spi-cadence: support transmission with

Merge series from Jun Guo <jun.guo@cixtech.com>:

The Cadence SPI IP supports configurable FIFO data widths during
integration. On some SoCs, the FIFO data width is designed to be 16 or
32 bits at the chip design stage. However, the current driver only
supports communication with an 8-bit FIFO data width. Therefore, these
patches are added to enable the driver to support communication with
16-bit and 32-bit FIFO data widths.

13 files changed, 140 insertions, 30 deletions

diff --git a/include/drm/Makefile b/include/drm/Makefile
index 1df6962556ef..48fae3f167c7 100644
--- a/include/drm/Makefile
+++ b/include/drm/Makefile
@@ -11,7 +11,7 @@ always-$(CONFIG_DRM_HEADER_TEST) += \
 quiet_cmd_hdrtest = HDRTEST $(patsubst %.hdrtest,%.h,$@)
       cmd_hdrtest = \
 		$(CC) $(c_flags) -fsyntax-only -x c /dev/null -include $< -include $<; \
-		PYTHONDONTWRITEBYTECODE=1 $(KERNELDOC) -none $(if $(CONFIG_WERROR)$(CONFIG_DRM_WERROR),-Werror) $<; \
+		PYTHONDONTWRITEBYTECODE=1 $(PYTHON3) $(KERNELDOC) -none $(if $(CONFIG_WERROR)$(CONFIG_DRM_WERROR),-Werror) $<; \
 		touch $@
 
 $(obj)/%.hdrtest: $(src)/%.h FORCE
diff --git a/include/linux/compiler_types.h b/include/linux/compiler_types.h
index 59288a2c1ad2..0a1b9598940d 100644
--- a/include/linux/compiler_types.h
+++ b/include/linux/compiler_types.h
@@ -250,10 +250,9 @@ struct ftrace_likely_data {
 /*
  * GCC does not warn about unused static inline functions for -Wunused-function.
  * Suppress the warning in clang as well by using __maybe_unused, but enable it
- * for W=1 build. This will allow clang to find unused functions. Remove the
- * __inline_maybe_unused entirely after fixing most of -Wunused-function warnings.
+ * for W=2 build. This will allow clang to find unused functions.
  */
-#ifdef KBUILD_EXTRA_WARN1
+#ifdef KBUILD_EXTRA_WARN2
 #define __inline_maybe_unused
 #else
 #define __inline_maybe_unused __maybe_unused
@@ -461,6 +460,12 @@ struct ftrace_likely_data {
 # define __nocfi
 #endif
 
+#if defined(CONFIG_ARCH_USES_CFI_GENERIC_LLVM_PASS)
+# define __nocfi_generic	__nocfi
+#else
+# define __nocfi_generic
+#endif
+
 /*
  * Any place that could be marked with the "alloc_size" attribute is also
  * a place to be marked with the "malloc" attribute, except those that may
diff --git a/include/linux/net/intel/libie/fwlog.h b/include/linux/net/intel/libie/fwlog.h
index 36b13fabca9e..7273c78c826b 100644
--- a/include/linux/net/intel/libie/fwlog.h
+++ b/include/linux/net/intel/libie/fwlog.h
@@ -78,8 +78,20 @@ struct libie_fwlog {
 	);
 };
 
+#if IS_ENABLED(CONFIG_LIBIE_FWLOG)
 int libie_fwlog_init(struct libie_fwlog *fwlog, struct libie_fwlog_api *api);
 void libie_fwlog_deinit(struct libie_fwlog *fwlog);
 void libie_fwlog_reregister(struct libie_fwlog *fwlog);
 void libie_get_fwlog_data(struct libie_fwlog *fwlog, u8 *buf, u16 len);
+#else
+static inline int libie_fwlog_init(struct libie_fwlog *fwlog,
+				   struct libie_fwlog_api *api)
+{
+	return -EOPNOTSUPP;
+}
+static inline void libie_fwlog_deinit(struct libie_fwlog *fwlog) { }
+static inline void libie_fwlog_reregister(struct libie_fwlog *fwlog) { }
+static inline void libie_get_fwlog_data(struct libie_fwlog *fwlog, u8 *buf,
+					u16 len) { }
+#endif /* CONFIG_LIBIE_FWLOG */
 #endif /* _LIBIE_FWLOG_H_ */
diff --git a/include/linux/platform_data/x86/int3472.h b/include/linux/platform_data/x86/int3472.h
index 1571e9157fa5..b1b837583d54 100644
--- a/include/linux/platform_data/x86/int3472.h
+++ b/include/linux/platform_data/x86/int3472.h
@@ -100,7 +100,6 @@ struct int3472_gpio_regulator {
 	struct regulator_consumer_supply supply_map[GPIO_REGULATOR_SUPPLY_MAP_COUNT * 2];
 	char supply_name_upper[GPIO_SUPPLY_NAME_LENGTH];
 	char regulator_name[GPIO_REGULATOR_NAME_LENGTH];
-	struct gpio_desc *ena_gpio;
 	struct regulator_dev *rdev;
 	struct regulator_desc rdesc;
 };
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 4d1780848d0e..b673c31569f3 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -401,7 +401,8 @@ virtio_net_hdr_tnl_from_skb(const struct sk_buff *skb,
 	if (!tnl_hdr_negotiated)
 		return -EINVAL;
 
