spi: xilinx: make IRQs optional

Merge series from Abdurrahman Hussain <abdurrahman@nexthop.ai>:

Additionally, make interrupts optional to allow the driver to fall back
to its existing polling mode on systems where interrupts are either missing
or broken.

26 files changed, 223 insertions, 139 deletions

diff --git a/include/drm/bridge/dw_hdmi_qp.h b/include/drm/bridge/dw_hdmi_qp.h
index 3f461f6b9bbf..3af12f82da2c 100644
--- a/include/drm/bridge/dw_hdmi_qp.h
+++ b/include/drm/bridge/dw_hdmi_qp.h
@@ -34,5 +34,6 @@ struct dw_hdmi_qp_plat_data {
 struct dw_hdmi_qp *dw_hdmi_qp_bind(struct platform_device *pdev,
 				   struct drm_encoder *encoder,
 				   const struct dw_hdmi_qp_plat_data *plat_data);
+void dw_hdmi_qp_suspend(struct device *dev, struct dw_hdmi_qp *hdmi);
 void dw_hdmi_qp_resume(struct device *dev, struct dw_hdmi_qp *hdmi);
 #endif /* __DW_HDMI_QP__ */
diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h
index df2f24b950e4..14d2859f0bda 100644
--- a/include/drm/display/drm_dp_helper.h
+++ b/include/drm/display/drm_dp_helper.h
@@ -552,6 +552,22 @@ ssize_t drm_dp_dpcd_write(struct drm_dp_aux *aux, unsigned int offset,
 			  void *buffer, size_t size);
 
 /**
+ * drm_dp_dpcd_readb() - read a single byte from the DPCD
+ * @aux: DisplayPort AUX channel
+ * @offset: address of the register to read
+ * @valuep: location where the value of the register will be stored
+ *
+ * Returns the number of bytes transferred (1) on success, or a negative
+ * error code on failure. In most of the cases you should be using
+ * drm_dp_dpcd_read_byte() instead.
+ */
+static inline ssize_t drm_dp_dpcd_readb(struct drm_dp_aux *aux,
+					unsigned int offset, u8 *valuep)
+{
+	return drm_dp_dpcd_read(aux, offset, valuep, 1);
+}
+
+/**
  * drm_dp_dpcd_read_data() - read a series of bytes from the DPCD
  * @aux: DisplayPort AUX channel (SST or MST)
  * @offset: address of the (first) register to read
@@ -570,12 +586,29 @@ static inline int drm_dp_dpcd_read_data(struct drm_dp_aux *aux,
 					void *buffer, size_t size)
 {
 	int ret;
+	size_t i;
+	u8 *buf = buffer;
 
 	ret = drm_dp_dpcd_read(aux, offset, buffer, size);
-	if (ret < 0)
-		return ret;
-	if (ret < size)
-		return -EPROTO;
+	if (ret >= 0) {
+		if (ret < size)
+			return -EPROTO;
+		return 0;
+	}
+
+	/*
+	 * Workaround for USB-C hubs/adapters with buggy firmware that fail
+	 * multi-byte AUX reads but work with single-byte reads.
+	 * Known affected devices:
+	 * - Lenovo USB-C to VGA adapter (VIA VL817, idVendor=17ef, idProduct=7217)
+	 * - Dell DA310 USB-C hub (idVendor=413c, idProduct=c010)
+	 * Attempt byte-by-byte reading as a fallback.
+	 */
+	for (i = 0; i < size; i++) {
+		ret = drm_dp_dpcd_readb(aux, offset + i, &buf[i]);
+		if (ret < 0)
+			return ret;
+	}
 
 	return 0;
 }
@@ -610,22 +643,6 @@ static inline int drm_dp_dpcd_write_data(struct drm_dp_aux *aux,
 }
 
