Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.

   2) Add fib_sync_mem to control the amount of dirty memory we allow to
      queue up between synchronize RCU calls, from David Ahern.

   3) Make flow classifier more lockless, from Vlad Buslov.

   4) Add PHY downshift support to aquantia driver, from Heiner
      Kallweit.

   5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
      contention on SLAB spinlocks in heavy RPC workloads.

   6) Partial GSO offload support in XFRM, from Boris Pismenny.

   7) Add fast link down support to ethtool, from Heiner Kallweit.

   8) Use siphash for IP ID generator, from Eric Dumazet.

   9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
      entries, from David Ahern.

  10) Move skb->xmit_more into a per-cpu variable, from Florian
      Westphal.

  11) Improve eBPF verifier speed and increase maximum program size,
      from Alexei Starovoitov.

  12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
      spinlocks. From Neil Brown.

  13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.

  14) Improve link partner cap detection in generic PHY code, from
      Heiner Kallweit.

  15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
      Maguire.

  16) Remove SKB list implementation assumptions in SCTP, your's truly.

  17) Various cleanups, optimizations, and simplifications in r8169
      driver. From Heiner Kallweit.

  18) Add memory accounting on TX and RX path of SCTP, from Xin Long.

  19) Switch PHY drivers over to use dynamic featue detection, from
      Heiner Kallweit.

  20) Support flow steering without masking in dpaa2-eth, from Ioana
      Ciocoi.

  21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
      Pirko.

  22) Increase the strict parsing of current and future netlink
      attributes, also export such policies to userspace. From Johannes
      Berg.

  23) Allow DSA tag drivers to be modular, from Andrew Lunn.

  24) Remove legacy DSA probing support, also from Andrew Lunn.

  25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
      Haabendal.

  26) Add a generic tracepoint for TX queue timeouts to ease debugging,
      from Cong Wang.

  27) More indirect call optimizations, from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
  cxgb4: Fix error path in cxgb4_init_module
  net: phy: improve pause mode reporting in phy_print_status
  dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
  net: macb: Change interrupt and napi enable order in open
  net: ll_temac: Improve error message on error IRQ
  net/sched: remove block pointer from common offload structure
  net: ethernet: support of_get_mac_address new ERR_PTR error
  net: usb: smsc: fix warning reported by kbuild test robot
  staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
  net: dsa: support of_get_mac_address new ERR_PTR error
  net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
  vrf: sit mtu should not be updated when vrf netdev is the link
  net: dsa: Fix error cleanup path in dsa_init_module
  l2tp: Fix possible NULL pointer dereference
  taprio: add null check on sched_nest to avoid potential null pointer dereference
  net: mvpp2: cls: fix less than zero check on a u32 variable
  net_sched: sch_fq: handle non connected flows
  net_sched: sch_fq: do not assume EDT packets are ordered
  net: hns3: use devm_kcalloc when allocating desc_cb
  net: hns3: some cleanup for struct hns3_enet_ring
  ...

