Merge branch 'psample-Add-additional-metadata-attributes'

Ido Schimmel says:

====================
psample: Add additional metadata attributes

This series extends the psample module to expose additional metadata to
user space for packets sampled via act_sample. The new metadata (e.g.,
transit delay) can then be consumed by applications such as hsflowd [1]
for better network observability.

netdevsim is extended with a dummy psample implementation that
periodically reports "sampled" packets to the psample module. In
addition to testing of the psample module, it enables the development
and demonstration of user space applications (e.g., hsflowd) that are
interested in the new metadata even without access to specialized
hardware (e.g., Spectrum ASIC) that can provide it.

mlxsw is also extended to provide the new metadata to psample.

A Wireshark dissector for psample netlink packets [2] will be submitted
upstream after the kernel patches are accepted. In addition, a libpcap
capture module for psample is currently in the works. Eventually, users
should be able to run:

 # tshark -i psample

In order to consume sampled packets along with their metadata.

Series overview:

Patch #1 makes it easier to extend the metadata provided to psample

Patch #2 adds the new metadata attributes to psample

Patch #3 extends netdevsim to periodically report "sampled" packets to
psample. Various debugfs knobs are added to control the reporting

Patch #4 adds a selftest over netdevsim

Patches #5-#10 gradually add support for the new metadata in mlxsw

Patch #11 adds a selftest over mlxsw

[1] https://sflow.org/draft4_sflow_transit.txt
[2] https://gitlab.com/amitcohen1/wireshark/-/commit/3d711143024e032aef1b056dd23f0266c54fab56
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 673 insertions, 0 deletions

diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh
new file mode 100755
index 000000000000..75d00104f291
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh
@@ -0,0 +1,492 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test that packets are sampled when tc-sample is used and that reported
+# metadata is correct. Two sets of hosts (with and without LAG) are used, since
+# metadata extraction in mlxsw is a bit different when LAG is involved.
+#
+# +---------------------------------+       +---------------------------------+
+# | H1 (vrf)                        |       | H3 (vrf)                        |
+# |    + $h1                        |       |    + $h3_lag                    |
+# |    | 192.0.2.1/28               |       |    | 192.0.2.17/28              |
+# |    |                            |       |    |                            |
+# |    |  default via 192.0.2.2     |       |    |  default via 192.0.2.18    |
+# +----|----------------------------+       +----|----------------------------+
+#      |                                         |
+# +----|-----------------------------------------|----------------------------+
+# |    | 192.0.2.2/28                            | 192.0.2.18/28              |
+# |    + $rp1                                    + $rp3_lag                   |
+# |                                                                           |
+# |    + $rp2                                    + $rp4_lag                   |
+# |    | 198.51.100.2/28                         | 198.51.100.18/28           |
+# +----|-----------------------------------------|----------------------------+
+#      |                                         |
+# +----|----------------------------+       +----|----------------------------+
+# |    |  default via 198.51.100.2  |       |    |  default via 198.51.100.18 |
+# |    |                            |       |    |                            |
+# |    | 198.51.100.1/28            |       |    | 198.51.100.17/28           |
+# |    + $h2                        |       |    + $h4_lag                    |
+# | H2 (vrf)                        |       | H4 (vrf)                        |
+# +---------------------------------+       +---------------------------------+
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+	tc_sample_rate_test
+	tc_sample_max_rate_test
+	tc_sample_group_conflict_test
+	tc_sample_md_iif_test
+	tc_sample_md_lag_iif_test
+	tc_sample_md_oif_test
+	tc_sample_md_lag_oif_test
+	tc_sample_md_out_tc_test
+	tc_sample_md_out_tc_occ_test
+"
+NUM_NETIFS=8
+CAPTURE_FILE=$(mktemp)
+source $lib_dir/lib.sh
+source $lib_dir/devlink_lib.sh
+
+# Available at https://github.com/Mellanox/libpsample
+require_command psample
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28
+
+	ip -4 route add default vrf v$h1 nexthop via 192.0.2.2
+}
+
+h1_destroy()
+{
+	ip -4 route del default vrf v$h1 nexthop via 192.0.2.2
+
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 198.51.100.1/28
+
+	ip -4 route add default vrf v$h2 nexthop via 198.51.100.2
+}
+
+h2_destroy()
+{
+	ip -4 route del default vrf v$h2 nexthop via 198.51.100.2
+
+	simple_if_fini $h2 198.51.100.1/28
+}
+
+h3_create()
+{
+	ip link set dev $h3 down
+	ip link add name ${h3}_bond type bond mode 802.3ad
+	ip link set dev $h3 master ${h3}_bond
+
+	simple_if_init ${h3}_bond 192.0.2.17/28
+
+	ip -4 route add default vrf v${h3}_bond nexthop via 192.0.2.18
+}
+
+h3_destroy()
+{
+	ip -4 route del default vrf v${h3}_bond nexthop via 192.0.2.18
+
+	simple_if_fini ${h3}_bond 192.0.2.17/28
+
+	ip link set dev $h3 nomaster
+	ip link del dev ${h3}_bond
+}
+
+h4_create()
+{
+	ip link set dev $h4 down
+	ip link add name ${h4}_bond type bond mode 802.3ad
+	ip link set dev $h4 master ${h4}_bond
+
+	simple_if_init ${h4}_bond 198.51.100.17/28
+
+	ip -4 route add default vrf v${h4}_bond nexthop via 198.51.100.18
+}
+
+h4_destroy()
+{
+	ip -4 route del default vrf v${h4}_bond nexthop via 198.51.100.18
+
+	simple_if_fini ${h4}_bond 198.51.100.17/28
+
+	ip link set dev $h4 nomaster
+	ip link del dev ${h4}_bond
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	__addr_add_del $rp1 add 192.0.2.2/28
+	tc qdisc add dev $rp1 clsact
+
+	ip link set dev $rp2 up
+	__addr_add_del $rp2 add 198.51.100.2/28
