Merge branch '5.15-2.2.x-imx' into toradex_5.15-2.2.x-imxtoradex_5.15-2.2.x-imx

Conflicts:
	drivers/tty/serial/fsl_lpuart.c

Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>

14 files changed, 357 insertions, 43 deletions

diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 99e17a0a1364..2109bd42c144 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -2399,6 +2399,11 @@ sub get_version {
     return if ($have_version);
     doprint "$make kernelrelease ... ";
     $version = `$make -s kernelrelease | tail -1`;
+    if (!length($version)) {
+	run_command "$make allnoconfig" or return 0;
+	doprint "$make kernelrelease ... ";
+	$version = `$make -s kernelrelease | tail -1`;
+    }
     chomp($version);
     doprint "$version\n";
     $have_version = 1;
@@ -2939,8 +2944,6 @@ sub run_bisect_test {
 
     my $failed = 0;
     my $result;
-    my $output;
-    my $ret;
 
     $in_bisect = 1;
 
@@ -4279,6 +4282,14 @@ if (defined($opt{"LOG_FILE"})) {
     if ($opt{"CLEAR_LOG"}) {
 	unlink $opt{"LOG_FILE"};
     }
+
+    if (! -e $opt{"LOG_FILE"} && $opt{"LOG_FILE"} =~ m,^(.*/),) {
+        my $dir = $1;
+        if (! -d $dir) {
+            mkpath($dir) or die "Failed to create directories '$dir': $!";
+            print "\nThe log directory $dir did not exist, so it was created.\n";
+        }
+    }
     open(LOG, ">> $opt{LOG_FILE}") or die "Can't write to $opt{LOG_FILE}";
     LOG->autoflush(1);
 }
diff --git a/tools/testing/selftests/bpf/test_tc_tunnel.sh b/tools/testing/selftests/bpf/test_tc_tunnel.sh
index 38c6e9f16f41..88488779792f 100755
--- a/tools/testing/selftests/bpf/test_tc_tunnel.sh
+++ b/tools/testing/selftests/bpf/test_tc_tunnel.sh
@@ -295,6 +295,7 @@ else
 	client_connect
 	verify_data
 	server_listen
+	wait_for_port ${port} ${netcat_opt}
 fi
 
 # bpf_skb_net_shrink does not take tunnel flags yet, cannot update L3.
diff --git a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh
index 185b02d2d4cd..7af78990b5bb 100755
--- a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh
+++ b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh
@@ -142,7 +142,7 @@ function pre_ethtool {
 }
 
 function check_table {
-    local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1
+    local path=$NSIM_DEV_DFS/ports/$port/udp_ports/table$1
     local -n expected=$2
     local last=$3
 
@@ -212,7 +212,7 @@ function check_tables {
 }
 
 function print_table {
-    local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1
+    local path=$NSIM_DEV_DFS/ports/$port/udp_ports/table$1
     read -a have < $path
 
     tree $NSIM_DEV_DFS/
@@ -640,7 +640,7 @@ for port in 0 1; do
     NSIM_NETDEV=`get_netdev_name old_netdevs`
     ifconfig $NSIM_NETDEV up
 
-    echo 110 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error
+    echo 110 > $NSIM_DEV_DFS/ports/$port/udp_ports/inject_error
 
     msg="1 - create VxLANs v6"
     exp0=( 0 0 0 0 )
@@ -662,7 +662,7 @@ for port in 0 1; do
     new_geneve gnv0 20000
 
     msg="2 - destroy GENEVE"
-    echo 2 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error
+    echo 2 > $NSIM_DEV_DFS/ports/$port/udp_ports/inject_error
     exp1=( `mke 20000 2` 0 0 0 )
     del_dev gnv0
 
@@ -763,7 +763,7 @@ for port in 0 1; do
     msg="create VxLANs v4"
     new_vxlan vxlan0 10000 $NSIM_NETDEV
 
-    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset
     check_tables
 
     msg="NIC device goes down"
@@ -774,7 +774,7 @@ for port in 0 1; do
     fi
     check_tables
 
-    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset
     check_tables
 
     msg="NIC device goes up again"
@@ -788,7 +788,7 @@ for port in 0 1; do
     del_dev vxlan0
     check_tables
 
-    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset
     check_tables
 
     msg="destroy NIC"
@@ -895,7 +895,7 @@ msg="vacate VxLAN in overflow table"
 exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` )
 del_dev vxlan2
 
-echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset
 check_tables
 
 msg="tunnels destroyed 2"
diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
index a6ea2bd63a83..af65a83d1422 100644
--- a/tools/testing/selftests/kselftest_harness.h
+++ b/tools/testing/selftests/kselftest_harness.h
@@ -701,33 +701,33 @@
 		/* Report with actual signedness to avoid weird output. */ \
 		switch (is_signed_type(__exp) * 2 + is_signed_type(__seen)) { \
 		case 0: { \
-			unsigned long long __exp_print = (uintptr_t)__exp; \
-			unsigned long long __seen_print = (uintptr_t)__seen; \
-			__TH_LOG("Expected %s (%llu) %s %s (%llu)", \
+			uintmax_t __exp_print = (uintmax_t)__exp; \
+			uintmax_t __seen_print = (uintmax_t)__seen; \
+			__TH_LOG("Expected %s (%ju) %s %s (%ju)", \
 				 _expected_str, __exp_print, #_t, \
 				 _seen_str, __seen_print); \
 			break; \
 			} \
 		case 1: { \
-			unsigned long long __exp_print = (uintptr_t)__exp; \
-			long long __seen_print = (intptr_t)__seen; \
-			__TH_LOG("Expected %s (%llu) %s %s (%lld)", \
+			uintmax_t __exp_print = (uintmax_t)__exp; \
+			intmax_t  __seen_print = (intmax_t)__seen; \
+			__TH_LOG("Expected %s (%ju) %s %s (%jd)", \
 				 _expected_str, __exp_print, #_t, \
 				 _seen_str, __seen_print); \
 			break; \
 			} \
 		case 2: { \
-			long long __exp_print = (intptr_t)__exp; \
-			unsigned long long __seen_print = (uintptr_t)__seen; \
-			__TH_LOG("Expected %s (%lld) %s %s (%llu)", \
+			intmax_t  __exp_print = (intmax_t)__exp; \
+			uintmax_t __seen_print = (uintmax_t)__seen; \
+			__TH_LOG("Expected %s (%jd) %s %s (%ju)", \
 				 _expected_str, __exp_print, #_t, \
 				 _seen_str, __seen_print); \
 			break; \
 			} \
 		case 3: { \
-			long long __exp_print = (intptr_t)__exp; \
-			long long __seen_print = (intptr_t)__seen; \
-			__TH_LOG("Expected %s (%lld) %s %s (%lld)", \
+			intmax_t  __exp_print = (intmax_t)__exp; \
+			intmax_t  __seen_print = (intmax_t)__seen; \
+			__TH_LOG("Expected %s (%jd) %s %s (%jd)", \
 				 _expected_str, __exp_print, #_t, \
 				 _seen_str, __seen_print); \
 			break; \
diff --git a/tools/testing/selftests/landlock/base_test.c b/tools/testing/selftests/landlock/base_test.c
index 1a8fa6b0c887..c78064cf50b1 100644
--- a/tools/testing/selftests/landlock/base_test.c
+++ b/tools/testing/selftests/landlock/base_test.c
@@ -98,10 +98,54 @@ TEST(abi_version)
 	ASSERT_EQ(EINVAL, errno);
 }
 
