Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Platform regulatory domain support for ath10k, from Bartosz
    Markowski.

 2) Centralize min/max MTU checking, thus removing tons of duplicated
    code all of the the various drivers. From Jarod Wilson.

 3) Support ingress actions in act_mirred, from Shmulik Ladkani.

 4) Improve device adjacency tracking, from David Ahern.

 5) Add support for LED triggers on PHY link state changes, from Zach
    Brown.

 6) Improve UDP socket memory accounting, from Paolo Abeni.

 7) Set SK_MEM_QUANTUM to a fixed size of 4096, instead of PAGE_SIZE.
    From Eric Dumazet.

 8) Collapse TCP SKBs at retransmit time even if the right side SKB has
    frags. Also from Eric Dumazet.

 9) Add IP_RECVFRAGSIZE and IPV6_RECVFRAGSIZE cmsgs, from Willem de
    Bruijn.

10) Support routing by UID, from Lorenzo Colitti.

11) Handle L3 domain binding (ie. VRF) for RAW sockets, from David
    Ahern.

12) tcp_get_info() can run lockless, from Eric Dumazet.

13) 4-tuple UDP hashing in SFC driver, from Edward Cree.

14) Avoid reorders in GRO code, from Eric Dumazet.

15) IPV6 Segment Routing support, from David Lebrun.

16) Support MPLS push and pop for L3 packets in openvswitch, from Jiri
    Benc.

17) Add LRU datastructure support for BPF, Martin KaFai Lau.

18) VF support in liquidio driver, from Raghu Vatsavayi.

19) Multiqueue support in alx driver, from Tobias Regnery.

20) Networking cgroup BPF support, from Daniel Mack.

21) TCP chronograph measurements, from Francis Yan.

22) XDP support for qed driver, from Yuval Mintz.

23) BPF based lwtunnels, from Thomas Graf.

24) Consistent FIB dumping to offloading drivers, from Ido Schimmel.

25) Many optimizations for UDP under high load, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
  netfilter: nft_counter: rework atomic dump and reset
  e1000: use disable_hardirq() for e1000_netpoll()
  i40e: don't truncate match_method assignment
  net: ethernet: ti: netcp: add support of cpts
  net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause
  net: l2tp: ppp: change PPPOL2TP_MSG_* => L2TP_MSG_*
  net: l2tp: deprecate PPPOL2TP_MSG_* in favour of L2TP_MSG_*
  net: l2tp: export debug flags to UAPI
  net: ethernet: stmmac: remove private tx queue lock
  net: ethernet: sxgbe: remove private tx queue lock
  net: bridge: shorten ageing time on topology change
  net: bridge: add helper to set topology change
  net: bridge: add helper to offload ageing time
  net: nicvf: use new api ethtool_{get|set}_link_ksettings
  net: ethernet: ti: cpsw: sync rates for channels in dual emac mode
  net: ethernet: ti: cpsw: re-split res only when speed is changed
  net: ethernet: ti: cpsw: combine budget and weight split and check
  net: ethernet: ti: cpsw: don't start queue twice
  net: ethernet: ti: cpsw: use same macros to get active slave
  net: mvneta: select GENERIC_ALLOCATOR
  ...

1 files changed, 363 insertions, 279 deletions

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index f09c70b97eca..0eb0e87dbe9f 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -73,6 +73,8 @@ enum bpf_cmd {
 	BPF_PROG_LOAD,
 	BPF_OBJ_PIN,
 	BPF_OBJ_GET,
+	BPF_PROG_ATTACH,
+	BPF_PROG_DETACH,
 };
 
 enum bpf_map_type {
@@ -85,6 +87,8 @@ enum bpf_map_type {
 	BPF_MAP_TYPE_PERCPU_ARRAY,
 	BPF_MAP_TYPE_STACK_TRACE,
 	BPF_MAP_TYPE_CGROUP_ARRAY,
+	BPF_MAP_TYPE_LRU_HASH,
+	BPF_MAP_TYPE_LRU_PERCPU_HASH,
 };
 