 /**
- * drm_dp_dpcd_readb() - read a single byte from the DPCD
- * @aux: DisplayPort AUX channel
- * @offset: address of the register to read
- * @valuep: location where the value of the register will be stored
- *
- * Returns the number of bytes transferred (1) on success, or a negative
- * error code on failure. In most of the cases you should be using
- * drm_dp_dpcd_read_byte() instead.
- */
-static inline ssize_t drm_dp_dpcd_readb(struct drm_dp_aux *aux,
-					unsigned int offset, u8 *valuep)
-{
-	return drm_dp_dpcd_read(aux, offset, valuep, 1);
-}
-
-/**
  * drm_dp_dpcd_writeb() - write a single byte to the DPCD
  * @aux: DisplayPort AUX channel
  * @offset: address of the register to write
diff --git a/include/hyperv/hvgdk_mini.h b/include/hyperv/hvgdk_mini.h
index 04b18d0e37af..30fbbde81c5c 100644
--- a/include/hyperv/hvgdk_mini.h
+++ b/include/hyperv/hvgdk_mini.h
@@ -578,9 +578,12 @@ struct hv_tlb_flush {	 /* HV_INPUT_FLUSH_VIRTUAL_ADDRESS_LIST */
 struct hv_tlb_flush_ex {
 	u64 address_space;
 	u64 flags;
-	struct hv_vpset hv_vp_set;
-	u64 gva_list[];
+	__TRAILING_OVERLAP(struct hv_vpset, hv_vp_set, bank_contents, __packed,
+		u64 gva_list[];
+	);
 } __packed;
+static_assert(offsetof(struct hv_tlb_flush_ex, hv_vp_set.bank_contents) ==
+	      offsetof(struct hv_tlb_flush_ex, gva_list));
 
 struct ms_hyperv_tsc_page {	 /* HV_REFERENCE_TSC_PAGE */
 	volatile u32 tsc_sequence;
diff --git a/include/linux/can/can-ml.h b/include/linux/can/can-ml.h
index 8afa92d15a66..1e99fda2b380 100644
--- a/include/linux/can/can-ml.h
+++ b/include/linux/can/can-ml.h
@@ -46,6 +46,12 @@
 #include <linux/list.h>
 #include <linux/netdevice.h>
 
+/* exposed CAN device capabilities for network layer */
+#define CAN_CAP_CC BIT(0) /* CAN CC aka Classical CAN */
+#define CAN_CAP_FD BIT(1) /* CAN FD */
+#define CAN_CAP_XL BIT(2) /* CAN XL */
+#define CAN_CAP_RO BIT(3) /* read-only mode (LISTEN/RESTRICTED) */
+
 #define CAN_SFF_RCV_ARRAY_SZ (1 << CAN_SFF_ID_BITS)
 #define CAN_EFF_RCV_HASH_BITS 10
 #define CAN_EFF_RCV_ARRAY_SZ (1 << CAN_EFF_RCV_HASH_BITS)
@@ -64,6 +70,7 @@ struct can_ml_priv {
 #ifdef CAN_J1939
 	struct j1939_priv *j1939_priv;
 #endif
+	u32 can_cap;
 };
 
 static inline struct can_ml_priv *can_get_ml_priv(struct net_device *dev)
@@ -77,4 +84,21 @@ static inline void can_set_ml_priv(struct net_device *dev,
 	netdev_set_ml_priv(dev, ml_priv, ML_PRIV_CAN);
 }
 
+static inline bool can_cap_enabled(struct net_device *dev, u32 cap)
+{
+	struct can_ml_priv *can_ml = can_get_ml_priv(dev);
+
+	if (!can_ml)
+		return false;
+
+	return (can_ml->can_cap & cap);
+}
+
+static inline void can_set_cap(struct net_device *dev, u32 cap)
+{
+	struct can_ml_priv *can_ml = can_get_ml_priv(dev);
+
+	can_ml->can_cap = cap;
+}
+
 #endif /* CAN_ML_H */
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index f6416a56e95d..6d0710d6f571 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -111,18 +111,12 @@ struct net_device *alloc_candev_mqs(int sizeof_priv, unsigned int echo_skb_max,
 void free_candev(struct net_device *dev);
 