+/*
+ * Old source trees might not have the set of Kselftest fixes related to kernel
+ * UAPI headers.
+ */
+#ifndef LANDLOCK_CREATE_RULESET_ERRATA
+#define LANDLOCK_CREATE_RULESET_ERRATA (1U << 1)
+#endif
+
+TEST(errata)
+{
+	const struct landlock_ruleset_attr ruleset_attr = {
+		.handled_access_fs = LANDLOCK_ACCESS_FS_READ_FILE,
+	};
+	int errata;
+
+	errata = landlock_create_ruleset(NULL, 0,
+					 LANDLOCK_CREATE_RULESET_ERRATA);
+	/* The errata bitmask will not be backported to tests. */
+	ASSERT_LE(0, errata);
+	TH_LOG("errata: 0x%x", errata);
+
+	ASSERT_EQ(-1, landlock_create_ruleset(&ruleset_attr, 0,
+					      LANDLOCK_CREATE_RULESET_ERRATA));
+	ASSERT_EQ(EINVAL, errno);
+
+	ASSERT_EQ(-1, landlock_create_ruleset(NULL, sizeof(ruleset_attr),
+					      LANDLOCK_CREATE_RULESET_ERRATA));
+	ASSERT_EQ(EINVAL, errno);
+
+	ASSERT_EQ(-1,
+		  landlock_create_ruleset(&ruleset_attr, sizeof(ruleset_attr),
+					  LANDLOCK_CREATE_RULESET_ERRATA));
+	ASSERT_EQ(EINVAL, errno);
+
+	ASSERT_EQ(-1, landlock_create_ruleset(
+			      NULL, 0,
+			      LANDLOCK_CREATE_RULESET_VERSION |
+				      LANDLOCK_CREATE_RULESET_ERRATA));
+	ASSERT_EQ(-1, landlock_create_ruleset(NULL, 0,
+					      LANDLOCK_CREATE_RULESET_ERRATA |
+						      1 << 31));
+	ASSERT_EQ(EINVAL, errno);
+}
+
 /* Tests ordering of syscall argument checks. */
 TEST(create_ruleset_checks_ordering)
 {
-	const int last_flag = LANDLOCK_CREATE_RULESET_VERSION;
+	const int last_flag = LANDLOCK_CREATE_RULESET_ERRATA;
 	const int invalid_flag = last_flag << 1;
 	int ruleset_fd;
 	const struct landlock_ruleset_attr ruleset_attr = {
diff --git a/tools/testing/selftests/landlock/fs_test.c b/tools/testing/selftests/landlock/fs_test.c
index ea988b3d6b2e..47fc4392f412 100644
--- a/tools/testing/selftests/landlock/fs_test.c
+++ b/tools/testing/selftests/landlock/fs_test.c
@@ -1767,8 +1767,7 @@ static void test_execute(struct __test_metadata *const _metadata, const int err,
 	ASSERT_EQ(1, WIFEXITED(status));
 	ASSERT_EQ(err ? 2 : 0, WEXITSTATUS(status))
 	{
-		TH_LOG("Unexpected return code for \"%s\": %s", path,
-		       strerror(errno));
+		TH_LOG("Unexpected return code for \"%s\"", path);
 	};
 }
 
diff --git a/tools/testing/selftests/mincore/mincore_selftest.c b/tools/testing/selftests/mincore/mincore_selftest.c
index 4c88238fc8f0..c0ae86c28d7f 100644
--- a/tools/testing/selftests/mincore/mincore_selftest.c
+++ b/tools/testing/selftests/mincore/mincore_selftest.c
@@ -261,9 +261,6 @@ TEST(check_file_mmap)
 		TH_LOG("No read-ahead pages found in memory");
 	}
 
-	EXPECT_LT(i, vec_size) {
-		TH_LOG("Read-ahead pages reached the end of the file");
-	}
 	/*
 	 * End of the readahead window. The rest of the pages shouldn't
 	 * be in memory.
diff --git a/tools/testing/selftests/net/ipsec.c b/tools/testing/selftests/net/ipsec.c
index c5be3f390849..ae3da27b0097 100644
--- a/tools/testing/selftests/net/ipsec.c
+++ b/tools/testing/selftests/net/ipsec.c
@@ -189,7 +189,8 @@ static int rtattr_pack(struct nlmsghdr *nh, size_t req_sz,
 
 	attr->rta_len = RTA_LENGTH(size);
 	attr->rta_type = rta_type;
-	memcpy(RTA_DATA(attr), payload, size);
+	if (payload)
+		memcpy(RTA_DATA(attr), payload, size);
 
 	return 0;
 }
diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh
index 84c05e533056..33f4fb34ac9b 100755
--- a/tools/testing/selftests/net/pmtu.sh
+++ b/tools/testing/selftests/net/pmtu.sh
@@ -26,6 +26,15 @@
 # - pmtu_ipv6
 #	Same as pmtu_ipv4, except for locked PMTU tests, using IPv6
 #
+# - pmtu_ipv4_dscp_icmp_exception
+#	Set up the same network topology as pmtu_ipv4, but use non-default
+#	routing table in A. A fib-rule is used to jump to this routing table
+#	based on DSCP. Send ICMPv4 packets with the expected DSCP value and
+#	verify that ECN doesn't interfere with the creation of PMTU exceptions.
+#
+# - pmtu_ipv4_dscp_udp_exception
+#	Same as pmtu_ipv4_dscp_icmp_exception, but use UDP instead of ICMP.
+#
 # - pmtu_ipv4_vxlan4_exception
 #	Set up the same network topology as pmtu_ipv4, create a VXLAN tunnel
 #	over IPv4 between A and B, routed via R1. On the link between R1 and B,
@@ -188,6 +197,12 @@
 #
 # - pmtu_ipv6_route_change
 #	Same as above but with IPv6
+#
+# - pmtu_ipv4_mp_exceptions
+#	Use the same topology as in pmtu_ipv4, but add routeable addresses
+#	on host A and B on lo reachable via both routers. Host A and B
+#	addresses have multipath routes to each other, b_r1 mtu = 1500.
+#	Check that PMTU exceptions are created for both paths.
 
