Merge tag 'tty-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial driver updates from Greg KH:
 "Here is the big set of TTY and Serial driver updates for 7.2-rc1.

  Overall we end up removing more code than added, due to an obsolete
  synclink_gt driver being removed from the tree, always a nice thing to
  see happen.

  Other than that driver removal, major things included in here are:

   - max310x serial driver updates and fixes

   - 8250 driver updates and rework in places to make it more "modern"

   - dts file updates

   - serial driver core tweaks and updates

   - vt code cleanups

   - vc_screen crash fixes

   - other minor driver updates and cleanups

  All of these have been in linux-next for well over a week with no
  reported issues"

* tag 'tty-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits)
  serial: 8250_pci: Don't specify conflicting values to pci_device_id members
  vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write
  serial: qcom_geni: Fix RX DMA stall when SE_DMA_RX_LEN_IN is zero
  vt: merge ucs_is_zero_width()/ucs_is_double_width() into ucs_get_width()
  serial: 8250: fix possible ISR soft lockup
  dt-bindings: serial: rs485: remove deprecated .txt binding stub
  serial: qcom-geni: trace: Add tracepoint support for Qualcomm GENI serial
  tty: serial: Use named initializers for arrays of i2c_device_data
  serial: 8250_dw: remove clock-notifier infrastructure
  serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails
  amba/serial: amba-pl011: Bring back zx29 UART support
  serial: 8250: Add support for console flow control
  serial: 8250: Check LSR timeout on console flow control
  serial: 8250: Set cons_flow on port registration
  tty: serial: 8250: protect against NULL uart->port.dev in register
  arm64: dts: add support for A9 based Amlogic BY401
  dt-bindings: arm: amlogic: add A311Y3 support
  serial: max310x: fix compile errors if CONFIG_SPI_MASTER is disabled
  serial: qcom-geni: Avoid probing debug console UART without console support
  serial: max310x: add comments for PLL limits
  ...

