wifi: cfg80211: add initial UHR support

Add initial support for making UHR connections (or suppressing
that), adding UHR capable stations on the AP side, encoding
and decoding UHR MCSes (except rate calculation for the new
MCSes 17, 19, 20 and 23) as well as regulatory support.

Link: https://patch.msgid.link/20260130164259.54cc12fbb307.I26126bebd83c7ab17e99827489f946ceabb3521f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

2 files changed, 85 insertions, 3 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 7911ed58abbb..fc01de19c798 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -7,7 +7,7 @@
  * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net>
  * Copyright 2013-2014 Intel Mobile Communications GmbH
  * Copyright 2015-2017	Intel Deutschland GmbH
- * Copyright (C) 2018-2025 Intel Corporation
+ * Copyright (C) 2018-2026 Intel Corporation
  */
 
 #include <linux/ethtool.h>
@@ -126,6 +126,7 @@ struct wiphy;
  * @IEEE80211_CHAN_NO_4MHZ: 4 MHz bandwidth is not permitted on this channel.
  * @IEEE80211_CHAN_NO_8MHZ: 8 MHz bandwidth is not permitted on this channel.
  * @IEEE80211_CHAN_NO_16MHZ: 16 MHz bandwidth is not permitted on this channel.
+ * @IEEE80211_CHAN_NO_UHR: UHR operation is not permitted on this channel.
  */
 enum ieee80211_channel_flags {
 	IEEE80211_CHAN_DISABLED			= BIT(0),
@@ -143,6 +144,7 @@ enum ieee80211_channel_flags {
 	IEEE80211_CHAN_NO_10MHZ			= BIT(12),
 	IEEE80211_CHAN_NO_HE			= BIT(13),
 	/* can use free bits here */
+	IEEE80211_CHAN_NO_UHR			= BIT(18),
 	IEEE80211_CHAN_NO_320MHZ		= BIT(19),
 	IEEE80211_CHAN_NO_EHT			= BIT(20),
 	IEEE80211_CHAN_DFS_CONCURRENT		= BIT(21),
@@ -429,6 +431,18 @@ struct ieee80211_sta_eht_cap {
 	u8 eht_ppe_thres[IEEE80211_EHT_PPE_THRES_MAX_LEN];
 };
 
+/**
+ * struct ieee80211_sta_uhr_cap - STA's UHR capabilities
+ * @has_uhr: true iff UHR is supported and data is valid
+ * @mac: fixed MAC capabilities
+ * @phy: fixed PHY capabilities
+ */
+struct ieee80211_sta_uhr_cap {
+	bool has_uhr;
+	struct ieee80211_uhr_cap_mac mac;
+	struct ieee80211_uhr_cap_phy phy;
+};
+
 /* sparse defines __CHECKER__; see Documentation/dev-tools/sparse.rst */
 #ifdef __CHECKER__
 /*
@@ -454,6 +468,7 @@ struct ieee80211_sta_eht_cap {
  * @he_6ghz_capa: HE 6 GHz capabilities, must be filled in for a
  *	6 GHz band channel (and 0 may be valid value).
  * @eht_cap: STA's EHT capabilities
+ * @uhr_cap: STA's UHR capabilities
  * @vendor_elems: vendor element(s) to advertise
  * @vendor_elems.data: vendor element(s) data
  * @vendor_elems.len: vendor element(s) length
@@ -463,6 +478,7 @@ struct ieee80211_sband_iftype_data {
 	struct ieee80211_sta_he_cap he_cap;
 	struct ieee80211_he_6ghz_capa he_6ghz_capa;
 	struct ieee80211_sta_eht_cap eht_cap;
+	struct ieee80211_sta_uhr_cap uhr_cap;
 	struct {
 		const u8 *data;
 		unsigned int len;
@@ -705,6 +721,26 @@ ieee80211_get_eht_iftype_cap(const struct ieee80211_supported_band *sband,
 }
 
