Merge tag 'pinctrl-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "Core changes:

   - None really.

  New drivers:

   - AMD ISP411 "AMD ISP" driver

   - Exynos 2200 and 7870 SoC subdrivers

   - Sophgo RISC-V SG2042 and SG2044 subdrivers

   - Amlogic A4 subdriver

   - Rockchip RK3528 subdriver

   - Broadcom BCM21664 subdriver

   - Allwinner A523/T527 subdriver

   - Ingenic X1600 subdriver

   - Microchip SAMA7D65 subdriver, essentially a re-branded Atmel AT91
     PIO4 driver, but nowadays a Microschip SoC line

  Improvements:

   - Bring in the devm_kmemdup_array() helper and use it throughout,
     also bring in changes to other subsystems for this to establish
     this helper

   - Support EGPIO on the Qualcomm SA8775P SoC

   - Extend EINT support in the Mediatek driver"

* tag 'pinctrl-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (101 commits)
  pinctrl: mediatek: Add EINT support for multiple addresses
  pinctrl: amlogic-a4: Drop surplus semicolon
  pinctrl: nuvoton: Reduce use of OF-specific APIs
  pinctrl: nuvoton: Convert to use struct group_desc
  pinctrl: nuvoton: Make use of struct pinfunction and PINCTRL_PINFUNCTION()
  pinctrl: nuvoton: Convert to use struct pingroup and PINCTRL_PINGROUP()
  pinctrl: npcm8xx: Fix incorrect struct npcm8xx_pincfg assignment
  pinctrl: tegra: Fix off by one in tegra_pinctrl_get_group()
  pinctrl: PINCTRL_AMDISP should depend on DRM_AMD_ISP
  pinctrl: qcom: sa8775p: Enable egpio function
  dt-bindings: pinctrl: qcom: Add egpio function for sa8775p
  pinctrl: qcom: tlmm-test: Validate irq_enable delivers edge irqs
  pinctrl: qcom: Clear latched interrupt status when changing IRQ type
  dt-bindings: pinctrl: airoha: Add missing gpio-ranges property
  pinctrl: bcm281xx: Add missing assignment in bcm21664_pinctrl_lock_all()
  pinctrl: amd: isp411: Fix IS_ERR() vs NULL check in probe()
  dt-bindings: pinctrl: at91-pio4: add microchip,sama7d65-pinctrl
  pinctrl: tegra: Set SFIO mode to Mux Register
  pinctrl-tegra: Restore SFSEL bit when freeing pins
  pinctrl: tegra: Add descriptions for SoC data fields
  ...