8 files changed, 257 insertions, 18 deletions

diff --git a/tools/bpf/bpftool/Documentation/bpftool-btf.rst b/tools/bpf/bpftool/Documentation/bpftool-btf.rst
new file mode 100644
index 000000000000..2dbc1413fabd
--- /dev/null
+++ b/tools/bpf/bpftool/Documentation/bpftool-btf.rst
@@ -0,0 +1,222 @@
+================
+bpftool-btf
+================
+-------------------------------------------------------------------------------
+tool for inspection of BTF data
+-------------------------------------------------------------------------------
+
+:Manual section: 8
+
+SYNOPSIS
+========
+
+	**bpftool** [*OPTIONS*] **btf** *COMMAND*
+
+	*OPTIONS* := { { **-j** | **--json** } [{ **-p** | **--pretty** }] }
+
+	*COMMANDS* := { **dump** | **help** }
+
+BTF COMMANDS
+=============
+
+|	**bpftool** **btf dump** *BTF_SRC*
+|	**bpftool** **btf help**
+|
+|	*BTF_SRC* := { **id** *BTF_ID* | **prog** *PROG* | **map** *MAP* [{**key** | **value** | **kv** | **all**}] | **file** *FILE* }
+|	*MAP* := { **id** *MAP_ID* | **pinned** *FILE* }
+|	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* }
+
+DESCRIPTION
+===========
+	**bpftool btf dump** *BTF_SRC*
+		  Dump BTF entries from a given *BTF_SRC*.
+
+                  When **id** is specified, BTF object with that ID will be
+                  loaded and all its BTF types emitted.
+
+                  When **map** is provided, it's expected that map has
+                  associated BTF object with BTF types describing key and
+                  value. It's possible to select whether to dump only BTF
+                  type(s) associated with key (**key**), value (**value**),
+                  both key and value (**kv**), or all BTF types present in
+                  associated BTF object (**all**). If not specified, **kv**
+                  is assumed.
+
+                  When **prog** is provided, it's expected that program has
+                  associated BTF object with BTF types.
+
+                  When specifying *FILE*, an ELF file is expected, containing
+                  .BTF section with well-defined BTF binary format data,
+                  typically produced by clang or pahole.
+
+	**bpftool btf help**
+		  Print short help message.
+
+OPTIONS
+=======
+	-h, --help
+		  Print short generic help message (similar to **bpftool help**).
+
+	-V, --version
+		  Print version number (similar to **bpftool version**).
+
+	-j, --json
+		  Generate JSON output. For commands that cannot produce JSON, this
+		  option has no effect.
+
+	-p, --pretty
+		  Generate human-readable JSON output. Implies **-j**.
+
+EXAMPLES
+========
+**# bpftool btf dump id 1226**
+::
+
+  [1] PTR '(anon)' type_id=2
+  [2] STRUCT 'dummy_tracepoint_args' size=16 vlen=2
+          'pad' type_id=3 bits_offset=0
+          'sock' type_id=4 bits_offset=64
+  [3] INT 'long long unsigned int' size=8 bits_offset=0 nr_bits=64 encoding=(none)
+  [4] PTR '(anon)' type_id=5
+  [5] FWD 'sock' fwd_kind=union
+
+This gives an example of default output for all supported BTF kinds.
+
+**$ cat prog.c**
+::
+
+  struct fwd_struct;
+
+  enum my_enum {
+          VAL1 = 3,
+          VAL2 = 7,
+  };
+
+  typedef struct my_struct my_struct_t;
+
+  struct my_struct {
+          const unsigned int const_int_field;
+          int bitfield_field: 4;
+          char arr_field[16];
+          const struct fwd_struct *restrict fwd_field;
+          enum my_enum enum_field;
+          volatile my_struct_t *typedef_ptr_field;
+  };
+
+  union my_union {
+          int a;
+          struct my_struct b;
+  };
+
+  struct my_struct struct_global_var __attribute__((section("data_sec"))) = {
+          .bitfield_field = 3,
+          .enum_field = VAL1,
+  };
+  int global_var __attribute__((section("data_sec"))) = 7;
+