 enum bpf_prog_type {
@@ -96,8 +100,22 @@ enum bpf_prog_type {
 	BPF_PROG_TYPE_TRACEPOINT,
 	BPF_PROG_TYPE_XDP,
 	BPF_PROG_TYPE_PERF_EVENT,
+	BPF_PROG_TYPE_CGROUP_SKB,
+	BPF_PROG_TYPE_CGROUP_SOCK,
+	BPF_PROG_TYPE_LWT_IN,
+	BPF_PROG_TYPE_LWT_OUT,
+	BPF_PROG_TYPE_LWT_XMIT,
 };
 
+enum bpf_attach_type {
+	BPF_CGROUP_INET_INGRESS,
+	BPF_CGROUP_INET_EGRESS,
+	BPF_CGROUP_INET_SOCK_CREATE,
+	__MAX_BPF_ATTACH_TYPE
+};
+
+#define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE
+
 #define BPF_PSEUDO_MAP_FD	1
 
 /* flags for BPF_MAP_UPDATE_ELEM command */
@@ -106,6 +124,13 @@ enum bpf_prog_type {
 #define BPF_EXIST	2 /* update existing element */
 
 #define BPF_F_NO_PREALLOC	(1U << 0)
+/* Instead of having one common LRU list in the
+ * BPF_MAP_TYPE_LRU_[PERCPU_]HASH map, use a percpu LRU list
+ * which can scale and perform better.
+ * Note, the LRU nodes (including free nodes) cannot be moved
+ * across different LRU lists.
+ */
+#define BPF_F_NO_COMMON_LRU	(1U << 1)
 
 union bpf_attr {
 	struct { /* anonymous struct used by BPF_MAP_CREATE command */
@@ -141,293 +166,327 @@ union bpf_attr {
 		__aligned_u64	pathname;
 		__u32		bpf_fd;
 	};
+
+	struct { /* anonymous struct used by BPF_PROG_ATTACH/DETACH commands */
+		__u32		target_fd;	/* container object to attach to */
+		__u32		attach_bpf_fd;	/* eBPF program to attach */
+		__u32		attach_type;
+	};
 } __attribute__((aligned(8)));
 
