015 Alban Bedel <albeu@free.fr>
- */
-
-#ifndef __LINUX_PLATFORM_DATA_GPIO_ATH79_H
-#define __LINUX_PLATFORM_DATA_GPIO_ATH79_H
-
-struct ath79_gpio_platform_data {
-	unsigned ngpios;
-	bool oe_inverted;
-};
-
-#endif
diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h
deleted file mode 100644
index b82e44662efe..000000000000
--- a/include/linux/platform_data/gpio-davinci.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * DaVinci GPIO Platform Related Defines
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#ifndef __DAVINCI_GPIO_PLATFORM_H
-#define __DAVINCI_GPIO_PLATFORM_H
-
-struct davinci_gpio_platform_data {
-	bool	no_auto_base;
-	u32	base;
-	u32	ngpio;
-	u32	gpio_unbanked;
-};
-
-/* Convert GPIO signal to GPIO pin number */
-#define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
-
-#endif
diff --git a/include/linux/platform_data/hwmon-s3c.h b/include/linux/platform_data/hwmon-s3c.h
index 1707ad4147df..7d21e0c41037 100644
--- a/include/linux/platform_data/hwmon-s3c.h
+++ b/include/linux/platform_data/hwmon-s3c.h
@@ -33,14 +33,4 @@ struct s3c_hwmon_pdata {
 	struct s3c_hwmon_chcfg	*in[8];
 };
 