-        vhdr->hash_hdr.hash_value = 0;
+	vhdr->hash_hdr.hash_value_lo = 0;
+	vhdr->hash_hdr.hash_value_hi = 0;
         vhdr->hash_hdr.hash_report = 0;
         vhdr->hash_hdr.padding = 0;
 
diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h
index bca0333f1e99..f5be96f08b9d 100644
--- a/include/net/bluetooth/mgmt.h
+++ b/include/net/bluetooth/mgmt.h
@@ -780,7 +780,7 @@ struct mgmt_adv_pattern {
 	__u8 ad_type;
 	__u8 offset;
 	__u8 length;
-	__u8 value[31];
+	__u8 value[HCI_MAX_AD_LENGTH];
 } __packed;
 
 #define MGMT_OP_ADD_ADV_PATTERNS_MONITOR	0x0052
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 781624f5913a..820e299f06b5 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -6435,6 +6435,11 @@ static inline void wiphy_delayed_work_init(struct wiphy_delayed_work *dwork,
  * after wiphy_lock() was called. Therefore, wiphy_cancel_work() can
  * use just cancel_work() instead of cancel_work_sync(), it requires
  * being in a section protected by wiphy_lock().
+ *
+ * Note that these are scheduled with a timer where the accuracy
+ * becomes less the longer in the future the scheduled timer is. Use
+ * wiphy_hrtimer_work_queue() if the timer must be not be late by more
+ * than approximately 10 percent.
  */
 void wiphy_delayed_work_queue(struct wiphy *wiphy,
 			      struct wiphy_delayed_work *dwork,
@@ -6506,6 +6511,79 @@ void wiphy_delayed_work_flush(struct wiphy *wiphy,
 bool wiphy_delayed_work_pending(struct wiphy *wiphy,
 				struct wiphy_delayed_work *dwork);
 