 /* a candev safe wrapper around netdev_priv */
-#if IS_ENABLED(CONFIG_CAN_NETLINK)
 struct can_priv *safe_candev_priv(struct net_device *dev);
-#else
-static inline struct can_priv *safe_candev_priv(struct net_device *dev)
-{
-	return NULL;
-}
-#endif
 
 int open_candev(struct net_device *dev);
 void close_candev(struct net_device *dev);
 void can_set_default_mtu(struct net_device *dev);
+void can_set_cap_info(struct net_device *dev);
 int __must_check can_set_static_ctrlmode(struct net_device *dev,
 					 u32 static_mode);
 int can_hwtstamp_get(struct net_device *netdev,
diff --git a/include/linux/cgroup-defs.h b/include/linux/cgroup-defs.h
index b760a3c470a5..f7cc60de0058 100644
--- a/include/linux/cgroup-defs.h
+++ b/include/linux/cgroup-defs.h
@@ -626,7 +626,13 @@ struct cgroup {
 #endif
 
 	/* All ancestors including self */
-	struct cgroup *ancestors[];
+	union {
+		DECLARE_FLEX_ARRAY(struct cgroup *, ancestors);
+		struct {
+			struct cgroup *_root_ancestor;
+			DECLARE_FLEX_ARRAY(struct cgroup *, _low_ancestors);
+		};
+	};
 };
 
 /*
@@ -647,16 +653,6 @@ struct cgroup_root {
 	struct list_head root_list;
 	struct rcu_head rcu;	/* Must be near the top */
 
-	/*
-	 * The root cgroup. The containing cgroup_root will be destroyed on its
-	 * release. cgrp->ancestors[0] will be used overflowing into the
-	 * following field. cgrp_ancestor_storage must immediately follow.
-	 */
-	struct cgroup cgrp;
-
-	/* must follow cgrp for cgrp->ancestors[0], see above */
-	struct cgroup *cgrp_ancestor_storage;
-
 	/* Number of cgroups in the hierarchy, used only for /proc/cgroups */
 	atomic_t nr_cgrps;
 
@@ -668,6 +664,13 @@ struct cgroup_root {
 
 	/* The name for this hierarchy - may be empty */
 	char name[MAX_CGROUP_ROOT_NAMELEN];
+
+	/*
+	 * The root cgroup. The containing cgroup_root will be destroyed on its
+	 * release. This must be embedded last due to flexible array at the end
+	 * of struct cgroup.
+	 */
+	struct cgroup cgrp;
 };
 
 /*
diff --git a/include/linux/energy_model.h b/include/linux/energy_model.h
index 43aa6153dc57..e7497f804644 100644
--- a/include/linux/energy_model.h
+++ b/include/linux/energy_model.h
@@ -18,7 +18,7 @@
  * @power:	The power consumed at this level (by 1 CPU or by a registered
  *		device). It can be a total power: static and dynamic.
  * @cost:	The cost coefficient associated with this level, used during
- *		energy calculation. Equal to: power * max_frequency / frequency
+ *		energy calculation. Equal to: 10 * power * max_frequency / frequency
  * @flags:	see "em_perf_state flags" description below.
  */
 struct em_perf_state {
diff --git a/include/linux/kfence.h b/include/linux/kfence.h
index 0ad1ddbb8b99..e5822f6e7f27 100644
--- a/include/linux/kfence.h
+++ b/include/linux/kfence.h
@@ -211,6 +211,7 @@ struct kmem_obj_info;
  * __kfence_obj_info() - fill kmem_obj_info struct
  * @kpp: kmem_obj_info to be filled
  * @object: the object
+ * @slab: the slab
  *
  * Return:
  * * false - not a KFENCE object
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index a6624edb7226..8dd79a3f3d66 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -637,6 +637,7 @@ extern int  nfs_update_folio(struct file *file, struct folio *folio,
 extern int nfs_sync_inode(struct inode *inode);
 extern int nfs_wb_all(struct inode *inode);
 extern int nfs_wb_folio(struct inode *inode, struct folio *folio);
+extern int nfs_wb_folio_reclaim(struct inode *inode, struct folio *folio);
 int nfs_wb_folio_cancel(struct inode *inode, struct folio *folio);
 extern int  nfs_commit_inode(struct inode *, int);
 extern struct nfs_commit_data *nfs_commitdata_alloc(void);
diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index cf3c6ab408aa..207156f2143c 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -83,6 +83,7 @@ static inline void reset_hung_task_detector(void) { }
 #if defined(CONFIG_HARDLOCKUP_DETECTOR)
 extern void hardlockup_detector_disable(void);
 extern unsigned int hardlockup_panic;
+extern unsigned long hardlockup_si_mask;
 #else
 static inline void hardlockup_detector_disable(void) {}
 #endif
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 864775651c6f..b5cc0c2b9906 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -2210,6 +2210,10 @@ pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs,
 {
 	return -ENOSPC;
 }
+
+static inline void pci_free_irq_vectors(struct pci_dev *dev)
+{
+}
 #endif /* CONFIG_PCI */
 
 /* Include architecture-dependent settings and functions */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index d395f2810fac..da0133524d08 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1874,7 +1874,6 @@ static inline int task_nice(const struct task_struct *p)
 extern int can_nice(const struct task_struct *p, const int nice);
 extern int task_curr(const struct task_struct *p);
 extern int idle_cpu(int cpu);
-extern int available_idle_cpu(int cpu);
 extern int sched_setscheduler(struct task_struct *, int, const struct sched_param *);
 extern int sched_setscheduler_nocheck(struct task_struct *, int, const struct sched_param *);
 extern void sched_set_fifo(struct task_struct *p);
diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index 0e1d73955fa5..95d0040df584 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -325,6 +325,7 @@ static inline void might_alloc(gfp_t gfp_mask)
 
 /**
  * memalloc_flags_save - Add a PF_* flag to current->flags, save old value
+ * @flags: Flags to add.
  *
  * This allows PF_* flags to be conveniently added, irrespective of current
  * value, and then the old version restored with memalloc_flags_restore().
diff --git a/include/linux/soc/airoha/airoha_offload.h b/include/linux/soc/airoha/airoha_offload.h
index ab64ecdf39a0..d01ef4a6b3d7 100644
--- a/include/linux/soc/airoha/airoha_offload.h
+++ b/include/linux/soc/airoha/airoha_offload.h
@@ -52,8 +52,8 @@ static inline void airoha_ppe_put_dev(struct airoha_ppe_dev *dev)
 {
 }
 
-static inline int airoha_ppe_setup_tc_block_cb(struct airoha_ppe_dev *dev,
-					       void *type_data)
+static inline int airoha_ppe_dev_setup_tc_block_cb(struct airoha_ppe_dev *dev,
+						   void *type_data)
 {
 	return -EOPNOTSUPP;
 }
diff --git a/include/linux/textsearch.h b/include/linux/textsearch.h
index 6673e4d4ac2e..4933777404d6 100644
--- a/include/linux/textsearch.h
+++ b/include/linux/textsearch.h
@@ -35,6 +35,7 @@ struct ts_state
  * @get_pattern: return head of pattern
  * @get_pattern_len: return length of pattern
  * @owner: module reference to algorithm
+ * @list: list to search
  */
 struct ts_ops
 {
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index 59409c1fc3de..2f7bd2fdc616 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -75,4 +75,7 @@
 /* short SET_ADDRESS request timeout */
 #define USB_QUIRK_SHORT_SET_ADDRESS_REQ_TIMEOUT	BIT(16)
 
