Merge tag 'mfd-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Support & Features:
   - Add comprehensive support for the ROHM BD72720 PMIC, including core
     MFD, regulator, GPIO, clock gate, RTC, and power-supply drivers
   - Add support for the Rockchip RK801 PMIC, including core MFD and
     regulator drivers
   - Add support for the ROHM BD73900 PMIC by leveraging existing common
     drivers
   - Wire up RTC, hwmon, and input sub-devices for the Apple SMC
     (macsmc) driver
   - Add support for the Delta Networks TN48M switch CPLD via the
     simple-mfd-i2c driver
   - Add support for the TS133 variant to the QNAP MCU driver
   - Provide support for the sama7d65 XLCD controller in the Atmel HLCDC
     driver
   - Add backlight sub-device support to the Congatec Board Controller
     (cgbc)
   - Add Intel Nova Lake-S (NVL-S) PCI IDs to the Intel LPSS driver

  Improvements & Fixes:
   - Implement a "wrapper regmap" for the ROHM BD72720 to handle dual
     I2C slave addresses (0x4b and 0x4c) transparently for child devices
   - Introduce mutex locking around 'mfd_of_node_list' in the MFD core
     to ensure safe concurrent access
   - Fix a potential regulator resource leak in the Arizona core driver
     during boot sequence failures
   - Resolve child device duplication issues on driver rebind for
     Qualcomm PM8xxx and OMAP USB host drivers by using
     of_platform_depopulate()
   - Fix IRQ domain name duplication for the Samsung S2MPG10 by adding a
     unique domain suffix
   - Implement LOCK register handling for the TI TPS65214 variant to
     unlock registers at probe time
   - Fully convert the Loongson-2K BMC driver to use managed resources
     (pcim) and the standard PCI resource API
   - Ensure the Apple SMC mutex is correctly initialized during probe to
     prevent NULL pointer dereferences
   - Expand the ROHM BD71828 power-supply driver to support 9-bit
     register addresses
   - Simplify the Samsung S5M RTC driver by querying platform device IRQ
     resources directly
   - Revert an incorrect read-to-write mask change in the DA9052 SPI
     driver to restore default OTP behavior
   - Fix kernel-doc warnings in the TI TPS6105x driver

- Cleanups & Refactoring
   - Simplify the MFD core by utilizing the scoped
     for_each_child_of_node_scoped() macro and streamlining device_node
     storage
   - Rename ROHM BD71828 IC-specific entities to use consistent prefixes
     for better extensibility
   - Refactor ROHM BD71828 regmap definitions using the
     regmap_reg_range() macro
   - Update the ROHM BD71828 driver to use standard C-style comment
     headers
   - Remove the now unused 'irq_data' field from the Samsung SEC core
     structure
   - Drop unnecessary use of irqd_get_trigger_type() in the Maxim
     MAX77759 driver
   - Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT is selected
   - Add missing charger-related registers to the ROHM BD71828 core
     header and Type-C CC registers to the AXP717

  Device Tree Binding Updates:
   - Add new bindings for the ROHM BD72720 PMIC, Rockchip RK801 PMIC,
     Bitmain BM1880 System Controller, and NXP LPC32xx System Control
     Block
   - Clarify trickle-charge terminology and add properties for voltage
     drop (VDR) correction and upper charge limits to the generic
     battery binding
   - Document GPR syscon for NXP S32 SoCs and the smp-memram subnode for
     Aspeed SCU
   - Document numerous new Qualcomm SPMI PMIC compatibles (pmcx0102,
     pmh0101, pmk8850, etc)
   - Add compatibles for the sama7d65 XLCD (Atmel), LAN9691 Flexcom
     (Microchip), and various MediaTek SCPSYS and regulator components
   - Fix a dead link to the audio codec binding in the DA9055
     documentation"