5 files changed, 497 insertions, 3 deletions

diff --git a/include/dt-bindings/pinctrl/amlogic,pinctrl.h b/include/dt-bindings/pinctrl/amlogic,pinctrl.h
new file mode 100644
index 000000000000..7d40aecc7147
--- /dev/null
+++ b/include/dt-bindings/pinctrl/amlogic,pinctrl.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
+ * Author: Xianwei Zhao <xianwei.zhao@amlogic.com>
+ */
+
+#ifndef _DT_BINDINGS_AMLOGIC_PINCTRL_H
+#define _DT_BINDINGS_AMLOGIC_PINCTRL_H
+/* Normal PIN bank */
+#define AMLOGIC_GPIO_A		0
+#define AMLOGIC_GPIO_B		1
+#define AMLOGIC_GPIO_C		2
+#define AMLOGIC_GPIO_D		3
+#define AMLOGIC_GPIO_E		4
+#define AMLOGIC_GPIO_F		5
+#define AMLOGIC_GPIO_G		6
+#define AMLOGIC_GPIO_H		7
+#define AMLOGIC_GPIO_I		8
+#define AMLOGIC_GPIO_J		9
+#define AMLOGIC_GPIO_K		10
+#define AMLOGIC_GPIO_L		11
+#define AMLOGIC_GPIO_M		12
+#define AMLOGIC_GPIO_N		13
+#define AMLOGIC_GPIO_O		14
+#define AMLOGIC_GPIO_P		15
+#define AMLOGIC_GPIO_Q		16
+#define AMLOGIC_GPIO_R		17
+#define AMLOGIC_GPIO_S		18
+#define AMLOGIC_GPIO_T		19
+#define AMLOGIC_GPIO_U		20
+#define AMLOGIC_GPIO_V		21
+#define AMLOGIC_GPIO_W		22
+#define AMLOGIC_GPIO_X		23
+#define AMLOGIC_GPIO_Y		24
+#define AMLOGIC_GPIO_Z		25
+
+/* Special PIN bank */
+#define AMLOGIC_GPIO_DV		26
+#define AMLOGIC_GPIO_AO		27
+#define AMLOGIC_GPIO_CC		28
+#define AMLOGIC_GPIO_TEST_N	29
+#define AMLOGIC_GPIO_ANALOG	30
+
+#define AML_PINMUX(bank, offset, mode)	(((((bank) << 8) + (offset)) << 8) | (mode))
+
+#endif /* _DT_BINDINGS_AMLOGIC_PINCTRL_H */
diff --git a/include/dt-bindings/pinctrl/pinctrl-sg2042.h b/include/dt-bindings/pinctrl/pinctrl-sg2042.h
new file mode 100644
index 000000000000..79d5bb8e04f8
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pinctrl-sg2042.h
@@ -0,0 +1,196 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
+ *
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_SG2042_H
+#define _DT_BINDINGS_PINCTRL_SG2042_H
+
+#define PINMUX(pin, mux) \
+	(((pin) & 0xffff) | (((mux) & 0xff) << 16))
+
+#define PIN_LPC_LCLK			0
+#define PIN_LPC_LFRAME			1
+#define PIN_LPC_LAD0			2
+#define PIN_LPC_LAD1			3
+#define PIN_LPC_LAD2			4
+#define PIN_LPC_LAD3			5
+#define PIN_LPC_LDRQ0			6
+#define PIN_LPC_LDRQ1			7
+#define PIN_LPC_SERIRQ			8
+#define PIN_LPC_CLKRUN			9
+#define PIN_LPC_LPME			10
+#define PIN_LPC_LPCPD			11
+#define PIN_LPC_LSMI			12
+#define PIN_PCIE0_L0_RESET		13
+#define PIN_PCIE0_L1_RESET		14
+#define PIN_PCIE0_L0_WAKEUP		15
+#define PIN_PCIE0_L1_WAKEUP		16
+#define PIN_PCIE0_L0_CLKREQ_IN		17
+#define PIN_PCIE0_L1_CLKREQ_IN		18
+#define PIN_PCIE1_L0_RESET		19
+#define PIN_PCIE1_L1_RESET		20
+#define PIN_PCIE1_L0_WAKEUP		21
+#define PIN_PCIE1_L1_WAKEUP		22
+#define PIN_PCIE1_L0_CLKREQ_IN		23
+#define PIN_PCIE1_L1_CLKREQ_IN		24
+#define PIN_SPIF0_CLK_SEL1		25