+/* BPF helper function descriptions:
+ *
+ * void *bpf_map_lookup_elem(&map, &key)
+ *     Return: Map value or NULL
+ *
+ * int bpf_map_update_elem(&map, &key, &value, flags)
+ *     Return: 0 on success or negative error
+ *
+ * int bpf_map_delete_elem(&map, &key)
+ *     Return: 0 on success or negative error
+ *
+ * int bpf_probe_read(void *dst, int size, void *src)
+ *     Return: 0 on success or negative error
+ *
+ * u64 bpf_ktime_get_ns(void)
+ *     Return: current ktime
+ *
+ * int bpf_trace_printk(const char *fmt, int fmt_size, ...)
+ *     Return: length of buffer written or negative error
+ *
+ * u32 bpf_prandom_u32(void)
+ *     Return: random value
+ *
+ * u32 bpf_raw_smp_processor_id(void)
+ *     Return: SMP processor ID
+ *
+ * int bpf_skb_store_bytes(skb, offset, from, len, flags)
+ *     store bytes into packet
+ *     @skb: pointer to skb
+ *     @offset: offset within packet from skb->mac_header
+ *     @from: pointer where to copy bytes from
+ *     @len: number of bytes to store into packet
+ *     @flags: bit 0 - if true, recompute skb->csum
+ *             other bits - reserved
+ *     Return: 0 on success or negative error
+ *
+ * int bpf_l3_csum_replace(skb, offset, from, to, flags)
+ *     recompute IP checksum
+ *     @skb: pointer to skb
+ *     @offset: offset within packet where IP checksum is located
+ *     @from: old value of header field
+ *     @to: new value of header field
+ *     @flags: bits 0-3 - size of header field
+ *             other bits - reserved
+ *     Return: 0 on success or negative error
+ *
+ * int bpf_l4_csum_replace(skb, offset, from, to, flags)
+ *     recompute TCP/UDP checksum
+ *     @skb: pointer to skb
+ *     @offset: offset within packet where TCP/UDP checksum is located
+ *     @from: old value of header field
+ *     @to: new value of header field
+ *     @flags: bits 0-3 - size of header field
+ *             bit 4 - is pseudo header
+ *             other bits - reserved
+ *     Return: 0 on success or negative error
+ *
+ * int bpf_tail_call(ctx, prog_array_map, index)
+ *     jump into another BPF program
+ *     @ctx: context pointer passed to next program
+ *     @prog_array_map: pointer to map which type is BPF_MAP_TYPE_PROG_ARRAY
+ *     @index: index inside array that selects specific program to run
+ *     Return: 0 on success or negative error
+ *
+ * int bpf_clone_redirect(skb, ifindex, flags)
+ *     redirect to another netdev
+ *     @skb: pointer to skb
+ *     @ifindex: ifindex of the net device
+ *     @flags: bit 0 - if set, redirect to ingress instead of egress
+ *             other bits - reserved
+ *     Return: 0 on success or negative error
+ *
+ * u64 bpf_get_current_pid_tgid(void)
+ *     Return: current->tgid << 32 | current->pid
+ *
+ * u64 bpf_get_current_uid_gid(void)
+ *     Return: current_gid << 32 | current_uid
+ *
+ * int bpf_get_current_comm(char *buf, int size_of_buf)
+ *     stores current->comm into buf
+ *     Return: 0 on success or negative error
+ *
+ * u32 bpf_get_cgroup_classid(skb)
+ *     retrieve a proc's classid
+ *     @skb: pointer to skb
+ *     Return: classid if != 0
+ *
+ * int bpf_skb_vlan_push(skb, vlan_proto, vlan_tci)
+ *     Return: 0 on success or negative error
+ *
+ * int bpf_skb_vlan_pop(skb)
+ *     Return: 0 on success or negative error
+ *
+ * int bpf_skb_get_tunnel_key(skb, key, size, flags)