 # Kselftest framework requirement - SKIP code is 4.
 ksft_skip=4
@@ -203,6 +218,8 @@ which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
 tests="
 	pmtu_ipv4_exception		ipv4: PMTU exceptions			1
 	pmtu_ipv6_exception		ipv6: PMTU exceptions			1
+	pmtu_ipv4_dscp_icmp_exception	ICMPv4 with DSCP and ECN: PMTU exceptions	1
+	pmtu_ipv4_dscp_udp_exception	UDPv4 with DSCP and ECN: PMTU exceptions	1
 	pmtu_ipv4_vxlan4_exception	IPv4 over vxlan4: PMTU exceptions	1
 	pmtu_ipv6_vxlan4_exception	IPv6 over vxlan4: PMTU exceptions	1
 	pmtu_ipv4_vxlan6_exception	IPv4 over vxlan6: PMTU exceptions	1
@@ -255,7 +272,8 @@ tests="
 	list_flush_ipv4_exception	ipv4: list and flush cached exceptions	1
 	list_flush_ipv6_exception	ipv6: list and flush cached exceptions	1
 	pmtu_ipv4_route_change		ipv4: PMTU exception w/route replace	1
-	pmtu_ipv6_route_change		ipv6: PMTU exception w/route replace	1"
+	pmtu_ipv6_route_change		ipv6: PMTU exception w/route replace	1
+	pmtu_ipv4_mp_exceptions		ipv4: PMTU multipath nh exceptions	1"
 
 NS_A="ns-A"
 NS_B="ns-B"
@@ -323,6 +341,9 @@ routes_nh="
 	B	6	default			61
 "
 
+policy_mark=0x04
+rt_table=main
+
 veth4_a_addr="192.168.1.1"
 veth4_b_addr="192.168.1.2"
 veth4_c_addr="192.168.2.10"
@@ -339,6 +360,9 @@ tunnel6_a_addr="fd00:2::a"
 tunnel6_b_addr="fd00:2::b"
 tunnel6_mask="64"
 
+host4_a_addr="192.168.99.99"
+host4_b_addr="192.168.88.88"
+
 dummy6_0_prefix="fc00:1000::"
 dummy6_1_prefix="fc00:1001::"
 dummy6_mask="64"
@@ -346,6 +370,7 @@ dummy6_mask="64"
 err_buf=
 tcpdump_pids=
 nettest_pids=
+socat_pids=
 
 err() {
 	err_buf="${err_buf}${1}
@@ -725,7 +750,7 @@ setup_routing_old() {
 
 		ns_name="$(nsname ${ns})"
 
-		ip -n ${ns_name} route add ${addr} via ${gw}
+		ip -n "${ns_name}" route add "${addr}" table "${rt_table}" via "${gw}"
 
 		ns=""; addr=""; gw=""
 	done
@@ -755,7 +780,7 @@ setup_routing_new() {
 
 		ns_name="$(nsname ${ns})"
 
-		ip -n ${ns_name} -${fam} route add ${addr} nhid ${nhid}
+		ip -n "${ns_name}" -"${fam}" route add "${addr}" table "${rt_table}" nhid "${nhid}"
 
 		ns=""; fam=""; addr=""; nhid=""
 	done
@@ -800,6 +825,24 @@ setup_routing() {
 	return 0
 }
 
+setup_policy_routing() {
+	setup_routing
+
+	ip -netns "${NS_A}" -4 rule add dsfield "${policy_mark}" \
+		table "${rt_table}"
+
+	# Set the IPv4 Don't Fragment bit with tc, since socat doesn't seem to
+	# have an option do to it.
+	tc -netns "${NS_A}" qdisc replace dev veth_A-R1 root prio
+	tc -netns "${NS_A}" qdisc replace dev veth_A-R2 root prio
+	tc -netns "${NS_A}" filter add dev veth_A-R1                      \
+		protocol ipv4 flower ip_proto udp                         \
+		action pedit ex munge ip df set 0x40 pipe csum ip and udp
+	tc -netns "${NS_A}" filter add dev veth_A-R2                      \
+		protocol ipv4 flower ip_proto udp                         \
+		action pedit ex munge ip df set 0x40 pipe csum ip and udp
+}
+
 setup_bridge() {
 	run_cmd ${ns_a} ip link add br0 type bridge || return $ksft_skip
 	run_cmd ${ns_a} ip link set br0 up
@@ -874,6 +917,52 @@ setup_ovs_bridge() {
 	run_cmd ip route add ${prefix6}:${b_r1}::1 via ${prefix6}:${a_r1}::2
 }
 