+	tc qdisc add dev $rp2 clsact
+
+	ip link add name ${rp3}_bond type bond mode 802.3ad
+	ip link set dev $rp3 master ${rp3}_bond
+	__addr_add_del ${rp3}_bond add 192.0.2.18/28
+	tc qdisc add dev $rp3 clsact
+	ip link set dev ${rp3}_bond up
+
+	ip link add name ${rp4}_bond type bond mode 802.3ad
+	ip link set dev $rp4 master ${rp4}_bond
+	__addr_add_del ${rp4}_bond add 198.51.100.18/28
+	tc qdisc add dev $rp4 clsact
+	ip link set dev ${rp4}_bond up
+}
+
+router_destroy()
+{
+	ip link set dev ${rp4}_bond down
+	tc qdisc del dev $rp4 clsact
+	__addr_add_del ${rp4}_bond del 198.51.100.18/28
+	ip link set dev $rp4 nomaster
+	ip link del dev ${rp4}_bond
+
+	ip link set dev ${rp3}_bond down
+	tc qdisc del dev $rp3 clsact
+	__addr_add_del ${rp3}_bond del 192.0.2.18/28
+	ip link set dev $rp3 nomaster
+	ip link del dev ${rp3}_bond
+
+	tc qdisc del dev $rp2 clsact
+	__addr_add_del $rp2 del 198.51.100.2/28
+	ip link set dev $rp2 down
+
+	tc qdisc del dev $rp1 clsact
+	__addr_add_del $rp1 del 192.0.2.2/28
+	ip link set dev $rp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+	h3=${NETIFS[p5]}
+	rp3=${NETIFS[p6]}
+	h4=${NETIFS[p7]}
+	rp4=${NETIFS[p8]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	h3_create
+	h4_create
+	router_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	rm -f $CAPTURE_FILE
+
+	router_destroy
+	h4_destroy
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+psample_capture_start()
+{
+	rm -f $CAPTURE_FILE
+
+	psample &> $CAPTURE_FILE &
+
+	sleep 1
+}
+
+psample_capture_stop()
+{
+	{ kill %% && wait %%; } 2>/dev/null
+}
+
+__tc_sample_rate_test()
+{
+	local desc=$1; shift
+	local dip=$1; shift
+	local pkts pct
+
+	RET=0
+
+	tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate 32 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	psample_capture_start
+
+	ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
+		-B $dip -t udp dp=52768,sp=42768 -q
+
+	psample_capture_stop
+
+	pkts=$(grep -e "group 1 " $CAPTURE_FILE | wc -l)
+	pct=$((100 * (pkts - 100) / 100))
+	(( -25 <= pct && pct <= 25))
+	check_err $? "Expected 100 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%"
+
+	log_test "tc sample rate ($desc)"
+
+	tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_rate_test()
+{
+	__tc_sample_rate_test "forward" 198.51.100.1
+	__tc_sample_rate_test "local receive" 192.0.2.2
+}
+
+tc_sample_max_rate_test()
+{
+	RET=0
+
+	tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate $((35 * 10 ** 8)) group 1
+	check_err $? "Failed to configure sampling rule with max rate"
+
+	tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+
+	tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate $((35 * 10 ** 8 + 1)) \
+		group 1 &> /dev/null
+	check_fail $? "Managed to configure sampling rate above maximum"
+
+	log_test "tc sample maximum rate"
+}
+
+tc_sample_group_conflict_test()
+{
+	RET=0
+
+	# Test that two sampling rules cannot be configured on the same port
+	# with different groups.
+
+	tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate 1024 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \
+		skip_sw action sample rate 1024 group 2 &> /dev/null
+	check_fail $? "Managed to configure sampling rule with conflicting group"
+
+	log_test "tc sample group conflict test"
+
+	tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_iif_test()
+{
+	local rp1_ifindex
+
+	RET=0
+
+	tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate 5 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	psample_capture_start
+
+	ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
+		-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
+
+	psample_capture_stop
+
+	rp1_ifindex=$(ip -j -p link show dev $rp1 | jq '.[]["ifindex"]')
+	grep -q -e "in-ifindex $rp1_ifindex " $CAPTURE_FILE
+	check_err $? "Sampled packets do not have expected in-ifindex"
+
+	log_test "tc sample iif"
+
+	tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_lag_iif_test()
+{
+	local rp3_ifindex
+
+	RET=0
+
+	tc filter add dev $rp3 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate 5 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	psample_capture_start
+
+	ip vrf exec v${h3}_bond $MZ ${h3}_bond -c 3200 -d 1msec -p 64 \
+		-A 192.0.2.17 -B 198.51.100.17 -t udp dp=52768,sp=42768 -q
+
