Merge tag 'sound-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "It's been busy summer weeks and hence lots of changes, partly for a
  few new drivers and partly for a wide range of fixes.

  Here are highlights:

  ALSA Core:
   - Fix rawmidi buffer management, code cleanup / refactoring
   - Fix the SG-buffer page handling with incorrect fallback size
   - Fix the stall at virmidi trigger callback with a large buffer; also
     offloading and code-refactoring along with it
   - Various ALSA sequencer code cleanups

  ASoC:
   - Deploy the standard snd_pcm_stop_xrun() helper in several drivers
   - Support for providing name prefixes to generic component nodes
   - Quite a few fixes for DPCM as it gains a bit wider use and more
     robust testing
   - Generalization of the DIO2125 support to a simple amplifier driver
   - Accessory detection support for the audio graph card
   - DT support for PXA AC'97 devices
   - Quirks for a number of new x86 systems
   - Support for AM Logic Meson, Everest ES7154, Intel systems with
     RT5682, Qualcomm QDSP6 and WCD9335, Realtek RT5682 and TI TAS5707

  HD-audio:
   - Code refactoring in HD-audio ext codec codes to drop own classes;
     preliminary works for the upcoming legacy codec support
   - Generalized DRM audio component for the upcoming radeon / amdgpu
     support
   - Unification of mic mute-LED and GPIO support for various codecs
   - Further improvement of CA0132 codec support including Recon3D
   - Proper vga_switcheroo handling for AMD i-GPU
   - Update of model list in documentation
   - Fixups for another HP Spectre x360, Conexant codecs, power-save
     blacklist update

  USB-audio:
   - Fix the invalid sample rate setup with external clock
   - Support of UAC3 selector units and processing units
   - Basic UAC3 power-domain support
   - Support for Encore mDSD and Thesycon-based DSD devices
   - Preparation for future complete callback changes

  Firewire:
   - Add support for MOTU Traveler

  Misc:
   - The endianess notation fixes in various drivers
   - Add fall-through comment in lots of drivers
   - Various sparse warning fixes, e.g. about PCM format types"

* tag 'sound-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (529 commits)
  ASoC: adav80x: mark expected switch fall-through
  ASoC: da7219: Add delays to capture path to remove DC offset noise
  ALSA: usb-audio: Mark expected switch fall-through
  ALSA: mixart: Mark expected switch fall-through
  ALSA: opl3: Mark expected switch fall-through
  ALSA: hda/ca0132 - Add exit commands for Recon3D
  ALSA: hda/ca0132 - Change mixer controls for Recon3D
  ALSA: hda/ca0132 - Add Recon3D input and output select commands
  ALSA: hda/ca0132 - Add DSP setup defaults for Recon3D
  ALSA: hda/ca0132 - Add Recon3D startup functions and setup
  ALSA: hda/ca0132 - Add bool variable to enable/disable pci region2 mmio
  ALSA: hda/ca0132 - Add Recon3D pincfg
  ALSA: hda/ca0132 - Add quirk ID and enum for Recon3D
  ALSA: hda/ca0132 - Add alt_functions unsolicited response
  ALSA: hda/ca0132 - Clean up ca0132_init function.
  ALSA: hda/ca0132 - Create mmio gpio function to make code clearer
  ASoC: wm_adsp: Make DSP name configurable by codec driver
  ASoC: wm_adsp: Declare firmware controls from codec driver
  ASoC: max98373: Added software reset register to readable registers
  ASoC: wm_adsp: Correct DSP pointer for preloader control
  ...

7 files changed, 103 insertions, 6 deletions

diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index b7cfa037e593..08b1aa70a38d 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -38,6 +38,8 @@
 #define CLK_IS_CRITICAL		BIT(11) /* do not gate, ever */
 /* parents need enable during gate/ungate, set rate and re-parent */
 #define CLK_OPS_PARENT_ENABLE	BIT(12)
+/* duty cycle call may be forwarded to the parent clock */
+#define CLK_DUTY_CYCLE_PARENT	BIT(13)
 
 struct clk;
 struct clk_hw;
@@ -67,6 +69,17 @@ struct clk_rate_request {
 };
 