+setup_multipath_new() {
+	# Set up host A with multipath routes to host B host4_b_addr
+	run_cmd ${ns_a} ip addr add ${host4_a_addr} dev lo
+	run_cmd ${ns_a} ip nexthop add id 401 via ${prefix4}.${a_r1}.2 dev veth_A-R1
+	run_cmd ${ns_a} ip nexthop add id 402 via ${prefix4}.${a_r2}.2 dev veth_A-R2
+	run_cmd ${ns_a} ip nexthop add id 403 group 401/402
+	run_cmd ${ns_a} ip route add ${host4_b_addr} src ${host4_a_addr} nhid 403
+
+	# Set up host B with multipath routes to host A host4_a_addr
+	run_cmd ${ns_b} ip addr add ${host4_b_addr} dev lo
+	run_cmd ${ns_b} ip nexthop add id 401 via ${prefix4}.${b_r1}.2 dev veth_B-R1
+	run_cmd ${ns_b} ip nexthop add id 402 via ${prefix4}.${b_r2}.2 dev veth_B-R2
+	run_cmd ${ns_b} ip nexthop add id 403 group 401/402
+	run_cmd ${ns_b} ip route add ${host4_a_addr} src ${host4_b_addr} nhid 403
+}
+
+setup_multipath_old() {
+	# Set up host A with multipath routes to host B host4_b_addr
+	run_cmd ${ns_a} ip addr add ${host4_a_addr} dev lo
+	run_cmd ${ns_a} ip route add ${host4_b_addr} \
+			src ${host4_a_addr} \
+			nexthop via ${prefix4}.${a_r1}.2 weight 1 \
+			nexthop via ${prefix4}.${a_r2}.2 weight 1
+
+	# Set up host B with multipath routes to host A host4_a_addr
+	run_cmd ${ns_b} ip addr add ${host4_b_addr} dev lo
+	run_cmd ${ns_b} ip route add ${host4_a_addr} \
+			src ${host4_b_addr} \
+			nexthop via ${prefix4}.${b_r1}.2 weight 1 \
+			nexthop via ${prefix4}.${b_r2}.2 weight 1
+}
+
+setup_multipath() {
+	if [ "$USE_NH" = "yes" ]; then
+		setup_multipath_new
+	else
+		setup_multipath_old
+	fi
+
+	# Set up routers with routes to dummies
+	run_cmd ${ns_r1} ip route add ${host4_a_addr} via ${prefix4}.${a_r1}.1
+	run_cmd ${ns_r2} ip route add ${host4_a_addr} via ${prefix4}.${a_r2}.1
+	run_cmd ${ns_r1} ip route add ${host4_b_addr} via ${prefix4}.${b_r1}.1
+	run_cmd ${ns_r2} ip route add ${host4_b_addr} via ${prefix4}.${b_r2}.1
+}
+
 setup() {
 	[ "$(id -u)" -ne 0 ] && echo "  need to run as root" && return $ksft_skip
 
@@ -905,6 +994,11 @@ cleanup() {
 	done
 	nettest_pids=
 
+	for pid in ${socat_pids}; do
+		kill "${pid}"
+	done
+	socat_pids=
+
 	for n in ${NS_A} ${NS_B} ${NS_C} ${NS_R1} ${NS_R2}; do
 		ip netns del ${n} 2> /dev/null
 	done
@@ -950,17 +1044,15 @@ link_get_mtu() {
 }
 
 route_get_dst_exception() {
-	ns_cmd="${1}"
-	dst="${2}"
+	ns_cmd="${1}"; shift
 
-	${ns_cmd} ip route get "${dst}"
+	${ns_cmd} ip route get "$@"
 }
 
 route_get_dst_pmtu_from_exception() {
-	ns_cmd="${1}"
-	dst="${2}"
+	ns_cmd="${1}"; shift
 