+#define PIN_SPIF0_CLK_SEL0		26
+#define PIN_SPIF0_WP			27
+#define PIN_SPIF0_HOLD			28
+#define PIN_SPIF0_SDI			29
+#define PIN_SPIF0_CS			30
+#define PIN_SPIF0_SCK			31
+#define PIN_SPIF0_SDO			32
+#define PIN_SPIF1_CLK_SEL1		33
+#define PIN_SPIF1_CLK_SEL0		34
+#define PIN_SPIF1_WP			35
+#define PIN_SPIF1_HOLD			36
+#define PIN_SPIF1_SDI			37
+#define PIN_SPIF1_CS			38
+#define PIN_SPIF1_SCK			39
+#define PIN_SPIF1_SDO			40
+#define PIN_EMMC_WP			41
+#define PIN_EMMC_CD			42
+#define PIN_EMMC_RST			43
+#define PIN_EMMC_PWR_EN			44
+#define PIN_SDIO_CD			45
+#define PIN_SDIO_WP			46
+#define PIN_SDIO_RST			47
+#define PIN_SDIO_PWR_EN			48
+#define PIN_RGMII0_TXD0			49
+#define PIN_RGMII0_TXD1			50
+#define PIN_RGMII0_TXD2			51
+#define PIN_RGMII0_TXD3			52
+#define PIN_RGMII0_TXCTRL		53
+#define PIN_RGMII0_RXD0			54
+#define PIN_RGMII0_RXD1			55
+#define PIN_RGMII0_RXD2			56
+#define PIN_RGMII0_RXD3			57
+#define PIN_RGMII0_RXCTRL		58
+#define PIN_RGMII0_TXC			59
+#define PIN_RGMII0_RXC			60
+#define PIN_RGMII0_REFCLKO		61
+#define PIN_RGMII0_IRQ			62
+#define PIN_RGMII0_MDC			63
+#define PIN_RGMII0_MDIO			64
+#define PIN_PWM0			65
+#define PIN_PWM1			66
+#define PIN_PWM2			67
+#define PIN_PWM3			68
+#define PIN_FAN0			69
+#define PIN_FAN1			70
+#define PIN_FAN2			71
+#define PIN_FAN3			72
+#define PIN_IIC0_SDA			73
+#define PIN_IIC0_SCL			74
+#define PIN_IIC1_SDA			75
+#define PIN_IIC1_SCL			76
+#define PIN_IIC2_SDA			77
+#define PIN_IIC2_SCL			78
+#define PIN_IIC3_SDA			79
+#define PIN_IIC3_SCL			80
+#define PIN_UART0_TX			81
+#define PIN_UART0_RX			82
+#define PIN_UART0_RTS			83
+#define PIN_UART0_CTS			84
+#define PIN_UART1_TX			85
+#define PIN_UART1_RX			86
+#define PIN_UART1_RTS			87
+#define PIN_UART1_CTS			88
+#define PIN_UART2_TX			89
+#define PIN_UART2_RX			90
+#define PIN_UART2_RTS			91
+#define PIN_UART2_CTS			92
+#define PIN_UART3_TX			93
+#define PIN_UART3_RX			94
+#define PIN_UART3_RTS			95
+#define PIN_UART3_CTS			96
+#define PIN_SPI0_CS0			97
+#define PIN_SPI0_CS1			98
+#define PIN_SPI0_SDI			99
+#define PIN_SPI0_SDO			100
+#define PIN_SPI0_SCK			101
+#define PIN_SPI1_CS0			102
+#define PIN_SPI1_CS1			103
+#define PIN_SPI1_SDI			104
+#define PIN_SPI1_SDO			105
+#define PIN_SPI1_SCK			106
+#define PIN_JTAG0_TDO			107
+#define PIN_JTAG0_TCK			108
+#define PIN_JTAG0_TDI			109
+#define PIN_JTAG0_TMS			110
+#define PIN_JTAG0_TRST			111
+#define PIN_JTAG0_SRST			112
+#define PIN_JTAG1_TDO			113
+#define PIN_JTAG1_TCK			114
+#define PIN_JTAG1_TDI			115
+#define PIN_JTAG1_TMS			116
+#define PIN_JTAG1_TRST			117
+#define PIN_JTAG1_SRST			118
+#define PIN_JTAG2_TDO			119
+#define PIN_JTAG2_TCK			120
+#define PIN_JTAG2_TDI			121
+#define PIN_JTAG2_TMS			122
+#define PIN_JTAG2_TRST			123
+#define PIN_JTAG2_SRST			124
+#define PIN_GPIO0			125
+#define PIN_GPIO1			126
