Merge tag 'stm32-dt-for-v7.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt

STM32 DT for v7.4, round 1

Highlights:
==========

  - STM32MP13:
    - Add DCMI / LTDC ETZPC access controler.
    - Add SRAM nodes: SRAM1 16kB, SRAM2 8kB, SRAM3 8kB.
    - Add SPI5 DMA chaining support.

  - STMP32MP15:
    - Use DMA FIFO for all SPIs.
    - Add SPI4 DMA chaining support

  - STM32MP25/23:
    - Add SYSCFG driver to bind USB PHY.
    - Add digital temperature sendore (Moortec).
    - Add DCMI nodes.
    - Enable eMMC on stm32mp257f-dk.
    - Add I/O sync to eth1 rgmii pins to match with RGMII
      specification.

    - ENGICAM:
     - Add Engicam MicroGEA-STM32MP257D-RMM board support
       based on Engicam MicroGEA-STM32MP257 SoM (8GB eMMC Flash,
       2 GB LPDDR4 DRAM). Embedding CAN, LEDS, LCD with touchscreen,
       uSD, Audiocodec.

    - DH:
      - Add DH STM32MP23xx/STM32MP25xx DHCOS SoM and Breakout Board
        and DHSBC support: This stm32mp25xx-dhcos-bb board is a stack
	of DHCOS SoM based on STM32MP25xx SoC (1200MHz /
	crypto capabilities) populated on SoM Breakout Board,
	the stm32mp255c-dhcos-dhsbc is the SoM populated on DHSBC
	carrier board. The stm32mp23xx-dhcos-bb is a stack with
        STM32MP23xx SoC.

      - The SoM contains the following peripherals:
        - STPMIC (power delivery)
        - 4GiB LPDDR4 memory
        - eMMC and SDIO WiFi module

      - The Breakout Board carrier board contains the following peripherals:
        - USB-C peripheral port, power supply plug

      - The DHSBC carrier board contains the following peripherals:
        - Two RGMII Ethernet ports
        - MicroSD slot
        - LVDS connector
        - MIPI CSI2 connector
        - USB-A Host port, USB-C power supply plug
        - USB-C / DP port
        - Expansion connector

* tag 'stm32-dt-for-v7.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (64 commits)
  soc: st: Add STM32MP2 SYSCFG driver
  dt-bindings: arm: stm32: Document st,stm32mp23/25-syscfg subnodes and cells
  arm64: dts: st: fix sai3b unit address on stm32mp231
  arm64: dts: st: fix sai3b unit address on stm32mp251
  arm64: defconfig: enable Moortec MR75203 PVT controller
  arm64: dts: st: add digital temperature sensor on stm32mp251
  arm64: dts: st: add Engicam MicroGEA-STM32MP257D-RMM LVDS display overlay
  arm64: dts: st: move Engicam MicroGEA-STM32MP257D-RMM display to an overlay
  arm64: dts: st: enable eMMC on stm32mp257f-dk
  arm64: dts: st: add sdmmc2 pins_b for stm32mp25
  arm64: dts: st: add dcmi node on stm32mp23x
  arm64: dts: st: add dcmi node on stm32mp25x
  arm64: dts: st: add imx335/csi/dcmipp nodes on stm32mp235f-dk
  arm64: dts: st: use video-interfaces media bus type in stm32mp257f-ev1
  arm64: dts: st: ensure IMX335 is enabled on stm32mp257f-ev1
  arm64: dts: st: add imx335/csi/dcmipp nodes on stm32mp257f-dk
  MAINTAINERS: Add DH electronics DHCOS SoM entry and fix email address
  arm64: dts: st: Add support for DH electronics STM32MP23xx/STM32MP25xx DHCOS SoM and Breakout Board and DHSBC
  arm64: dts: st: Add pinmux nodes for DH electronics STM32MP23xx/STM32MP25xx DHCOS SoM and Breakout Board
  arm64: dts: st: Add OMM node on stm32mp231
  ...

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

0 files changed, 0 insertions, 0 deletions