diff options
| -rw-r--r-- | drivers/tty/serial/8250/8250_dw.c | 9 |
1 files changed, 8 insertions, 1 deletions
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 964c268670ea..0ab558230370 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -51,6 +51,7 @@ #define DW_UART_QUIRK_APMC0D08 BIT(4) #define DW_UART_QUIRK_CPR_VALUE BIT(5) #define DW_UART_QUIRK_IER_KICK BIT(6) +#define DW_UART_QUIRK_SKIP_EMPTY_FIFO_READ BIT(7) /* * Number of consecutive IIR_NO_INT interrupts required to trigger interrupt @@ -436,7 +437,7 @@ static int dw8250_handle_irq(struct uart_port *p) * This problem has only been observed so far when not in DMA mode * so we limit the workaround only to non-DMA mode. */ - if (!up->dma && rx_timeout) { + if (!(quirks & DW_UART_QUIRK_SKIP_EMPTY_FIFO_READ) && !up->dma && rx_timeout) { status = serial_lsr_in(up); /* @@ -895,6 +896,11 @@ static const struct dw8250_platform_data dw8250_ultrarisc_dp1000_data = { .quirks = DW_UART_QUIRK_CPR_VALUE, }; +static const struct dw8250_platform_data dw8250_tda54 = { + .usr_reg = DW_UART_USR, + .quirks = DW_UART_QUIRK_SKIP_EMPTY_FIFO_READ, +}; + static const struct of_device_id dw8250_of_match[] = { { .compatible = "snps,dw-apb-uart", .data = &dw8250_dw_apb }, { .compatible = "cavium,octeon-3860-uart", .data = &dw8250_octeon_3860_data }, @@ -902,6 +908,7 @@ static const struct of_device_id dw8250_of_match[] = { { .compatible = "renesas,rzn1-uart", .data = &dw8250_renesas_rzn1_data }, { .compatible = "sophgo,sg2044-uart", .data = &dw8250_skip_set_rate_data }, { .compatible = "starfive,jh7100-uart", .data = &dw8250_skip_set_rate_data }, + { .compatible = "ti,tda54-uart", .data = &dw8250_tda54 }, { .compatible = "ultrarisc,dp1000-uart", .data = &dw8250_ultrarisc_dp1000_data }, { /* Sentinel */ } }; |