+	psample_capture_stop
+
+	rp3_ifindex=$(ip -j -p link show dev $rp3 | jq '.[]["ifindex"]')
+	grep -q -e "in-ifindex $rp3_ifindex " $CAPTURE_FILE
+	check_err $? "Sampled packets do not have expected in-ifindex"
+
+	log_test "tc sample lag iif"
+
+	tc filter del dev $rp3 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_oif_test()
+{
+	local rp2_ifindex
+
+	RET=0
+
+	tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate 5 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	psample_capture_start
+
+	ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
+		-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
+
+	psample_capture_stop
+
+	rp2_ifindex=$(ip -j -p link show dev $rp2 | jq '.[]["ifindex"]')
+	grep -q -e "out-ifindex $rp2_ifindex " $CAPTURE_FILE
+	check_err $? "Sampled packets do not have expected out-ifindex"
+
+	log_test "tc sample oif"
+
+	tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_lag_oif_test()
+{
+	local rp4_ifindex
+
+	RET=0
+
+	tc filter add dev $rp3 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate 5 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	psample_capture_start
+
+	ip vrf exec v${h3}_bond $MZ ${h3}_bond -c 3200 -d 1msec -p 64 \
+		-A 192.0.2.17 -B 198.51.100.17 -t udp dp=52768,sp=42768 -q
+
+	psample_capture_stop
+
+	rp4_ifindex=$(ip -j -p link show dev $rp4 | jq '.[]["ifindex"]')
+	grep -q -e "out-ifindex $rp4_ifindex " $CAPTURE_FILE
+	check_err $? "Sampled packets do not have expected out-ifindex"
+
+	log_test "tc sample lag oif"
+
+	tc filter del dev $rp3 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_out_tc_test()
+{
+	RET=0
+
+	# Output traffic class is not supported on Spectrum-1.
+	[[ "$DEVLINK_VIDDID" == "15b3:cb84" ]] && return
+
+	tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate 5 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	# By default, all the packets should go to the same traffic class (0).
+
+	psample_capture_start
+
+	ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
+		-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
+
+	psample_capture_stop
+
+	grep -q -e "out-tc 0 " $CAPTURE_FILE
+	check_err $? "Sampled packets do not have expected out-tc (0)"
+
+	# Map all priorities to highest traffic class (7) and check reported
+	# out-tc.
+	tc qdisc replace dev $rp2 root handle 1: \
+		prio bands 3 priomap 0 0 0 0 0 0 0 0
+
+	psample_capture_start
+
+	ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
+		-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
+
+	psample_capture_stop
+
+	grep -q -e "out-tc 7 " $CAPTURE_FILE
+	check_err $? "Sampled packets do not have expected out-tc (7)"
+
+	log_test "tc sample out-tc"
+
+	tc qdisc del dev $rp2 root handle 1:
+	tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_out_tc_occ_test()
+{
+	local backlog pct occ
+
+	RET=0
+
+	# Output traffic class occupancy is not supported on Spectrum-1.
+	[[ "$DEVLINK_VIDDID" == "15b3:cb84" ]] && return
+
+	tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+		skip_sw action sample rate 1024 group 1
+	check_err $? "Failed to configure sampling rule"
+
+	# Configure a shaper on egress to create congestion.
+	tc qdisc replace dev $rp2 root handle 1: \
+		tbf rate 1Mbit burst 256k limit 1M
+
+	psample_capture_start
+
+	ip vrf exec v$h1 $MZ $h1 -c 0 -d 1usec -p 1400 -A 192.0.2.1 \
+		-B 198.51.100.1 -t udp dp=52768,sp=42768 -q &
+
+	# Allow congestion to reach steady state.
+	sleep 10
+
+	backlog=$(tc -j -p -s qdisc show dev $rp2 | jq '.[0]["backlog"]')
+
+	# Kill mausezahn.
+	{ kill %% && wait %%; } 2>/dev/null
+
+	psample_capture_stop
+
+	# Record last congestion sample.
+	occ=$(grep -e "out-tc-occ " $CAPTURE_FILE | tail -n 1 | \
+		cut -d ' ' -f 16)
+
+	pct=$((100 * (occ - backlog) / backlog))
+	(( -1 <= pct && pct <= 1))
+	check_err $? "Recorded a congestion of $backlog bytes, but sampled congestion is $occ bytes, which is $pct% off. Required accuracy is +-5%"
+
+	log_test "tc sample out-tc-occ"
+
+	tc qdisc del dev $rp2 root handle 1:
+	tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/netdevsim/psample.sh b/tools/testing/selftests/drivers/net/netdevsim/psample.sh
new file mode 100755
index 000000000000..ee10b1a8933c
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/psample.sh