+  __attribute__((noinline))
+  int my_func(union my_union *arg1, int arg2)
+  {
+          static int static_var __attribute__((section("data_sec"))) = 123;
+          static_var++;
+          return static_var;
+  }
+
+**$ bpftool btf dump file prog.o**
+::
+
+  [1] PTR '(anon)' type_id=2
+  [2] UNION 'my_union' size=48 vlen=2
+          'a' type_id=3 bits_offset=0
+          'b' type_id=4 bits_offset=0
+  [3] INT 'int' size=4 bits_offset=0 nr_bits=32 encoding=SIGNED
+  [4] STRUCT 'my_struct' size=48 vlen=6
+          'const_int_field' type_id=5 bits_offset=0
+          'bitfield_field' type_id=3 bits_offset=32 bitfield_size=4
+          'arr_field' type_id=8 bits_offset=40
+          'fwd_field' type_id=10 bits_offset=192
+          'enum_field' type_id=14 bits_offset=256
+          'typedef_ptr_field' type_id=15 bits_offset=320
+  [5] CONST '(anon)' type_id=6
+  [6] INT 'unsigned int' size=4 bits_offset=0 nr_bits=32 encoding=(none)
+  [7] INT 'char' size=1 bits_offset=0 nr_bits=8 encoding=SIGNED
+  [8] ARRAY '(anon)' type_id=7 index_type_id=9 nr_elems=16
+  [9] INT '__ARRAY_SIZE_TYPE__' size=4 bits_offset=0 nr_bits=32 encoding=(none)
+  [10] RESTRICT '(anon)' type_id=11
+  [11] PTR '(anon)' type_id=12
+  [12] CONST '(anon)' type_id=13
+  [13] FWD 'fwd_struct' fwd_kind=union
+  [14] ENUM 'my_enum' size=4 vlen=2
+          'VAL1' val=3
+          'VAL2' val=7
+  [15] PTR '(anon)' type_id=16
+  [16] VOLATILE '(anon)' type_id=17
+  [17] TYPEDEF 'my_struct_t' type_id=4
+  [18] FUNC_PROTO '(anon)' ret_type_id=3 vlen=2
+          'arg1' type_id=1
+          'arg2' type_id=3
+  [19] FUNC 'my_func' type_id=18
+  [20] VAR 'struct_global_var' type_id=4, linkage=global-alloc
+  [21] VAR 'global_var' type_id=3, linkage=global-alloc
+  [22] VAR 'my_func.static_var' type_id=3, linkage=static
+  [23] DATASEC 'data_sec' size=0 vlen=3
+          type_id=20 offset=0 size=48
+          type_id=21 offset=0 size=4
+          type_id=22 offset=52 size=4
+
+The following commands print BTF types associated with specified map's key,
+value, both key and value, and all BTF types, respectively. By default, both
+key and value types will be printed.
+
+**# bpftool btf dump map id 123 key**
+
+::
+
+  [39] TYPEDEF 'u32' type_id=37
+
+**# bpftool btf dump map id 123 value**
+
+::
+
+  [86] PTR '(anon)' type_id=87
+
+**# bpftool btf dump map id 123 kv**
+
+::
+
+  [39] TYPEDEF 'u32' type_id=37
+  [86] PTR '(anon)' type_id=87
+
+**# bpftool btf dump map id 123 all**
+
+::
+
+  [1] PTR '(anon)' type_id=0
+  .
+  .
+  .
+  [2866] ARRAY '(anon)' type_id=52 index_type_id=51 nr_elems=4
+
+All the standard ways to specify map or program are supported:
+
+**# bpftool btf dump map id 123**
+
+**# bpftool btf dump map pinned /sys/fs/bpf/map_name**
+
+**# bpftool btf dump prog id 456**
+
+**# bpftool btf dump prog tag b88e0a09b1d9759d**
+
+**# bpftool btf dump prog pinned /sys/fs/bpf/prog_name**
+
+SEE ALSO
+========
+	**bpf**\ (2),
+	**bpf-helpers**\ (7),
+	**bpftool**\ (8),
+	**bpftool-map**\ (8),
+	**bpftool-prog**\ (8),
+	**bpftool-cgroup**\ (8),
+	**bpftool-feature**\ (8),
+	**bpftool-net**\ (8),
+	**bpftool-perf**\ (8)
diff --git a/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst b/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst
index 9bb9ace54ba8..ac26876389c2 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst
@@ -29,7 +29,7 @@ CGROUP COMMANDS
 |	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* }
 |	*ATTACH_TYPE* := { **ingress** | **egress** | **sock_create** | **sock_ops** | **device** |
 |		**bind4** | **bind6** | **post_bind4** | **post_bind6** | **connect4** | **connect6** |
-|               **sendmsg4** | **sendmsg6** }
+|		**sendmsg4** | **sendmsg6** | **sysctl** }
 |	*ATTACH_FLAGS* := { **multi** | **override** }
 
