Merge tag 'iio-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new IIO device support, fatures and cleanups for the 5.7 cycle

Includes changes for the counter subsystem

Core Feature
* Explicitly handle sysfs values in dB, including correctly handling the
  needed postfix dB.
* Add a TODO to suggest suitable activities for new contributors to IIO now
  the vast majority of drivers are out of staging (and the remaining ones
  there are 'hard'). Also update the TODO in staging to remove stale entries.

Staging graduations
* ad7192 ADC.

New device support
* ad5770r
  - New driver for this 6 channel DAC including DT bindings.
* ad8366
  - Add supprot for the hmc1119 attenuator.
* al3010
  - New driver supporting this Dyna-image light sensors.
  - Power management and DT bindings added in additional patches.
* atlas-sensor
  - Add support for atlas DO-SM device.  Reads disolved oxygen in a solution.
* gpap002x00f
  - New driver and bindings to support the GP2AP002A00F and GP2AP002S00F light
    and proximity sensors. There is some limited existing support in
    input.  The intent is to drop this driver once IIO driver is in place.
* hmc425a
  - New driver for this attenuator.
* icp10100
  - New driver for this presure sensor.
* ltc2632
  - Add support for the ltc2636 8 channel DAC. Includes bindings and some
    tidying up of the driver.
* inv_mpu6050
  - Support IAM20680, ICM20609, ICM20689 and ICM20690.
    Includes related tidy up and rework of low pass filter bandwidth
    handling to give suitable values for all chips.

Binding conversions to yaml or missing bindings docs.
* atlas-sensor, including consolidation of previous 3 separate docs into 1.
* ad7923, previously no doc.
* max1363, split into max1238 and max1363 to simplify yaml.
* stm32-adc

Features
* (counter) 104-quad-8
  - Support a filter clock prescaler.
  - Support reporting of encoder cable status.
* ad7124
  - Low pass filter support.
  - Debugfs interface to access registers directly.
* ad8366
  - Support control of hardware gain.
* inv_mpu6050
  - Runtime pm with autosuspend.
* npcm adc
  - Add reset support. This is a breaking change if DT is not in sync,
    however this device is a BMC so the ecosystem is closed enought that
    this should not be a problem.
* srf04
  - Add power management with DT bindings for the GPIO.
* stm32-timer-trigger
  - Power management.
* (counter) stm32-timer-cnt
  - Power management.
* vcnl4000
  - Enable runtime PM for devices that don't use on demand measurement.