+/* skip BOS descriptor request */
+#define USB_QUIRK_NO_BOS			BIT(17)
+
 #endif /* __LINUX_USB_QUIRKS_H */
diff --git a/include/net/dropreason-core.h b/include/net/dropreason-core.h
index 58d91ccc56e0..a7b7abd66e21 100644
--- a/include/net/dropreason-core.h
+++ b/include/net/dropreason-core.h
@@ -67,6 +67,7 @@
 	FN(TC_EGRESS)			\
 	FN(SECURITY_HOOK)		\
 	FN(QDISC_DROP)			\
+	FN(QDISC_BURST_DROP)		\
 	FN(QDISC_OVERLIMIT)		\
 	FN(QDISC_CONGESTED)		\
 	FN(CAKE_FLOOD)			\
@@ -375,6 +376,11 @@ enum skb_drop_reason {
 	 */
 	SKB_DROP_REASON_QDISC_DROP,
 	/**
+	 * @SKB_DROP_REASON_QDISC_BURST_DROP: dropped when net.core.qdisc_max_burst
+	 * limit is hit.
+	 */
+	SKB_DROP_REASON_QDISC_BURST_DROP,
+	/**
 	 * @SKB_DROP_REASON_QDISC_OVERLIMIT: dropped by qdisc when a qdisc
 	 * instance exceeds its total buffer size limit.
 	 */
diff --git a/include/net/hotdata.h b/include/net/hotdata.h
index 4acec191c54a..6632b1aa7584 100644
--- a/include/net/hotdata.h
+++ b/include/net/hotdata.h
@@ -42,6 +42,7 @@ struct net_hotdata {
 	int			netdev_budget_usecs;
 	int			tstamp_prequeue;
 	int			max_backlog;
+	int			qdisc_max_burst;
 	int			dev_tx_weight;
 	int			dev_rx_weight;
 	int			sysctl_max_skb_frags;
diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h
index ecae35512b9b..4021e6a73e32 100644
--- a/include/net/ip_tunnels.h
+++ b/include/net/ip_tunnels.h
@@ -19,6 +19,7 @@
 #include <net/rtnetlink.h>
 #include <net/lwtunnel.h>
 #include <net/dst_cache.h>
+#include <net/netdev_lock.h>
 
 #if IS_ENABLED(CONFIG_IPV6)
 #include <net/ipv6.h>
@@ -372,7 +373,17 @@ static inline void ip_tunnel_init_flow(struct flowi4 *fl4,
 	fl4->flowi4_flags = flow_flags;
 }
 
-int ip_tunnel_init(struct net_device *dev);
+int __ip_tunnel_init(struct net_device *dev);
+#define ip_tunnel_init(DEV)			\
+({						\
+	struct net_device *__dev = (DEV);	\
+	int __res = __ip_tunnel_init(__dev);	\
+						\
+	if (!__res)				\
+		netdev_lockdep_set_classes(__dev);\
+	__res;					\
+})
+
 void ip_tunnel_uninit(struct net_device *dev);
 void  ip_tunnel_dellink(struct net_device *dev, struct list_head *head);
 struct net *ip_tunnel_get_link_net(const struct net_device *dev);
diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h
index 1ae08e81339f..15679be90c5c 100644
--- a/include/scsi/scsi_eh.h
+++ b/include/scsi/scsi_eh.h
@@ -41,6 +41,12 @@ struct scsi_eh_save {
 	unsigned char cmnd[32];
 	struct scsi_data_buffer sdb;
 	struct scatterlist sense_sgl;
+
+	/* struct request fields */
+#ifdef CONFIG_BLK_INLINE_ENCRYPTION
+	struct bio_crypt_ctx *rq_crypt_ctx;
+	struct blk_crypto_keyslot *rq_crypt_keyslot;
+#endif
 };
 
 extern void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd,
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index 58fd6e84f961..a7860c047503 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -1402,7 +1402,7 @@ int snd_pcm_lib_mmap_iomem(struct snd_pcm_substream *substream, struct vm_area_s
 #define snd_pcm_lib_mmap_iomem	NULL
 #endif
 
-void snd_pcm_runtime_buffer_set_silence(struct snd_pcm_runtime *runtime);
+int snd_pcm_runtime_buffer_set_silence(struct snd_pcm_runtime *runtime);
 