 /**
+ * ieee80211_get_uhr_iftype_cap - return UHR capabilities for an sband's iftype
+ * @sband: the sband to search for the iftype on
+ * @iftype: enum nl80211_iftype
+ *
+ * Return: pointer to the struct ieee80211_sta_uhr_cap, or NULL is none found
+ */
+static inline const struct ieee80211_sta_uhr_cap *
+ieee80211_get_uhr_iftype_cap(const struct ieee80211_supported_band *sband,
+			     enum nl80211_iftype iftype)
+{
+	const struct ieee80211_sband_iftype_data *data =
+		ieee80211_get_sband_iftype_data(sband, iftype);
+
+	if (data && data->uhr_cap.has_uhr)
+		return &data->uhr_cap;
+
+	return NULL;
+}
+
+/**
  * wiphy_read_of_freq_limits - read frequency limits from device tree
  *
  * @wiphy: the wireless device to get extra limits for
@@ -1486,6 +1522,7 @@ struct cfg80211_s1g_short_beacon {
  * @he_cap: HE capabilities (or %NULL if HE isn't enabled)
  * @eht_cap: EHT capabilities (or %NULL if EHT isn't enabled)
  * @eht_oper: EHT operation IE (or %NULL if EHT isn't enabled)
+ * @uhr_oper: UHR operation (or %NULL if UHR isn't enabled)
  * @ht_required: stations must support HT
  * @vht_required: stations must support VHT
  * @twt_responder: Enable Target Wait Time
@@ -1525,6 +1562,7 @@ struct cfg80211_ap_settings {
 	const struct ieee80211_he_operation *he_oper;
 	const struct ieee80211_eht_cap_elem *eht_cap;
 	const struct ieee80211_eht_operation *eht_oper;
+	const struct ieee80211_uhr_operation *uhr_oper;
 	bool ht_required, vht_required, he_required, sae_h2e_required;
 	bool twt_responder;
 	u32 flags;
@@ -1698,6 +1736,8 @@ struct sta_txpwr {
  * @eht_capa: EHT capabilities of station
  * @eht_capa_len: the length of the EHT capabilities
  * @s1g_capa: S1G capabilities of station
+ * @uhr_capa: UHR capabilities of the station
+ * @uhr_capa_len: the length of the UHR capabilities
  */
 struct link_station_parameters {
 	const u8 *mld_mac;
@@ -1717,6 +1757,8 @@ struct link_station_parameters {
 	const struct ieee80211_eht_cap_elem *eht_capa;
 	u8 eht_capa_len;
 	const struct ieee80211_s1g_cap *s1g_capa;
+	const struct ieee80211_uhr_cap *uhr_capa;
+	u8 uhr_capa_len;
 };
 
 /**
@@ -1898,6 +1940,11 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
  * @RATE_INFO_FLAGS_EXTENDED_SC_DMG: 60GHz extended SC MCS
  * @RATE_INFO_FLAGS_EHT_MCS: EHT MCS information
  * @RATE_INFO_FLAGS_S1G_MCS: MCS field filled with S1G MCS
+ * @RATE_INFO_FLAGS_UHR_MCS: UHR MCS information
+ * @RATE_INFO_FLAGS_UHR_ELR_MCS: UHR ELR MCS was used
+ *	(set together with @RATE_INFO_FLAGS_UHR_MCS)
+ * @RATE_INFO_FLAGS_UHR_IM: UHR Interference Mitigation
+ *	was used
  */
 enum rate_info_flags {
 	RATE_INFO_FLAGS_MCS			= BIT(0),
@@ -1909,6 +1956,9 @@ enum rate_info_flags {
 	RATE_INFO_FLAGS_EXTENDED_SC_DMG		= BIT(6),
 	RATE_INFO_FLAGS_EHT_MCS			= BIT(7),
 	RATE_INFO_FLAGS_S1G_MCS			= BIT(8),
+	RATE_INFO_FLAGS_UHR_MCS			= BIT(9),
+	RATE_INFO_FLAGS_UHR_ELR_MCS		= BIT(10),
+	RATE_INFO_FLAGS_UHR_IM			= BIT(11),
 };
 
 /**
@@ -1924,7 +1974,7 @@ enum rate_info_flags {
  * @RATE_INFO_BW_160: 160 MHz bandwidth
  * @RATE_INFO_BW_HE_RU: bandwidth determined by HE RU allocation
  * @RATE_INFO_BW_320: 320 MHz bandwidth
- * @RATE_INFO_BW_EHT_RU: bandwidth determined by EHT RU allocation
+ * @RATE_INFO_BW_EHT_RU: bandwidth determined by EHT/UHR RU allocation
  * @RATE_INFO_BW_1: 1 MHz bandwidth
  * @RATE_INFO_BW_2: 2 MHz bandwidth
  * @RATE_INFO_BW_4: 4 MHz bandwidth
@@ -1955,7 +2005,7 @@ enum rate_info_bw {
  *
  * @flags: bitflag of flags from &enum rate_info_flags
  * @legacy: bitrate in 100kbit/s for 802.11abg
- * @mcs: mcs index if struct describes an HT/VHT/HE/EHT/S1G rate
+ * @mcs: mcs index if struct describes an HT/VHT/HE/EHT/S1G/UHR rate
  * @nss: number of streams (VHT & HE only)
  * @bw: bandwidth (from &enum rate_info_bw)
  * @he_gi: HE guard interval (from &enum nl80211_he_gi)
@@ -3262,6 +3312,7 @@ struct cfg80211_ml_reconf_req {
  *	Drivers shall disable MLO features for the current association if this
  *	flag is not set.
  * @ASSOC_REQ_SPP_AMSDU: SPP A-MSDUs will be used on this connection (if any)
+ * @ASSOC_REQ_DISABLE_UHR: Disable UHR
  */
 enum cfg80211_assoc_req_flags {
 	ASSOC_REQ_DISABLE_HT			= BIT(0),
@@ -3272,6 +3323,7 @@ enum cfg80211_assoc_req_flags {
 	ASSOC_REQ_DISABLE_EHT			= BIT(5),
 	CONNECT_REQ_MLO_SUPPORT			= BIT(6),
 	ASSOC_REQ_SPP_AMSDU			= BIT(7),
+	ASSOC_REQ_DISABLE_UHR			= BIT(8),
 };
 