Cleanups and minor fixes
* core
  - Avoid double read when using debugfs.  Whilst we provide no guarantees
    on lack of side effects using the debugfs interfaces, this one is
    generate unexpected results so let us tidy it up.
* dac/Kconfig
  - Alphabetic order.
* ad5755
  - Grammar and minor other fixes.
* ad7124
  - Fail probe if get_voltage fails as no meaningful readings can be had
    without knowing the external reference.
  - Switch to selection between different channel attributes rather than
    building the arrays at runtime.
  - Remove the spi_device_id table as the driver cannot be probled without
    more information that can be provided without dt.
  - Update sysfs docs to provide more inormation and bring remaining docs for
    this part out of staging.
* ad9292
  - Use new SPI transfer delay structure.
* adis library
  - Add unlocked version of adis_initial_startup and refactor the function.
  - Add a product ID santiy check.
  - Add support for different self test registers.
  - Use new SPI delay structure.
  - Add new docs and tidy up existing.
* adis16136
  - Initialize adis_data statically.
* adis16400
  - Initialize adis_data statically.
* adis16460
  - Use core __adis_initial_Startup now it supports everything needed.
* adis16480
  - Initialize adis_data statically.
  - Use core __adis_initial_startup now it supports everything needed.
* al3320a
  - Add missing DT binding docs.
  - Tidy up code formatting.
  - Simplify error paths using devm_add_action_or_reset.
  - Ensure autoloading works by adding the of_match_table.
* atlas-sensor
  - Drop false requirement for interrupt line, the value can be polled using
    a sysfs or hrtimer type trigger.
* exynos-adc
  - Silence warning message on deferring probe.
* gp2ap002
  - Greatly simplify the Lux LUT.
  - Reorder actions around buffer setup and tear down as part of a sub-system
    wide standardization of these.
* inv_mpu6050
  - Various lttle tidyups.
  - Simpliy I2C aux MUX handling by enabling it only at startup. It never
    needs to be disabled.
  - Simplify polling rate when magnetometer enabled by putting only under
    control of userspace.
  - Always execute full reset on devices supporting spi. It does no harm
    when using i2c and makes for simpler code.
  - Reduce over the top sleep times for vddio regulator power up.
  - Greatly simplify power and engine management.
  - Fix some delays in polled reads (only visible due to other changes)
  - Stop preventing sampling rate changes whilst running as there is no
    adverse consequence of doing so.
  - Prevent attempting to read the temperature if neither accel nor
    gyro is enabled.
* lmp9100
  - Reorder actions around buffer setup and tear down as part of a sub-system
    wide standardization of these.
* max1118
  - Use new SPI transfer delay structure.
* mcp320x
  - Use new SPI transfer delay structure.
* si1133
  - Read full 24 bit signed integer instead o dropping last 8 bits of value.
    Not a critical fix as just adds precision.
* st_sensors
  - Use st_sensors_dev_name_probe instead of open coded version in st_accel
  - Handle potential memory allocation failure.
* st_lsm6dsx
  - Fix some wrong structure element naming in documentation.
  - Add missing return value check.
* stm32_timer_cnt
  - Drop some unused left over IIO headers from this count subsystem driver.
  - Ensure the clock is enabled in master mode.  Theoretical issue rather
    than one known to happen in the wild.
* tlc4541
  - Use new SPI delay structure.

* tag 'iio-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (98 commits)
  iio: dac: Kconfig: sort symbols alphabetically
  iio: light: gp2ap020a00f: fix iio_triggered_buffer_{predisable,postenable} positions
  iio: potentiostat: lmp9100: fix iio_triggered_buffer_{predisable,postenable} positions
  iio: trigger: stm32-timer: add power management support
  iio: trigger: stm32-timer: rename enabled flag
  iio: add a TODO
  counter: 104-quad-8: Support Differential Encoder Cable Status
  counter: 104-quad-8: Support Filter Clock Prescaler
  iio: pressure: icp10100: add driver for InvenSense ICP-101xx
  iio: industrialio-core: Fix debugfs read
  iio: imu: adis: add a note better explaining state_lock
  iio: imu: adis: update 'adis_data' struct doc-string
  iio: imu: adis: add doc-string for 'adis' struct
  iio: imu: adis_buffer: Use new structure for SPI transfer delays
  iio: adc: ti-tlc4541: Use new structure for SPI transfer delays
  iio: adc: mcp320x: Use new structure for SPI transfer delays
  iio: adc: max1118: Use new structure for SPI transfer delays
  iio: adc: ad9292: Use new structure for SPI transfer delays
  iio: adc: exynos: Silence warning about regulators during deferred probe
  staging: iio: update TODO
  ...

2 files changed, 51 insertions, 2 deletions

diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index 862ce0019eba..eed58ed2f368 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -568,6 +568,8 @@ struct iio_dev {
 #if defined(CONFIG_DEBUG_FS)
 	struct dentry			*debugfs_dentry;
 	unsigned			cached_reg_addr;
+	char				read_buf[20];
+	unsigned int			read_buf_len;
 #endif
 };
 
diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h
index d2fcf45b4cef..dd8219138c2e 100644
--- a/include/linux/iio/imu/adis.h
+++ b/include/linux/iio/imu/adis.h
@@ -41,9 +41,16 @@ struct adis_timeout {
  * @glob_cmd_reg: Register address of the GLOB_CMD register
  * @msc_ctrl_reg: Register address of the MSC_CTRL register
  * @diag_stat_reg: Register address of the DIAG_STAT register
+ * @prod_id_reg: Register address of the PROD_ID register
+ * @prod_id: Product ID code that should be expected when reading @prod_id_reg
+ * @self_test_mask: Bitmask of supported self-test operations
+ * @self_test_reg: Register address to request self test command
+ * @self_test_no_autoclear: True if device's self-test needs clear of ctrl reg
  * @status_error_msgs: Array of error messgaes
- * @status_error_mask:
+ * @status_error_mask: Bitmask of errors supported by the device
  * @timeouts: Chip specific delays
+ * @enable_irq: Hook for ADIS devices that have a special IRQ enable/disable
+ * @has_paging: True if ADIS device has paged registers
  */
 struct adis_data {
 	unsigned int read_delay;
@@ -53,8 +60,12 @@ struct adis_data {
 	unsigned int glob_cmd_reg;
 	unsigned int msc_ctrl_reg;
 	unsigned int diag_stat_reg;
+	unsigned int prod_id_reg;
+
+	unsigned int prod_id;
 
 	unsigned int self_test_mask;
+	unsigned int self_test_reg;
 	bool self_test_no_autoclear;
 	const struct adis_timeout *timeouts;
 
@@ -66,6 +77,20 @@ struct adis_data {
 	bool has_paging;
 };
 
+/**
+ * struct adis - ADIS device instance data
+ * @spi: Reference to SPI device which owns this ADIS IIO device
+ * @trig: IIO trigger object data
+ * @data: ADIS chip variant specific data
+ * @burst: ADIS burst transfer information
+ * @state_lock: Lock used by the device to protect state
+ * @msg: SPI message object
+ * @xfer: SPI transfer objects to be used for a @msg
+ * @current_page: Some ADIS devices have registers, this selects current page
+ * @buffer: Data buffer for information read from the device
+ * @tx: DMA safe TX buffer for SPI transfers
+ * @rx: DMA safe RX buffer for SPI transfers
+ */
 struct adis {
 	struct spi_device	*spi;
 	struct iio_trigger	*trig;
@@ -73,6 +98,17 @@ struct adis {
 	const struct adis_data	*data;
 	struct adis_burst	*burst;
 
+	/**
+	 * The state_lock is meant to be used during operations that require
+	 * a sequence of SPI R/W in order to protect the SPI transfer
+	 * information (fields 'xfer', 'msg' & 'current_page') between
+	 * potential concurrent accesses.
+	 * This lock is used by all "adis_{functions}" that have to read/write
+	 * registers. These functions also have unlocked variants
+	 * (see "__adis_{functions}"), which don't hold this lock.
+	 * This allows users of the ADIS library to group SPI R/W into
+	 * the drivers, but they also must manage this lock themselves.
+	 */
 	struct mutex		state_lock;
 	struct spi_message	msg;
 	struct spi_transfer	*xfer;
@@ -297,6 +333,7 @@ static inline int adis_read_reg_32(struct adis *adis, unsigned int reg,
 
 int adis_enable_irq(struct adis *adis, bool enable);
 int __adis_check_status(struct adis *adis);
+int __adis_initial_startup(struct adis *adis);
 
 static inline int adis_check_status(struct adis *adis)
 {
@@ -309,7 +346,17 @@ static inline int adis_check_status(struct adis *adis)
 	return ret;
 }
 
-int adis_initial_startup(struct adis *adis);
+/* locked version of __adis_initial_startup() */
+static inline int adis_initial_startup(struct adis *adis)
+{
+	int ret;
+
+	mutex_lock(&adis->state_lock);
+	ret = __adis_initial_startup(adis);
+	mutex_unlock(&adis->state_lock);
+
+	return ret;
+}
 
 int adis_single_conversion(struct iio_dev *indio_dev,
 	const struct iio_chan_spec *chan, unsigned int error_mask,