+ * int bpf_skb_set_tunnel_key(skb, key, size, flags)
+ *     retrieve or populate tunnel metadata
+ *     @skb: pointer to skb
+ *     @key: pointer to 'struct bpf_tunnel_key'
+ *     @size: size of 'struct bpf_tunnel_key'
+ *     @flags: room for future extensions
+ *     Return: 0 on success or negative error
+ *
+ * u64 bpf_perf_event_read(&map, index)
+ *     Return: Number events read or error code
+ *
+ * int bpf_redirect(ifindex, flags)
+ *     redirect to another netdev
+ *     @ifindex: ifindex of the net device
+ *     @flags: bit 0 - if set, redirect to ingress instead of egress
+ *             other bits - reserved
+ *     Return: TC_ACT_REDIRECT
+ *
+ * u32 bpf_get_route_realm(skb)
+ *     retrieve a dst's tclassid
+ *     @skb: pointer to skb
+ *     Return: realm if != 0
+ *
+ * int bpf_perf_event_output(ctx, map, index, data, size)
+ *     output perf raw sample
+ *     @ctx: struct pt_regs*
+ *     @map: pointer to perf_event_array map
+ *     @index: index of event in the map
+ *     @data: data on stack to be output as raw data
+ *     @size: size of data
+ *     Return: 0 on success or negative error
+ *
+ * int bpf_get_stackid(ctx, map, flags)
+ *     walk user or kernel stack and return id
+ *     @ctx: struct pt_regs*
+ *     @map: pointer to stack_trace map
+ *     @flags: bits 0-7 - numer of stack frames to skip
+ *             bit 8 - collect user stack instead of kernel
+ *             bit 9 - compare stacks by hash only
+ *             bit 10 - if two different stacks hash into the same stackid
+ *                      discard old
+ *             other bits - reserved
+ *     Return: >= 0 stackid on success or negative error
+ *
+ * s64 bpf_csum_diff(from, from_size, to, to_size, seed)
+ *     calculate csum diff
+ *     @from: raw from buffer
+ *     @from_size: length of from buffer
+ *     @to: raw to buffer
+ *     @to_size: length of to buffer
+ *     @seed: optional seed
+ *     Return: csum result or negative error code
+ *
+ * int bpf_skb_get_tunnel_opt(skb, opt, size)
+ *     retrieve tunnel options metadata
+ *     @skb: pointer to skb
+ *     @opt: pointer to raw tunnel option data
+ *     @size: size of @opt
+ *     Return: option size
+ *
+ * int bpf_skb_set_tunnel_opt(skb, opt, size)
+ *     populate tunnel options metadata
+ *     @skb: pointer to skb
+ *     @opt: pointer to raw tunnel option data
+ *     @size: size of @opt
+ *     Return: 0 on success or negative error
+ *
+ * int bpf_skb_change_proto(skb, proto, flags)
+ *     Change protocol of the skb. Currently supported is v4 -> v6,
+ *     v6 -> v4 transitions. The helper will also resize the skb. eBPF
+ *     program is expected to fill the new headers via skb_store_bytes
+ *     and lX_csum_replace.
+ *     @skb: pointer to skb
+ *     @proto: new skb->protocol type
+ *     @flags: reserved
+ *     Return: 0 on success or negative error
+ *
+ * int bpf_skb_change_type(skb, type)
+ *     Change packet type of skb.
+ *     @skb: pointer to skb
+ *     @type: new skb->pkt_type type
+ *     Return: 0 on success or negative error
+ *
+ * int bpf_skb_under_cgroup(skb, map, index)
+ *     Check cgroup2 membership of skb
+ *     @skb: pointer to skb
+ *     @map: pointer to bpf_map in BPF_MAP_TYPE_CGROUP_ARRAY type
+ *     @index: index of the cgroup in the bpf_map
+ *     Return:
+ *       == 0 skb failed the cgroup2 descendant test
+ *       == 1 skb succeeded the cgroup2 descendant test