 DESCRIPTION
@@ -85,7 +85,8 @@ DESCRIPTION
 		  **sendmsg4** call to sendto(2), sendmsg(2), sendmmsg(2) for an
 		  unconnected udp4 socket (since 4.18);
 		  **sendmsg6** call to sendto(2), sendmsg(2), sendmmsg(2) for an
-		  unconnected udp6 socket (since 4.18).
+		  unconnected udp6 socket (since 4.18);
+		  **sysctl** sysctl access (since 5.2).
 
 	**bpftool cgroup detach** *CGROUP* *ATTACH_TYPE* *PROG*
 		  Detach *PROG* from the cgroup *CGROUP* and attach type
@@ -99,7 +100,7 @@ OPTIONS
 	-h, --help
 		  Print short generic help message (similar to **bpftool help**).
 
-	-v, --version
+	-V, --version
 		  Print version number (similar to **bpftool version**).
 
 	-j, --json
@@ -144,4 +145,5 @@ SEE ALSO
 	**bpftool-map**\ (8),
 	**bpftool-feature**\ (8),
 	**bpftool-net**\ (8),
-	**bpftool-perf**\ (8)
+	**bpftool-perf**\ (8),
+	**bpftool-btf**\ (8)
diff --git a/tools/bpf/bpftool/Documentation/bpftool-feature.rst b/tools/bpf/bpftool/Documentation/bpftool-feature.rst
index 82de03dd8f52..14180e887082 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-feature.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-feature.rst
@@ -63,7 +63,7 @@ OPTIONS
 	-h, --help
 		  Print short generic help message (similar to **bpftool help**).
 
-	-v, --version
+	-V, --version
 		  Print version number (similar to **bpftool version**).
 
 	-j, --json
@@ -82,4 +82,5 @@ SEE ALSO
 	**bpftool-map**\ (8),
 	**bpftool-cgroup**\ (8),
 	**bpftool-net**\ (8),
-	**bpftool-perf**\ (8)
+	**bpftool-perf**\ (8),
+	**bpftool-btf**\ (8)
diff --git a/tools/bpf/bpftool/Documentation/bpftool-map.rst b/tools/bpf/bpftool/Documentation/bpftool-map.rst
index 5c984ffc9f01..13ef27b39f20 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-map.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-map.rst
@@ -135,7 +135,7 @@ OPTIONS
 	-h, --help
 		  Print short generic help message (similar to **bpftool help**).
 
-	-v, --version
+	-V, --version
 		  Print version number (similar to **bpftool version**).
 
 	-j, --json
@@ -258,4 +258,5 @@ SEE ALSO
 	**bpftool-cgroup**\ (8),
 	**bpftool-feature**\ (8),
 	**bpftool-net**\ (8),
-	**bpftool-perf**\ (8)
+	**bpftool-perf**\ (8),
+	**bpftool-btf**\ (8)
diff --git a/tools/bpf/bpftool/Documentation/bpftool-net.rst b/tools/bpf/bpftool/Documentation/bpftool-net.rst
index 779dab3650ee..934580850f42 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-net.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-net.rst
@@ -55,7 +55,7 @@ OPTIONS
 	-h, --help
 		  Print short generic help message (similar to **bpftool help**).
 
-	-v, --version
+	-V, --version
 		  Print version number (similar to **bpftool version**).
 
 	-j, --json
@@ -143,4 +143,5 @@ SEE ALSO
 	**bpftool-map**\ (8),
 	**bpftool-cgroup**\ (8),
 	**bpftool-feature**\ (8),
-	**bpftool-perf**\ (8)
+	**bpftool-perf**\ (8),
+	**bpftool-btf**\ (8)
diff --git a/tools/bpf/bpftool/Documentation/bpftool-perf.rst b/tools/bpf/bpftool/Documentation/bpftool-perf.rst
index bca5590a80d0..0c7576523a21 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-perf.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-perf.rst
@@ -43,7 +43,7 @@ OPTIONS
 	-h, --help
 		  Print short generic help message (similar to **bpftool help**).
 
-	-v, --version
+	-V, --version
 		  Print version number (similar to **bpftool version**).
 