+#define PIN_GPIO2			127
+#define PIN_GPIO3			128
+#define PIN_GPIO4			129
+#define PIN_GPIO5			130
+#define PIN_GPIO6			131
+#define PIN_GPIO7			132
+#define PIN_GPIO8			133
+#define PIN_GPIO9			134
+#define PIN_GPIO10			135
+#define PIN_GPIO11			136
+#define PIN_GPIO12			137
+#define PIN_GPIO13			138
+#define PIN_GPIO14			139
+#define PIN_GPIO15			140
+#define PIN_GPIO16			141
+#define PIN_GPIO17			142
+#define PIN_GPIO18			143
+#define PIN_GPIO19			144
+#define PIN_GPIO20			145
+#define PIN_GPIO21			146
+#define PIN_GPIO22			147
+#define PIN_GPIO23			148
+#define PIN_GPIO24			149
+#define PIN_GPIO25			150
+#define PIN_GPIO26			151
+#define PIN_GPIO27			152
+#define PIN_GPIO28			153
+#define PIN_GPIO29			154
+#define PIN_GPIO30			155
+#define PIN_GPIO31			156
+#define PIN_MODE_SEL0			157
+#define PIN_MODE_SEL1			158
+#define PIN_MODE_SEL2			159
+#define PIN_BOOT_SEL0			160
+#define PIN_BOOT_SEL1			161
+#define PIN_BOOT_SEL2			162
+#define PIN_BOOT_SEL3			163
+#define PIN_BOOT_SEL4			164
+#define PIN_BOOT_SEL5			165
+#define PIN_BOOT_SEL6			166
+#define PIN_BOOT_SEL7			167
+#define PIN_MULTI_SCKT			168
+#define PIN_SCKT_ID0			169
+#define PIN_SCKT_ID1			170
+#define PIN_PLL_CLK_IN_MAIN		171
+#define PIN_PLL_CLK_IN_DDR_L		172
+#define PIN_PLL_CLK_IN_DDR_R		173
+#define PIN_XTAL_32K			174
+#define PIN_SYS_RST			175
+#define PIN_PWR_BUTTON			176
+#define PIN_TEST_EN			177
+#define PIN_TEST_MODE_MBIST		178
+#define PIN_TEST_MODE_SCAN		179
+#define PIN_TEST_MODE_BSD		180
+#define PIN_BISR_BYP			181
+
+#endif /* _DT_BINDINGS_PINCTRL_SG2042_H */
diff --git a/include/dt-bindings/pinctrl/pinctrl-sg2044.h b/include/dt-bindings/pinctrl/pinctrl-sg2044.h
new file mode 100644
index 000000000000..2a619f681c39
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pinctrl-sg2044.h
@@ -0,0 +1,221 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
+ *
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_SG2044_H
+#define _DT_BINDINGS_PINCTRL_SG2044_H
+
+#define PINMUX(pin, mux) \
+	(((pin) & 0xffff) | (((mux) & 0xff) << 16))
+
+#define PIN_IIC0_SMBSUS_IN		0
+#define PIN_IIC0_SMBSUS_OUT		1
+#define PIN_IIC0_SMBALERT		2
+#define PIN_IIC1_SMBSUS_IN		3
+#define PIN_IIC1_SMBSUS_OUT		4
+#define PIN_IIC1_SMBALERT		5
+#define PIN_IIC2_SMBSUS_IN		6
+#define PIN_IIC2_SMBSUS_OUT		7
+#define PIN_IIC2_SMBALERT		8
+#define PIN_IIC3_SMBSUS_IN		9
+#define PIN_IIC3_SMBSUS_OUT		10
+#define PIN_IIC3_SMBALERT		11
+#define PIN_PCIE0_L0_RESET		12
+#define PIN_PCIE0_L1_RESET		13
+#define PIN_PCIE0_L0_WAKEUP		14
+#define PIN_PCIE0_L1_WAKEUP		15
+#define PIN_PCIE0_L0_CLKREQ_IN		16
+#define PIN_PCIE0_L1_CLKREQ_IN		17
+#define PIN_PCIE1_L0_RESET		18
+#define PIN_PCIE1_L1_RESET		19
+#define PIN_PCIE1_L0_WAKEUP		20
+#define PIN_PCIE1_L1_WAKEUP		21
+#define PIN_PCIE1_L0_CLKREQ_IN		22
+#define PIN_PCIE1_L1_CLKREQ_IN		23
+#define PIN_PCIE2_L0_RESET		24
+#define PIN_PCIE2_L1_RESET		25
+#define PIN_PCIE2_L0_WAKEUP		26
+#define PIN_PCIE2_L1_WAKEUP		27
+#define PIN_PCIE2_L0_CLKREQ_IN		28
+#define PIN_PCIE2_L1_CLKREQ_IN		29
+#define PIN_PCIE3_L0_RESET		30
+#define PIN_PCIE3_L1_RESET		31
+#define PIN_PCIE3_L0_WAKEUP		32
+#define PIN_PCIE3_L1_WAKEUP		33
+#define PIN_PCIE3_L0_CLKREQ_IN		34
+#define PIN_PCIE3_L1_CLKREQ_IN		35
+#define PIN_PCIE4_L0_RESET		36
+#define PIN_PCIE4_L1_RESET		37
+#define PIN_PCIE4_L0_WAKEUP		38
+#define PIN_PCIE4_L1_WAKEUP		39
+#define PIN_PCIE4_L0_CLKREQ_IN		40
+#define PIN_PCIE4_L1_CLKREQ_IN		41
+#define PIN_SPIF0_CLK_SEL1		42
+#define PIN_SPIF0_CLK_SEL0		43
+#define PIN_SPIF0_WP			44
+#define PIN_SPIF0_HOLD			45
+#define PIN_SPIF0_SDI			46
+#define PIN_SPIF0_CS			47
+#define PIN_SPIF0_SCK			48
+#define PIN_SPIF0_SDO			49
+#define PIN_SPIF1_CLK_SEL1		50
+#define PIN_SPIF1_CLK_SEL0		51
+#define PIN_SPIF1_WP			52
+#define PIN_SPIF1_HOLD			53
+#define PIN_SPIF1_SDI			54
+#define PIN_SPIF1_CS			55
+#define PIN_SPIF1_SCK			56
+#define PIN_SPIF1_SDO			57
+#define PIN_EMMC_WP			58
+#define PIN_EMMC_CD			59
+#define PIN_EMMC_RST			60
+#define PIN_EMMC_PWR_EN			61
+#define PIN_SDIO_CD			62
+#define PIN_SDIO_WP			63
+#define PIN_SDIO_RST			64
+#define PIN_SDIO_PWR_EN			65
+#define PIN_RGMII0_TXD0			66
+#define PIN_RGMII0_TXD1			67
+#define PIN_RGMII0_TXD2			68
+#define PIN_RGMII0_TXD3			69
+#define PIN_RGMII0_TXCTRL		70
+#define PIN_RGMII0_RXD0			71
+#define PIN_RGMII0_RXD1			72
+#define PIN_RGMII0_RXD2			73
+#define PIN_RGMII0_RXD3			74
+#define PIN_RGMII0_RXCTRL		75
+#define PIN_RGMII0_TXC			76
+#define PIN_RGMII0_RXC			77
+#define PIN_RGMII0_REFCLKO		78
+#define PIN_RGMII0_IRQ			79
+#define PIN_RGMII0_MDC			80
+#define PIN_RGMII0_MDIO			81
+#define PIN_PWM0			82
+#define PIN_PWM1			83
+#define PIN_PWM2			84
+#define PIN_PWM3			85
+#define PIN_FAN0			86
+#define PIN_FAN1			87
+#define PIN_FAN2			88
+#define PIN_FAN3			89
+#define PIN_IIC0_SDA			90
+#define PIN_IIC0_SCL			91
+#define PIN_IIC1_SDA			92
+#define PIN_IIC1_SCL			93
+#define PIN_IIC2_SDA			94
+#define PIN_IIC2_SCL			95
+#define PIN_IIC3_SDA			96
+#define PIN_IIC3_SCL			97
+#define PIN_UART0_TX			98
+#define PIN_UART0_RX			99
+#define PIN_UART0_RTS			100
+#define PIN_UART0_CTS			101
+#define PIN_UART1_TX			102
+#define PIN_UART1_RX			103
+#define PIN_UART1_RTS			104
+#define PIN_UART1_CTS			105
+#define PIN_UART2_TX			106
+#define PIN_UART2_RX			107
+#define PIN_UART2_RTS			108
+#define PIN_UART2_CTS			109
+#define PIN_UART3_TX			110
+#define PIN_UART3_RX			111
+#define PIN_UART3_RTS			112
+#define PIN_UART3_CTS			113
+#define PIN_SPI0_CS0			114
+#define PIN_SPI0_CS1			115
+#define PIN_SPI0_SDI			116
+#define PIN_SPI0_SDO			117
+#define PIN_SPI0_SCK			118