+struct wiphy_hrtimer_work {
+	struct wiphy_work work;
+	struct wiphy *wiphy;
+	struct hrtimer timer;
+};
+
+enum hrtimer_restart wiphy_hrtimer_work_timer(struct hrtimer *t);
+
+static inline void wiphy_hrtimer_work_init(struct wiphy_hrtimer_work *hrwork,
+					   wiphy_work_func_t func)
+{
+	hrtimer_setup(&hrwork->timer, wiphy_hrtimer_work_timer,
+		      CLOCK_BOOTTIME, HRTIMER_MODE_REL);
+	wiphy_work_init(&hrwork->work, func);
+}
+
+/**
+ * wiphy_hrtimer_work_queue - queue hrtimer work for the wiphy
+ * @wiphy: the wiphy to queue for
+ * @hrwork: the high resolution timer worker
+ * @delay: the delay given as a ktime_t
+ *
+ * Please refer to wiphy_delayed_work_queue(). The difference is that
+ * the hrtimer work uses a high resolution timer for scheduling. This
+ * may be needed if timeouts might be scheduled further in the future
+ * and the accuracy of the normal timer is not sufficient.
+ *
+ * Expect a delay of a few milliseconds as the timer is scheduled
+ * with some slack and some more time may pass between queueing the
+ * work and its start.
+ */
+void wiphy_hrtimer_work_queue(struct wiphy *wiphy,
+			      struct wiphy_hrtimer_work *hrwork,
+			      ktime_t delay);
+
+/**
+ * wiphy_hrtimer_work_cancel - cancel previously queued hrtimer work
+ * @wiphy: the wiphy, for debug purposes
+ * @hrtimer: the hrtimer work to cancel
+ *
+ * Cancel the work *without* waiting for it, this assumes being
+ * called under the wiphy mutex acquired by wiphy_lock().
+ */
+void wiphy_hrtimer_work_cancel(struct wiphy *wiphy,
+			       struct wiphy_hrtimer_work *hrtimer);
+
+/**
+ * wiphy_hrtimer_work_flush - flush previously queued hrtimer work
+ * @wiphy: the wiphy, for debug purposes
+ * @hrwork: the hrtimer work to flush
+ *
+ * Flush the work (i.e. run it if pending). This must be called
+ * under the wiphy mutex acquired by wiphy_lock().
+ */
+void wiphy_hrtimer_work_flush(struct wiphy *wiphy,
+			      struct wiphy_hrtimer_work *hrwork);
+
+/**
+ * wiphy_hrtimer_work_pending - Find out whether a wiphy hrtimer
+ * work item is currently pending.
+ *
+ * @wiphy: the wiphy, for debug purposes
+ * @hrwork: the hrtimer work in question
+ *
+ * Return: true if timer is pending, false otherwise
+ *
+ * Please refer to the wiphy_delayed_work_pending() documentation as
+ * this is the equivalent function for hrtimer based delayed work
+ * items.
+ */
+bool wiphy_hrtimer_work_pending(struct wiphy *wiphy,
+				struct wiphy_hrtimer_work *hrwork);
+
 /**
  * enum ieee80211_ap_reg_power - regulatory power for an Access Point
  *
diff --git a/include/net/libeth/xdp.h b/include/net/libeth/xdp.h
index bc3507edd589..898723ab62e8 100644
--- a/include/net/libeth/xdp.h
+++ b/include/net/libeth/xdp.h
@@ -513,7 +513,7 @@ struct libeth_xdp_tx_desc {
  * can't fail, but can send less frames if there's no enough free descriptors
  * available. The actual free space is returned by @prep from the driver.
  */
-static __always_inline u32
+static __always_inline __nocfi_generic u32
 libeth_xdp_tx_xmit_bulk(const struct libeth_xdp_tx_frame *bulk, void *xdpsq,
 			u32 n, bool unroll, u64 priv,
 			u32 (*prep)(void *xdpsq, struct libeth_xdpsq *sq),
diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h
index ea91aa8afde9..e527b24bd824 100644
--- a/include/uapi/drm/drm_fourcc.h
+++ b/include/uapi/drm/drm_fourcc.h
@@ -979,14 +979,20 @@ extern "C" {
  *               2 = Gob Height 8, Turing+ Page Kind mapping
  *               3 = Reserved for future use.
  *
- * 22:22 s     Sector layout.  On Tegra GPUs prior to Xavier, there is a further
- *             bit remapping step that occurs at an even lower level than the
- *             page kind and block linear swizzles.  This causes the layout of
- *             surfaces mapped in those SOC's GPUs to be incompatible with the
- *             equivalent mapping on other GPUs in the same system.
- *
- *               0 = Tegra K1 - Tegra Parker/TX2 Layout.
- *               1 = Desktop GPU and Tegra Xavier+ Layout
+ * 22:22 s     Sector layout.  There is a further bit remapping step that occurs
+ * 26:27       at an even lower level than the page kind and block linear
+ *             swizzles.  This causes the bit arrangement of surfaces in memory
+ *             to differ subtly, and prevents direct sharing of surfaces between
+ *             GPUs with different layouts.
+ *
+ *               0 = Tegra K1 - Tegra Parker/TX2 Layout
+ *               1 = Pre-GB20x, GB20x 32+ bpp, GB10, Tegra Xavier-Orin Layout
+ *               2 = GB20x(Blackwell 2)+ 8 bpp surface layout
+ *               3 = GB20x(Blackwell 2)+ 16 bpp surface layout
+ *               4 = Reserved for future use.
+ *               5 = Reserved for future use.
+ *               6 = Reserved for future use.
+ *               7 = Reserved for future use.
  *
  * 25:23 c     Lossless Framebuffer Compression type.
  *
@@ -1001,7 +1007,7 @@ extern "C" {
  *               6 = Reserved for future use
  *               7 = Reserved for future use
  *
- * 55:25 -     Reserved for future use.  Must be zero.
+ * 55:28 -     Reserved for future use.  Must be zero.
  */
 #define DRM_FORMAT_MOD_NVIDIA_BLOCK_LINEAR_2D(c, s, g, k, h) \
 	fourcc_mod_code(NVIDIA, (0x10 | \
@@ -1009,6 +1015,7 @@ extern "C" {
 				 (((k) & 0xff) << 12) | \
 				 (((g) & 0x3) << 20) | \
 				 (((s) & 0x1) << 22) | \
+				 (((s) & 0x6) << 25) | \
 				 (((c) & 0x7) << 23)))
 
