Merge branch 'memory-hotplug'

Sumanth Korikkar says:

====================

Provide a new interface for dynamic configuration and
deconfiguration of hotplug memory on s390, allowing with/without
memmap_on_memory support. It is a follow up on the discussion with David
when introducing memmap_on_memory support for s390 and support dynamic
(de)configuration of memory:
https://lore.kernel.org/all/ee492da8-74b4-4a97-8b24-73e07257f01d@redhat.com/
https://lore.kernel.org/all/20241202082732.3959803-1-sumanthk@linux.ibm.com/

The original motivation for introducing memmap_on_memory on s390 was to
avoid using online memory to store struct pages metadata, particularly
for standby memory blocks. This became critical in cases where there was
an imbalance between standby and online memory, potentially leading to
boot failures due to insufficient memory for metadata allocation.

To address this, memmap_on_memory was utilized on s390. However, in its
current form, it adds struct pages metadata at the start of each memory
block at the time of addition (only standby memory), and this
configuration is static. It cannot be changed at runtime  (When the user
needs continuous physical memory).

Inorder to provide more flexibility to the user and overcome the above
limitation, add an option to dynamically configure and deconfigure
hotpluggable memory block with/without memmap_on_memory.

With the new interface, s390 will not add all possible hotplug memory in
advance, like before, to make it visible in sysfs for online/offline
actions. Instead, before memory block can be set online, it has to be
configured via a new interface in /sys/firmware/memory/memoryX/config,
which makes s390 similar to others.  i.e. Adding of hotpluggable memory is
controlled by the user instead of adding it at boottime.

s390 kernel sysfs interface to configure/deconfigure memory with
memmap_on_memory (with upcoming lsmem changes):

* Initial memory layout:
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE                 SIZE   STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x7fffffff   2G  online 0-15  yes        no
0x80000000-0xffffffff   2G offline 16-31 no         yes

* Configure memory
echo 1 > /sys/firmware/memory/memory16/config
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE                  SIZE  STATE   BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x7fffffff    2G  online  0-15  yes        no
0x80000000-0x87ffffff  128M offline    16  yes        yes
0x88000000-0xffffffff  1.9G offline 17-31  no         yes

* Deconfigure memory
echo 0 > /sys/firmware/memory/memory16/config
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE                 SIZE   STATE BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x7fffffff   2G  online 0-15  yes        no
0x80000000-0xffffffff   2G offline 16-31 no         yes

* Enable memmap_on_memory and online it.
(Deconfigure first)
echo 0 > /sys/devices/system/memory/memory5/online
echo 0 > /sys/firmware/memory/memory5/config

lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE                  SIZE  STATE  BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x27ffffff  640M  online 0-4   yes        no
0x28000000-0x2fffffff  128M offline 5     no         no
0x30000000-0x7fffffff  1.3G  online 6-15  yes        no
0x80000000-0xffffffff    2G offline 16-31 no         yes

(Enable memmap_on_memory and online it)
echo 1 > /sys/firmware/memory/memory5/memmap_on_memory
echo 1 > /sys/firmware/memory/memory5/config
echo 1 > /sys/devices/system/memory/memory5/online

lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE                  SIZE  STATE   BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x27ffffff  640M  online  0-4   yes        no
0x28000000-0x2fffffff  128M  online  5     yes        yes
0x30000000-0x7fffffff  1.3G  online  6-15  yes        no
0x80000000-0xffffffff    2G  offline 16-31 no         yes

* Disable memmap_on_memory and online it.
(Deconfigure first)
echo 0 > /sys/devices/system/memory/memory5/online
echo 0 > /sys/firmware/memory/memory5/config

lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE                  SIZE  STATE  BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x27ffffff  640M  online 0-4   yes        no
0x28000000-0x2fffffff  128M offline 5     no         yes
0x30000000-0x7fffffff  1.3G  online 6-15  yes        no
0x80000000-0xffffffff    2G offline 16-31 no         yes

(Disable memmap_on_memory and online it)
echo 0 > /sys/firmware/memory/memory5/memmap_on_memory
echo 1 > /sys/firmware/memory/memory5/config
echo 1 > /sys/devices/system/memory/memory5/online

lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED,MEMMAP_ON_MEMORY
RANGE                  SIZE  STATE   BLOCK CONFIGURED MEMMAP_ON_MEMORY
0x00000000-0x7fffffff  2G    online  0-15  yes        no
0x80000000-0xffffffff  2G    offline 16-31 no         yes

* Userspace changes:
lsmem/chmem tool is also changed to use the new interface. I will send
it to util-linux soon.

Patch 1 adds support for removal of boot-allocated memory blocks.