+ *        < 0 error
+ *
+ * u32 bpf_get_hash_recalc(skb)
+ *     Retrieve and possibly recalculate skb->hash.
+ *     @skb: pointer to skb
+ *     Return: hash
+ *
+ * u64 bpf_get_current_task(void)
+ *     Returns current task_struct
+ *     Return: current
+ *
+ * int bpf_probe_write_user(void *dst, void *src, int len)
+ *     safely attempt to write to a location
+ *     @dst: destination address in userspace
+ *     @src: source address on stack
+ *     @len: number of bytes to copy
+ *     Return: 0 on success or negative error
+ *
+ * int bpf_current_task_under_cgroup(map, index)
+ *     Check cgroup2 membership of current task
+ *     @map: pointer to bpf_map in BPF_MAP_TYPE_CGROUP_ARRAY type
+ *     @index: index of the cgroup in the bpf_map
+ *     Return:
+ *       == 0 current failed the cgroup2 descendant test
+ *       == 1 current succeeded the cgroup2 descendant test
+ *        < 0 error
+ *
+ * int bpf_skb_change_tail(skb, len, flags)
+ *     The helper will resize the skb to the given new size, to be used f.e.
+ *     with control messages.
+ *     @skb: pointer to skb
+ *     @len: new skb length
+ *     @flags: reserved
+ *     Return: 0 on success or negative error
+ *
+ * int bpf_skb_pull_data(skb, len)
+ *     The helper will pull in non-linear data in case the skb is non-linear
+ *     and not all of len are part of the linear section. Only needed for
+ *     read/write with direct packet access.
+ *     @skb: pointer to skb
+ *     @len: len to make read/writeable
+ *     Return: 0 on success or negative error
+ *
+ * s64 bpf_csum_update(skb, csum)
+ *     Adds csum into skb->csum in case of CHECKSUM_COMPLETE.
+ *     @skb: pointer to skb
+ *     @csum: csum to add
+ *     Return: csum on success or negative error
+ *
+ * void bpf_set_hash_invalid(skb)
+ *     Invalidate current skb->hash.
+ *     @skb: pointer to skb
+ *
+ * int bpf_get_numa_node_id()
+ *     Return: Id of current NUMA node.
+ *
+ * int bpf_skb_change_head()
+ *     Grows headroom of skb and adjusts MAC header offset accordingly.
+ *     Will extends/reallocae as required automatically.
+ *     May change skb data pointer and will thus invalidate any check
+ *     performed for direct packet access.
+ *     @skb: pointer to skb
+ *     @len: length of header to be pushed in front
+ *     @flags: Flags (unused for now)
+ *     Return: 0 on success or negative error
+ *
+ * int bpf_xdp_adjust_head(xdp_md, delta)
+ *     Adjust the xdp_md.data by delta
+ *     @xdp_md: pointer to xdp_md
+ *     @delta: An positive/negative integer to be added to xdp_md.data
+ *     Return: 0 on success or negative on error
+ */
+#define __BPF_FUNC_MAPPER(FN)		\
+	FN(unspec),			\
+	FN(map_lookup_elem),		\
+	FN(map_update_elem),		\
+	FN(map_delete_elem),		\
+	FN(probe_read),			\
+	FN(ktime_get_ns),		\
+	FN(trace_printk),		\
+	FN(get_prandom_u32),		\
+	FN(get_smp_processor_id),	\
+	FN(skb_store_bytes),		\
+	FN(l3_csum_replace),		\
+	FN(l4_csum_replace),		\
+	FN(tail_call),			\
+	FN(clone_redirect),		\
+	FN(get_current_pid_tgid),	\
+	FN(get_current_uid_gid),	\
+	FN(get_current_comm),		\
+	FN(get_cgroup_classid),		\
+	FN(skb_vlan_push),		\
+	FN(skb_vlan_pop),		\
+	FN(skb_get_tunnel_key),		\
+	FN(skb_set_tunnel_key),		\
+	FN(perf_event_read),		\
+	FN(redirect),			\
+	FN(get_route_realm),		\
+	FN(perf_event_output),		\
+	FN(skb_load_bytes),		\
+	FN(get_stackid),		\