-/**
- * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device
- * @pd: Platform data to register to device.
- *
- * Register the given platform data for use with the S3C HWMON device.
- * The call will copy the platform data, so the board definitions can
- * make the structure itself __initdata.
- */
-extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd);
-
 #endif /* __HWMON_S3C_H__ */
diff --git a/include/linux/platform_data/keypad-ep93xx.h b/include/linux/platform_data/keypad-ep93xx.h
deleted file mode 100644
index 3054fced8509..000000000000
--- a/include/linux/platform_data/keypad-ep93xx.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __KEYPAD_EP93XX_H
-#define __KEYPAD_EP93XX_H
-
-struct matrix_keymap_data;
-
-/* flags for the ep93xx_keypad driver */
-#define EP93XX_KEYPAD_DISABLE_3_KEY	(1<<0)	/* disable 3-key reset */
-#define EP93XX_KEYPAD_DIAG_MODE		(1<<1)	/* diagnostic mode */
-#define EP93XX_KEYPAD_BACK_DRIVE	(1<<2)	/* back driving mode */
-#define EP93XX_KEYPAD_TEST_MODE		(1<<3)	/* scan only column 0 */
-#define EP93XX_KEYPAD_AUTOREPEAT	(1<<4)	/* enable key autorepeat */
-
-/**
- * struct ep93xx_keypad_platform_data - platform specific device structure
- * @keymap_data:	pointer to &matrix_keymap_data
- * @debounce:		debounce start count; terminal count is 0xff
- * @prescale:		row/column counter pre-scaler load value
- * @flags:		see above
- */
-struct ep93xx_keypad_platform_data {
-	struct matrix_keymap_data *keymap_data;
-	unsigned int	debounce;
-	unsigned int	prescale;
-	unsigned int	flags;
-	unsigned int	clk_rate;
-};
-
-#define EP93XX_MATRIX_ROWS		(8)
-#define EP93XX_MATRIX_COLS		(8)
-
-#endif	/* __KEYPAD_EP93XX_H */
diff --git a/include/linux/platform_data/max6639.h b/include/linux/platform_data/max6639.h
deleted file mode 100644
index 65bfdb4fdc15..000000000000
--- a/include/linux/platform_data/max6639.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _LINUX_MAX6639_H
-#define _LINUX_MAX6639_H
-
-#include <linux/types.h>
-
-/* platform data for the MAX6639 temperature sensor and fan control */
-
-struct max6639_platform_data {
-	bool pwm_polarity;	/* Polarity low (0) or high (1, default) */
-	int ppr;		/* Pulses per rotation 1..4 (default == 2) */
-	int rpm_range;		/* 2000, 4000 (default), 8000 or 16000 */
-};
-
-#endif /* _LINUX_MAX6639_H */
diff --git a/include/linux/platform_data/max6697.h b/include/linux/platform_data/max6697.h
deleted file mode 100644
index 6fbb70005541..000000000000
--- a/include/linux/platform_data/max6697.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * max6697.h
- *     Copyright (c) 2012 Guenter Roeck <linux@roeck-us.net>
- */
-
-#ifndef MAX6697_H
-#define MAX6697_H
-
-#include <linux/types.h>
-
-/*
- * For all bit masks:
- * bit 0:    local temperature
- * bit 1..7: remote temperatures
- */
-struct max6697_platform_data {
-	bool smbus_timeout_disable;	/* set to disable SMBus timeouts */
-	bool extended_range_enable;	/* set to enable extended temp range */