-	mtu_parse "$(route_get_dst_exception "${ns_cmd}" ${dst})"
+	mtu_parse "$(route_get_dst_exception "${ns_cmd}" "$@")"
 }
 
 check_pmtu_value() {
@@ -1070,6 +1162,95 @@ test_pmtu_ipv6_exception() {
 	test_pmtu_ipvX 6
 }
 
+test_pmtu_ipv4_dscp_icmp_exception() {
+	rt_table=100
+
+	setup namespaces policy_routing || return $ksft_skip
+	trace "${ns_a}"  veth_A-R1    "${ns_r1}" veth_R1-A \
+	      "${ns_r1}" veth_R1-B    "${ns_b}"  veth_B-R1 \
+	      "${ns_a}"  veth_A-R2    "${ns_r2}" veth_R2-A \
+	      "${ns_r2}" veth_R2-B    "${ns_b}"  veth_B-R2
+
+	# Set up initial MTU values
+	mtu "${ns_a}"  veth_A-R1 2000
+	mtu "${ns_r1}" veth_R1-A 2000
+	mtu "${ns_r1}" veth_R1-B 1400
+	mtu "${ns_b}"  veth_B-R1 1400
+
+	mtu "${ns_a}"  veth_A-R2 2000
+	mtu "${ns_r2}" veth_R2-A 2000
+	mtu "${ns_r2}" veth_R2-B 1500
+	mtu "${ns_b}"  veth_B-R2 1500
+
+	len=$((2000 - 20 - 8)) # Fills MTU of veth_A-R1
+
+	dst1="${prefix4}.${b_r1}.1"
+	dst2="${prefix4}.${b_r2}.1"
+
+	# Create route exceptions
+	dsfield=${policy_mark} # No ECN bit set (Not-ECT)
+	run_cmd "${ns_a}" ping -q -M want -Q "${dsfield}" -c 1 -w 1 -s "${len}" "${dst1}"
+
+	dsfield=$(printf "%#x" $((policy_mark + 0x02))) # ECN=2 (ECT(0))
+	run_cmd "${ns_a}" ping -q -M want -Q "${dsfield}" -c 1 -w 1 -s "${len}" "${dst2}"
+
+	# Check that exceptions have been created with the correct PMTU
+	pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" "${dst1}" dsfield "${policy_mark}")"
+	check_pmtu_value "1400" "${pmtu_1}" "exceeding MTU" || return 1
+
+	pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" "${dst2}" dsfield "${policy_mark}")"
+	check_pmtu_value "1500" "${pmtu_2}" "exceeding MTU" || return 1
+}
+
+test_pmtu_ipv4_dscp_udp_exception() {
+	rt_table=100
+
+	if ! which socat > /dev/null 2>&1; then
+		echo "'socat' command not found; skipping tests"
+		return $ksft_skip
+	fi
+
+	setup namespaces policy_routing || return $ksft_skip
+	trace "${ns_a}"  veth_A-R1    "${ns_r1}" veth_R1-A \
+	      "${ns_r1}" veth_R1-B    "${ns_b}"  veth_B-R1 \
+	      "${ns_a}"  veth_A-R2    "${ns_r2}" veth_R2-A \
+	      "${ns_r2}" veth_R2-B    "${ns_b}"  veth_B-R2
+
+	# Set up initial MTU values
+	mtu "${ns_a}"  veth_A-R1 2000
+	mtu "${ns_r1}" veth_R1-A 2000
+	mtu "${ns_r1}" veth_R1-B 1400
+	mtu "${ns_b}"  veth_B-R1 1400
+
+	mtu "${ns_a}"  veth_A-R2 2000
+	mtu "${ns_r2}" veth_R2-A 2000
+	mtu "${ns_r2}" veth_R2-B 1500
+	mtu "${ns_b}"  veth_B-R2 1500
+
+	len=$((2000 - 20 - 8)) # Fills MTU of veth_A-R1
+
+	dst1="${prefix4}.${b_r1}.1"
+	dst2="${prefix4}.${b_r2}.1"
+
+	# Create route exceptions
+	run_cmd_bg "${ns_b}" socat UDP-LISTEN:50000 OPEN:/dev/null,wronly=1
+	socat_pids="${socat_pids} $!"
+
+	dsfield=${policy_mark} # No ECN bit set (Not-ECT)
+	run_cmd "${ns_a}" socat OPEN:/dev/zero,rdonly=1,readbytes="${len}" \
+		UDP:"${dst1}":50000,tos="${dsfield}"
+
+	dsfield=$(printf "%#x" $((policy_mark + 0x02))) # ECN=2 (ECT(0))
+	run_cmd "${ns_a}" socat OPEN:/dev/zero,rdonly=1,readbytes="${len}" \
+		UDP:"${dst2}":50000,tos="${dsfield}"
+
+	# Check that exceptions have been created with the correct PMTU
+	pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" "${dst1}" dsfield "${policy_mark}")"
+	check_pmtu_value "1400" "${pmtu_1}" "exceeding MTU" || return 1
+	pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" "${dst2}" dsfield "${policy_mark}")"
+	check_pmtu_value "1500" "${pmtu_2}" "exceeding MTU" || return 1
+}
+
 test_pmtu_ipvX_over_vxlanY_or_geneveY_exception() {
 	type=${1}
 	family=${2}
@@ -2072,6 +2253,36 @@ test_pmtu_ipv6_route_change() {
 	test_pmtu_ipvX_route_change 6
 }
 
+test_pmtu_ipv4_mp_exceptions() {
+	setup namespaces routing multipath || return $ksft_skip
+
+	trace "${ns_a}"  veth_A-R1    "${ns_r1}" veth_R1-A \
+	      "${ns_r1}" veth_R1-B    "${ns_b}"  veth_B-R1 \
+	      "${ns_a}"  veth_A-R2    "${ns_r2}" veth_R2-A \
+	      "${ns_r2}" veth_R2-B    "${ns_b}"  veth_B-R2
+
+	# Set up initial MTU values
+	mtu "${ns_a}"  veth_A-R1 2000
+	mtu "${ns_r1}" veth_R1-A 2000
+	mtu "${ns_r1}" veth_R1-B 1500
+	mtu "${ns_b}"  veth_B-R1 1500
+
+	mtu "${ns_a}"  veth_A-R2 2000
+	mtu "${ns_r2}" veth_R2-A 2000
+	mtu "${ns_r2}" veth_R2-B 1500
+	mtu "${ns_b}"  veth_B-R2 1500
+
+	# Ping and expect two nexthop exceptions for two routes
+	run_cmd ${ns_a} ping -q -M want -i 0.1 -c 1 -s 1800 "${host4_b_addr}"
+
+	# Check that exceptions have been created with the correct PMTU
+	pmtu_a_R1="$(route_get_dst_pmtu_from_exception "${ns_a}" "${host4_b_addr}" oif veth_A-R1)"
+	pmtu_a_R2="$(route_get_dst_pmtu_from_exception "${ns_a}" "${host4_b_addr}" oif veth_A-R2)"
+
+	check_pmtu_value "1500" "${pmtu_a_R1}" "exceeding MTU (veth_A-R1)" || return 1
+	check_pmtu_value "1500" "${pmtu_a_R2}" "exceeding MTU (veth_A-R2)" || return 1
+}
+
 usage() {
 	echo
 	echo "$0 [OPTIONS] [TEST]..."
diff --git a/tools/testing/selftests/net/rtnetlink.sh b/tools/testing/selftests/net/rtnetlink.sh
index cbf166df57da..a3597b3e579f 100755
--- a/tools/testing/selftests/net/rtnetlink.sh
+++ b/tools/testing/selftests/net/rtnetlink.sh
@@ -813,10 +813,10 @@ kci_test_ipsec_offload()
 	# does driver have correct offload info
 	diff $sysfsf - << EOF
 SA count=2 tx=3
-sa[0] tx ipaddr=0x00000000 00000000 00000000 00000000
+sa[0] tx ipaddr=$dstip
 sa[0]    spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
 sa[0]    key=0x34333231 38373635 32313039 36353433
-sa[1] rx ipaddr=0x00000000 00000000 00000000 037ba8c0
+sa[1] rx ipaddr=$srcip
 sa[1]    spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
 sa[1]    key=0x34333231 38373635 32313039 36353433
 EOF
diff --git a/tools/testing/selftests/net/udpgso.c b/tools/testing/selftests/net/udpgso.c
index b02080d09fbc..d0fba50bd6ef 100644
--- a/tools/testing/selftests/net/udpgso.c
+++ b/tools/testing/selftests/net/udpgso.c
@@ -95,6 +95,19 @@ struct testcase testcases_v4[] = {
 		.r_num_mss = 1,
 	},
 	{
+		/* datalen <= MSS < gso_len: will fall back to no GSO */
+		.tlen = CONST_MSS_V4,
+		.gso_len = CONST_MSS_V4 + 1,
+		.r_num_mss = 0,
+		.r_len_last = CONST_MSS_V4,
+	},
+	{
+		/* MSS < datalen < gso_len: fail */
+		.tlen = CONST_MSS_V4 + 1,
+		.gso_len = CONST_MSS_V4 + 2,
+		.tfail = true,
+	},
+	{
 		/* send a single MSS + 1B */
 		.tlen = CONST_MSS_V4 + 1,
 		.gso_len = CONST_MSS_V4,