@@ -0,0 +1,181 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# This test is for checking the psample module. It makes use of netdevsim
+# which periodically generates "sampled" packets.
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+	psample_enable_test
+	psample_group_num_test
+	psample_md_test
+"
+NETDEVSIM_PATH=/sys/bus/netdevsim/
+DEV_ADDR=1337
+DEV=netdevsim${DEV_ADDR}
+DEVLINK_DEV=netdevsim/${DEV}
+SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/
+PSAMPLE_DIR=/sys/kernel/debug/netdevsim/$DEV/psample/
+CAPTURE_FILE=$(mktemp)
+NUM_NETIFS=0
+source $lib_dir/lib.sh
+source $lib_dir/devlink_lib.sh
+
+# Available at https://github.com/Mellanox/libpsample
+require_command psample
+
+psample_capture()
+{
+	rm -f $CAPTURE_FILE
+
+	timeout 2 ip netns exec testns1 psample &> $CAPTURE_FILE
+}
+
+psample_enable_test()
+{
+	RET=0
+
+	echo 1 > $PSAMPLE_DIR/enable
+	check_err $? "Failed to enable sampling when should not"
+
+	echo 1 > $PSAMPLE_DIR/enable 2>/dev/null
+	check_fail $? "Sampling enablement succeeded when should fail"
+
+	psample_capture
+	if [ $(cat $CAPTURE_FILE | wc -l) -eq 0 ]; then
+		check_err 1 "Failed to capture sampled packets"
+	fi
+
+	echo 0 > $PSAMPLE_DIR/enable
+	check_err $? "Failed to disable sampling when should not"
+
+	echo 0 > $PSAMPLE_DIR/enable 2>/dev/null
+	check_fail $? "Sampling disablement succeeded when should fail"
+
+	psample_capture
+	if [ $(cat $CAPTURE_FILE | wc -l) -ne 0 ]; then
+		check_err 1 "Captured sampled packets when should not"
+	fi
+
+	log_test "psample enable / disable"
+}
+
+psample_group_num_test()
+{
+	RET=0
+
+	echo 1234 > $PSAMPLE_DIR/group_num
+	echo 1 > $PSAMPLE_DIR/enable
+
+	psample_capture
+	grep -q -e "group 1234" $CAPTURE_FILE
+	check_err $? "Sampled packets reported with wrong group number"
+
+	# New group number should only be used after disable / enable.
+	echo 4321 > $PSAMPLE_DIR/group_num
+
+	psample_capture
+	grep -q -e "group 4321" $CAPTURE_FILE
+	check_fail $? "Group number changed while sampling is active"
+
+	echo 0 > $PSAMPLE_DIR/enable && echo 1 > $PSAMPLE_DIR/enable
+
+	psample_capture
+	grep -q -e "group 4321" $CAPTURE_FILE
+	check_err $? "Group number did not change after restarting sampling"
+
+	log_test "psample group number"
+
+	echo 0 > $PSAMPLE_DIR/enable
+}
+
+psample_md_test()
+{
+	RET=0
+
+	echo 1 > $PSAMPLE_DIR/enable
+
+	echo 1234 > $PSAMPLE_DIR/in_ifindex
+	echo 4321 > $PSAMPLE_DIR/out_ifindex
+	psample_capture
+
+	grep -q -e "in-ifindex 1234" $CAPTURE_FILE
+	check_err $? "Sampled packets reported with wrong in-ifindex"
+
+	grep -q -e "out-ifindex 4321" $CAPTURE_FILE
+	check_err $? "Sampled packets reported with wrong out-ifindex"
+
+	echo 5 > $PSAMPLE_DIR/out_tc
+	psample_capture
+
+	grep -q -e "out-tc 5" $CAPTURE_FILE
+	check_err $? "Sampled packets reported with wrong out-tc"
+
+	echo $((2**16 - 1)) > $PSAMPLE_DIR/out_tc
+	psample_capture
+
+	grep -q -e "out-tc " $CAPTURE_FILE
+	check_fail $? "Sampled packets reported with out-tc when should not"
+
+	echo 1 > $PSAMPLE_DIR/out_tc
+	echo 10000 > $PSAMPLE_DIR/out_tc_occ_max
+	psample_capture
+
+	grep -q -e "out-tc-occ " $CAPTURE_FILE
+	check_err $? "Sampled packets not reported with out-tc-occ when should"
+
+	echo 0 > $PSAMPLE_DIR/out_tc_occ_max
+	psample_capture
+
+	grep -q -e "out-tc-occ " $CAPTURE_FILE
+	check_fail $? "Sampled packets reported with out-tc-occ when should not"
+
+	echo 10000 > $PSAMPLE_DIR/latency_max
+	psample_capture
+
+	grep -q -e "latency " $CAPTURE_FILE
+	check_err $? "Sampled packets not reported with latency when should"
+
+	echo 0 > $PSAMPLE_DIR/latency_max
+	psample_capture
+
+	grep -q -e "latency " $CAPTURE_FILE
+	check_fail $? "Sampled packets reported with latency when should not"
+
+	log_test "psample metadata"
+
+	echo 0 > $PSAMPLE_DIR/enable
+}
+
+setup_prepare()
+{
+	modprobe netdevsim &> /dev/null
+
+	echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device
+	while [ ! -d $SYSFS_NET_DIR ] ; do :; done
+
+	set -e
+
+	ip netns add testns1
+	devlink dev reload $DEVLINK_DEV netns testns1
+
+	set +e
+}
+
+cleanup()
+{
+	pre_cleanup
+	rm -f $CAPTURE_FILE
+	ip netns del testns1
+	echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device
+	modprobe -r netdevsim &> /dev/null
+}
+
+trap cleanup EXIT
+
+setup_prepare
+
+tests_run
+
+exit $EXIT_STATUS