ARM: dts: vf: add Iris carrier board support for Colibri VF50 and VF61

The Iris is a small off-the-shelf carrier board for the Colibri family.
Describe what the board itself provides: Ethernet, one USB host and one
OTG port, the pin header UARTs, i2c with the carrier RTC on it, the PWM
pins on the X16 header, SPI and the microSD slot. The host port gets its
VBUS through a regulator on SODIMM 129, and the two GPIOs that turn the
RS232 transceivers on, SODIMM 102 and 104, are hogged. The touchscreen is
an add-on rather than part of the board, so it is left out.

Describe an Iris V1.1. A V2.0 carries the same signals on the same pins;
what it adds, and what this does not describe, is the regulator on SODIMM
100 that can cut power to the uSD slot.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Mehmet Fide <mehmet.fide@screeningeagle.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>

0 files changed, 0 insertions, 0 deletions