* tag 'mfd-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (41 commits)
  dt-bindings: mfd: da9055: Fix dead link to codec binding
  mfd: cgbc: Add support for backlight
  dt-bindings: mfd: qcom,spmi-pmic: Document PMICs present on Glymur and Kaanapali
  dt-bindings: mfd: Document smp-memram subnode for aspeed,ast2x00-scu
  mfd: intel-lpss: Add Intel Nova Lake-S PCI IDs
  mfd: ls2kbmc: Use PCI API instead of direct accesses
  mfd: ls2kbmc: Fully convert to use managed resources
  dt-bindings: mfd: mediatek: mt6397: Add missing MT6331 regulator compat
  dt-bindings: mfd: mediatek,mt8195-scpsys: Add mediatek,mt6795-scpsys
  dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,lan9691-flexcom
  mfd: omap-usb-host: Fix OF populate on driver rebind
  mfd: qcom-pm8xxx: Fix OF populate on driver rebind
  dt-bindings: mfd: syscon: Allow syscon compatible for mediatek,mt7981-topmisc
  mfd: qnap-mcu: Add driver data for TS133 variant
  dt-bindings: mfd: qnap,ts433-mcu: Add qnap,ts133-mcu compatible
  mfd: sec: Fix IRQ domain names duplication
  mfd: simple-mfd-i2c: Add Delta TN48M CPLD support
  mfd: macsmc: Initialize mutex
  dt-bindings: mfd: nxp: Add NXP LPC32xx System Control Block
  mfd: Kconfig: Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT
  ...

5 files changed, 128 insertions, 2 deletions

diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index 3c5aecf1d4b5..b352661d99a1 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -174,6 +174,9 @@ enum axp20x_variants {
 #define AXP717_ADC_DATA_SEL		0xcd
 #define AXP717_ADC_DATA_H		0xce
 #define AXP717_ADC_DATA_L		0xcf
+#define AXP717_TYPEC_CC_AA_EN		0xe1
+#define AXP717_TYPEC_CC_MODE_CONTROL	0xe3
+#define AXP717_TYPEC_CC_STATUS		0xe7
 
 #define AXP806_STARTUP_SRC		0x00
 #define AXP806_CHIP_ID			0x03
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 28170ee08898..7ffc904c864c 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -340,6 +340,123 @@ enum rk818_reg {
 #define RK818_USB_ILMIN_2000MA		0x7
 #define RK818_USB_CHG_SD_VSEL_MASK	0x70
 
