mm: enable lazy_mmu sections to nest

Despite recent efforts to prevent lazy_mmu sections from nesting, it
remains difficult to ensure that it never occurs - and in fact it does
occur on arm64 in certain situations (CONFIG_DEBUG_PAGEALLOC).  Commit
1ef3095b1405 ("arm64/mm: Permit lazy_mmu_mode to be nested") made nesting
tolerable on arm64, but without truly supporting it: the inner call to
leave() disables the batching optimisation before the outer section ends.

This patch actually enables lazy_mmu sections to nest by tracking the
nesting level in task_struct, in a similar fashion to e.g. 
pagefault_{enable,disable}().  This is fully handled by the generic
lazy_mmu helpers that were recently introduced.

lazy_mmu sections were not initially intended to nest, so we need to
clarify the semantics w.r.t.  the arch_*_lazy_mmu_mode() callbacks.  This
patch takes the following approach:

* The outermost calls to lazy_mmu_mode_{enable,disable}() trigger
  calls to arch_{enter,leave}_lazy_mmu_mode() - this is unchanged.

* Nested calls to lazy_mmu_mode_{enable,disable}() are not forwarded
  to the arch via arch_{enter,leave} - lazy MMU remains enabled so
  the assumption is that these callbacks are not relevant. However,
  existing code may rely on a call to disable() to flush any batched
  state, regardless of nesting. arch_flush_lazy_mmu_mode() is
  therefore called in that situation.

A separate interface was recently introduced to temporarily pause the lazy
MMU mode: lazy_mmu_mode_{pause,resume}().  pause() fully exits the mode
*regardless of the nesting level*, and resume() restores the mode at the
same nesting level.

pause()/resume() are themselves allowed to nest, so we actually store two
nesting levels in task_struct: enable_count and pause_count.  A new helper
is_lazy_mmu_mode_active() is introduced to determine whether we are
currently in lazy MMU mode; this will be used in subsequent patches to
replace the various ways arch's currently track whether the mode is
enabled.

In summary (enable/pause represent the values *after* the call):

lazy_mmu_mode_enable()		-> arch_enter()	    enable=1 pause=0
    lazy_mmu_mode_enable()	-> ø		    enable=2 pause=0
	lazy_mmu_mode_pause()	-> arch_leave()     enable=2 pause=1
	lazy_mmu_mode_resume()	-> arch_enter()     enable=2 pause=0
    lazy_mmu_mode_disable()	-> arch_flush()     enable=1 pause=0
lazy_mmu_mode_disable()		-> arch_leave()     enable=0 pause=0

Note: is_lazy_mmu_mode_active() is added to <linux/sched.h> to allow
arch headers included by <linux/pgtable.h> to use it.

Link: https://lkml.kernel.org/r/20251215150323.2218608-10-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Juegren Gross <jgross@suse.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

3 files changed, 157 insertions, 7 deletions

diff --git a/include/linux/mm_types_task.h b/include/linux/mm_types_task.h
index a82aa80c0ba4..11bf319d78ec 100644
--- a/include/linux/mm_types_task.h
+++ b/include/linux/mm_types_task.h
@@ -88,4 +88,9 @@ struct tlbflush_unmap_batch {
 #endif
 };
 
+struct lazy_mmu_state {
+	u8 enable_count;
+	u8 pause_count;
+};
+
 #endif /* _LINUX_MM_TYPES_TASK_H */
diff --git a/include/linux/pgtable.h b/include/linux/pgtable.h
index dddde6873d1e..2f0dd3a4ace1 100644
--- a/include/linux/pgtable.h
+++ b/include/linux/pgtable.h
@@ -236,39 +236,139 @@ static inline int pmd_dirty(pmd_t pmd)
  * The mode is disabled in interrupt context and calls to the lazy_mmu API have
  * no effect.
  *
- * Nesting is not permitted.
+ * The lazy MMU mode is enabled for a given block of code using:
+ *
+ *   lazy_mmu_mode_enable();
+ *   <code>
+ *   lazy_mmu_mode_disable();
+ *
+ * Nesting is permitted: <code> may itself use an enable()/disable() pair.
+ * A nested call to enable() has no functional effect; however disable() causes
+ * any batched architectural state to be flushed regardless of nesting. After a
+ * call to disable(), the caller can therefore rely on all previous page table
+ * modifications to have taken effect, but the lazy MMU mode may still be
+ * enabled.
+ *
+ * In certain cases, it may be desirable to temporarily pause the lazy MMU mode.
+ * This can be done using:
+ *
+ *   lazy_mmu_mode_pause();
+ *   <code>
+ *   lazy_mmu_mode_resume();
+ *
+ * pause() ensures that the mode is exited regardless of the nesting level;
+ * resume() re-enters the mode at the same nesting level. Any call to the
+ * lazy_mmu_mode_* API between those two calls has no effect. In particular,
+ * this means that pause()/resume() pairs may nest.
+ *
+ * is_lazy_mmu_mode_active() can be used to check whether the lazy MMU mode is
+ * currently enabled.
  */
 #ifdef CONFIG_ARCH_HAS_LAZY_MMU_MODE
+/**
+ * lazy_mmu_mode_enable() - Enable the lazy MMU mode.
+ *
+ * Enters a new lazy MMU mode section; if the mode was not already enabled,
+ * enables it and calls arch_enter_lazy_mmu_mode().
+ *
+ * Must be paired with a call to lazy_mmu_mode_disable().
+ *
+ * Has no effect if called:
+ * - While paused - see lazy_mmu_mode_pause()
+ * - In interrupt context
+ */
 static inline void lazy_mmu_mode_enable(void)
 {
-	if (in_interrupt())
+	struct lazy_mmu_state *state = &current->lazy_mmu_state;
+
+	if (in_interrupt() || state->pause_count > 0)
 		return;
 