+	FN(csum_diff),			\
+	FN(skb_get_tunnel_opt),		\
+	FN(skb_set_tunnel_opt),		\
+	FN(skb_change_proto),		\
+	FN(skb_change_type),		\
+	FN(skb_under_cgroup),		\
+	FN(get_hash_recalc),		\
+	FN(get_current_task),		\
+	FN(probe_write_user),		\
+	FN(current_task_under_cgroup),	\
+	FN(skb_change_tail),		\
+	FN(skb_pull_data),		\
+	FN(csum_update),		\
+	FN(set_hash_invalid),		\
+	FN(get_numa_node_id),		\
+	FN(skb_change_head),		\
+	FN(xdp_adjust_head),
+
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
  * function eBPF program intends to call
  */
+#define __BPF_ENUM_FN(x) BPF_FUNC_ ## x
 enum bpf_func_id {
-	BPF_FUNC_unspec,
-	BPF_FUNC_map_lookup_elem, /* void *map_lookup_elem(&map, &key) */
-	BPF_FUNC_map_update_elem, /* int map_update_elem(&map, &key, &value, flags) */
-	BPF_FUNC_map_delete_elem, /* int map_delete_elem(&map, &key) */
-	BPF_FUNC_probe_read,      /* int bpf_probe_read(void *dst, int size, void *src) */
-	BPF_FUNC_ktime_get_ns,    /* u64 bpf_ktime_get_ns(void) */
-	BPF_FUNC_trace_printk,    /* int bpf_trace_printk(const char *fmt, int fmt_size, ...) */
-	BPF_FUNC_get_prandom_u32, /* u32 prandom_u32(void) */
-	BPF_FUNC_get_smp_processor_id, /* u32 raw_smp_processor_id(void) */
-
-	/**
-	 * skb_store_bytes(skb, offset, from, len, flags) - store bytes into packet
-	 * @skb: pointer to skb
-	 * @offset: offset within packet from skb->mac_header
-	 * @from: pointer where to copy bytes from
-	 * @len: number of bytes to store into packet
-	 * @flags: bit 0 - if true, recompute skb->csum
-	 *         other bits - reserved
-	 * Return: 0 on success
-	 */
-	BPF_FUNC_skb_store_bytes,
-
-	/**
-	 * l3_csum_replace(skb, offset, from, to, flags) - recompute IP checksum
-	 * @skb: pointer to skb
-	 * @offset: offset within packet where IP checksum is located
-	 * @from: old value of header field
-	 * @to: new value of header field
-	 * @flags: bits 0-3 - size of header field
-	 *         other bits - reserved
-	 * Return: 0 on success
-	 */
-	BPF_FUNC_l3_csum_replace,
-
-	/**
-	 * l4_csum_replace(skb, offset, from, to, flags) - recompute TCP/UDP checksum
-	 * @skb: pointer to skb
-	 * @offset: offset within packet where TCP/UDP checksum is located
-	 * @from: old value of header field
-	 * @to: new value of header field
-	 * @flags: bits 0-3 - size of header field
-	 *         bit 4 - is pseudo header
-	 *         other bits - reserved
-	 * Return: 0 on success
-	 */
-	BPF_FUNC_l4_csum_replace,
-
-	/**
-	 * bpf_tail_call(ctx, prog_array_map, index) - jump into another BPF program
-	 * @ctx: context pointer passed to next program
-	 * @prog_array_map: pointer to map which type is BPF_MAP_TYPE_PROG_ARRAY
-	 * @index: index inside array that selects specific program to run
-	 * Return: 0 on success
-	 */
-	BPF_FUNC_tail_call,
-
-	/**
-	 * bpf_clone_redirect(skb, ifindex, flags) - redirect to another netdev
-	 * @skb: pointer to skb
-	 * @ifindex: ifindex of the net device
-	 * @flags: bit 0 - if set, redirect to ingress instead of egress
-	 *         other bits - reserved
-	 * Return: 0 on success
-	 */
-	BPF_FUNC_clone_redirect,
-
-	/**
-	 * u64 bpf_get_current_pid_tgid(void)
-	 * Return: current->tgid << 32 | current->pid
-	 */
-	BPF_FUNC_get_current_pid_tgid,
-
-	/**
-	 * u64 bpf_get_current_uid_gid(void)
-	 * Return: current_gid << 32 | current_uid
-	 */
-	BPF_FUNC_get_current_uid_gid,
-
-	/**
-	 * bpf_get_current_comm(char *buf, int size_of_buf)