 /* To grandfather in prior block linear format modifiers to the above layout,
diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
index 4a9fbf42aa9f..9cd89bcc1d9c 100644
--- a/include/uapi/linux/input-event-codes.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -631,6 +631,18 @@
 #define KEY_BRIGHTNESS_MIN		0x250	/* Set Brightness to Minimum */
 #define KEY_BRIGHTNESS_MAX		0x251	/* Set Brightness to Maximum */
 
+/*
+ * Keycodes for hotkeys toggling the electronic privacy screen found on some
+ * laptops on/off. Note when the embedded-controller turns on/off the eprivacy
+ * screen itself then the state should be reported through drm connecter props:
+ * https://www.kernel.org/doc/html/latest/gpu/drm-kms.html#standard-connector-properties
+ * Except when implementing the drm connecter properties API is not possible
+ * because e.g. the firmware does not allow querying the presence and/or status
+ * of the eprivacy screen at boot.
+ */
+#define KEY_EPRIVACY_SCREEN_ON		0x252
+#define KEY_EPRIVACY_SCREEN_OFF		0x253
+
 #define KEY_KBDINPUTASSIST_PREV		0x260
 #define KEY_KBDINPUTASSIST_NEXT		0x261
 #define KEY_KBDINPUTASSIST_PREVGROUP		0x262
diff --git a/include/uapi/linux/io_uring.h b/include/uapi/linux/io_uring.h
index 263bed13473e..b7c8dad26690 100644
--- a/include/uapi/linux/io_uring.h
+++ b/include/uapi/linux/io_uring.h
@@ -689,9 +689,6 @@ enum io_uring_register_op {
 	/* query various aspects of io_uring, see linux/io_uring/query.h */
 	IORING_REGISTER_QUERY			= 35,
 
-	/* return zcrx buffers back into circulation */
-	IORING_REGISTER_ZCRX_REFILL		= 36,
-
 	/* this goes last */
 	IORING_REGISTER_LAST,
 
@@ -1073,15 +1070,6 @@ struct io_uring_zcrx_ifq_reg {
 	__u64	__resv[3];
 };
 
-struct io_uring_zcrx_sync_refill {
-	__u32		zcrx_id;
-	/* the number of entries to return */
-	__u32		nr_entries;
-	/* pointer to an array of struct io_uring_zcrx_rqe */
-	__u64		rqes;
-	__u64		__resv[2];
-};
-
 #ifdef __cplusplus
 }
 #endif
diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
index 8bf27ab8bcb4..1db45b01532b 100644
--- a/include/uapi/linux/virtio_net.h
+++ b/include/uapi/linux/virtio_net.h
@@ -193,7 +193,8 @@ struct virtio_net_hdr_v1 {
 
 struct virtio_net_hdr_v1_hash {
 	struct virtio_net_hdr_v1 hdr;
-	__le32 hash_value;
+	__le16 hash_value_lo;
+	__le16 hash_value_hi;
 #define VIRTIO_NET_HASH_REPORT_NONE            0
 #define VIRTIO_NET_HASH_REPORT_IPv4            1
 #define VIRTIO_NET_HASH_REPORT_TCPv4           2
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
index 9425cfd9d00e..0f95576bf1f6 100644
--- a/include/ufs/ufshcd.h
+++ b/include/ufs/ufshcd.h
@@ -688,6 +688,13 @@ enum ufshcd_quirks {
 	 * single doorbell mode.
 	 */
 	UFSHCD_QUIRK_BROKEN_LSDBS_CAP			= 1 << 25,
+
+	/*
+	 * This quirk indicates that DME_LINKSTARTUP should not be issued a 2nd
+	 * time (refer link_startup_again) after the 1st time was successful,
+	 * because it causes link startup to become unreliable.
+	 */
+	UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE		= 1 << 26,
 };
 
 enum ufshcd_caps {