 /**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 706a98686068..b63f71850906 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2977,6 +2977,13 @@ enum nl80211_commands {
  * @NL80211_ATTR_EPP_PEER: A flag attribute to indicate if the peer is an EPP
  *	STA. Used with %NL80211_CMD_NEW_STA and %NL80211_CMD_ADD_LINK_STA
  *
+ * @NL80211_ATTR_UHR_CAPABILITY: UHR Capability information element (from
+ *	association request when used with NL80211_CMD_NEW_STATION). Can be set
+ *	only if HE/EHT are also available.
+ * @NL80211_ATTR_DISABLE_UHR: Force UHR capable interfaces to disable
+ *	this feature during association. This is a flag attribute.
+ *	Currently only supported in mac80211 drivers.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3547,6 +3554,9 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_EPP_PEER,
 
+	NL80211_ATTR_UHR_CAPABILITY,
+	NL80211_ATTR_DISABLE_UHR,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3899,6 +3909,12 @@ enum nl80211_eht_ru_alloc {
  * @NL80211_RATE_INFO_4_MHZ_WIDTH: 4 MHz S1G rate
  * @NL80211_RATE_INFO_8_MHZ_WIDTH: 8 MHz S1G rate
  * @NL80211_RATE_INFO_16_MHZ_WIDTH: 16 MHz S1G rate
+ * @NL80211_RATE_INFO_UHR_MCS: UHR MCS index (u8, 0-15, 17, 19, 20, 23)
+ *	Note that the other EHT attributes (such as @NL80211_RATE_INFO_EHT_NSS)
+ *	are used in conjunction with this where applicable
+ * @NL80211_RATE_INFO_UHR_ELR: UHR ELR flag, which restricts NSS to 1,
+ *	MCS to 0 or 1, and GI to %NL80211_RATE_INFO_EHT_GI_1_6.
+ * @NL80211_RATE_INFO_UHR_IM: UHR Interference Mitigation flag
  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
  */
 enum nl80211_rate_info {
@@ -3932,6 +3948,9 @@ enum nl80211_rate_info {
 	NL80211_RATE_INFO_4_MHZ_WIDTH,
 	NL80211_RATE_INFO_8_MHZ_WIDTH,
 	NL80211_RATE_INFO_16_MHZ_WIDTH,
+	NL80211_RATE_INFO_UHR_MCS,
+	NL80211_RATE_INFO_UHR_ELR,
+	NL80211_RATE_INFO_UHR_IM,
 
 	/* keep last */
 	__NL80211_RATE_INFO_AFTER_LAST,
@@ -4254,6 +4273,10 @@ enum nl80211_mpath_info {
  *	capabilities element
  * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE: EHT PPE thresholds information as
  *	defined in EHT capabilities element
+ * @NL80211_BAND_IFTYPE_ATTR_UHR_CAP_MAC: UHR MAC capabilities as in UHR
+ *	capabilities element
+ * @NL80211_BAND_IFTYPE_ATTR_UHR_CAP_PHY: UHR PHY capabilities as in UHR
+ *	capabilities element
  * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
  * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined
  */
@@ -4271,6 +4294,8 @@ enum nl80211_band_iftype_attr {
 	NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY,
 	NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET,
 	NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE,
+	NL80211_BAND_IFTYPE_ATTR_UHR_CAP_MAC,
+	NL80211_BAND_IFTYPE_ATTR_UHR_CAP_PHY,
 
 	/* keep last */
 	__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
@@ -4453,6 +4478,8 @@ enum nl80211_wmm_rule {
  * @NL80211_FREQUENCY_ATTR_S1G_NO_PRIMARY: Channel is not permitted for use
  *	as a primary channel. Does not prevent the channel from existing
  *	as a non-primary subchannel. Only applicable to S1G channels.
+ * @NL80211_FREQUENCY_ATTR_NO_UHR: UHR operation is not allowed on this channel
+ *	in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -4502,6 +4529,7 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_8MHZ,
 	NL80211_FREQUENCY_ATTR_NO_16MHZ,
 	NL80211_FREQUENCY_ATTR_S1G_NO_PRIMARY,
+	NL80211_FREQUENCY_ATTR_NO_UHR,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4715,6 +4743,7 @@ enum nl80211_sched_scan_match_attr {
  *	despite NO_IR configuration.
  * @NL80211_RRF_ALLOW_20MHZ_ACTIVITY: Allow activity in 20 MHz bandwidth,
  *	despite NO_IR configuration.
+ * @NL80211_RRF_NO_UHR: UHR operation not allowed
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM                 = 1 << 0,
@@ -4741,6 +4770,7 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_6GHZ_AFC_CLIENT      = 1 << 23,
 	NL80211_RRF_ALLOW_6GHZ_VLP_AP       = 1 << 24,
 	NL80211_RRF_ALLOW_20MHZ_ACTIVITY    = 1 << 25,
+	NL80211_RRF_NO_UHR		    = 1 << 26,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR