diff options
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/common.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c | 597 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 35 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h | 27 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c | 30 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/hwif.h | 5 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 19 | ||||
| -rw-r--r-- | include/linux/stmmac.h | 1 |
12 files changed, 605 insertions, 120 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index cd36ff4da68c..684489156dce 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -29,6 +29,7 @@ /* Synopsys Core versions */ #define DWMAC_CORE_3_40 0x34 #define DWMAC_CORE_3_50 0x35 +#define DWMAC_CORE_3_70 0x37 #define DWMAC_CORE_4_00 0x40 #define DWMAC_CORE_4_10 0x41 #define DWMAC_CORE_5_00 0x50 diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c index 9e40c28d453a..bfe6e2d631bd 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c @@ -8,15 +8,90 @@ #include <linux/device.h> #include <linux/of_irq.h> #include "stmmac.h" +#include "dwmac_dma.h" +#include "dwmac1000.h" + +/* Normal Loongson Tx Summary */ +#define DMA_INTR_ENA_NIE_TX_LOONGSON 0x00040000 +/* Normal Loongson Rx Summary */ +#define DMA_INTR_ENA_NIE_RX_LOONGSON 0x00020000 + +#define DMA_INTR_NORMAL_LOONGSON (DMA_INTR_ENA_NIE_TX_LOONGSON | \ + DMA_INTR_ENA_NIE_RX_LOONGSON | \ + DMA_INTR_ENA_RIE | DMA_INTR_ENA_TIE) + +/* Abnormal Loongson Tx Summary */ +#define DMA_INTR_ENA_AIE_TX_LOONGSON 0x00010000 +/* Abnormal Loongson Rx Summary */ +#define DMA_INTR_ENA_AIE_RX_LOONGSON 0x00008000 + +#define DMA_INTR_ABNORMAL_LOONGSON (DMA_INTR_ENA_AIE_TX_LOONGSON | \ + DMA_INTR_ENA_AIE_RX_LOONGSON | \ + DMA_INTR_ENA_FBE | DMA_INTR_ENA_UNE) + +#define DMA_INTR_DEFAULT_MASK_LOONGSON (DMA_INTR_NORMAL_LOONGSON | \ + DMA_INTR_ABNORMAL_LOONGSON) + +/* Normal Loongson Tx Interrupt Summary */ +#define DMA_STATUS_NIS_TX_LOONGSON 0x00040000 +/* Normal Loongson Rx Interrupt Summary */ +#define DMA_STATUS_NIS_RX_LOONGSON 0x00020000 + +/* Abnormal Loongson Tx Interrupt Summary */ +#define DMA_STATUS_AIS_TX_LOONGSON 0x00010000 +/* Abnormal Loongson Rx Interrupt Summary */ +#define DMA_STATUS_AIS_RX_LOONGSON 0x00008000 + +/* Fatal Loongson Tx Bus Error Interrupt */ +#define DMA_STATUS_FBI_TX_LOONGSON 0x00002000 +/* Fatal Loongson Rx Bus Error Interrupt */ +#define DMA_STATUS_FBI_RX_LOONGSON 0x00001000 + +#define DMA_STATUS_MSK_COMMON_LOONGSON (DMA_STATUS_NIS_TX_LOONGSON | \ + DMA_STATUS_NIS_RX_LOONGSON | \ + DMA_STATUS_AIS_TX_LOONGSON | \ + DMA_STATUS_AIS_RX_LOONGSON | \ + DMA_STATUS_FBI_TX_LOONGSON | \ + DMA_STATUS_FBI_RX_LOONGSON) + +#define DMA_STATUS_MSK_RX_LOONGSON (DMA_STATUS_ERI | DMA_STATUS_RWT | \ + DMA_STATUS_RPS | DMA_STATUS_RU | \ + DMA_STATUS_RI | DMA_STATUS_OVF | \ + DMA_STATUS_MSK_COMMON_LOONGSON) + +#define DMA_STATUS_MSK_TX_LOONGSON (DMA_STATUS_ETI | DMA_STATUS_UNF | \ + DMA_STATUS_TJT | DMA_STATUS_TU | \ + DMA_STATUS_TPS | DMA_STATUS_TI | \ + DMA_STATUS_MSK_COMMON_LOONGSON) + +#define PCI_DEVICE_ID_LOONGSON_GMAC 0x7a03 +#define PCI_DEVICE_ID_LOONGSON_GNET 0x7a13 +#define DWMAC_CORE_LS_MULTICHAN 0x10 /* Loongson custom ID */ +#define CHANNEL_NUM 8 + +struct loongson_data { + u32 loongson_id; + struct device *dev; +}; + +struct stmmac_pci_info { + int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat); +}; -static int loongson_default_data(struct plat_stmmacenet_data *plat) +static void loongson_default_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) { + /* Get bus_id, this can be overwritten later */ + plat->bus_id = pci_dev_id(pdev); + plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */ plat->has_gmac = 1; plat->force_sf_dma_mode = 1; /* Set default value for multicast hash bins */ - plat->multicast_filter_bins = HASH_TABLE_SIZE; + plat->multicast_filter_bins = 256; + + plat->mac_interface = PHY_INTERFACE_MODE_NA; /* Set default value for unicast filter entries */ plat->unicast_filter_entries = 1; @@ -24,10 +99,6 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat) /* Set the maxmtu to a default of JUMBO_LEN */ plat->maxmtu = JUMBO_LEN; - /* Set default number of RX and TX queues to use */ - plat->tx_queues_to_use = 1; - plat->rx_queues_to_use = 1; - /* Disable Priority config by default */ plat->tx_queues_cfg[0].use_prio = false; plat->rx_queues_cfg[0].use_prio = false; @@ -35,30 +106,424 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat) /* Disable RX queues routing by default */ plat->rx_queues_cfg[0].pkt_route = 0x0; + plat->clk_ref_rate = 125000000; + plat->clk_ptp_rate = 125000000; + /* Default to phy auto-detection */ plat->phy_addr = -1; plat->dma_cfg->pbl = 32; plat->dma_cfg->pblx8 = true; +} + +static int loongson_gmac_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + struct loongson_data *ld; + int i; + + ld = plat->bsp_priv; + + loongson_default_data(pdev, plat); + + if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN) { + plat->rx_queues_to_use = CHANNEL_NUM; + plat->tx_queues_to_use = CHANNEL_NUM; + + /* Only channel 0 supports checksum, + * so turn off checksum to enable multiple channels. + */ + for (i = 1; i < CHANNEL_NUM; i++) + plat->tx_queues_cfg[i].coe_unsupported = 1; + } else { + plat->tx_queues_to_use = 1; + plat->rx_queues_to_use = 1; + } + + plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID; - plat->multicast_filter_bins = 256; return 0; } -static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id) +static struct stmmac_pci_info loongson_gmac_pci_info = { + .setup = loongson_gmac_data, +}; + +static void loongson_gnet_fix_speed(void *priv, unsigned int speed, + unsigned int mode) { - struct plat_stmmacenet_data *plat; - struct stmmac_resources res; - struct device_node *np; - int ret, i, phy_mode; + struct loongson_data *ld = (struct loongson_data *)priv; + struct net_device *ndev = dev_get_drvdata(ld->dev); + struct stmmac_priv *ptr = netdev_priv(ndev); + + /* The integrated PHY has a weird problem with switching from the low + * speeds to 1000Mbps mode. The speedup procedure requires the PHY-link + * re-negotiation. + */ + if (speed == SPEED_1000) { + if (readl(ptr->ioaddr + MAC_CTRL_REG) & + GMAC_CONTROL_PS) + /* Word around hardware bug, restart autoneg */ + phy_restart_aneg(ndev->phydev); + } +} - np = dev_of_node(&pdev->dev); +static int loongson_gnet_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + struct loongson_data *ld; + int i; - if (!np) { - pr_info("dwmac_loongson_pci: No OF node\n"); - return -ENODEV; + ld = plat->bsp_priv; + + loongson_default_data(pdev, plat); + + if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN) { + plat->rx_queues_to_use = CHANNEL_NUM; + plat->tx_queues_to_use = CHANNEL_NUM; + + /* Only channel 0 supports checksum, + * so turn off checksum to enable multiple channels. + */ + for (i = 1; i < CHANNEL_NUM; i++) + plat->tx_queues_cfg[i].coe_unsupported = 1; + } else { + plat->tx_queues_to_use = 1; + plat->rx_queues_to_use = 1; } + plat->phy_interface = PHY_INTERFACE_MODE_GMII; + plat->mdio_bus_data->phy_mask = ~(u32)BIT(2); + plat->fix_mac_speed = loongson_gnet_fix_speed; + + return 0; +} + +static struct stmmac_pci_info loongson_gnet_pci_info = { + .setup = loongson_gnet_data, +}; + +static void loongson_dwmac_dma_init_channel(struct stmmac_priv *priv, + void __iomem *ioaddr, + struct stmmac_dma_cfg *dma_cfg, + u32 chan) +{ + int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl; + int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl; + u32 value; + + value = readl(ioaddr + DMA_CHAN_BUS_MODE(chan)); + + if (dma_cfg->pblx8) + value |= DMA_BUS_MODE_MAXPBL; + + value |= DMA_BUS_MODE_USP; + value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK); + value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT); + value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT); + + /* Set the Fixed burst mode */ + if (dma_cfg->fixed_burst) + value |= DMA_BUS_MODE_FB; + + /* Mixed Burst has no effect when fb is set */ + if (dma_cfg->mixed_burst) + value |= DMA_BUS_MODE_MB; + + if (dma_cfg->atds) + value |= DMA_BUS_MODE_ATDS; + + if (dma_cfg->aal) + value |= DMA_BUS_MODE_AAL; + + writel(value, ioaddr + DMA_CHAN_BUS_MODE(chan)); + + /* Mask interrupts by writing to CSR7 */ + writel(DMA_INTR_DEFAULT_MASK_LOONGSON, ioaddr + + DMA_CHAN_INTR_ENA(chan)); +} + +static int loongson_dwmac_dma_interrupt(struct stmmac_priv *priv, + void __iomem *ioaddr, + struct stmmac_extra_stats *x, + u32 chan, u32 dir) +{ + struct stmmac_pcpu_stats *stats = this_cpu_ptr(priv->xstats.pcpu_stats); + u32 abnor_intr_status; + u32 nor_intr_status; + u32 fb_intr_status; + u32 intr_status; + int ret = 0; + + /* read the status register (CSR5) */ + intr_status = readl(ioaddr + DMA_CHAN_STATUS(chan)); + + if (dir == DMA_DIR_RX) + intr_status &= DMA_STATUS_MSK_RX_LOONGSON; + else if (dir == DMA_DIR_TX) + intr_status &= DMA_STATUS_MSK_TX_LOONGSON; + + nor_intr_status = intr_status & (DMA_STATUS_NIS_TX_LOONGSON | + DMA_STATUS_NIS_RX_LOONGSON); + abnor_intr_status = intr_status & (DMA_STATUS_AIS_TX_LOONGSON | + DMA_STATUS_AIS_RX_LOONGSON); + fb_intr_status = intr_status & (DMA_STATUS_FBI_TX_LOONGSON | + DMA_STATUS_FBI_RX_LOONGSON); + + /* ABNORMAL interrupts */ + if (unlikely(abnor_intr_status)) { + if (unlikely(intr_status & DMA_STATUS_UNF)) { + ret = tx_hard_error_bump_tc; + x->tx_undeflow_irq++; + } + if (unlikely(intr_status & DMA_STATUS_TJT)) + x->tx_jabber_irq++; + if (unlikely(intr_status & DMA_STATUS_OVF)) + x->rx_overflow_irq++; + if (unlikely(intr_status & DMA_STATUS_RU)) + x->rx_buf_unav_irq++; + if (unlikely(intr_status & DMA_STATUS_RPS)) + x->rx_process_stopped_irq++; + if (unlikely(intr_status & DMA_STATUS_RWT)) + x->rx_watchdog_irq++; + if (unlikely(intr_status & DMA_STATUS_ETI)) + x->tx_early_irq++; + if (unlikely(intr_status & DMA_STATUS_TPS)) { + x->tx_process_stopped_irq++; + ret = tx_hard_error; + } + if (unlikely(fb_intr_status)) { + x->fatal_bus_error_irq++; + ret = tx_hard_error; + } + } + /* TX/RX NORMAL interrupts */ + if (likely(nor_intr_status)) { + if (likely(intr_status & DMA_STATUS_RI)) { + u32 value = readl(ioaddr + DMA_INTR_ENA); + /* to schedule NAPI on real RIE event. */ + if (likely(value & DMA_INTR_ENA_RIE)) { + u64_stats_update_begin(&stats->syncp); + u64_stats_inc(&stats->rx_normal_irq_n[chan]); + u64_stats_update_end(&stats->syncp); + ret |= handle_rx; + } + } + if (likely(intr_status & DMA_STATUS_TI)) { + u64_stats_update_begin(&stats->syncp); + u64_stats_inc(&stats->tx_normal_irq_n[chan]); + u64_stats_update_end(&stats->syncp); + ret |= handle_tx; + } + if (unlikely(intr_status & DMA_STATUS_ERI)) + x->rx_early_irq++; + } + /* Optional hardware blocks, interrupts should be disabled */ + if (unlikely(intr_status & + (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI))) + pr_warn("%s: unexpected status %08x\n", __func__, intr_status); + + /* Clear the interrupt by writing a logic 1 to the CSR5[19-0] */ + writel((intr_status & 0x7ffff), ioaddr + DMA_CHAN_STATUS(chan)); + + return ret; +} + +static struct mac_device_info *loongson_dwmac_setup(void *apriv) +{ + struct stmmac_priv *priv = apriv; + struct mac_device_info *mac; + struct stmmac_dma_ops *dma; + struct loongson_data *ld; + struct pci_dev *pdev; + + ld = priv->plat->bsp_priv; + pdev = to_pci_dev(priv->device); + + mac = devm_kzalloc(priv->device, sizeof(*mac), GFP_KERNEL); + if (!mac) + return NULL; + + dma = devm_kzalloc(priv->device, sizeof(*dma), GFP_KERNEL); + if (!dma) + return NULL; + + /* The Loongson GMAC and GNET devices are based on the DW GMAC + * v3.50a and v3.73a IP-cores. But the HW designers have changed the + * GMAC_VERSION.SNPSVER field to the custom 0x10 value on the + * network controllers with the multi-channels feature + * available to emphasize the differences: multiple DMA-channels, + * AV feature and GMAC_INT_STATUS CSR flags layout. Get back the + * original value so the correct HW-interface would be selected. + */ + if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN) { + priv->synopsys_id = DWMAC_CORE_3_70; + *dma = dwmac1000_dma_ops; + dma->init_chan = loongson_dwmac_dma_init_channel; + dma->dma_interrupt = loongson_dwmac_dma_interrupt; + mac->dma = dma; + } + + priv->dev->priv_flags |= IFF_UNICAST_FLT; + + /* Pre-initialize the respective "mac" fields as it's done in + * dwmac1000_setup() + */ + mac->pcsr = priv->ioaddr; + mac->multicast_filter_bins = priv->plat->multicast_filter_bins; + mac->unicast_filter_entries = priv->plat->unicast_filter_entries; + mac->mcast_bits_log2 = 0; + + if (mac->multicast_filter_bins) + mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins); + + /* Loongson GMAC doesn't support the flow control. LS2K2000 + * GNET doesn't support the half-duplex link mode. + */ + if (pdev->device == PCI_DEVICE_ID_LOONGSON_GMAC) { + mac->link.caps = MAC_10 | MAC_100 | MAC_1000; + } else { + if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN) + mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000; + else + mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10FD | MAC_100FD | MAC_1000FD; + } + + mac->link.duplex = GMAC_CONTROL_DM; + mac->link.speed10 = GMAC_CONTROL_PS; + mac->link.speed100 = GMAC_CONTROL_PS | GMAC_CONTROL_FES; + mac->link.speed1000 = 0; + mac->link.speed_mask = GMAC_CONTROL_PS | GMAC_CONTROL_FES; + mac->mii.addr = GMAC_MII_ADDR; + mac->mii.data = GMAC_MII_DATA; + mac->mii.addr_shift = 11; + mac->mii.addr_mask = 0x0000F800; + mac->mii.reg_shift = 6; + mac->mii.reg_mask = 0x000007C0; + mac->mii.clk_csr_shift = 2; + mac->mii.clk_csr_mask = GENMASK(5, 2); + + return mac; +} + +static int loongson_dwmac_msi_config(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat, + struct stmmac_resources *res) +{ + int i, ret, vecs; + + vecs = roundup_pow_of_two(CHANNEL_NUM * 2 + 1); + ret = pci_alloc_irq_vectors(pdev, vecs, vecs, PCI_IRQ_MSI); + if (ret < 0) { + dev_warn(&pdev->dev, "Failed to allocate MSI IRQs\n"); + return ret; + } + + res->irq = pci_irq_vector(pdev, 0); + + for (i = 0; i < plat->rx_queues_to_use; i++) { + res->rx_irq[CHANNEL_NUM - 1 - i] = + pci_irq_vector(pdev, 1 + i * 2); + } + + for (i = 0; i < plat->tx_queues_to_use; i++) { + res->tx_irq[CHANNEL_NUM - 1 - i] = + pci_irq_vector(pdev, 2 + i * 2); + } + + plat->flags |= STMMAC_FLAG_MULTI_MSI_EN; + + return 0; +} + +static void loongson_dwmac_msi_clear(struct pci_dev *pdev) +{ + pci_free_irq_vectors(pdev); +} + +static int loongson_dwmac_dt_config(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat, + struct stmmac_resources *res) +{ + struct device_node *np = dev_of_node(&pdev->dev); + int ret; + + plat->mdio_node = of_get_child_by_name(np, "mdio"); + if (plat->mdio_node) { + dev_info(&pdev->dev, "Found MDIO subnode\n"); + plat->mdio_bus_data->needs_reset = true; + } + + ret = of_alias_get_id(np, "ethernet"); + if (ret >= 0) + plat->bus_id = ret; + + res->irq = of_irq_get_byname(np, "macirq"); + if (res->irq < 0) { + dev_err(&pdev->dev, "IRQ macirq not found\n"); + ret = -ENODEV; + goto err_put_node; + } + + res->wol_irq = of_irq_get_byname(np, "eth_wake_irq"); + if (res->wol_irq < 0) { + dev_info(&pdev->dev, + "IRQ eth_wake_irq not found, using macirq\n"); + res->wol_irq = res->irq; + } + + res->lpi_irq = of_irq_get_byname(np, "eth_lpi"); + if (res->lpi_irq < 0) { + dev_err(&pdev->dev, "IRQ eth_lpi not found\n"); + ret = -ENODEV; + goto err_put_node; + } + + ret = device_get_phy_mode(&pdev->dev); + if (ret < 0) { + dev_err(&pdev->dev, "phy_mode not found\n"); + ret = -ENODEV; + goto err_put_node; + } + + plat->phy_interface = ret; + + return 0; + +err_put_node: + of_node_put(plat->mdio_node); + + return ret; +} + +static void loongson_dwmac_dt_clear(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + of_node_put(plat->mdio_node); +} + +static int loongson_dwmac_acpi_config(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat, + struct stmmac_resources *res) +{ + if (!pdev->irq) + return -EINVAL; + + res->irq = pdev->irq; + + return 0; +} + +static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct plat_stmmacenet_data *plat; + struct stmmac_pci_info *info; + struct stmmac_resources res; + struct loongson_data *ld; + int ret, i; + plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); if (!plat) return -ENOMEM; @@ -69,25 +534,23 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id if (!plat->mdio_bus_data) return -ENOMEM; - plat->mdio_node = of_get_child_by_name(np, "mdio"); - if (plat->mdio_node) { - dev_info(&pdev->dev, "Found MDIO subnode\n"); - plat->mdio_bus_data->needs_reset = true; - } - plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), GFP_KERNEL); - if (!plat->dma_cfg) { - ret = -ENOMEM; - goto err_put_node; - } + if (!plat->dma_cfg) + return -ENOMEM; + + ld = devm_kzalloc(&pdev->dev, sizeof(*ld), GFP_KERNEL); + if (!ld) + return -ENOMEM; /* Enable pci device */ ret = pci_enable_device(pdev); if (ret) { dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n", __func__); - goto err_put_node; + return ret; } + pci_set_master(pdev); + /* Get the base address of device */ for (i = 0; i < PCI_STD_NUM_BARS; i++) { if (pci_resource_len(pdev, i) == 0) @@ -98,59 +561,43 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id break; } - plat->bus_id = of_alias_get_id(np, "ethernet"); - if (plat->bus_id < 0) - plat->bus_id = pci_dev_id(pdev); - - phy_mode = device_get_phy_mode(&pdev->dev); - if (phy_mode < 0) { - dev_err(&pdev->dev, "phy_mode not found\n"); - ret = phy_mode; - goto err_disable_device; - } - - plat->phy_interface = phy_mode; - plat->mac_interface = PHY_INTERFACE_MODE_GMII; - - pci_set_master(pdev); - - loongson_default_data(plat); - pci_enable_msi(pdev); memset(&res, 