Merge tag 'wireless-next-2023-10-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.7

The first pull request for v6.7, with both stack and driver changes.
We have a big change how locking is handled in cfg80211 and mac80211
which removes several locks and hopefully simplifies the locking
overall. In drivers rtw89 got MCC support and smaller features to
other active drivers but nothing out of ordinary.

Major changes:

cfg80211
 - remove wdev mutex, use the wiphy mutex instead
 - annotate iftype_data pointer with sparse
 - first kunit tests, for element defrag
 - remove unused scan_width support

mac80211
 - major locking rework, remove several locks like sta_mtx, key_mtx
   etc. and use the wiphy mutex instead
 - remove unused shifted rate support
 - support antenna control in frame injection (requires driver support)
 - convert RX_DROP_UNUSABLE to more detailed reason codes

rtw89
 - TDMA-based multi-channel concurrency (MCC) support

iwlwifi
 - support set_antenna() operation
 - support frame injection antenna control

ath12k
 - WCN7850: enable 320 MHz channels in 6 GHz band
 - WCN7850: hardware rfkill support
 - WCN7850: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster

ath11k
 - add chip id board name while searching board-2.bin

* tag 'wireless-next-2023-10-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (272 commits)
  wifi: rtlwifi: remove unreachable code in rtl92d_dm_check_edca_turbo()
  wifi: rtw89: debug: txpwr table supports Wi-Fi 7 chips
  wifi: rtw89: debug: show txpwr table according to chip gen
  wifi: rtw89: phy: set TX power RU limit according to chip gen
  wifi: rtw89: phy: set TX power limit according to chip gen
  wifi: rtw89: phy: set TX power offset according to chip gen
  wifi: rtw89: phy: set TX power by rate according to chip gen
  wifi: rtw89: mac: get TX power control register according to chip gen
  wifi: rtlwifi: use unsigned long for rtl_bssid_entry timestamp
  wifi: rtlwifi: fix EDCA limit set by BT coexistence
  wifi: rt2x00: fix MT7620 low RSSI issue
  wifi: rtw89: refine bandwidth 160MHz uplink OFDMA performance
  wifi: rtw89: refine uplink trigger based control mechanism
  wifi: rtw89: 8851b: update TX power tables to R34
  wifi: rtw89: 8852b: update TX power tables to R35
  wifi: rtw89: 8852c: update TX power tables to R67
  wifi: rtw89: regd: configure Thailand in regulation type
  wifi: mac80211: add back SPDX identifier
  wifi: mac80211: fix ieee80211_drop_unencrypted_mgmt return type/value
  wifi: rtlwifi: cleanup few rtlxxxx_set_hw_reg() routines
  ...

====================

Link: https://lore.kernel.org/r/87jzrz6bvw.fsf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 34 insertions, 5 deletions

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 88eb85c63029..0c64994b118e 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -335,6 +335,15 @@
  */
 