 	-j, --json
@@ -85,4 +85,5 @@ SEE ALSO
 	**bpftool-map**\ (8),
 	**bpftool-cgroup**\ (8),
 	**bpftool-feature**\ (8),
-	**bpftool-net**\ (8)
+	**bpftool-net**\ (8),
+	**bpftool-btf**\ (8)
diff --git a/tools/bpf/bpftool/Documentation/bpftool-prog.rst b/tools/bpf/bpftool/Documentation/bpftool-prog.rst
index 9386bd6e0396..e8118544d118 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-prog.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-prog.rst
@@ -25,7 +25,7 @@ PROG COMMANDS
 |	**bpftool** **prog dump xlated** *PROG* [{**file** *FILE* | **opcodes** | **visual** | **linum**}]
 |	**bpftool** **prog dump jited**  *PROG* [{**file** *FILE* | **opcodes** | **linum**}]
 |	**bpftool** **prog pin** *PROG* *FILE*
-|	**bpftool** **prog { load | loadall }** *OBJ* *PATH* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*]
+|	**bpftool** **prog { load | loadall }** *OBJ* *PATH* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] [**pinmaps** *MAP_DIR*]
 |	**bpftool** **prog attach** *PROG* *ATTACH_TYPE* [*MAP*]
 |	**bpftool** **prog detach** *PROG* *ATTACH_TYPE* [*MAP*]
 |	**bpftool** **prog tracelog**
@@ -39,7 +39,8 @@ PROG COMMANDS
 |		**cgroup/sock** | **cgroup/dev** | **lwt_in** | **lwt_out** | **lwt_xmit** |
 |		**lwt_seg6local** | **sockops** | **sk_skb** | **sk_msg** | **lirc_mode2** |
 |		**cgroup/bind4** | **cgroup/bind6** | **cgroup/post_bind4** | **cgroup/post_bind6** |
-|		**cgroup/connect4** | **cgroup/connect6** | **cgroup/sendmsg4** | **cgroup/sendmsg6**
+|		**cgroup/connect4** | **cgroup/connect6** | **cgroup/sendmsg4** | **cgroup/sendmsg6** |
+|		**cgroup/sysctl**
 |	}
 |       *ATTACH_TYPE* := {
 |		**msg_verdict** | **stream_verdict** | **stream_parser** | **flow_dissector**
@@ -56,6 +57,14 @@ DESCRIPTION
 		  Output will start with program ID followed by program type and
 		  zero or more named attributes (depending on kernel version).
 
+		  Since Linux 5.1 the kernel can collect statistics on BPF
+		  programs (such as the total time spent running the program,
+		  and the number of times it was run). If available, bpftool
+		  shows such statistics. However, the kernel does not collect
+		  them by defaults, as it slightly impacts performance on each
+		  program run. Activation or deactivation of the feature is
+		  performed via the **kernel.bpf_stats_enabled** sysctl knob.
+
 	**bpftool prog dump xlated** *PROG* [{ **file** *FILE* | **opcodes** | **visual** | **linum** }]
 		  Dump eBPF instructions of the program from the kernel. By
 		  default, eBPF will be disassembled and printed to standard
@@ -144,7 +153,7 @@ OPTIONS
 	-h, --help
 		  Print short generic help message (similar to **bpftool help**).
 
-	-v, --version
+	-V, --version
 		  Print version number (similar to **bpftool version**).
 
 	-j, --json
@@ -262,4 +271,5 @@ SEE ALSO
 	**bpftool-cgroup**\ (8),
 	**bpftool-feature**\ (8),
 	**bpftool-net**\ (8),
-	**bpftool-perf**\ (8)
+	**bpftool-perf**\ (8),
+	**bpftool-btf**\ (8)
diff --git a/tools/bpf/bpftool/Documentation/bpftool.rst b/tools/bpf/bpftool/Documentation/bpftool.rst
index 4f2188845dd8..3e562d7fd56f 100644
--- a/tools/bpf/bpftool/Documentation/bpftool.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool.rst
@@ -49,7 +49,7 @@ OPTIONS
 	-h, --help
 		  Print short help message (similar to **bpftool help**).
 
-	-v, --version
+	-V, --version
 		  Print version number (similar to **bpftool version**).
 
 	-j, --json
@@ -76,4 +76,5 @@ SEE ALSO
 	**bpftool-cgroup**\ (8),
 	**bpftool-feature**\ (8),
 	**bpftool-net**\ (8),
-	**bpftool-perf**\ (8)
+	**bpftool-perf**\ (8),
+	**bpftool-btf**\ (8)