-	bool beta_compensation;		/* set to enable beta compensation */
-	u8 alert_mask;			/* set bit to 1 to disable alert */
-	u8 over_temperature_mask;	/* set bit to 1 to disable */
-	u8 resistance_cancellation;	/* set bit to 0 to disable
-					 * bit mask for MAX6581,
-					 * boolean for other chips
-					 */
-	u8 ideality_mask;		/* set bit to 0 to disable */
-	u8 ideality_value;		/* transistor ideality as per
-					 * MAX6581 datasheet
-					 */
-};
-
-#endif /* MAX6697_H */
diff --git a/include/linux/platform_data/media/omap4iss.h b/include/linux/platform_data/media/omap4iss.h
deleted file mode 100644
index 2a511a8fcda7..000000000000
--- a/include/linux/platform_data/media/omap4iss.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef ARCH_ARM_PLAT_OMAP4_ISS_H
-#define ARCH_ARM_PLAT_OMAP4_ISS_H
-
-#include <linux/i2c.h>
-
-struct iss_device;
-
-enum iss_interface_type {
-	ISS_INTERFACE_CSI2A_PHY1,
-	ISS_INTERFACE_CSI2B_PHY2,
-};
-
-/**
- * struct iss_csiphy_lane: CSI2 lane position and polarity
- * @pos: position of the lane
- * @pol: polarity of the lane
- */
-struct iss_csiphy_lane {
-	u8 pos;
-	u8 pol;
-};
-
-#define ISS_CSIPHY1_NUM_DATA_LANES	4
-#define ISS_CSIPHY2_NUM_DATA_LANES	1
-
-/**
- * struct iss_csiphy_lanes_cfg - CSI2 lane configuration
- * @data: Configuration of one or two data lanes
- * @clk: Clock lane configuration
- */
-struct iss_csiphy_lanes_cfg {
-	struct iss_csiphy_lane data[ISS_CSIPHY1_NUM_DATA_LANES];
-	struct iss_csiphy_lane clk;
-};
-
-/**
- * struct iss_csi2_platform_data - CSI2 interface platform data
- * @crc: Enable the cyclic redundancy check
- * @vpclk_div: Video port output clock control
- */
-struct iss_csi2_platform_data {
-	unsigned crc:1;
-	unsigned vpclk_div:2;
-	struct iss_csiphy_lanes_cfg lanecfg;
-};
-
-struct iss_subdev_i2c_board_info {
-	struct i2c_board_info *board_info;
-	int i2c_adapter_id;
-};
-
-struct iss_v4l2_subdevs_group {
-	struct iss_subdev_i2c_board_info *subdevs;
-	enum iss_interface_type interface;
-	union {
-		struct iss_csi2_platform_data csi2;
-	} bus; /* gcc < 4.6.0 chokes on anonymous union initializers */
-};
-
-struct iss_platform_data {
-	struct iss_v4l2_subdevs_group *subdevs;
-	void (*set_constraints)(struct iss_device *iss, bool enable);
-};
-
-#endif
diff --git a/include/linux/platform_data/microchip-ksz.h b/include/linux/platform_data/microchip-ksz.h
index 8c659db4da6b..0e0e8fe6975f 100644
--- a/include/linux/platform_data/microchip-ksz.h
+++ b/include/linux/platform_data/microchip-ksz.h
@@ -27,7 +27,9 @@ enum ksz_chip_id {
 	KSZ8795_CHIP_ID = 0x8795,
 	KSZ8794_CHIP_ID = 0x8794,
 	KSZ8765_CHIP_ID = 0x8765,
-	KSZ8830_CHIP_ID = 0x8830,
+	KSZ88X3_CHIP_ID = 0x8830,
+	KSZ8864_CHIP_ID = 0x8864,
+	KSZ8895_CHIP_ID = 0x8895,
 	KSZ9477_CHIP_ID = 0x00947700,
 	KSZ9896_CHIP_ID = 0x00989600,
 	KSZ9897_CHIP_ID = 0x00989700,
@@ -40,6 +42,7 @@ enum ksz_chip_id {
 	LAN9372_CHIP_ID = 0x00937200,
 	LAN9373_CHIP_ID = 0x00937300,
 	LAN9374_CHIP_ID = 0x00937400,
+	LAN9646_CHIP_ID = 0x00964600,
 };
 
