Merge git://linuxtv.org/sailus/media_tree into media_stage

* git://linuxtv.org/sailus/media_tree: (47 commits)
  media: i2c: ov4689: code cleanup
  media: ov9650: Drop platform data code path
  media: ov7670: Drop unused include
  media: ov2640: Drop legacy includes
  media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver
  media: dt-bindings: add bindings for Toshiba TC358746
  phy: dphy: add support to calculate the timing based on hs_clk_rate
  phy: dphy: refactor get_default_config
  v4l: subdev: Warn if disabling streaming failed, return success
  dw9768: Enable low-power probe on ACPI
  media: i2c: imx290: Replace GAIN control with ANALOGUE_GAIN
  media: i2c: imx290: Add crop selection targets support
  media: i2c: imx290: Factor out format retrieval to separate function
  media: i2c: imx290: Move registers with fixed value to init array
  media: i2c: imx290: Create controls for fwnode properties
  media: i2c: imx290: Implement HBLANK and VBLANK controls
  media: i2c: imx290: Split control initialization to separate function
  media: i2c: imx290: Fix max gain value
  media: i2c: imx290: Add exposure time control
  media: i2c: imx290: Define more register macros
  ...

6 files changed, 17 insertions, 30 deletions

diff --git a/include/linux/phy/phy-mipi-dphy.h b/include/linux/phy/phy-mipi-dphy.h
index a877ffee845d..1ac128d78dfe 100644
--- a/include/linux/phy/phy-mipi-dphy.h
+++ b/include/linux/phy/phy-mipi-dphy.h
@@ -279,6 +279,9 @@ int phy_mipi_dphy_get_default_config(unsigned long pixel_clock,
 				     unsigned int bpp,
 				     unsigned int lanes,
 				     struct phy_configure_opts_mipi_dphy *cfg);
+int phy_mipi_dphy_get_default_config_for_hsclk(unsigned long long hs_clk_rate,
+					       unsigned int lanes,
+					       struct phy_configure_opts_mipi_dphy *cfg);
 int phy_mipi_dphy_config_validate(struct phy_configure_opts_mipi_dphy *cfg);
 