 /**
+ * DOC: OWE DH IE handling offload
+ *
+ * By setting @NL80211_EXT_FEATURE_OWE_OFFLOAD flag, drivers can indicate
+ * kernel/application space to avoid DH IE handling. When this flag is
+ * advertised, the driver/device will take care of DH IE inclusion and
+ * processing of peer DH IE to generate PMK.
+ */
+
+/**
  * enum nl80211_commands - supported nl80211 commands
  *
  * @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -2690,11 +2699,13 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS
  *	discovery. It is a nested attribute, see
- *	&enum nl80211_fils_discovery_attributes.
+ *	&enum nl80211_fils_discovery_attributes. Userspace should pass an empty
+ *	nested attribute to disable this feature and delete the templates.
  *
  * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure
  *	unsolicited broadcast probe response. It is a nested attribute, see
- *	&enum nl80211_unsol_bcast_probe_resp_attributes.
+ *	&enum nl80211_unsol_bcast_probe_resp_attributes. Userspace should pass an empty
+ *	nested attribute to disable this feature and delete the templates.
  *
  * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from
  *	association request when used with NL80211_CMD_NEW_STATION)
@@ -4213,6 +4224,8 @@ enum nl80211_wmm_rule {
  *	as the primary or any of the secondary channels isn't possible
  * @NL80211_FREQUENCY_ATTR_NO_EHT: EHT operation is not allowed on this channel
  *	in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_PSD: Power spectral density (in dBm) that
+ *	is allowed on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -4251,6 +4264,7 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_16MHZ,
 	NL80211_FREQUENCY_ATTR_NO_320MHZ,
 	NL80211_FREQUENCY_ATTR_NO_EHT,
+	NL80211_FREQUENCY_ATTR_PSD,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4351,6 +4365,8 @@ enum nl80211_reg_type {
  * 	a given frequency range. The value is in mBm (100 * dBm).
  * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
  *	If not present or 0 default CAC time will be used.
+ * @NL80211_ATTR_POWER_RULE_PSD: power spectral density (in dBm).
+ *	This could be negative.
  * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
  *	currently defined
  * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
@@ -4368,6 +4384,8 @@ enum nl80211_reg_rule_attr {
 
 	NL80211_ATTR_DFS_CAC_TIME,
 
+	NL80211_ATTR_POWER_RULE_PSD,
+
 	/* keep last */
 	__NL80211_REG_RULE_ATTR_AFTER_LAST,
 	NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
@@ -4451,6 +4469,7 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_HE: HE operation not allowed
  * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed
  * @NL80211_RRF_NO_EHT: EHT operation not allowed
+ * @NL80211_RRF_PSD: Ruleset has power spectral density value
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -4471,6 +4490,7 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_HE		= 1<<17,
 	NL80211_RRF_NO_320MHZ		= 1<<18,
 	NL80211_RRF_NO_EHT		= 1<<19,
+	NL80211_RRF_PSD			= 1<<20,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
@@ -5038,7 +5058,7 @@ enum nl80211_bss_scan_width {
  *	elements from a Beacon frame (bin); not present if no Beacon frame has
  *	yet been received
  * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel
- *	(u32, enum nl80211_bss_scan_width)
+ *	(u32, enum nl80211_bss_scan_width) - No longer used!
  * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64)
  *	(not present if no beacon frame has been received yet)
  * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and
@@ -6400,6 +6420,12 @@ enum nl80211_feature_flags {
  *	in authentication and deauthentication frames sent to unassociated peer
  *	using @NL80211_CMD_FRAME.
  *
+ * @NL80211_EXT_FEATURE_OWE_OFFLOAD: Driver/Device wants to do OWE DH IE
+ *	handling in station mode.
+ *
+ * @NL80211_EXT_FEATURE_OWE_OFFLOAD_AP: Driver/Device wants to do OWE DH IE
+ *	handling in AP mode.
+ *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -6471,6 +6497,8 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_PUNCT,
 	NL80211_EXT_FEATURE_SECURE_NAN,
 	NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA,
+	NL80211_EXT_FEATURE_OWE_OFFLOAD,
+	NL80211_EXT_FEATURE_OWE_OFFLOAD_AP,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -7606,7 +7634,7 @@ enum nl80211_iftype_akm_attributes {
  * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU).
  *	Allowed range: 0..10000 (TU = Time Unit)
  * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU).
- *	Allowed range: 0..10000 (TU = Time Unit)
+ *	Allowed range: 0..10000 (TU = Time Unit). If set to 0, the feature is disabled.
  * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action
  *	frame including the headers.
  *
@@ -7639,7 +7667,8 @@ enum nl80211_fils_discovery_attributes {
  *
  * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU).
  *	Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0
- *	26.17.2.3.2 (AP behavior for fast passive scanning).
+ *	26.17.2.3.2 (AP behavior for fast passive scanning). If set to 0, the feature is
+ *	disabled.
  * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response
  *	frame template (binary).
  *