 struct ksz_platform_data {
diff --git a/include/linux/platform_data/mtd-davinci-aemif.h b/include/linux/platform_data/mtd-davinci-aemif.h
deleted file mode 100644
index a49826214a39..000000000000
--- a/include/linux/platform_data/mtd-davinci-aemif.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * TI DaVinci AEMIF support
- *
- * Copyright 2010 (C) Texas Instruments, Inc. https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-#ifndef _MACH_DAVINCI_AEMIF_H
-#define _MACH_DAVINCI_AEMIF_H
-
-#include <linux/platform_device.h>
-
-#define NRCSR_OFFSET		0x00
-#define AWCCR_OFFSET		0x04
-#define A1CR_OFFSET		0x10
-
-#define ACR_ASIZE_MASK		0x3
-#define ACR_EW_MASK		BIT(30)
-#define ACR_SS_MASK		BIT(31)
-
-/* All timings in nanoseconds */
-struct davinci_aemif_timing {
-	u8	wsetup;
-	u8	wstrobe;
-	u8	whold;
-
-	u8	rsetup;
-	u8	rstrobe;
-	u8	rhold;
-
-	u8	ta;
-};
-
-#endif
diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h
deleted file mode 100644
index dd474dd44848..000000000000
--- a/include/linux/platform_data/mtd-davinci.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * mach-davinci/nand.h
- *
- * Copyright © 2006 Texas Instruments.
- *
- * Ported to 2.6.23 Copyright © 2008 by
- *   Sander Huijsen <Shuijsen@optelecom-nkf.com>
- *   Troy Kisky <troy.kisky@boundarydevices.com>
- *   Dirk Behme <Dirk.Behme@gmail.com>
- *
- * --------------------------------------------------------------------------
- */
-
-#ifndef __ARCH_ARM_DAVINCI_NAND_H
-#define __ARCH_ARM_DAVINCI_NAND_H
-
-#include <linux/mtd/rawnand.h>
-
-#define NANDFCR_OFFSET		0x60
-#define NANDFSR_OFFSET		0x64
-#define NANDF1ECC_OFFSET	0x70
-
-/* 4-bit ECC syndrome registers */
-#define NAND_4BIT_ECC_LOAD_OFFSET	0xbc
-#define NAND_4BIT_ECC1_OFFSET		0xc0
-#define NAND_4BIT_ECC2_OFFSET		0xc4
-#define NAND_4BIT_ECC3_OFFSET		0xc8
-#define NAND_4BIT_ECC4_OFFSET		0xcc
-#define NAND_ERR_ADD1_OFFSET		0xd0
-#define NAND_ERR_ADD2_OFFSET		0xd4
-#define NAND_ERR_ERRVAL1_OFFSET		0xd8
-#define NAND_ERR_ERRVAL2_OFFSET		0xdc
-
-/* NOTE:  boards don't need to use these address bits
- * for ALE/CLE unless they support booting from NAND.
- * They're used unless platform data overrides them.
- */
-#define	MASK_ALE		0x08
-#define	MASK_CLE		0x10
-
-struct davinci_nand_pdata {		/* platform_data */
-	uint32_t		mask_ale;
-	uint32_t		mask_cle;
-
-	/*
-	 * 0-indexed chip-select number of the asynchronous
-	 * interface to which the NAND device has been connected.
-	 *
-	 * So, if you have NAND connected to CS3 of DA850, you
-	 * will pass '1' here. Since the asynchronous interface
-	 * on DA850 starts from CS2.
-	 */
-	uint32_t		core_chipsel;
-
-	/* for packages using two chipselects */
-	uint32_t		mask_chipsel;
-
-	/* board's default static partition info */
-	struct mtd_partition	*parts;
-	unsigned		nr_parts;
-
-	/* none  == NAND_ECC_ENGINE_TYPE_NONE (strongly *not* advised!!)
-	 * soft  == NAND_ECC_ENGINE_TYPE_SOFT
-	 * else  == NAND_ECC_ENGINE_TYPE_ON_HOST, according to ecc_bits
-	 *
-	 * All DaVinci-family chips support 1-bit hardware ECC.
-	 * Newer ones also support 4-bit ECC, but are awkward
-	 * using it with large page chips.
-	 */
-	enum nand_ecc_engine_type engine_type;
-	enum nand_ecc_placement ecc_placement;
-	u8			ecc_bits;
-
-	/* e.g. NAND_BUSWIDTH_16 */
-	unsigned		options;
-	/* e.g. NAND_BBT_USE_FLASH */
-	unsigned		bbt_options;
-
-	/* Main and mirror bbt descriptor overrides */
-	struct nand_bbt_descr	*bbt_td;
-	struct nand_bbt_descr	*bbt_md;
-
-	/* Access timings */
-	struct davinci_aemif_timing	*timing;
-};
-
-#endif	/* __ARCH_ARM_DAVINCI_NAND_H */
diff --git a/include/linux/platform_data/sa11x0-serial.h b/include/linux/platform_data/sa11x0-serial.h
index 8b79ab08af45..a88096bc74e4 100644
--- a/include/linux/platform_data/sa11x0-serial.h
+++ b/include/linux/platform_data/sa11x0-serial.h
@@ -10,7 +10,6 @@
 #define SA11X0_SERIAL_H
 