 #endif /* __PHY_MIPI_DPHY_H_ */
diff --git a/include/media/i2c/ov9650.h b/include/media/i2c/ov9650.h
deleted file mode 100644
index 3ec7e06955b4..000000000000
--- a/include/media/i2c/ov9650.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * OV9650/OV9652 camera sensors driver
- *
- * Copyright (C) 2013 Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
- */
-#ifndef OV9650_H_
-#define OV9650_H_
-
-/**
- * struct ov9650_platform_data - ov9650 driver platform data
- * @mclk_frequency: the sensor's master clock frequency in Hz
- * @gpio_pwdn:	    number of a GPIO connected to OV965X PWDN pin
- * @gpio_reset:     number of a GPIO connected to OV965X RESET pin
- *
- * If any of @gpio_pwdn or @gpio_reset are unused then they should be
- * set to a negative value. @mclk_frequency must always be specified.
- */
-struct ov9650_platform_data {
-	unsigned long mclk_frequency;
-	int gpio_pwdn;
-	int gpio_reset;
-};
-#endif /* OV9650_H_ */
diff --git a/include/media/media-entity.h b/include/media/media-entity.h
index 28c9de8a1f34..85ed08ddee9d 100644
--- a/include/media/media-entity.h
+++ b/include/media/media-entity.h
@@ -237,7 +237,7 @@ struct media_pad {
  * @link_validate:	Return whether a link is valid from the entity point of
  *			view. The media_pipeline_start() function
  *			validates all links by calling this operation. Optional.
- * @has_pad_interdep:	Return whether a two pads inside the entity are
+ * @has_pad_interdep:	Return whether two pads of the entity are
  *			interdependent. If two pads are interdependent they are
  *			part of the same pipeline and enabling one of the pads
  *			means that the other pad will become "locked" and
@@ -1144,7 +1144,7 @@ __must_check int __media_pipeline_start(struct media_pad *pad,
  * media_pipeline_stop - Mark a pipeline as not streaming
  * @pad: Starting pad
  *
- * Mark all pads connected to a given pads through enabled links, either
+ * Mark all pads connected to a given pad through enabled links, either
  * directly or indirectly, as not streaming. The media_pad pipe field is
  * reset to %NULL.
  *
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 2f80c9c818ed..b15fa9930f30 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -176,7 +176,10 @@ struct v4l2_subdev_io_pin_config {
  * @s_register: callback for VIDIOC_DBG_S_REGISTER() ioctl handler code.
  *
  * @s_power: puts subdevice in power saving mode (on == 0) or normal operation
- *	mode (on == 1).
+ *	mode (on == 1). DEPRECATED. See
+ *	Documentation/driver-api/media/camera-sensor.rst . pre_streamon and
+ *	post_streamoff callbacks can be used for e.g. setting the bus to LP-11
+ *	mode before s_stream is called.
  *
  * @interrupt_service_routine: Called by the bridge chip's interrupt service
  *	handler, when an interrupt status has be raised due to this subdev,
@@ -437,8 +440,10 @@ enum v4l2_subdev_pre_streamon_flags {
  * @g_input_status: get input status. Same as the status field in the
  *	&struct v4l2_input
  *
- * @s_stream: used to notify the driver that a video stream will start or has
- *	stopped.
+ * @s_stream: start (enabled == 1) or stop (enabled == 0) streaming on the
+ *	sub-device. Failure on stop will remove any resources acquired in
+ *	streaming start, while the error code is still returned by the driver.
+ *	Also see call_s_stream wrapper in v4l2-subdev.c.
  *
  * @g_pixelaspect: callback to return the pixelaspect ratio.
  *
diff --git a/include/uapi/linux/media-bus-format.h b/include/uapi/linux/media-bus-format.h
index ec3323dbb927..ca9a24c874da 100644
--- a/include/uapi/linux/media-bus-format.h
+++ b/include/uapi/linux/media-bus-format.h
@@ -69,7 +69,7 @@
 #define MEDIA_BUS_FMT_RGB121212_1X36		0x1019
 #define MEDIA_BUS_FMT_RGB161616_1X48		0x101a
 
-/* YUV (including grey) - next is	0x202e */
+/* YUV (including grey) - next is	0x202f */
 #define MEDIA_BUS_FMT_Y8_1X8			0x2001
 #define MEDIA_BUS_FMT_UV8_1X8			0x2015
 #define MEDIA_BUS_FMT_UYVY8_1_5X8		0x2002
@@ -92,6 +92,7 @@
 #define MEDIA_BUS_FMT_YUYV12_2X12		0x201e
 #define MEDIA_BUS_FMT_YVYU12_2X12		0x201f
 #define MEDIA_BUS_FMT_Y14_1X14			0x202d
+#define MEDIA_BUS_FMT_Y16_1X16			0x202e
 #define MEDIA_BUS_FMT_UYVY8_1X16		0x200f
 #define MEDIA_BUS_FMT_VYUY8_1X16		0x2010
 #define MEDIA_BUS_FMT_YUYV8_1X16		0x2011
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index b5e7d082b8ad..d27e255ed33b 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -1019,6 +1019,8 @@ enum v4l2_auto_focus_range {
 
 #define V4L2_CID_CAMERA_SENSOR_ROTATION		(V4L2_CID_CAMERA_CLASS_BASE+35)
 
+#define V4L2_CID_HDR_SENSOR_MODE		(V4L2_CID_CAMERA_CLASS_BASE+36)
+
 /* FM Modulator class control IDs */
 
 #define V4L2_CID_FM_TX_CLASS_BASE		(V4L2_CTRL_CLASS_FM_TX | 0x900)