 /**
  * snd_pcm_limit_isa_dma_size - Get the max size fitting with ISA DMA transfer
diff --git a/include/uapi/linux/dev_energymodel.h b/include/uapi/linux/dev_energymodel.h
new file mode 100644
index 000000000000..355d8885c9a0
--- /dev/null
+++ b/include/uapi/linux/dev_energymodel.h
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
+/* Do not edit directly, auto-generated from: */
+/*	Documentation/netlink/specs/dev-energymodel.yaml */
+/* YNL-GEN uapi header */
+/* To regenerate run: tools/net/ynl/ynl-regen.sh */
+
+#ifndef _UAPI_LINUX_DEV_ENERGYMODEL_H
+#define _UAPI_LINUX_DEV_ENERGYMODEL_H
+
+#define DEV_ENERGYMODEL_FAMILY_NAME	"dev-energymodel"
+#define DEV_ENERGYMODEL_FAMILY_VERSION	1
+
+/**
+ * enum dev_energymodel_perf_state_flags
+ * @DEV_ENERGYMODEL_PERF_STATE_FLAGS_PERF_STATE_INEFFICIENT: The performance
+ *   state is inefficient. There is in this perf-domain, another performance
+ *   state with a higher frequency but a lower or equal power cost.
+ */
+enum dev_energymodel_perf_state_flags {
+	DEV_ENERGYMODEL_PERF_STATE_FLAGS_PERF_STATE_INEFFICIENT = 1,
+};
+
+/**
+ * enum dev_energymodel_perf_domain_flags
+ * @DEV_ENERGYMODEL_PERF_DOMAIN_FLAGS_PERF_DOMAIN_MICROWATTS: The power values
+ *   are in micro-Watts or some other scale.
+ * @DEV_ENERGYMODEL_PERF_DOMAIN_FLAGS_PERF_DOMAIN_SKIP_INEFFICIENCIES: Skip
+ *   inefficient states when estimating energy consumption.
+ * @DEV_ENERGYMODEL_PERF_DOMAIN_FLAGS_PERF_DOMAIN_ARTIFICIAL: The power values
+ *   are artificial and might be created by platform missing real power
+ *   information.
+ */
+enum dev_energymodel_perf_domain_flags {
+	DEV_ENERGYMODEL_PERF_DOMAIN_FLAGS_PERF_DOMAIN_MICROWATTS = 1,
+	DEV_ENERGYMODEL_PERF_DOMAIN_FLAGS_PERF_DOMAIN_SKIP_INEFFICIENCIES = 2,
+	DEV_ENERGYMODEL_PERF_DOMAIN_FLAGS_PERF_DOMAIN_ARTIFICIAL = 4,
+};
+
+enum {
+	DEV_ENERGYMODEL_A_PERF_DOMAIN_PAD = 1,
+	DEV_ENERGYMODEL_A_PERF_DOMAIN_PERF_DOMAIN_ID,
+	DEV_ENERGYMODEL_A_PERF_DOMAIN_FLAGS,
+	DEV_ENERGYMODEL_A_PERF_DOMAIN_CPUS,
+
+	__DEV_ENERGYMODEL_A_PERF_DOMAIN_MAX,
+	DEV_ENERGYMODEL_A_PERF_DOMAIN_MAX = (__DEV_ENERGYMODEL_A_PERF_DOMAIN_MAX - 1)
+};
+
+enum {
+	DEV_ENERGYMODEL_A_PERF_TABLE_PERF_DOMAIN_ID = 1,
+	DEV_ENERGYMODEL_A_PERF_TABLE_PERF_STATE,
+
+	__DEV_ENERGYMODEL_A_PERF_TABLE_MAX,
+	DEV_ENERGYMODEL_A_PERF_TABLE_MAX = (__DEV_ENERGYMODEL_A_PERF_TABLE_MAX - 1)
+};
+
+enum {
+	DEV_ENERGYMODEL_A_PERF_STATE_PAD = 1,