 /**
+ * struct clk_duty - Struture encoding the duty cycle ratio of a clock
+ *
+ * @num:	Numerator of the duty cycle ratio
+ * @den:	Denominator of the duty cycle ratio
+ */
+struct clk_duty {
+	unsigned int num;
+	unsigned int den;
+};
+
+/**
  * struct clk_ops -  Callback operations for hardware clocks; these are to
  * be provided by the clock implementation, and will be called by drivers
  * through the clk_* api.
@@ -169,6 +182,15 @@ struct clk_rate_request {
  *		by the second argument. Valid values for degrees are
  *		0-359. Return 0 on success, otherwise -EERROR.
  *
+ * @get_duty_cycle: Queries the hardware to get the current duty cycle ratio
+ *              of a clock. Returned values denominator cannot be 0 and must be
+ *              superior or equal to the numerator.
+ *
+ * @set_duty_cycle: Apply the duty cycle ratio to this clock signal specified by
+ *              the numerator (2nd argurment) and denominator (3rd  argument).
+ *              Argument must be a valid ratio (denominator > 0
+ *              and >= numerator) Return 0 on success, otherwise -EERROR.
+ *
  * @init:	Perform platform-specific initialization magic.
  *		This is not not used by any of the basic clock types.
  *		Please consider other ways of solving initialization problems
@@ -218,6 +240,10 @@ struct clk_ops {
 					   unsigned long parent_accuracy);
 	int		(*get_phase)(struct clk_hw *hw);
 	int		(*set_phase)(struct clk_hw *hw, int degrees);
+	int		(*get_duty_cycle)(struct clk_hw *hw,
+					  struct clk_duty *duty);
+	int		(*set_duty_cycle)(struct clk_hw *hw,
+					  struct clk_duty *duty);
 	void		(*init)(struct clk_hw *hw);
 	void		(*debug_init)(struct clk_hw *hw, struct dentry *dentry);
 };
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 0dbd0885b2c2..4f750c481b82 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -142,6 +142,27 @@ int clk_set_phase(struct clk *clk, int degrees);
 int clk_get_phase(struct clk *clk);
 
 /**
+ * clk_set_duty_cycle - adjust the duty cycle ratio of a clock signal
+ * @clk: clock signal source
+ * @num: numerator of the duty cycle ratio to be applied
+ * @den: denominator of the duty cycle ratio to be applied
+ *
+ * Adjust the duty cycle of a clock signal by the specified ratio. Returns 0 on
+ * success, -EERROR otherwise.
+ */
+int clk_set_duty_cycle(struct clk *clk, unsigned int num, unsigned int den);
+
+/**
+ * clk_get_duty_cycle - return the duty cycle ratio of a clock signal
+ * @clk: clock signal source
+ * @scale: scaling factor to be applied to represent the ratio as an integer
+ *
+ * Returns the duty cycle ratio multiplied by the scale provided, otherwise
+ * returns -EERROR.
+ */
+int clk_get_scaled_duty_cycle(struct clk *clk, unsigned int scale);
+
+/**
  * clk_is_match - check if two clk's point to the same hardware clock
  * @p: clk compared against q
  * @q: clk compared against p
@@ -183,6 +204,18 @@ static inline long clk_get_phase(struct clk *clk)
 	return -ENOTSUPP;
 }
 
+static inline int clk_set_duty_cycle(struct clk *clk, unsigned int num,
+				     unsigned int den)
+{
+	return -ENOTSUPP;
+}
+
+static inline unsigned int clk_get_scaled_duty_cycle(struct clk *clk,
+						     unsigned int scale)
+{
+	return 0;
+}
+
 static inline bool clk_is_match(const struct clk *p, const struct clk *q)
 {
 	return p == q;
diff --git a/include/linux/dma/pxa-dma.h b/include/linux/dma/pxa-dma.h
index e56ec7af4fd7..9fc594f69eff 100644
--- a/include/linux/dma/pxa-dma.h
+++ b/include/linux/dma/pxa-dma.h
@@ -9,6 +9,15 @@ enum pxad_chan_prio {
 	PXAD_PRIO_LOWEST,
 };
 
+/**
+ * struct pxad_param - dma channel request parameters
+ * @drcmr: requestor line number
+ * @prio: minimal mandatory priority of the channel
+ *
+ * If a requested channel is granted, its priority will be at least @prio,
+ * ie. if PXAD_PRIO_LOW is required, the requested channel will be either
+ * PXAD_PRIO_LOW, PXAD_PRIO_NORMAL or PXAD_PRIO_HIGHEST.
+ */
 struct pxad_param {
 	unsigned int drcmr;
 	enum pxad_chan_prio prio;
diff --git a/include/linux/platform_data/mmp_dma.h b/include/linux/platform_data/mmp_dma.h
index d1397c8ed94e..6397b9c8149a 100644
--- a/include/linux/platform_data/mmp_dma.h
+++ b/include/linux/platform_data/mmp_dma.h
@@ -12,9 +12,13 @@
 #ifndef MMP_DMA_H
 #define MMP_DMA_H
 
+struct dma_slave_map;
+
 struct mmp_dma_platdata {
 	int dma_channels;
 	int nb_requestors;
+	int slave_map_cnt;
+	const struct dma_slave_map *slave_map;
 };
 
 #endif /* MMP_DMA_H */
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 8461b18e4608..13b4244d44c1 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -171,6 +171,14 @@
 #define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass */
 #define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
 #define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */
+#define SSACD_ACDS_1		(0)
+#define SSACD_ACDS_2		(1)
+#define SSACD_ACDS_4		(2)
+#define SSACD_ACDS_8		(3)
+#define SSACD_ACDS_16		(4)
+#define SSACD_ACDS_32		(5)
+#define SSACD_SCDB_4X		(0)
+#define SSACD_SCDB_1X		(1)
 #define SSACD_SCDX8		(1 << 7)	/* SYSCLK division ratio select */
 