1 files changed, 164 insertions, 0 deletions

diff --git a/include/trace/events/qcom_geni_serial.h b/include/trace/events/qcom_geni_serial.h
new file mode 100644
index 000000000000..417ec01f9fc8
--- /dev/null
+++ b/include/trace/events/qcom_geni_serial.h
@@ -0,0 +1,164 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM qcom_geni_serial
+
+#if !defined(_TRACE_QCOM_GENI_SERIAL_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_QCOM_GENI_SERIAL_H
+
+#include <linux/device.h>
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(geni_serial_set_termios,
+	    TP_PROTO(struct device *dev, unsigned int baud,
+		     unsigned int bits_per_char, u32 tx_trans_cfg,
+		     u32 tx_parity_cfg, u32 rx_trans_cfg,
+		     u32 rx_parity_cfg, u32 stop_bit_len),
+	    TP_ARGS(dev, baud, bits_per_char, tx_trans_cfg, tx_parity_cfg,
+		    rx_trans_cfg, rx_parity_cfg, stop_bit_len),
+
+	    TP_STRUCT__entry(__string(name, dev_name(dev))
+			     __field(unsigned int, baud)
+			     __field(unsigned int, bits_per_char)
+			     __field(u32, tx_trans_cfg)
+			     __field(u32, tx_parity_cfg)
+			     __field(u32, rx_trans_cfg)
+			     __field(u32, rx_parity_cfg)
+			     __field(u32, stop_bit_len)
+	    ),
+
+	    TP_fast_assign(__assign_str(name);
+			   __entry->baud = baud;
+			   __entry->bits_per_char = bits_per_char;
+			   __entry->tx_trans_cfg = tx_trans_cfg;
+			   __entry->tx_parity_cfg = tx_parity_cfg;
+			   __entry->rx_trans_cfg = rx_trans_cfg;
+			   __entry->rx_parity_cfg = rx_parity_cfg;
+			   __entry->stop_bit_len = stop_bit_len;
+	    ),
+
+	    TP_printk("%s: baud=%u bpc=%u tx_trans=0x%08x tx_par=0x%08x rx_trans=0x%08x rx_par=0x%08x stop=%u",
+		      __get_str(name), __entry->baud, __entry->bits_per_char,
+		      __entry->tx_trans_cfg, __entry->tx_parity_cfg,
+		      __entry->rx_trans_cfg, __entry->rx_parity_cfg,
+		      __entry->stop_bit_len)
+);
+
+TRACE_EVENT(geni_serial_clk_cfg,
+	    TP_PROTO(struct device *dev, unsigned int desired_rate,
+		     unsigned long clk_rate, unsigned int clk_div,
+		     unsigned int clk_idx),
+	    TP_ARGS(dev, desired_rate, clk_rate, clk_div, clk_idx),
+
+	    TP_STRUCT__entry(__string(name, dev_name(dev))
+			     __field(unsigned int, desired_rate)
+			     __field(unsigned long, clk_rate)
+			     __field(unsigned int, clk_div)
+			     __field(unsigned int, clk_idx)
+	    ),
+
+	    TP_fast_assign(__assign_str(name);
+			   __entry->desired_rate = desired_rate;
+			   __entry->clk_rate = clk_rate;
+			   __entry->clk_div = clk_div;
+			   __entry->clk_idx = clk_idx;
+	    ),
+
+	    TP_printk("%s: desired_rate=%u clk_rate=%lu clk_div=%u clk_idx=%u",
+		      __get_str(name), __entry->desired_rate, __entry->clk_rate,
+		      __entry->clk_div, __entry->clk_idx)
+);
+
+TRACE_EVENT(geni_serial_irq,
+	    TP_PROTO(struct device *dev, u32 m_irq, u32 s_irq,
+		     u32 dma_tx, u32 dma_rx),
+	    TP_ARGS(dev, m_irq, s_irq, dma_tx, dma_rx),
+
+	    TP_STRUCT__entry(__string(name, dev_name(dev))
+			     __field(u32, m_irq)
+			     __field(u32, s_irq)
+			     __field(u32, dma_tx)
+			     __field(u32, dma_rx)
+	    ),
+
+	    TP_fast_assign(__assign_str(name);
+			   __entry->m_irq = m_irq;
+			   __entry->s_irq = s_irq;
+			   __entry->dma_tx = dma_tx;
+			   __entry->dma_rx = dma_rx;
+	    ),
+
+	    TP_printk("%s: m_irq=0x%08x s_irq=0x%08x dma_tx=0x%08x dma_rx=0x%08x",
+		      __get_str(name), __entry->m_irq, __entry->s_irq,
+		      __entry->dma_tx, __entry->dma_rx)
+);
+
+DECLARE_EVENT_CLASS(geni_serial_data,
+		    TP_PROTO(struct device *dev, const u8 *buf, unsigned int len),
+		    TP_ARGS(dev, buf, len),
+
+		    TP_STRUCT__entry(__string(name, dev_name(dev))
+				     __field(unsigned int, len)
+				     __dynamic_array(u8, data, len)
+		    ),
+
+		    TP_fast_assign(__assign_str(name);
+				   __entry->len = len;
+				   memcpy(__get_dynamic_array(data), buf, len);
+		    ),
+
+		    TP_printk("%s: len=%u data=%s",
+			      __get_str(name), __entry->len,
+			      __print_hex(__get_dynamic_array(data), __entry->len))
+);
+
+DEFINE_EVENT(geni_serial_data, geni_serial_tx_data,
+	     TP_PROTO(struct device *dev, const u8 *buf, unsigned int len),
+	     TP_ARGS(dev, buf, len)
+);
+
+DEFINE_EVENT(geni_serial_data, geni_serial_rx_data,
+	     TP_PROTO(struct device *dev, const u8 *buf, unsigned int len),
+	     TP_ARGS(dev, buf, len)
+);
+
+TRACE_EVENT(geni_serial_set_mctrl,
+	    TP_PROTO(struct device *dev, unsigned int mctrl,
+		     u32 uart_manual_rfr),
+	    TP_ARGS(dev, mctrl, uart_manual_rfr),
+
+	    TP_STRUCT__entry(__string(name, dev_name(dev))
+			     __field(unsigned int, mctrl)
+			     __field(u32, uart_manual_rfr)
+	    ),
+
+	    TP_fast_assign(__assign_str(name);
+			   __entry->mctrl = mctrl;
+			   __entry->uart_manual_rfr = uart_manual_rfr;
+	    ),
+
+	    TP_printk("%s: mctrl=0x%04x uart_manual_rfr=0x%08x",
+		      __get_str(name), __entry->mctrl, __entry->uart_manual_rfr)
+);
+
+TRACE_EVENT(geni_serial_get_mctrl,
+	    TP_PROTO(struct device *dev, unsigned int mctrl, u32 geni_ios),
+	    TP_ARGS(dev, mctrl, geni_ios),
+
+	    TP_STRUCT__entry(__string(name, dev_name(dev))
+			     __field(unsigned int, mctrl)
+			     __field(u32, geni_ios)
+	    ),
+
+	    TP_fast_assign(__assign_str(name);
+			   __entry->mctrl = mctrl;
+			   __entry->geni_ios = geni_ios;
+	    ),
+
+	    TP_printk("%s: mctrl=0x%04x geni_ios=0x%08x",
+		      __get_str(name), __entry->mctrl, __entry->geni_ios)
+);
+
+#endif /* _TRACE_QCOM_GENI_SERIAL_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>