Patch 2 provides option to dynamically configure and deconfigure memory
with/without memmap_on_memory.

Patch 3 removes MHP_OFFLINE_INACCESSIBLE from s390. The mhp flag was
used to mark memory as not accessible until memory hotplug online phase
begins.  However, with patch 2, it is no longer essential. Memory can be
brought to accessible state before adding memory, as the memory is added
during runttime now instead of boottime.

Patch 4 removes the MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE notifiers. It
is no longer needed.  Memory can be brought to accessible state before
adding memory now, with runtime (de)configuration of memory.

Note: The patches apply to the linux-next branch.

v3:
Thanks David
* Avoid goto label in create_standby_sclp_mems().
* Use unsigned long instead of u64.
* Add Acked-by.

v2:
Thanks David
* Rename struct mblock/mblock_arg with struct sclp_mem/sclp_mem_arg.
* Rename all mblocks/mblock references with sclp_mems/sclp_mem -
  structures, functions.
* Rename create_online_mblock() with create_configured_sclp_mem().
* Rename config_mblock_show()/config_mblock_store() with
  config_sclp_mem_show()/config_sclp_mem_store().
* Remove contains_standby_increment() and
  sclp_mem_notifier. sclp mem state change is performed when
  adding/removing memory. sclp memory notifier - no longer needed with
  this patchset.
* Recover sclp mem state when add_memory() fails.
* Refactor and add function init_sclp_mem().
* Use unsigned long instead of unsigned long long.
* Simplify and correct kobj handling. Thanks Heiko.

====================

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

3 files changed, 1 insertions, 27 deletions

diff --git a/include/linux/memory.h b/include/linux/memory.h
index 0c214256216f..ba1515160894 100644
--- a/include/linux/memory.h
+++ b/include/linux/memory.h
@@ -96,17 +96,8 @@ int set_memory_block_size_order(unsigned int order);
 #define	MEM_GOING_ONLINE	(1<<3)
 #define	MEM_CANCEL_ONLINE	(1<<4)
 #define	MEM_CANCEL_OFFLINE	(1<<5)
-#define	MEM_PREPARE_ONLINE	(1<<6)
-#define	MEM_FINISH_OFFLINE	(1<<7)
 
 struct memory_notify {
-	/*
-	 * The altmap_start_pfn and altmap_nr_pages fields are designated for
-	 * specifying the altmap range and are exclusively intended for use in
-	 * MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE notifiers.
-	 */
-	unsigned long altmap_start_pfn;
-	unsigned long altmap_nr_pages;
 	unsigned long start_pfn;
 	unsigned long nr_pages;
 };
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index 23f038a16231..f2f16cdd73ee 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -58,22 +58,6 @@ typedef int __bitwise mhp_t;
  * implies the node id (nid).
  */
 #define MHP_NID_IS_MGID		((__force mhp_t)BIT(2))
-/*
- * The hotplugged memory is completely inaccessible while the memory is
- * offline. The memory provider will handle MEM_PREPARE_ONLINE /
- * MEM_FINISH_OFFLINE notifications and make the memory accessible.
- *
- * This flag is only relevant when used along with MHP_MEMMAP_ON_MEMORY,
- * because the altmap cannot be written (e.g., poisoned) when adding
- * memory -- before it is set online.
- *
- * This allows for adding memory with an altmap that is not currently
- * made available by a hypervisor. When onlining that memory, the
- * hypervisor can be instructed to make that memory available, and
- * the onlining phase will not require any memory allocations, which is
- * helpful in low-memory situations.
- */
-#define MHP_OFFLINE_INACCESSIBLE	((__force mhp_t)BIT(3))
 
 /*
  * Extended parameters for memory hotplug:
@@ -123,7 +107,7 @@ extern void adjust_present_page_count(struct page *page,
 				      long nr_pages);
 /* VM interface that may be used by firmware interface */
 extern int mhp_init_memmap_on_memory(unsigned long pfn, unsigned long nr_pages,
-				     struct zone *zone, bool mhp_off_inaccessible);
+				     struct zone *zone);
 extern void mhp_deinit_memmap_on_memory(unsigned long pfn, unsigned long nr_pages);
 extern int online_pages(unsigned long pfn, unsigned long nr_pages,
 			struct zone *zone, struct memory_group *group);
diff --git a/include/linux/memremap.h b/include/linux/memremap.h
index e5951ba12a28..30c7aecbd245 100644
--- a/include/linux/memremap.h
+++ b/include/linux/memremap.h
@@ -25,7 +25,6 @@ struct vmem_altmap {
 	unsigned long free;
 	unsigned long align;
 	unsigned long alloc;
-	bool inaccessible;
 };
 
 /*