 /* LPSS SSP */
@@ -212,8 +220,6 @@ struct ssp_device {
 	int		type;
 	int		use_count;
 	int		irq;
-	int		drcmr_rx;
-	int		drcmr_tx;
 
 	struct device_node	*of_node;
 };
diff --git a/include/linux/usb/audio-v3.h b/include/linux/usb/audio-v3.h
index a710e28b5215..6b708434b7f9 100644
--- a/include/linux/usb/audio-v3.h
+++ b/include/linux/usb/audio-v3.h
@@ -387,6 +387,12 @@ struct uac3_interrupt_data_msg {
 #define UAC3_CONNECTORS			0x0f
 #define UAC3_POWER_DOMAIN		0x10
 
+/* A.20 PROCESSING UNIT PROCESS TYPES */
+#define UAC3_PROCESS_UNDEFINED		0x00
+#define UAC3_PROCESS_UP_DOWNMIX		0x01
+#define UAC3_PROCESS_STEREO_EXTENDER	0x02
+#define UAC3_PROCESS_MULTI_FUNCTION	0x03
+
 /* A.22 AUDIO CLASS-SPECIFIC REQUEST CODES */
 /* see audio-v2.h for the rest, which is identical to v2 */
 #define UAC3_CS_REQ_INTEN			0x04
@@ -406,6 +412,15 @@ struct uac3_interrupt_data_msg {
 #define UAC3_TE_OVERFLOW			0x04
 #define UAC3_TE_LATENCY 			0x05
 
+/* A.23.10 PROCESSING UNITS CONTROL SELECTROS */
+
+/* Up/Down Mixer */
+#define UAC3_UD_MODE_SELECT			0x01
+
+/* Stereo Extender */
+#define UAC3_EXT_WIDTH_CONTROL			0x01
+
+
 /* BADD predefined Unit/Terminal values */
 #define UAC3_BADD_IT_ID1	1  /* Input Terminal ID1: bTerminalID = 1 */
 #define UAC3_BADD_FU_ID2	2  /* Feature Unit ID2: bUnitID = 2 */
@@ -432,4 +447,8 @@ struct uac3_interrupt_data_msg {
 /* BADD sample rate is always fixed to 48kHz */
 #define UAC3_BADD_SAMPLING_RATE				48000
 
+/* BADD power domains recovery times in 50us increments */
+#define UAC3_BADD_PD_RECOVER_D1D0			0x0258	/* 30ms */
+#define UAC3_BADD_PD_RECOVER_D2D0			0x1770	/* 300ms */
+
 #endif /* __LINUX_USB_AUDIO_V3_H */
diff --git a/include/linux/vga_switcheroo.h b/include/linux/vga_switcheroo.h
index 77f0f0af3a71..a34539b7f750 100644
--- a/include/linux/vga_switcheroo.h
+++ b/include/linux/vga_switcheroo.h
@@ -84,8 +84,8 @@ enum vga_switcheroo_state {
  * Client identifier. Audio clients use the same identifier & 0x100.
  */
 enum vga_switcheroo_client_id {
-	VGA_SWITCHEROO_UNKNOWN_ID = -1,
-	VGA_SWITCHEROO_IGD,
+	VGA_SWITCHEROO_UNKNOWN_ID = 0x1000,
+	VGA_SWITCHEROO_IGD = 0,
 	VGA_SWITCHEROO_DIS,
 	VGA_SWITCHEROO_MAX_CLIENTS,
 };
@@ -151,7 +151,7 @@ int vga_switcheroo_register_client(struct pci_dev *dev,
 				   bool driver_power_control);
 int vga_switcheroo_register_audio_client(struct pci_dev *pdev,
 					 const struct vga_switcheroo_client_ops *ops,
-					 enum vga_switcheroo_client_id id);
+					 struct pci_dev *vga_dev);
 
 void vga_switcheroo_client_fb_set(struct pci_dev *dev,
 				  struct fb_info *info);
@@ -180,7 +180,7 @@ static inline int vga_switcheroo_register_handler(const struct vga_switcheroo_ha
 		enum vga_switcheroo_handler_flags_t handler_flags) { return 0; }
 static inline int vga_switcheroo_register_audio_client(struct pci_dev *pdev,
 	const struct vga_switcheroo_client_ops *ops,
-	enum vga_switcheroo_client_id id) { return 0; }
+	struct pci_dev *vga_dev) { return 0; }
 static inline void vga_switcheroo_unregister_handler(void) {}
 static inline enum vga_switcheroo_handler_flags_t vga_switcheroo_handler_flags(void) { return 0; }
 static inline int vga_switcheroo_lock_ddc(struct pci_dev *pdev) { return -ENODEV; }