-	arch_enter_lazy_mmu_mode();
+	VM_WARN_ON_ONCE(state->enable_count == U8_MAX);
+
+	if (state->enable_count++ == 0)
+		arch_enter_lazy_mmu_mode();
 }
 
+/**
+ * lazy_mmu_mode_disable() - Disable the lazy MMU mode.
+ *
+ * Exits the current lazy MMU mode section. If it is the outermost section,
+ * disables the mode and calls arch_leave_lazy_mmu_mode(). Otherwise (nested
+ * section), calls arch_flush_lazy_mmu_mode().
+ *
+ * Must match a call to lazy_mmu_mode_enable().
+ *
+ * Has no effect if called:
+ * - While paused - see lazy_mmu_mode_pause()
+ * - In interrupt context
+ */
 static inline void lazy_mmu_mode_disable(void)
 {
-	if (in_interrupt())
+	struct lazy_mmu_state *state = &current->lazy_mmu_state;
+
+	if (in_interrupt() || state->pause_count > 0)
 		return;
 
-	arch_leave_lazy_mmu_mode();
+	VM_WARN_ON_ONCE(state->enable_count == 0);
+
+	if (--state->enable_count == 0)
+		arch_leave_lazy_mmu_mode();
+	else /* Exiting a nested section */
+		arch_flush_lazy_mmu_mode();
+
 }
 
+/**
+ * lazy_mmu_mode_pause() - Pause the lazy MMU mode.
+ *
+ * Pauses the lazy MMU mode; if it is currently active, disables it and calls
+ * arch_leave_lazy_mmu_mode().
+ *
+ * Must be paired with a call to lazy_mmu_mode_resume(). Calls to the
+ * lazy_mmu_mode_* API have no effect until the matching resume() call.
+ *
+ * Has no effect if called:
+ * - While paused (inside another pause()/resume() pair)
+ * - In interrupt context
+ */
 static inline void lazy_mmu_mode_pause(void)
 {
+	struct lazy_mmu_state *state = &current->lazy_mmu_state;
+
 	if (in_interrupt())
 		return;
 
-	arch_leave_lazy_mmu_mode();
+	VM_WARN_ON_ONCE(state->pause_count == U8_MAX);
+
+	if (state->pause_count++ == 0 && state->enable_count > 0)
+		arch_leave_lazy_mmu_mode();
 }
 
+/**
+ * lazy_mmu_mode_resume() - Resume the lazy MMU mode.
+ *
+ * Resumes the lazy MMU mode; if it was active at the point where the matching
+ * call to lazy_mmu_mode_pause() was made, re-enables it and calls
+ * arch_enter_lazy_mmu_mode().
+ *
+ * Must match a call to lazy_mmu_mode_pause().
+ *
+ * Has no effect if called:
+ * - While paused (inside another pause()/resume() pair)
+ * - In interrupt context
+ */
 static inline void lazy_mmu_mode_resume(void)
 {
+	struct lazy_mmu_state *state = &current->lazy_mmu_state;
+
 	if (in_interrupt())
 		return;
 
-	arch_enter_lazy_mmu_mode();
+	VM_WARN_ON_ONCE(state->pause_count == 0);
+
+	if (--state->pause_count == 0 && state->enable_count > 0)
+		arch_enter_lazy_mmu_mode();
 }
 #else
 static inline void lazy_mmu_mode_enable(void) {}
diff --git a/include/linux/sched.h b/include/linux/sched.h
index da0133524d08..6b563d4e68f6 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1419,6 +1419,10 @@ struct task_struct {
 
 	struct page_frag		task_frag;
 
+#ifdef CONFIG_ARCH_HAS_LAZY_MMU_MODE
+	struct lazy_mmu_state		lazy_mmu_state;
+#endif
+
 #ifdef CONFIG_TASK_DELAY_ACCT
 	struct task_delay_info		*delays;
 #endif
@@ -1702,6 +1706,47 @@ static inline char task_state_to_char(struct task_struct *tsk)
 	return task_index_to_char(task_state_index(tsk));
 }
 
+#ifdef CONFIG_ARCH_HAS_LAZY_MMU_MODE
+/**
+ * __task_lazy_mmu_mode_active() - Test the lazy MMU mode state for a task.
+ * @tsk: The task to check.
+ *
+ * Test whether @tsk has its lazy MMU mode state set to active (i.e. enabled
+ * and not paused).
+ *
+ * This function only considers the state saved in task_struct; to test whether
+ * current actually is in lazy MMU mode, is_lazy_mmu_mode_active() should be
+ * used instead.
+ *
+ * This function is intended for architectures that implement the lazy MMU
+ * mode; it must not be called from generic code.
+ */
+static inline bool __task_lazy_mmu_mode_active(struct task_struct *tsk)
+{
+	struct lazy_mmu_state *state = &tsk->lazy_mmu_state;
+
+	return state->enable_count > 0 && state->pause_count == 0;
+}
+
+/**
+ * is_lazy_mmu_mode_active() - Test whether we are currently in lazy MMU mode.
+ *
+ * Test whether the current context is in lazy MMU mode. This is true if both:
+ * 1. We are not in interrupt context
+ * 2. Lazy MMU mode is active for the current task
+ *
+ * This function is intended for architectures that implement the lazy MMU
+ * mode; it must not be called from generic code.
+ */
+static inline bool is_lazy_mmu_mode_active(void)
+{
+	if (in_interrupt())
+		return false;
+
+	return __task_lazy_mmu_mode_active(current);
+}
+#endif
+
 extern struct pid *cad_pid;
 
 /*