 struct uart_port;
-struct uart_info;
 
 /*
  * This is a temporary structure for registering these
diff --git a/include/linux/platform_data/spi-ep93xx.h b/include/linux/platform_data/spi-ep93xx.h
deleted file mode 100644
index b439f2a896e0..000000000000
--- a/include/linux/platform_data/spi-ep93xx.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_EP93XX_SPI_H
-#define __ASM_MACH_EP93XX_SPI_H
-
-struct spi_device;
-
-/**
- * struct ep93xx_spi_info - EP93xx specific SPI descriptor
- * @use_dma: use DMA for the transfers
- */
-struct ep93xx_spi_info {
-	bool	use_dma;
-};
-
-#endif /* __ASM_MACH_EP93XX_SPI_H */
diff --git a/include/linux/platform_data/ti-aemif.h b/include/linux/platform_data/ti-aemif.h
deleted file mode 100644
index 77625251df07..000000000000
--- a/include/linux/platform_data/ti-aemif.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * TI DaVinci AEMIF platform glue.
- *
- * Copyright (C) 2017 BayLibre SAS
- *
- * Author:
- *   Bartosz Golaszewski <bgolaszewski@baylibre.com>
- */
-
-#ifndef __TI_DAVINCI_AEMIF_DATA_H__
-#define __TI_DAVINCI_AEMIF_DATA_H__
-
-#include <linux/of_platform.h>
-
-/**
- * struct aemif_abus_data - Async bus configuration parameters.
- *
- * @cs - Chip-select number.
- */
-struct aemif_abus_data {
-	u32 cs;
-};
-
-/**
- * struct aemif_platform_data - Data to set up the TI aemif driver.
- *
- * @dev_lookup: of_dev_auxdata passed to of_platform_populate() for aemif
- *              subdevices.
- * @cs_offset: Lowest allowed chip-select number.
- * @abus_data: Array of async bus configuration entries.
- * @num_abus_data: Number of abus entries.
- * @sub_devices: Array of platform subdevices.
- * @num_sub_devices: Number of subdevices.
- */
-struct aemif_platform_data {
-	struct of_dev_auxdata *dev_lookup;
-	u32 cs_offset;
-	struct aemif_abus_data *abus_data;
-	size_t num_abus_data;
-	struct platform_device *sub_devices;
-	size_t num_sub_devices;
-};
-
-#endif /* __TI_DAVINCI_AEMIF_DATA_H__ */
diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
index 0aeeae1c1943..365e119bebaa 100644
--- a/include/linux/platform_data/x86/asus-wmi.h
+++ b/include/linux/platform_data/x86/asus-wmi.h
@@ -4,6 +4,7 @@
 
 #include <linux/errno.h>
 #include <linux/types.h>
+#include <linux/dmi.h>
 
 /* WMI Methods */
 #define ASUS_WMI_METHODID_SPEC	        0x43455053 /* BIOS SPECification */
@@ -62,12 +63,14 @@
 #define ASUS_WMI_DEVID_KBD_BACKLIGHT	0x00050021
 #define ASUS_WMI_DEVID_LIGHT_SENSOR	0x00050022 /* ?? */
 #define ASUS_WMI_DEVID_LIGHTBAR		0x00050025
+#define ASUS_WMI_DEVID_OOBE		0x0005002F
 /* This can only be used to disable the screen, not re-enable */
 #define ASUS_WMI_DEVID_SCREENPAD_POWER	0x00050031
 /* Writing a brightness re-enables the screen if disabled */
 #define ASUS_WMI_DEVID_SCREENPAD_LIGHT	0x00050032
 #define ASUS_WMI_DEVID_FAN_BOOST_MODE	0x00110018
 #define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY 0x00120075
+#define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO 0x00110019
 
 /* Misc */
 #define ASUS_WMI_DEVID_PANEL_OD		0x00050019
@@ -164,4 +167,39 @@ static inline int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1,
 }
 #endif
 
+/* To be used by both hid-asus and asus-wmi to determine which controls kbd_brightness */
+static const struct dmi_system_id asus_use_hid_led_dmi_ids[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Zephyrus"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Strix"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Flow"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "GA403U"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "GU605M"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "RC71L"),
+		},
+	},
+	{ },
+};
+
 #endif	/* __PLATFORM_DATA_X86_ASUS_WMI_H */
diff --git a/include/linux/platform_data/intel-mid_wdt.h b/include/linux/platform_data/x86/intel-mid_wdt.h
index 8dba70b4b020..e5c0210d0fec 100644
--- a/include/linux/platform_data/intel-mid_wdt.h
+++ b/include/linux/platform_data/x86/intel-mid_wdt.h
@@ -6,8 +6,8 @@
  *      Contact: David Cohen <david.a.cohen@linux.intel.com>
  */
 
