diff options
| author | Vladimir Zapolskiy <vz@mleia.com> | 2025-12-26 02:02:37 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2026-01-07 16:13:19 +0100 |
| commit | 6e0e8375f2e6854e8c35faa638f4448e3b8209af (patch) | |
| tree | b8b0ae758e74618835f9a7f787012d13d0c4dfda /include/linux | |
| parent | 065a923dd5837ff7dc87419c5755e26d5b111f3a (diff) | |
usb: isp1362-hcd: remove Philips ISP1362 USB OTG controller driver
The last user of the platform driver was a Blackfin BF533 powered board,
and it was removed in commit 4ba66a976072 ("arch: remove blackfin port")
along with the whole Blackfin architecture support 7 years ago.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251226000237.1440642-1-vz@mleia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/usb/isp1362.h | 47 |
1 files changed, 0 insertions, 47 deletions
diff --git a/include/linux/usb/isp1362.h b/include/linux/usb/isp1362.h deleted file mode 100644 index 5356c4ae386e..000000000000 --- a/include/linux/usb/isp1362.h +++ /dev/null @@ -1,47 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * board initialization code should put one of these into dev->platform_data - * and place the isp1362 onto platform_bus. - */ - -#ifndef __LINUX_USB_ISP1362_H__ -#define __LINUX_USB_ISP1362_H__ - -struct isp1362_platform_data { - /* Enable internal pulldown resistors on downstream ports */ - unsigned sel15Kres:1; - /* Clock cannot be stopped */ - unsigned clknotstop:1; - /* On-chip overcurrent protection */ - unsigned oc_enable:1; - /* INT output polarity */ - unsigned int_act_high:1; - /* INT edge or level triggered */ - unsigned int_edge_triggered:1; - /* DREQ output polarity */ - unsigned dreq_act_high:1; - /* DACK input polarity */ - unsigned dack_act_high:1; - /* chip can be resumed via H_WAKEUP pin */ - unsigned remote_wakeup_connected:1; - /* Switch or not to switch (keep always powered) */ - unsigned no_power_switching:1; - /* Ganged port power switching (0) or individual port power switching (1) */ - unsigned power_switching_mode:1; - /* Given port_power, msec/2 after power on till power good */ - u8 potpg; - /* Hardware reset set/clear */ - void (*reset) (struct device *dev, int set); - /* Clock start/stop */ - void (*clock) (struct device *dev, int start); - /* Inter-io delay (ns). The chip is picky about access timings; it - * expects at least: - * 110ns delay between consecutive accesses to DATA_REG, - * 300ns delay between access to ADDR_REG and DATA_REG (registers) - * 462ns delay between access to ADDR_REG and DATA_REG (buffer memory) - * WE MUST NOT be activated during these intervals (even without CS!) - */ - void (*delay) (struct device *dev, unsigned int delay); -}; - -#endif |