@@ -198,6 +211,19 @@ struct testcase testcases_v6[] = {
 		.r_num_mss = 1,
 	},
 	{
+		/* datalen <= MSS < gso_len: will fall back to no GSO */
+		.tlen = CONST_MSS_V6,
+		.gso_len = CONST_MSS_V6 + 1,
+		.r_num_mss = 0,
+		.r_len_last = CONST_MSS_V6,
+	},
+	{
+		/* MSS < datalen < gso_len: fail */
+		.tlen = CONST_MSS_V6 + 1,
+		.gso_len = CONST_MSS_V6 + 2,
+		.tfail = true
+	},
+	{
 		/* send a single MSS + 1B */
 		.tlen = CONST_MSS_V6 + 1,
 		.gso_len = CONST_MSS_V6,
diff --git a/tools/testing/selftests/ublk/test_stripe_04.sh b/tools/testing/selftests/ublk/test_stripe_04.sh
new file mode 100755
index 000000000000..1f2b642381d1
--- /dev/null
+++ b/tools/testing/selftests/ublk/test_stripe_04.sh
@@ -0,0 +1,24 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. "$(cd "$(dirname "$0")" && pwd)"/test_common.sh
+
+TID="stripe_04"
+ERR_CODE=0
+
+_prep_test "stripe" "mkfs & mount & umount on zero copy"
+
+backfile_0=$(_create_backfile 256M)
+backfile_1=$(_create_backfile 256M)
+dev_id=$(_add_ublk_dev -t stripe -z -q 2 "$backfile_0" "$backfile_1")
+_check_add_dev $TID $? "$backfile_0" "$backfile_1"
+
+_mkfs_mount_test /dev/ublkb"${dev_id}"
+ERR_CODE=$?
+
+_cleanup_test "stripe"
+
+_remove_backfile "$backfile_0"
+_remove_backfile "$backfile_1"
+
+_show_result $TID $ERR_CODE
diff --git a/tools/testing/selftests/vm/charge_reserved_hugetlb.sh b/tools/testing/selftests/vm/charge_reserved_hugetlb.sh
index 8e00276b4e69..dc3fc438b3d9 100644
--- a/tools/testing/selftests/vm/charge_reserved_hugetlb.sh
+++ b/tools/testing/selftests/vm/charge_reserved_hugetlb.sh
@@ -27,7 +27,7 @@ fi
 if [[ $cgroup2 ]]; then
   cgroup_path=$(mount -t cgroup2 | head -1 | awk '{print $3}')
   if [[ -z "$cgroup_path" ]]; then
-    cgroup_path=/dev/cgroup/memory
+    cgroup_path=$(mktemp -d)
     mount -t cgroup2 none $cgroup_path
     do_umount=1
   fi
@@ -35,7 +35,7 @@ if [[ $cgroup2 ]]; then
 else
   cgroup_path=$(mount -t cgroup | grep ",hugetlb" | awk '{print $3}')
   if [[ -z "$cgroup_path" ]]; then
-    cgroup_path=/dev/cgroup/memory
+    cgroup_path=$(mktemp -d)
     mount -t cgroup memory,hugetlb $cgroup_path
     do_umount=1
   fi
diff --git a/tools/testing/selftests/vm/hugetlb_reparenting_test.sh b/tools/testing/selftests/vm/hugetlb_reparenting_test.sh
index 14d26075c863..302f2c7003f0 100644
--- a/tools/testing/selftests/vm/hugetlb_reparenting_test.sh
+++ b/tools/testing/selftests/vm/hugetlb_reparenting_test.sh
@@ -22,7 +22,7 @@ fi
 if [[ $cgroup2 ]]; then
   CGROUP_ROOT=$(mount -t cgroup2 | head -1 | awk '{print $3}')
   if [[ -z "$CGROUP_ROOT" ]]; then
-    CGROUP_ROOT=/dev/cgroup/memory
+    CGROUP_ROOT=$(mktemp -d)
     mount -t cgroup2 none $CGROUP_ROOT
     do_umount=1
   fi