arm64: dts: mediatek: mt7988a-bananapi-bpi-r4: add ramoops region

Reserve 1 MiB of RAM just below the ARM Trusted Firmware secmon region
(0x42f00000-0x43000000) for persistent kernel log storage via pstore/ramoops,
allowing post-panic console output and oops dumps to be recovered after a
reboot. Without it, kernel crash logs on this board are lost when the SoC
warm-resets and the on-chip console buffer is reinitialised.

With record-size=128 KiB, console-size=256 KiB, ftrace-size=64 KiB and
pmsg-size=64 KiB, ramoops_probe() carves the post-console remainder
(640 KiB) into five 128 KiB kmsg records, with the requested ecc-size=16
reserving a small Reed-Solomon parity block from each zone's own
allocation (per persistent_ram_new()). The ECC lets pstore recover dumps
even when the panic path truncates writes mid-record.

The no-map property is required so the reserved region is kept out of the
kernel linear map. ramoops remaps the carve-out write-combine via
ioremap_wc(); on arm64, leaving the same physical RAM mapped cacheable in
the linear map at the same time is an attribute-mismatch and risks losing
panic data to dirty cache evictions from the linear alias.

The carve-out sits immediately below the ATF region already declared at
0x43000000 in mt7988a.dtsi, so no other reserved-memory child is moved or
resized. BPI-R4 ships with at least 4 GiB of DRAM starting at 0x40000000,
so the region is well within installed memory on every variant.

For the carve-out to actually preserve content across a reset, the boot
loader must also avoid touching this region on warm reset; on standard
BPI-R4 boards with the stock OpenWrt U-Boot fork this already holds.

Signed-off-by: Martino Dell'Ambrogio <tillo@tillo.ch>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

0 files changed, 0 insertions, 0 deletions