PCI: dwc: Set DMA_BYPASS bit in outbound IATU CTRL2 register

An outbound iATU region matches any local (AXI/application-side)
address that falls within its Base/Limit window and rewrites it to
the PCIe-side address programmed in that region's Target Address
Registers before the transaction goes out on the link. This matching
does not distinguish CPU-initiated transactions from ones issued by
the internal DMA engine (eDMA/HDMA).

Example: outbound region 0 is programmed with Base/Limit covering
local addresses 0x8000_0000-0x8000_0FFF and Target 0x1_0000_0000, for
CPU-initiated accesses. The DMA engine is later given a descriptor
whose destination is the host address 0x8000_0080, which happens to
fall inside region 0's Base/Limit range. The iATU matches the DMA
transaction against region 0 too and rewrites it to 0x1_0000_0080
instead of passing 0x8000_0080 through unchanged. The transaction
then lands on the wrong host address, causing data corruption or an
IOMMU fault when the rewritten address has no valid mapping.

Set the DMA_BYPASS bit (bit 27) in PCIE_ATU_REGION_CTRL2 when
programming outbound iATU regions so only CPU/AXI-initiated
transactions are matched against the region; DMA engine transactions
bypass the translation and go out on the PCIe link with their
original address.

Signed-off-by: Sumit Kumar <sumit.kumar@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260908-dma_bypass-v2-1-c3c81d408c0c@oss.qualcomm.com

0 files changed, 0 insertions, 0 deletions