-#ifndef __INTEL_MID_WDT_H__
-#define __INTEL_MID_WDT_H__
+#ifndef __PLATFORM_X86_INTEL_MID_WDT_H_
+#define __PLATFORM_X86_INTEL_MID_WDT_H_
 
 #include <linux/platform_device.h>
 
@@ -16,4 +16,4 @@ struct intel_mid_wdt_pdata {
 	int (*probe)(struct platform_device *pdev);
 };
 
-#endif /*__INTEL_MID_WDT_H__*/
+#endif	/* __PLATFORM_X86_INTEL_MID_WDT_H_ */
diff --git a/include/linux/platform_data/x86/intel_scu_ipc.h b/include/linux/platform_data/x86/intel_scu_ipc.h
new file mode 100644
index 000000000000..b287627759f7
--- /dev/null
+++ b/include/linux/platform_data/x86/intel_scu_ipc.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PLATFORM_X86_INTEL_SCU_IPC_H_
+#define __PLATFORM_X86_INTEL_SCU_IPC_H_
+
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/types.h>
+
+struct device;
+struct module;
+
+struct intel_scu_ipc_dev;
+
+/**
+ * struct intel_scu_ipc_data - Data used to configure SCU IPC
+ * @mem: Base address of SCU IPC MMIO registers
+ * @irq: The IRQ number used for SCU (optional)
+ */
+struct intel_scu_ipc_data {
+	struct resource mem;
+	int irq;
+};
+
+struct intel_scu_ipc_dev *
+__intel_scu_ipc_register(struct device *parent,
+			 const struct intel_scu_ipc_data *scu_data,
+			 struct module *owner);
+
+#define intel_scu_ipc_register(parent, scu_data)  \
+	__intel_scu_ipc_register(parent, scu_data, THIS_MODULE)
+
+void intel_scu_ipc_unregister(struct intel_scu_ipc_dev *scu);
+
+struct intel_scu_ipc_dev *
+__devm_intel_scu_ipc_register(struct device *parent,
+			      const struct intel_scu_ipc_data *scu_data,
+			      struct module *owner);
+
+#define devm_intel_scu_ipc_register(parent, scu_data)  \
+	__devm_intel_scu_ipc_register(parent, scu_data, THIS_MODULE)
+
+struct intel_scu_ipc_dev *intel_scu_ipc_dev_get(void);
+void intel_scu_ipc_dev_put(struct intel_scu_ipc_dev *scu);
+struct intel_scu_ipc_dev *devm_intel_scu_ipc_dev_get(struct device *dev);
+
+int intel_scu_ipc_dev_ioread8(struct intel_scu_ipc_dev *scu, u16 addr,
+			      u8 *data);
+int intel_scu_ipc_dev_iowrite8(struct intel_scu_ipc_dev *scu, u16 addr,
+			       u8 data);
+int intel_scu_ipc_dev_readv(struct intel_scu_ipc_dev *scu, u16 *addr,
+			    u8 *data, size_t len);
+int intel_scu_ipc_dev_writev(struct intel_scu_ipc_dev *scu, u16 *addr,
+			     u8 *data, size_t len);
+
+int intel_scu_ipc_dev_update(struct intel_scu_ipc_dev *scu, u16 addr,
+			     u8 data, u8 mask);
+
+int intel_scu_ipc_dev_simple_command(struct intel_scu_ipc_dev *scu, int cmd,
+				     int sub);
+int intel_scu_ipc_dev_command_with_size(struct intel_scu_ipc_dev *scu, int cmd,
+					int sub, const void *in, size_t inlen,
+					size_t size, void *out, size_t outlen);
+
+static inline int intel_scu_ipc_dev_command(struct intel_scu_ipc_dev *scu, int cmd,
+					    int sub, const void *in, size_t inlen,
+					    void *out, size_t outlen)
+{
+	return intel_scu_ipc_dev_command_with_size(scu, cmd, sub, in, inlen,
+						   inlen, out, outlen);
+}
+
+#endif