+/* RK801 */
+enum rk801_reg {
+	RK801_ID_DCDC1,
+	RK801_ID_DCDC2,
+	RK801_ID_DCDC4,
+	RK801_ID_DCDC3,
+	RK801_ID_LDO1,
+	RK801_ID_LDO2,
+	RK801_ID_SWITCH,
+	RK801_ID_MAX,
+};
+
+#define RK801_SLP_REG_OFFSET		5
+#define RK801_NUM_REGULATORS		7
+
+#define RK801_HW_SYNC_US		32
+
+/* RK801 Register Definitions */
+#define RK801_ID_MSB			0x00
+#define RK801_ID_LSB			0x01
+#define RK801_OTP_VER_REG		0x02
+#define RK801_POWER_EN0_REG		0x03
+#define RK801_POWER_EN1_REG		0x04
+#define RK801_POWER_SLP_EN_REG		0x05
+#define RK801_POWER_FPWM_EN_REG		0x06
+#define RK801_SLP_LP_CONFIG_REG		0x07
+#define RK801_BUCK_CONFIG_REG		0x08
+#define RK801_BUCK1_ON_VSEL_REG		0x09
+#define RK801_BUCK2_ON_VSEL_REG		0x0a
+#define RK801_BUCK4_ON_VSEL_REG		0x0b
+#define RK801_LDO1_ON_VSEL_REG		0x0c
+#define RK801_LDO2_ON_VSEL_REG		0x0d
+#define RK801_BUCK1_SLP_VSEL_REG	0x0e
+#define RK801_BUCK2_SLP_VSEL_REG	0x0f
+#define RK801_BUCK4_SLP_VSEL_REG	0x10
+#define RK801_LDO1_SLP_VSEL_REG		0x11
+#define RK801_LDO2_SLP_VSEL_REG		0x12
+#define RK801_LDO_SW_IMAX_REG		0x13
+#define RK801_SYS_STS_REG		0x14
+#define RK801_SYS_CFG0_REG		0x15
+#define RK801_SYS_CFG1_REG		0x16
+#define RK801_SYS_CFG2_REG		0x17
+#define RK801_SYS_CFG3_REG		0x18
+#define RK801_SYS_CFG4_REG		0x19
+#define RK801_SLEEP_CFG_REG		0x1a
+#define RK801_ON_SOURCE_REG		0x1b
+#define RK801_OFF_SOURCE_REG		0x1c
+#define RK801_PWRON_KEY_REG		0x1d
+#define RK801_INT_STS0_REG		0x1e
+#define RK801_INT_MASK0_REG		0x1f
+#define RK801_INT_CONFIG_REG		0x20
+#define RK801_CON_BACK1_REG		0x21
+#define RK801_CON_BACK2_REG		0x22
+#define RK801_DATA_CON0_REG		0x23
+#define RK801_DATA_CON1_REG		0x24
+#define RK801_DATA_CON2_REG		0x25
+#define RK801_DATA_CON3_REG		0x26
+#define RK801_POWER_EXIT_SLP_SEQ0_REG	0x27
+#define RK801_POWER_EXIT_SLP_SEQ1_REG	0x28
+#define RK801_POWER_EXIT_SLP_SEQ2_REG	0x29
+#define RK801_POWER_EXIT_SLP_SEQ3_REG	0x2a
+#define RK801_POWER_ENTER_SLP_OR_SHTD_SEQ0_REG	0x2b
+#define RK801_POWER_ENTER_SLP_OR_SHTD_SEQ1_REG	0x2c
+#define RK801_POWER_ENTER_SLP_OR_SHTD_SEQ2_REG	0x2d
+#define RK801_POWER_ENTER_SLP_OR_SHTD_SEQ3_REG	0x2e
+#define RK801_BUCK_DEBUG1_REG		0x2f
+#define RK801_BUCK_DEBUG2_REG		0x30
+#define RK801_BUCK_DEBUG3_REG		0x31
+#define RK801_BUCK_DEBUG4_REG		0x32
+#define RK801_BUCK_DEBUG5_REG		0x33
+#define RK801_BUCK_DEBUG7_REG		0x34
+#define RK801_OTP_EN_CON_REG		0x35
+#define RK801_TEST_CON_REG		0x36
+#define RK801_EFUSE_CONTROL_REG		0x37
+#define RK801_SYS_CFG3_OTP_REG		0x38
+
+/* RK801 IRQ Definitions */
+#define RK801_IRQ_PWRON_FALL		0
+#define RK801_IRQ_PWRON_RISE		1
+#define RK801_IRQ_PWRON			2
+#define RK801_IRQ_PWRON_LP		3
+#define RK801_IRQ_HOTDIE		4
+#define RK801_IRQ_VDC_RISE		5
+#define RK801_IRQ_VDC_FALL		6
+#define RK801_IRQ_PWRON_FALL_MSK	BIT(0)
+#define RK801_IRQ_PWRON_RISE_MSK	BIT(1)
+#define RK801_IRQ_PWRON_MSK		BIT(2)
+#define RK801_IRQ_PWRON_LP_MSK		BIT(3)
+#define RK801_IRQ_HOTDIE_MSK		BIT(4)
+#define RK801_IRQ_VDC_RISE_MSK		BIT(5)
+#define RK801_IRQ_VDC_FALL_MSK		BIT(6)
+/* RK801_SLP_LP_CONFIG_REG */
+#define RK801_BUCK_SLP_LP_EN		BIT(3)
+#define RK801_PLDO_SLP_LP_EN		BIT(1)
+#define RK801_SLP_LP_MASK		(RK801_PLDO_SLP_LP_EN | RK801_BUCK_SLP_LP_EN)
+/* RK801_SLEEP_CFG_REG */
+#define RK801_SLEEP_FUN_MSK		0x3
+#define RK801_NONE_FUN			0x0
+#define RK801_SLEEP_FUN			0x1
+#define RK801_SHUTDOWN_FUN		0x2
+#define RK801_RESET_FUN			0x3
+/* RK801_SYS_CFG2_REG */
+#define RK801_SLEEP_POL_MSK		BIT(1)
+#define RK801_SLEEP_ACT_H		BIT(1)
+#define RK801_SLEEP_ACT_L		0
+#define RK801_RST_MSK			(0x3 << 4)
+#define RK801_RST_RESTART_PMU		(0x0 << 4)
+#define RK801_RST_RESTART_REG		(0x1 << 4)
+#define RK801_RST_RESTART_REG_RESETB	(0x2 << 4)
+/* RK801_INT_CONFIG_REG */
+#define RK801_INT_POL_MSK		BIT(1)
+#define RK801_INT_ACT_H			BIT(1)
+#define RK801_INT_ACT_L			0
+#define RK801_FPWM_MODE			1
+#define RK801_AUTO_PWM_MODE		0
+#define RK801_PLDO_HRDEC_EN		BIT(6)
+
 /* RK805 */
 enum rk805_reg {
 	RK805_ID_DCDC1,
@@ -1332,6 +1449,7 @@ enum {
 };
 