-	 * stores current->comm into buf
-	 * Return: 0 on success
-	 */
-	BPF_FUNC_get_current_comm,
-
-	/**
-	 * bpf_get_cgroup_classid(skb) - retrieve a proc's classid
-	 * @skb: pointer to skb
-	 * Return: classid if != 0
-	 */
-	BPF_FUNC_get_cgroup_classid,
-	BPF_FUNC_skb_vlan_push, /* bpf_skb_vlan_push(skb, vlan_proto, vlan_tci) */
-	BPF_FUNC_skb_vlan_pop,  /* bpf_skb_vlan_pop(skb) */
-
-	/**
-	 * bpf_skb_[gs]et_tunnel_key(skb, key, size, flags)
-	 * retrieve or populate tunnel metadata
-	 * @skb: pointer to skb
-	 * @key: pointer to 'struct bpf_tunnel_key'
-	 * @size: size of 'struct bpf_tunnel_key'
-	 * @flags: room for future extensions
-	 * Retrun: 0 on success
-	 */
-	BPF_FUNC_skb_get_tunnel_key,
-	BPF_FUNC_skb_set_tunnel_key,
-	BPF_FUNC_perf_event_read,	/* u64 bpf_perf_event_read(&map, index) */
-	/**
-	 * bpf_redirect(ifindex, flags) - redirect to another netdev
-	 * @ifindex: ifindex of the net device
-	 * @flags: bit 0 - if set, redirect to ingress instead of egress
-	 *         other bits - reserved
-	 * Return: TC_ACT_REDIRECT
-	 */
-	BPF_FUNC_redirect,
-
-	/**
-	 * bpf_get_route_realm(skb) - retrieve a dst's tclassid
-	 * @skb: pointer to skb
-	 * Return: realm if != 0
-	 */
-	BPF_FUNC_get_route_realm,
-
-	/**
-	 * bpf_perf_event_output(ctx, map, index, data, size) - output perf raw sample
-	 * @ctx: struct pt_regs*
-	 * @map: pointer to perf_event_array map
-	 * @index: index of event in the map
-	 * @data: data on stack to be output as raw data
-	 * @size: size of data
-	 * Return: 0 on success
-	 */
-	BPF_FUNC_perf_event_output,
-	BPF_FUNC_skb_load_bytes,
-
-	/**
-	 * bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id
-	 * @ctx: struct pt_regs*
-	 * @map: pointer to stack_trace map
-	 * @flags: bits 0-7 - numer of stack frames to skip
-	 *         bit 8 - collect user stack instead of kernel
-	 *         bit 9 - compare stacks by hash only
-	 *         bit 10 - if two different stacks hash into the same stackid
-	 *                  discard old
-	 *         other bits - reserved
-	 * Return: >= 0 stackid on success or negative error
-	 */
-	BPF_FUNC_get_stackid,
-
-	/**
-	 * bpf_csum_diff(from, from_size, to, to_size, seed) - calculate csum diff
-	 * @from: raw from buffer
-	 * @from_size: length of from buffer
-	 * @to: raw to buffer
-	 * @to_size: length of to buffer
-	 * @seed: optional seed
-	 * Return: csum result
-	 */
-	BPF_FUNC_csum_diff,
-
-	/**
-	 * bpf_skb_[gs]et_tunnel_opt(skb, opt, size)
-	 * retrieve or populate tunnel options metadata
-	 * @skb: pointer to skb
-	 * @opt: pointer to raw tunnel option data
-	 * @size: size of @opt
-	 * Return: 0 on success for set, option size for get
-	 */
-	BPF_FUNC_skb_get_tunnel_opt,
-	BPF_FUNC_skb_set_tunnel_opt,
-
-	/**
-	 * bpf_skb_change_proto(skb, proto, flags)
-	 * Change protocol of the skb. Currently supported is
-	 * v4 -> v6, v6 -> v4 transitions. The helper will also
-	 * resize the skb. eBPF program is expected to fill the
-	 * new headers via skb_store_bytes and lX_csum_replace.
-	 * @skb: pointer to skb
-	 * @proto: new skb->protocol type
-	 * @flags: reserved
-	 * Return: 0 on success or negative error
-	 */
-	BPF_FUNC_skb_change_proto,
-
-	/**
-	 * bpf_skb_change_type(skb, type)
-	 * Change packet type of skb.
-	 * @skb: pointer to skb
-	 * @type: new skb->pkt_type type
-	 * Return: 0 on success or negative error
-	 */
-	BPF_FUNC_skb_change_type,
-
-	/**