+#define PIN_SPI1_CS0			119
+#define PIN_SPI1_CS1			120
+#define PIN_SPI1_SDI			121
+#define PIN_SPI1_SDO			122
+#define PIN_SPI1_SCK			123
+#define PIN_JTAG0_TDO			124
+#define PIN_JTAG0_TCK			125
+#define PIN_JTAG0_TDI			126
+#define PIN_JTAG0_TMS			127
+#define PIN_JTAG0_TRST			128
+#define PIN_JTAG0_SRST			129
+#define PIN_JTAG1_TDO			130
+#define PIN_JTAG1_TCK			131
+#define PIN_JTAG1_TDI			132
+#define PIN_JTAG1_TMS			133
+#define PIN_JTAG1_TRST			134
+#define PIN_JTAG1_SRST			135
+#define PIN_JTAG2_TDO			136
+#define PIN_JTAG2_TCK			137
+#define PIN_JTAG2_TDI			138
+#define PIN_JTAG2_TMS			139
+#define PIN_JTAG2_TRST			140
+#define PIN_JTAG2_SRST			141
+#define PIN_JTAG3_TDO			142
+#define PIN_JTAG3_TCK			143
+#define PIN_JTAG3_TDI			144
+#define PIN_JTAG3_TMS			145
+#define PIN_JTAG3_TRST			146
+#define PIN_JTAG3_SRST			147
+#define PIN_GPIO0			148
+#define PIN_GPIO1			149
+#define PIN_GPIO2			150
+#define PIN_GPIO3			151
+#define PIN_GPIO4			152
+#define PIN_GPIO5			153
+#define PIN_GPIO6			154
+#define PIN_GPIO7			155
+#define PIN_GPIO8			156
+#define PIN_GPIO9			157
+#define PIN_GPIO10			158
+#define PIN_GPIO11			159
+#define PIN_GPIO12			160
+#define PIN_GPIO13			161
+#define PIN_GPIO14			162
+#define PIN_GPIO15			163
+#define PIN_GPIO16			164
+#define PIN_GPIO17			165
+#define PIN_GPIO18			166
+#define PIN_GPIO19			167
+#define PIN_GPIO20			168
+#define PIN_GPIO21			169
+#define PIN_GPIO22			170
+#define PIN_GPIO23			171
+#define PIN_GPIO24			172
+#define PIN_GPIO25			173
+#define PIN_GPIO26			174
+#define PIN_GPIO27			175
+#define PIN_GPIO28			176
+#define PIN_GPIO29			177
+#define PIN_GPIO30			178
+#define PIN_GPIO31			179
+#define PIN_MODE_SEL0			180
+#define PIN_MODE_SEL1			181
+#define PIN_MODE_SEL2			182
+#define PIN_BOOT_SEL0			183
+#define PIN_BOOT_SEL1			184
+#define PIN_BOOT_SEL2			185
+#define PIN_BOOT_SEL3			186
+#define PIN_BOOT_SEL4			187
+#define PIN_BOOT_SEL5			188
+#define PIN_BOOT_SEL6			189
+#define PIN_BOOT_SEL7			190
+#define PIN_MULTI_SCKT			191
+#define PIN_SCKT_ID0			192
+#define PIN_SCKT_ID1			193
+#define PIN_PLL_CLK_IN_MAIN		194
+#define PIN_PLL_CLK_IN_DDR_0		195
+#define PIN_PLL_CLK_IN_DDR_1		196
+#define PIN_PLL_CLK_IN_DDR_2		197
+#define PIN_PLL_CLK_IN_DDR_3		198
+#define PIN_XTAL_32K			199
+#define PIN_SYS_RST			200
+#define PIN_PWR_BUTTON			201
+#define PIN_TEST_EN			202
+#define PIN_TEST_MODE_MBIST		203
+#define PIN_TEST_MODE_SCAN		204
+#define PIN_TEST_MODE_BSD		205
+#define PIN_BISR_BYP			206
+
+#endif /* _DT_BINDINGS_PINCTRL_SG2044_H */
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 53cfde98433d..1bcf071b860e 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -232,4 +232,8 @@ static inline int pinconf_generic_dt_node_to_map_all(struct pinctrl_dev *pctldev
 			PIN_MAP_TYPE_INVALID);
 }
 