+	DEV_ENERGYMODEL_A_PERF_STATE_PERFORMANCE,
+	DEV_ENERGYMODEL_A_PERF_STATE_FREQUENCY,
+	DEV_ENERGYMODEL_A_PERF_STATE_POWER,
+	DEV_ENERGYMODEL_A_PERF_STATE_COST,
+	DEV_ENERGYMODEL_A_PERF_STATE_FLAGS,
+
+	__DEV_ENERGYMODEL_A_PERF_STATE_MAX,
+	DEV_ENERGYMODEL_A_PERF_STATE_MAX = (__DEV_ENERGYMODEL_A_PERF_STATE_MAX - 1)
+};
+
+enum {
+	DEV_ENERGYMODEL_CMD_GET_PERF_DOMAINS = 1,
+	DEV_ENERGYMODEL_CMD_GET_PERF_TABLE,
+	DEV_ENERGYMODEL_CMD_PERF_DOMAIN_CREATED,
+	DEV_ENERGYMODEL_CMD_PERF_DOMAIN_UPDATED,
+	DEV_ENERGYMODEL_CMD_PERF_DOMAIN_DELETED,
+
+	__DEV_ENERGYMODEL_CMD_MAX,
+	DEV_ENERGYMODEL_CMD_MAX = (__DEV_ENERGYMODEL_CMD_MAX - 1)
+};
+
+#define DEV_ENERGYMODEL_MCGRP_EVENT	"event"
+
+#endif /* _UAPI_LINUX_DEV_ENERGYMODEL_H */
diff --git a/include/uapi/linux/energy_model.h b/include/uapi/linux/energy_model.h
deleted file mode 100644
index 0bcad967854f..000000000000
--- a/include/uapi/linux/energy_model.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
-/* Do not edit directly, auto-generated from: */
-/*	Documentation/netlink/specs/em.yaml */
-/* YNL-GEN uapi header */
-/* To regenerate run: tools/net/ynl/ynl-regen.sh */
-
-#ifndef _UAPI_LINUX_ENERGY_MODEL_H
-#define _UAPI_LINUX_ENERGY_MODEL_H
-
-#define EM_FAMILY_NAME		"em"
-#define EM_FAMILY_VERSION	1
-
-enum {
-	EM_A_PDS_PD = 1,
-
-	__EM_A_PDS_MAX,
-	EM_A_PDS_MAX = (__EM_A_PDS_MAX - 1)
-};
-
-enum {
-	EM_A_PD_PAD = 1,
-	EM_A_PD_PD_ID,
-	EM_A_PD_FLAGS,
-	EM_A_PD_CPUS,
-
-	__EM_A_PD_MAX,
-	EM_A_PD_MAX = (__EM_A_PD_MAX - 1)
-};
-
-enum {
-	EM_A_PD_TABLE_PD_ID = 1,
-	EM_A_PD_TABLE_PS,
-
-	__EM_A_PD_TABLE_MAX,
-	EM_A_PD_TABLE_MAX = (__EM_A_PD_TABLE_MAX - 1)
-};
-
-enum {
-	EM_A_PS_PAD = 1,
-	EM_A_PS_PERFORMANCE,
-	EM_A_PS_FREQUENCY,
-	EM_A_PS_POWER,
-	EM_A_PS_COST,
-	EM_A_PS_FLAGS,
-
-	__EM_A_PS_MAX,
-	EM_A_PS_MAX = (__EM_A_PS_MAX - 1)
-};
-
-enum {
-	EM_CMD_GET_PDS = 1,
-	EM_CMD_GET_PD_TABLE,
-	EM_CMD_PD_CREATED,
-	EM_CMD_PD_UPDATED,
-	EM_CMD_PD_DELETED,
-
-	__EM_CMD_MAX,
-	EM_CMD_MAX = (__EM_CMD_MAX - 1)
-};
-
-#define EM_MCGRP_EVENT	"event"
-
-#endif /* _UAPI_LINUX_ENERGY_MODEL_H */
diff --git a/include/uapi/linux/ext4.h b/include/uapi/linux/ext4.h
index 411dcc1e4a35..9c683991c32f 100644
--- a/include/uapi/linux/ext4.h
+++ b/include/uapi/linux/ext4.h
@@ -139,7 +139,7 @@ struct ext4_tune_sb_params {
 	__u32 clear_feature_incompat_mask;
 	__u32 clear_feature_ro_compat_mask;
 	__u8  mount_opts[64];
-	__u8  pad[64];
+	__u8  pad[68];
 };
 