-	 * bpf_skb_under_cgroup(skb, map, index) - Check cgroup2 membership of skb
-	 * @skb: pointer to skb
-	 * @map: pointer to bpf_map in BPF_MAP_TYPE_CGROUP_ARRAY type
-	 * @index: index of the cgroup in the bpf_map
-	 * Return:
-	 *   == 0 skb failed the cgroup2 descendant test
-	 *   == 1 skb succeeded the cgroup2 descendant test
-	 *    < 0 error
-	 */
-	BPF_FUNC_skb_under_cgroup,
-
-	/**
-	 * bpf_get_hash_recalc(skb)
-	 * Retrieve and possibly recalculate skb->hash.
-	 * @skb: pointer to skb
-	 * Return: hash
-	 */
-	BPF_FUNC_get_hash_recalc,
-
-	/**
-	 * u64 bpf_get_current_task(void)
-	 * Returns current task_struct
-	 * Return: current
-	 */
-	BPF_FUNC_get_current_task,
-
-	/**
-	 * bpf_probe_write_user(void *dst, void *src, int len)
-	 * safely attempt to write to a location
-	 * @dst: destination address in userspace
-	 * @src: source address on stack
-	 * @len: number of bytes to copy
-	 * Return: 0 on success or negative error
-	 */
-	BPF_FUNC_probe_write_user,
-
-	/**
-	 * bpf_current_task_under_cgroup(map, index) - Check cgroup2 membership of current task
-	 * @map: pointer to bpf_map in BPF_MAP_TYPE_CGROUP_ARRAY type
-	 * @index: index of the cgroup in the bpf_map
-	 * Return:
-	 *   == 0 current failed the cgroup2 descendant test
-	 *   == 1 current succeeded the cgroup2 descendant test
-	 *    < 0 error
-	 */
-	BPF_FUNC_current_task_under_cgroup,
-
-	/**
-	 * bpf_skb_change_tail(skb, len, flags)
-	 * The helper will resize the skb to the given new size,
-	 * to be used f.e. with control messages.
-	 * @skb: pointer to skb
-	 * @len: new skb length
-	 * @flags: reserved
-	 * Return: 0 on success or negative error
-	 */
-	BPF_FUNC_skb_change_tail,
-
-	/**
-	 * bpf_skb_pull_data(skb, len)
-	 * The helper will pull in non-linear data in case the
-	 * skb is non-linear and not all of len are part of the
-	 * linear section. Only needed for read/write with direct
-	 * packet access.
-	 * @skb: pointer to skb
-	 * @len: len to make read/writeable
-	 * Return: 0 on success or negative error
-	 */
-	BPF_FUNC_skb_pull_data,
-
-	/**
-	 * bpf_csum_update(skb, csum)
-	 * Adds csum into skb->csum in case of CHECKSUM_COMPLETE.
-	 * @skb: pointer to skb
-	 * @csum: csum to add
-	 * Return: csum on success or negative error
-	 */
-	BPF_FUNC_csum_update,
-
-	/**
-	 * bpf_set_hash_invalid(skb)
-	 * Invalidate current skb>hash.
-	 * @skb: pointer to skb
-	 */
-	BPF_FUNC_set_hash_invalid,
-
+	__BPF_FUNC_MAPPER(__BPF_ENUM_FN)
 	__BPF_FUNC_MAX_ID,
 };
+#undef __BPF_ENUM_FN
 
 /* All flags used by eBPF helper functions, placed here. */
 
@@ -501,6 +560,31 @@ struct bpf_tunnel_key {
 	__u32 tunnel_label;
 };
 
+/* Generic BPF return codes which all BPF program types may support.
+ * The values are binary compatible with their TC_ACT_* counter-part to
+ * provide backwards compatibility with existing SCHED_CLS and SCHED_ACT
+ * programs.
+ *
+ * XDP is handled seprately, see XDP_*.
+ */
+enum bpf_ret_code {
+	BPF_OK = 0,
+	/* 1 reserved */
+	BPF_DROP = 2,
+	/* 3-6 reserved */
+	BPF_REDIRECT = 7,
+	/* >127 are reserved for prog type specific return codes */
+};
+
+struct bpf_sock {
+	__u32 bound_dev_if;
+	__u32 family;
+	__u32 type;
+	__u32 protocol;
+};
+
+#define XDP_PACKET_HEADROOM 256
+
 /* User return codes for XDP prog type.
  * A valid XDP program must return one of these defined values. All other
  * return codes are reserved for future use. Unknown return codes will result