+int pinconf_generic_dt_node_to_map_pinmux(struct pinctrl_dev *pctldev,
+					  struct device_node *np,
+					  struct pinctrl_map **map,
+					  unsigned int *num_maps);
 #endif /* __LINUX_PINCTRL_PINCONF_GENERIC_H */
diff --git a/include/linux/platform_data/x86/pwm-lpss.h b/include/linux/platform_data/x86/pwm-lpss.h
index 752c06b47cc8..f0349edb47f4 100644
--- a/include/linux/platform_data/x86/pwm-lpss.h
+++ b/include/linux/platform_data/x86/pwm-lpss.h
@@ -15,9 +15,36 @@ struct pwm_lpss_boardinfo {
 	unsigned int npwm;
 	unsigned long base_unit_bits;
 	/*
-	 * Some versions of the IP may stuck in the state machine if enable
-	 * bit is not set, and hence update bit will show busy status till
-	 * the reset. For the rest it may be otherwise.
+	 * NOTE:
+	 * Intel Broxton, Apollo Lake, and Gemini Lake have different programming flow.
+	 *
+	 * Initial Enable or First Activation
+	 * 1. Program the base unit and on time divisor values.
+	 * 2. Set the software update bit.
+	 * 3. Poll in a loop on the PWMCTRL bit until software update bit is cleared.+
+	 * 4. Enable the PWM output by setting PWM Enable.
+	 * 5. Repeat the above steps for the next PWM Module.
+	 *
+	 * Dynamic update while PWM is Enabled
+	 * 1. Program the base unit and on-time divisor values.
+	 * 2. Set the software update bit.
+	 * 3. Repeat the above steps for the next PWM module.
+	 *
+	 * + After setting PWMCTRL register's SW update bit, hardware automatically
+	 * deasserts the SW update bit after a brief delay. It was observed that
+	 * setting of PWM enable is typically done via read-modify-write of the PWMCTRL
+	 * register. If there is no/little delay between setting software update bit
+	 * and setting enable bit via read-modify-write, it is possible that the read
+	 * could return with software enable as 1. In that case, the last write to set
+	 * enable to 1 could also set sw_update to 1. If this happens, sw_update gets
+	 * stuck and the driver code can hang as it explicitly waits for sw_update bit
+	 * to be 0 after setting the enable bit to 1. To avoid this race condition,
+	 * SW should poll on the software update bit to make sure that it is 0 before
+	 * doing the read-modify-write to set the enable bit to 1.
+	 *
+	 * Also, we noted that if sw_update bit was set in step #1 above then when it
+	 * is set again in step #2, sw_update bit never gets cleared and the flow hangs.
+	 * As such, we need to make sure that sw_update bit is 0 when doing step #1.
 	 */
 	bool bypass;
 	/*