 #define EXT4_TUNE_FL_ERRORS_BEHAVIOR	0x00000001
diff --git a/include/uapi/linux/landlock.h b/include/uapi/linux/landlock.h
index f030adc462ee..75fd7f5e6cc3 100644
--- a/include/uapi/linux/landlock.h
+++ b/include/uapi/linux/landlock.h
@@ -216,6 +216,23 @@ struct landlock_net_port_attr {
  *   :manpage:`ftruncate(2)`, :manpage:`creat(2)`, or :manpage:`open(2)` with
  *   ``O_TRUNC``.  This access right is available since the third version of the
  *   Landlock ABI.
+ * - %LANDLOCK_ACCESS_FS_IOCTL_DEV: Invoke :manpage:`ioctl(2)` commands on an opened
+ *   character or block device.
+ *
+ *   This access right applies to all `ioctl(2)` commands implemented by device
+ *   drivers.  However, the following common IOCTL commands continue to be
+ *   invokable independent of the %LANDLOCK_ACCESS_FS_IOCTL_DEV right:
+ *
+ *   * IOCTL commands targeting file descriptors (``FIOCLEX``, ``FIONCLEX``),
+ *   * IOCTL commands targeting file descriptions (``FIONBIO``, ``FIOASYNC``),
+ *   * IOCTL commands targeting file systems (``FIFREEZE``, ``FITHAW``,
+ *     ``FIGETBSZ``, ``FS_IOC_GETFSUUID``, ``FS_IOC_GETFSSYSFSPATH``)
+ *   * Some IOCTL commands which do not make sense when used with devices, but
+ *     whose implementations are safe and return the right error codes
+ *     (``FS_IOC_FIEMAP``, ``FICLONE``, ``FICLONERANGE``, ``FIDEDUPERANGE``)
+ *
+ *   This access right is available since the fifth version of the Landlock
+ *   ABI.
  *
  * Whether an opened file can be truncated with :manpage:`ftruncate(2)` or used
  * with `ioctl(2)` is determined during :manpage:`open(2)`, in the same way as
@@ -275,26 +292,6 @@ struct landlock_net_port_attr {
  *   If multiple requirements are not met, the ``EACCES`` error code takes
  *   precedence over ``EXDEV``.
  *
- * The following access right applies both to files and directories:
- *
- * - %LANDLOCK_ACCESS_FS_IOCTL_DEV: Invoke :manpage:`ioctl(2)` commands on an opened
- *   character or block device.
- *
- *   This access right applies to all `ioctl(2)` commands implemented by device
- *   drivers.  However, the following common IOCTL commands continue to be
- *   invokable independent of the %LANDLOCK_ACCESS_FS_IOCTL_DEV right:
- *
- *   * IOCTL commands targeting file descriptors (``FIOCLEX``, ``FIONCLEX``),
- *   * IOCTL commands targeting file descriptions (``FIONBIO``, ``FIOASYNC``),
- *   * IOCTL commands targeting file systems (``FIFREEZE``, ``FITHAW``,
- *     ``FIGETBSZ``, ``FS_IOC_GETFSUUID``, ``FS_IOC_GETFSSYSFSPATH``)
- *   * Some IOCTL commands which do not make sense when used with devices, but
- *     whose implementations are safe and return the right error codes
- *     (``FS_IOC_FIEMAP``, ``FICLONE``, ``FICLONERANGE``, ``FIDEDUPERANGE``)
- *
- *   This access right is available since the fifth version of the Landlock
- *   ABI.
- *
  * .. warning::
  *
  *   It is currently not possible to restrict some file-related actions
diff --git a/include/uapi/linux/media/arm/mali-c55-config.h b/include/uapi/linux/media/arm/mali-c55-config.h
index 109082c5694f..3d335f950eeb 100644
--- a/include/uapi/linux/media/arm/mali-c55-config.h
+++ b/include/uapi/linux/media/arm/mali-c55-config.h
@@ -195,15 +195,6 @@ struct mali_c55_stats_buffer {
 } __attribute__((packed));
 
 /**
- * enum mali_c55_param_buffer_version - Mali-C55 parameters block versioning
- *
- * @MALI_C55_PARAM_BUFFER_V1: First version of Mali-C55 parameters block
- */
-enum mali_c55_param_buffer_version {
-	MALI_C55_PARAM_BUFFER_V1,
-};
-
-/**
  * enum mali_c55_param_block_type - Enumeration of Mali-C55 parameter blocks
  *
  * This enumeration defines the types of Mali-C55 parameters block. Each block