 enum {
+	RK801_ID = 0x8010,
 	RK805_ID = 0x8050,
 	RK806_ID = 0x8060,
 	RK808_ID = 0x0000,
diff --git a/include/linux/mfd/rohm-bd71828.h b/include/linux/mfd/rohm-bd71828.h
index 73a71ef69152..39fe275a8117 100644
--- a/include/linux/mfd/rohm-bd71828.h
+++ b/include/linux/mfd/rohm-bd71828.h
@@ -249,6 +249,8 @@ enum {
 #define BD71828_REG_BATCAP_MON_LIMIT_U	0xcc
 #define BD71828_REG_CONF		0x64
 
+#define BD71828_REG_ILIM_STAT		0x6d
+#define BD71828_REG_DCIN_SET		0x70
 #define BD71828_REG_DCIN_CLPS		0x71
 
 #define BD71828_REG_MEAS_CLEAR		0xaf
diff --git a/include/linux/mfd/tps6105x.h b/include/linux/mfd/tps6105x.h
index b1313411ef09..94e699896240 100644
--- a/include/linux/mfd/tps6105x.h
+++ b/include/linux/mfd/tps6105x.h
@@ -53,7 +53,7 @@
 /**
  * enum tps6105x_mode - desired mode for the TPS6105x
  * @TPS6105X_MODE_SHUTDOWN: this instance is inactive, not used for anything
- * @TPS61905X_MODE_TORCH: this instance is used as a LED, usually a while
+ * @TPS6105X_MODE_TORCH: this instance is used as a LED, usually a while
  *	LED, for example as backlight or flashlight. If this is set, the
  *	TPS6105X will register to the LED framework
  * @TPS6105X_MODE_TORCH_FLASH: this instance is used as a flashgun, usually
@@ -82,7 +82,8 @@ struct tps6105x_platform_data {
 
 /**
  * struct tps6105x - state holder for the TPS6105x drivers
- * @i2c_client: corresponding I2C client
+ * @pdata: associated platform data
+ * @client: corresponding I2C client
  * @regulator: regulator device if used in voltage mode
  * @regmap: used for i2c communcation on accessing registers
  */
diff --git a/include/linux/mfd/tps65219.h b/include/linux/mfd/tps65219.h
index 55234e771ba7..3abf937191d0 100644
--- a/include/linux/mfd/tps65219.h
+++ b/include/linux/mfd/tps65219.h
@@ -149,6 +149,8 @@ enum pmic_id {
 #define TPS65215_ENABLE_LDO2_EN_MASK                    BIT(5)
 #define TPS65214_ENABLE_LDO1_EN_MASK			BIT(5)
 #define TPS65219_ENABLE_LDO4_EN_MASK			BIT(6)
+/* Register Unlock */
+#define TPS65214_LOCK_ACCESS_CMD			0x5a
 /* power ON-OFF sequence slot */
 #define TPS65219_BUCKS_LDOS_SEQUENCE_OFF_SLOT_MASK	GENMASK(3, 0)
 #define TPS65219_BUCKS_LDOS_SEQUENCE_ON_SLOT_MASK	GENMASK(7, 4)