0, sizeof(res)); res.addr = pcim_iomap_table(pdev)[0]; - res.irq = of_irq_get_byname(np, "macirq"); - if (res.irq < 0) { - dev_err(&pdev->dev, "IRQ macirq not found\n"); - ret = -ENODEV; - goto err_disable_msi; - } + plat->bsp_priv = ld; + plat->setup = loongson_dwmac_setup; + ld->dev = &pdev->dev; + ld->loongson_id = readl(res.addr + GMAC_VERSION) & 0xff; - res.wol_irq = of_irq_get_byname(np, "eth_wake_irq"); - if (res.wol_irq < 0) { - dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n"); - res.wol_irq = res.irq; - } + info = (struct stmmac_pci_info *)id->driver_data; + ret = info->setup(pdev, plat); + if (ret) + goto err_disable_device; - res.lpi_irq = of_irq_get_byname(np, "eth_lpi"); - if (res.lpi_irq < 0) { - dev_err(&pdev->dev, "IRQ eth_lpi not found\n"); - ret = -ENODEV; - goto err_disable_msi; - } + if (dev_of_node(&pdev->dev)) + ret = loongson_dwmac_dt_config(pdev, plat, &res); + else + ret = loongson_dwmac_acpi_config(pdev, plat, &res); + if (ret) + goto err_disable_device; + + /* Use the common MAC IRQ if per-channel MSIs allocation failed */ + if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN) + loongson_dwmac_msi_config(pdev, plat, &res); ret = stmmac_dvr_probe(&pdev->dev, plat, &res); if (ret) - goto err_disable_msi; + goto err_plat_clear; - return ret; + return 0; -err_disable_msi: - pci_disable_msi(pdev); +err_plat_clear: + if (dev_of_node(&pdev->dev)) + loongson_dwmac_dt_clear(pdev, plat); + if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN) + loongson_dwmac_msi_clear(pdev); err_disable_device: pci_disable_device(pdev); -err_put_node: - of_node_put(plat->mdio_node); return ret; } @@ -158,11 +605,18 @@ static void loongson_dwmac_remove(struct pci_dev *pdev) { struct net_device *ndev = dev_get_drvdata(&pdev->dev); struct stmmac_priv *priv = netdev_priv(ndev); + struct loongson_data *ld; int i; - of_node_put(priv->plat->mdio_node); + ld = priv->plat->bsp_priv; stmmac_dvr_remove(&pdev->dev); + if (dev_of_node(&pdev->dev)) + loongson_dwmac_dt_clear(pdev, priv->plat); + + if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN) + loongson_dwmac_msi_clear(pdev); + for (i = 0; i < PCI_STD_NUM_BARS; i++) { if (pci_resource_len(pdev, i) == 0) continue; @@ -170,7 +624,6 @@ static void loongson_dwmac_remove(struct pci_dev *pdev) break; } - pci_disable_msi(pdev); pci_disable_device(pdev); } @@ -213,7 +666,8 @@ static SIMPLE_DEV_PM_OPS(loongson_dwmac_pm_ops, loongson_dwmac_suspend, loongson_dwmac_resume); static const struct pci_device_id loongson_dwmac_id_table[] = { - { PCI_VDEVICE(LOONGSON, 0x7a03) }, + { PCI_DEVICE_DATA(LOONGSON, GMAC, &loongson_gmac_pci_info) }, + { PCI_DEVICE_DATA(LOONGSON, GNET, &loongson_gnet_pci_info) }, {} }; MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table); @@ -232,4 +686,5 @@ module_pci_driver(loongson_dwmac_driver); MODULE_DESCRIPTION("Loongson DWMAC PCI driver"); MODULE_AUTHOR("Qing Zhang <zhangqing@loongson.cn>"); +MODULE_AUTHOR("Yanteng Si <siyanteng@loongson.cn>"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c index e1b761dcfa1d..cc93f73a380e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c @@ -299,7 +299,7 @@ static int sun8i_dwmac_dma_reset(void __iomem *ioaddr) * Called from stmmac via stmmac_dma_ops->init */ static void sun8i_dwmac_dma_init(void __iomem *ioaddr, - struct stmmac_dma_cfg *dma_cfg, int atds) + struct stmmac_dma_cfg *dma_cfg) { writel(EMAC_RX_INT | EMAC_TX_INT, ioaddr + EMAC_INT_EN); writel(0x1FFFFFF, ioaddr + EMAC_INT_STA); @@ -395,7 +395,7 @@ static void sun8i_dwmac_dma_start_tx(struct stmmac_priv *priv, writel(v, ioaddr + EMAC_TX_CTL1); } -static void sun8i_dwmac_enable_dma_transmission(void __iomem *ioaddr) +static void sun8i_dwmac_enable_dma_transmission(void __iomem *ioaddr, u32 chan) { u32 v; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c index adccdd816ea9..118a22406a2e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c @@ -70,15 +70,17 @@ static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi) writel(value, ioaddr + DMA_AXI_BUS_MODE); } -static void dwmac1000_dma_init(void __iomem *ioaddr, - struct stmmac_dma_cfg *dma_cfg, int atds) +static void dwmac1000_dma_init_channel(struct stmmac_priv *priv, + void __iomem *ioaddr, + struct stmmac_dma_cfg *dma_cfg, u32 chan) { - u32 value = readl(ioaddr + DMA_BUS_MODE); int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl; int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl; + u32 