summaryrefslogtreecommitdiff
path: root/scripts/objdiff
diff options
context:
space:
mode:
authorMark Brown <broonie@kernel.org>2026-11-11 02:19:29 +0000
committerMark Brown <broonie@kernel.org>2026-11-11 02:19:29 +0000
commite92fb7ab0e383b96e3fd8cc740e89661a27eccf5 (patch)
treed1f17c0714ab0ccc9e8921a62bcfd49f00379f3c /scripts/objdiff
parentd9bcb20e403908415809c37b96db4c9d651298cc (diff)
parent53094890a8215e676b817570cdb6f1d9caefd4f5 (diff)
ASoC: amd: SoundWire audio for LG gram 16Z95U (rt713 + rt1320), speaker still silent
Jaehoon Kim <jaehoon1744@dankook.ac.kr> says: The 2026 LG gram 16 with AMD Ryzen AI 400 (16Z95U, ACP rev 0x72, PCI SSID 1854:056c) has no internal audio on mainline: no sound card is created. The same generation 15Z95U has been reported with identical symptoms (https://github.com/CachyOS/distribution/issues/516). These two patches create the card. With them, headphone playback and internal microphone capture work. Speaker playback through the RT1320 is still silent, and I would appreciate advice on that part (details below). I am sending the series as RFC for that reason. Changes in v2: - Rebased onto broonie/sound for-next; v1 was against v7.2.14 and did not apply. No functional change. - Patch 2: use a dedicated rt713 jack + DMIC endpoint array; the new jack_dmic_endpoints maps the DMIC to endpoint #2 (rt721), whereas the rt713 SmartMic DAI is endpoint #1. - Cover letter: added what the Windows driver loads for the RT1320. Hardware, from the ACPI tables (ACP node \_SB.PCI0.GPPA.ACP): acp-audio-config-flag = 0x10 (FLAG_AMD_LEGACY_ONLY_DMIC) SDWC (_ADR 5): mipi-sdw-manager-list = 0x3 link 0: SW36 _ADR 0x000030025D071301 RT713 SDCA functions: UAJ (type 6) at 0x1, SmartMic (type 3) at 0x2 link 1: SW23 _ADR 0x000131025D132001 RT1320 SDCA function: SmartAmp (type 1) at 0x4 Patch 1 adds the machine to acp70_acpi_flag_override_table. Without it snd_pci_ps returns -ENODEV because of the BIOS flag, snd_acp_pci binds and reports "No matching ASoC machine driver found". Patch 2 adds rt713 (link 0) + rt1320 (link 1, unique ID 1) entries to snd_soc_acpi_amd_acp70_sdw_machines[]. Result with both patches (tested on 7.2.14, Arch Linux, alsa-ucm-conf 1.2.16.1): card: amd-soundwire, components " cfg-amp:1 hs:rt713-sdca mic:rt713 spk:rt1320" SDW0-PIN0-PLAYBACK-SimpleJack rt712-sdca-aif1 works SDW0-PIN3-CAPTURE-SimpleJack rt712-sdca-aif1 not tested SDW0-PIN5-CAPTURE-SmartMic rt712-sdca-aif3 works SDW1-PIN1-PLAYBACK-SmartAmp rt1320-aif1 silent Open problem: RT1320 speaker output is silent The playback stream starts and runs without any error: rt1320-sdca sdw:0:1:025d:1320:01: rt1320_io_init amp func_status=0x41 rt1320-sdca sdw:0:1:025d:1320:01: rt1320_vc_preset, RT1320_KR0_INT_READY=0x1f rt1320-sdca sdw:0:1:025d:1320:01: rt1320_io_init version_id=2, dev_id=0x6981 rt1320-sdca sdw:0:1:025d:1320:01: rt1320_io_init hw_init complete ... soundwire sdw-master-0-1: Port=1 hstart=1 hstop=9 port_bo=65 slots=32 max_ports=6 rt1320-sdca sdw:0:1:025d:1320:01: rt1320_sdw_hw_params rt1320-aif1 What I checked: - Mixer: "Speaker Switch" on, "rt1320-1 OT23 L/R Switch" on, "rt1320-1 FU21 Playback Volume" 87 (0 dB), "RX Channel Select" L,R. - Direct ALSA playback (speaker-test -D plughw:amdsoundwire,2) and playback through PipeWire both run to completion with no sound. - Runtime PM: forcing power/control=on for the RT1320, so io_init runs only once at boot, does not change the result. - rt1320-patch-code-vc.bin is installed and loads without error. - No DSP firmware is loaded: there is no "realtek,dspfw-name" property, and linux-firmware has no realtek/rt1320/rt1320_<vendor>_<product>_<sku>.dat or rt1320_RAE_<vendor>_<product>_<sku>.dat for this machine. On Windows, Realtek's SDCA XU extension driver (RtkSdcaXuLG.inf, 10.0.297.1) binds to this amplifier: SOUNDWIRE\SDCA_10&MAN_025D&FUNC_1320&TYPE_01&VER_01&ADR_04&LID_01&UID_01&SUBSYS_056C1854 It ships RTKDAT_1854.dat and RTKDAT_GENERAL.dat and references per-SSID ALC1320 DSP firmware / preset files (ALC1320\FWFiles.txt, FWFiles_LG_1854_*.txt, alc1320fw_preset_*\alc1320_afx1_*.dat.bin, RAE_XU). So on Windows a DSP firmware and RAE preset are loaded for this amplifier, while on Linux none is. In addition, the ACPI SmartAmp function carries a 5627-entry "mipi-sdca-function-initialization-table" that differs from rt1320_vc_blind_write[] in a number of registers (full list was attached to v1), for example: register ACPI driver 0xc900 0xd0 0x73 0xc901 0x09 0x04 0xd471 0xba 0x3a 0xd479 0x40 0x20 0xdb08 0xe7 0x7a Questions: 1. Shuming: is the missing DSP firmware / RAE preset the reason the amplifier stays silent on this design? If so, could Realtek provide RT1320 DSP and RAE files for the LG gram 16Z95U (SSID 1854:056c) to linux-firmware? I can test them. 2. Vijendar: is SDW1 / ACP70_SW_AUDIO1_TX the right pin for an amplifier on link 1 with ACP rev 0x72, as used by the existing rt722 (link 0) + rt1320 (link 1) entry? I can provide the full acpidump, dmesg and alsa-info output. Disclosure: the analysis and both patches were prepared with the help of an AI assistant (Claude); I built and tested them on the hardware. Link: https://patch.msgid.link/20261111013953.4011-1-jaehoon1744@gmail.com
Diffstat (limited to 'scripts/objdiff')
0 files changed, 0 insertions, 0 deletions