value; - /* - * Set the DMA PBL (Programmable Burst Length) mode. + value = readl(ioaddr + DMA_CHAN_BUS_MODE(chan)); + + /* Set the DMA PBL (Programmable Burst Length) mode. * * Note: before stmmac core 3.50 this mode bit was 4xPBL, and * post 3.5 mode bit acts as 8*PBL. @@ -98,16 +100,16 @@ static void dwmac1000_dma_init(void __iomem *ioaddr, if (dma_cfg->mixed_burst) value |= DMA_BUS_MODE_MB; - if (atds) + if (dma_cfg->atds) value |= DMA_BUS_MODE_ATDS; if (dma_cfg->aal) value |= DMA_BUS_MODE_AAL; - writel(value, ioaddr + DMA_BUS_MODE); + writel(value, ioaddr + DMA_CHAN_BUS_MODE(chan)); /* Mask interrupts by writing to CSR7 */ - writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); + writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_CHAN_INTR_ENA(chan)); } static void dwmac1000_dma_init_rx(struct stmmac_priv *priv, @@ -116,7 +118,7 @@ static void dwmac1000_dma_init_rx(struct stmmac_priv *priv, dma_addr_t dma_rx_phy, u32 chan) { /* RX descriptor base address list must be written into DMA CSR3 */ - writel(lower_32_bits(dma_rx_phy), ioaddr + DMA_RCV_BASE_ADDR); + writel(lower_32_bits(dma_rx_phy), ioaddr + DMA_CHAN_RCV_BASE_ADDR(chan)); } static void dwmac1000_dma_init_tx(struct stmmac_priv *priv, @@ -125,7 +127,7 @@ static void dwmac1000_dma_init_tx(struct stmmac_priv *priv, dma_addr_t dma_tx_phy, u32 chan) { /* TX descriptor base address list must be written into DMA CSR4 */ - writel(lower_32_bits(dma_tx_phy), ioaddr + DMA_TX_BASE_ADDR); + writel(lower_32_bits(dma_tx_phy), ioaddr + DMA_CHAN_TX_BASE_ADDR(chan)); } static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz) @@ -153,7 +155,7 @@ static void dwmac1000_dma_operation_mode_rx(struct stmmac_priv *priv, void __iomem *ioaddr, int mode, u32 channel, int fifosz, u8 qmode) { - u32 csr6 = readl(ioaddr + DMA_CONTROL); + u32 csr6 = readl(ioaddr + DMA_CHAN_CONTROL(channel)); if (mode == SF_DMA_MODE) { pr_debug("GMAC: enable RX store and forward mode\n"); @@ -175,14 +177,14 @@ static void dwmac1000_dma_operation_mode_rx(struct stmmac_priv *priv, /* Configure flow control based on rx fifo size */ csr6 = dwmac1000_configure_fc(csr6, fifosz); - writel(csr6, ioaddr + DMA_CONTROL); + writel(csr6, ioaddr + DMA_CHAN_CONTROL(channel)); } static void dwmac1000_dma_operation_mode_tx(struct stmmac_priv *priv, void __iomem *ioaddr, int mode, u32 channel, int fifosz, u8 qmode) { - u32 csr6 = readl(ioaddr + DMA_CONTROL); + u32 csr6 = readl(ioaddr + DMA_CHAN_CONTROL(channel)); if (mode == SF_DMA_MODE) { pr_debug("GMAC: enable TX store and forward mode\n"); @@ -209,7 +211,7 @@ static void dwmac1000_dma_operation_mode_tx(struct stmmac_priv *priv, csr6 |= DMA_CONTROL_TTC_256; } - writel(csr6, ioaddr + DMA_CONTROL); + writel(csr6, ioaddr + DMA_CHAN_CONTROL(channel)); } static void dwmac1000_dump_dma_regs(struct stmmac_priv *priv, @@ -271,12 +273,12 @@ static int dwmac1000_get_hw_feature(void __iomem *ioaddr, static void dwmac1000_rx_watchdog(struct stmmac_priv *priv, void __iomem *ioaddr, u32 riwt, u32 queue) { - writel(riwt, ioaddr + DMA_RX_WATCHDOG); + writel(riwt, ioaddr + DMA_CHAN_RX_WATCHDOG(queue)); } const struct stmmac_dma_ops dwmac1000_dma_ops = { .reset = dwmac_dma_reset, - .init = dwmac1000_dma_init, + .init_chan = dwmac1000_dma_init_channel, .init_rx_chan = dwmac1000_dma_init_rx, .init_tx_chan = dwmac1000_dma_init_tx, .axi = dwmac1000_dma_axi, @@ -294,3 +296,4 @@ const struct stmmac_dma_ops dwmac1000_dma_ops = { .get_hw_feature = dwmac1000_get_hw_feature, .rx_watchdog = dwmac1000_rx_watchdog, }; +EXPORT_SYMBOL_GPL(dwmac1000_dma_ops); diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c index b402fb54f613..82957db47c99 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c @@ -19,7 +19,7 @@ #include "dwmac_dma.h" static void dwmac100_dma_init(void __iomem *ioaddr, - struct stmmac_dma_cfg *dma_cfg, int atds) + struct stmmac_dma_cfg *dma_cfg) { /* Enable Application Access by writing to DMA CSR0 */ writel(DMA_BUS_MODE_DEFAULT | (dma_cfg->pbl << DMA_BUS_MODE_PBL_SHIFT), diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c index 84d3a8551b03..e0165358c4ac 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c @@ -153,7 +153,7 @@ static void dwmac410_dma_init_channel(struct stmmac_priv *priv, } static void dwmac4_dma_init(void __iomem *ioaddr, - struct stmmac_dma_cfg *dma_cfg, int atds) + struct stmmac_dma_cfg *dma_cfg) { u32 value = readl(ioaddr + DMA_SYS_BUS_MODE); diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h index 72672391675f..5d9c18f5bbf5 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h @@ -22,6 +22,31 @@ #define DMA_INTR_ENA 0x0000101c /* Interrupt Enable */ #define DMA_MISSED_FRAME_CTR 0x00001020 /* Missed Frame Counter */ +/* Following DMA defines are channels oriented */ +#define DMA_CHAN_BASE_OFFSET 0x100 + +static inline u32 dma_chan_base_addr(u32 base, u32 chan) +{ + return base + chan * DMA_CHAN_BASE_OFFSET; +} + +#define DMA_CHAN_BUS_MODE(chan) dma_chan_base_addr(DMA_BUS_MODE, chan) +#define DMA_CHAN_XMT_POLL_DEMAND(chan) \ + dma_chan_base_addr(DMA_XMT_POLL_DEMAND, chan) +#define DMA_CHAN_RCV_POLL_DEMAND(chan) \ + dma_chan_base_addr(DMA_RCV_POLL_DEMAND, chan) +#define DMA_CHAN_RCV_BASE_ADDR(chan) \ + dma_chan_base_addr(DMA_RCV_BASE_ADDR, chan) +#define DMA_CHAN_TX_BASE_ADDR(chan) \ + dma_chan_base_addr(DMA_TX_BASE_ADDR, chan) +#define DMA_CHAN_STATUS(chan) dma_chan_base_addr(DMA_STATUS, chan) +#define DMA_CHAN_CONTROL(chan) dma_chan_base_addr(DMA_CONTROL, chan) +#define DMA_CHAN_INTR_ENA(chan) dma_chan_base_addr(DMA_INTR_ENA, chan) +#define DMA_CHAN_MISSED_FRAME_CTR(chan) \ + dma_chan_base_addr(DMA_MISSED_FRAME_CTR, chan) +#define DMA_CHAN_RX_WATCHDOG(chan) \ + dma_chan_base_addr(DMA_RX_WATCHDOG, chan) + /* SW Reset */ #define DMA_BUS_MODE_SFT_RESET 0x00000001 /* Software Reset */ @@ -152,7 +177,7 @@ #define NUM_DWMAC1000_DMA_REGS 23 #define NUM_DWMAC4_DMA_REGS 27 -void dwmac_enable_dma_transmission(void __iomem *ioaddr); +void dwmac_enable_dma_transmission(void __iomem *ioaddr, u32 chan); void dwmac_enable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr, u32 chan, bool rx, bool tx); void dwmac_disable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr, diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c index 85e18f9a22f9..4846bf49c576 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c @@ -28,65 +28,65 @@ int dwmac_dma_reset(void __iomem *ioaddr) } /* CSR1 enables the transmit DMA to check for new descriptor */ -void dwmac_enable_dma_transmission(void __iomem *ioaddr) +void dwmac_enable_dma_transmission(void __iomem *ioaddr, u32 chan) { - writel(1, ioaddr + DMA_XMT_POLL_DEMAND); + writel(1, ioaddr + DMA_CHAN_XMT_POLL_DEMAND(chan)); } void dwmac_enable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr, u32 chan, bool rx, bool tx) { - u32 value = readl(ioaddr + DMA_INTR_ENA); + u32 value = readl(ioaddr + DMA_CHAN_INTR_ENA(chan)); if (rx) value |= DMA_INTR_DEFAULT_RX; if (tx) value |= DMA_INTR_DEFAULT_TX; - writel(value, ioaddr + DMA_INTR_ENA); + writel(value, ioaddr + DMA_CHAN_INTR_ENA(chan)); } void dwmac_disable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr, u32 chan, bool rx, bool tx) { - u32 value = readl(ioaddr + DMA_INTR_ENA); + u32 value = readl(ioaddr + DMA_CHAN_INTR_ENA(chan)); if (rx) value &= ~DMA_INTR_DEFAULT_RX; if (tx) value &= ~DMA_INTR_DEFAULT_TX; - writel(value, ioaddr + DMA_INTR_ENA); + writel(value, ioaddr + DMA_CHAN_INTR_ENA(chan)); } void dwmac_dma_start_tx(struct stmmac_priv *priv, void __iomem *ioaddr, u32 chan) { - u32 value = readl(ioaddr + DMA_CONTROL); + u32 value = readl(ioaddr + DMA_CHAN_CONTROL(chan)); value |= DMA_CONTROL_ST; - writel(value, ioaddr + DMA_CONTROL); + writel(value, ioaddr + DMA_CHAN_CONTROL(chan)); } void dwmac_dma_stop_tx(struct stmmac_priv *priv, void __iomem *ioaddr, u32 chan) { - u32 value = readl(ioaddr + DMA_CONTROL); + u32 value = readl(ioaddr + DMA_CHAN_CONTROL(chan)); value &= ~DMA_CONTROL_ST; - writel(value, ioaddr + DMA_CONTROL); + writel(value, ioaddr + DMA_CHAN_CONTROL(chan)); } void dwmac_dma_start_rx(struct stmmac_priv *priv, void __iomem *ioaddr, u32 chan) { - u32 value = readl(ioaddr + DMA_CONTROL); + u32 value = readl(ioaddr + DMA_CHAN_CONTROL(chan)); value |= DMA_CONTROL_SR; - writel(value, ioaddr + DMA_CONTROL); + writel(value, ioaddr + DMA_CHAN_CONTROL(chan)); } void dwmac_dma_stop_rx(struct stmmac_priv *priv, void __iomem *ioaddr, u32 chan) { - u32 value = readl(ioaddr + DMA_CONTROL); + u32 value = readl(ioaddr + DMA_CHAN_CONTROL(chan)); value &= ~DMA_CONTROL_SR; - writel(value, ioaddr + DMA_CONTROL); + writel(value, ioaddr + DMA_CHAN_CONTROL(chan)); } #ifdef DWMAC_DMA_DEBUG @@ -165,7 +165,7 @@ int dwmac_dma_interrupt(struct stmmac_priv *priv, void __iomem *ioaddr, struct stmmac_pcpu_stats *stats = this_cpu_ptr(priv->xstats.pcpu_stats); int ret = 0; /* read the status register (CSR5) */ - u32 intr_status = readl(ioaddr + DMA_STATUS); + u32 intr_status = readl(ioaddr + DMA_CHAN_STATUS(chan)); #ifdef DWMAC_DMA_DEBUG /* Enable it to monitor DMA rx/tx status in case of critical problems */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c index dd2ab6185c40..7840bc403788 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c @@ -20,7 +20,7 @@ static int dwxgmac2_dma_reset(void __iomem *ioaddr) } static void dwxgmac2_dma_init(void __iomem *ioaddr, - struct stmmac_dma_cfg *dma_cfg, int atds) + struct stmmac_dma_cfg *dma_cfg) { u32 value = readl(ioaddr + XGMAC_DMA_SYSBUS_MODE); diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h index e53c32362774..7e90f34b8c88 100644 --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h @@ -175,8 +175,7 @@ struct dma_features; struct stmmac_dma_ops { /* DMA core initialization */ int (*reset)(void __iomem *ioaddr); - void (*init)(void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg, - int atds); + void (*init)(void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg); void (*init_chan)(struct stmmac_priv *priv, void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg, u32 chan); void (*init_rx_chan)(struct stmmac_priv *priv, void __iomem *ioaddr, @@ -198,7 +197,7 @@ struct stmmac_dma_ops { /* To track extra statistic (if supported) */ void (*dma_diagnostic_fr)(struct stmmac_extra_stats *x, void __iomem *ioaddr); - void (*enable_dma_transmission) (void __iomem *ioaddr); + void (*enable_dma_transmission)(void __iomem *ioaddr, u32 chan); void (*enable_dma_irq)(struct stmmac_priv *priv, void __iomem *ioaddr, u32 chan, bool rx, bool tx); void (*disable_dma_irq)(struct stmmac_priv *priv, void __iomem *ioaddr, diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index f3a1b179aaea..d9fca8d1227c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2367,9 +2367,11 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv) if (txfifosz == 0) txfifosz = priv->dma_cap.tx_fifo_size; - /* Adjust for real per queue fifo size */ - rxfifosz /= rx_channels_count; - txfifosz /= tx_channels_count; + /* Split up the shared Tx/Rx FIFO memory on DW QoS Eth and DW XGMAC */ + if (priv->plat->has_gmac4 || priv->plat->has_xgmac) { + rxfifosz /= rx_channels_count; + txfifosz /= tx_channels_count; + } if (priv->plat->force_thresh_dma_mode) { txmode = tc; @@ -2553,7 +2555,7 @@ static bool stmmac_xdp_xmit_zc(struct stmmac_priv *priv, u32 queue, u32 budget) true, priv->mode, true, true, xdp_desc.len); - stmmac_enable_dma_transmission(priv, priv->ioaddr); + stmmac_enable_dma_transmission(priv, priv->ioaddr, queue); xsk_tx_metadata_to_compl(meta, &tx_q->tx_skbuff_dma[entry].xsk_meta); @@ -3003,7 +3005,6 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) struct stmmac_rx_queue *rx_q; struct stmmac_tx_queue *tx_q; u32 chan = 0; - int atds = 0; int ret = 0; if (!priv->plat->dma_cfg || !priv->plat->dma_cfg->pbl) { @@ -3012,7 +3013,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) } if (priv->extend_desc && (priv->mode == STMMAC_RING_MODE)) - atds = 1; + priv->plat->dma_cfg->atds = 1; ret = stmmac_reset(priv, priv->ioaddr); if (ret) { @@ -3021,7 +3022,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) } /* DMA Configuration */ - stmmac_dma_init(priv, priv->ioaddr, priv->plat->dma_cfg, atds); + stmmac_dma_init(priv, priv->ioaddr, priv->plat->dma_cfg); if (priv->plat->axi) stmmac_axi(priv, priv->ioaddr, priv->plat->axi); @@ -4754,7 +4755,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) netdev_tx_sent_queue(netdev_get_tx_queue(dev, queue), skb->len); - stmmac_enable_dma_transmission(priv, priv->ioaddr); + stmmac_enable_dma_transmission(priv, priv->ioaddr, queue); stmmac_flush_tx_descriptors(priv, queue); stmmac_tx_timer_arm(priv, queue); @@ -4981,7 +4982,7 @@ static int stmmac_xdp_xmit_xdpf(struct stmmac_priv *priv, int queue, u64_stats_update_end(&txq_stats->q_syncp); } - stmmac_enable_dma_transmission(priv, priv->ioaddr); + stmmac_enable_dma_transmission(priv, priv->ioaddr, queue); entry = STMMAC_GET_ENTRY(entry, priv->dma_conf.dma_tx_size); tx_q->cur_tx = entry; diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 84e13bd5df28..338991c08f00 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -100,6 +100,7 @@ struct stmmac_dma_cfg { bool eame; bool multi_msi_en; bool dche; + bool atds; }; #define AXI_BLEN 7 |