diff options
| -rw-r--r-- | drivers/iio/temperature/ltc2983.c | 30 |
1 files changed, 15 insertions, 15 deletions
diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c index 8b0b6b4884f6..fc904c0a42b4 100644 --- a/drivers/iio/temperature/ltc2983.c +++ b/drivers/iio/temperature/ltc2983.c @@ -699,7 +699,7 @@ ltc2983_thermocouple_new(const struct fwnode_handle *child, struct ltc2983_data if (!(thermo->sensor_config & LTC2983_THERMOCOUPLE_DIFF_MASK) && sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) return dev_err_ptr_probe(dev, -EINVAL, - "Invalid chann:%d for differential thermocouple\n", + "Invalid channel %d for differential thermocouple\n", sensor->chan); struct fwnode_handle *ref __free(fwnode_handle) = @@ -797,7 +797,7 @@ ltc2983_rtd_new(const struct fwnode_handle *child, struct ltc2983_data *st, /* * rtd channel indexes are a bit more complicated to validate. * For 4wire RTD with rotation, the channel selection cannot be - * >=19 since the chann + 1 is used in this configuration. + * >=19 since the channel + 1 is used in this configuration. * For 4wire RTDs with kelvin rsense, the rsense channel cannot be * <=1 since channel - 1 and channel - 2 are used. */ @@ -814,18 +814,18 @@ ltc2983_rtd_new(const struct fwnode_handle *child, struct ltc2983_data *st, (rtd->r_sense_chan <= min)) /* kelvin rsense*/ return dev_err_ptr_probe(dev, -EINVAL, - "Invalid rsense chann:%d to use in kelvin rsense\n", + "Invalid channel %d for kelvin rsense\n", rtd->r_sense_chan); if (sensor->chan < min || sensor->chan > max) return dev_err_ptr_probe(dev, -EINVAL, - "Invalid chann:%d for the rtd config\n", + "Invalid channel %d for RTD config\n", sensor->chan); } else { /* same as differential case */ if (sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) return dev_err_ptr_probe(dev, -EINVAL, - "Invalid chann:%d for RTD\n", + "Invalid channel %d for RTD\n", sensor->chan); } @@ -924,7 +924,7 @@ ltc2983_thermistor_new(const struct fwnode_handle *child, struct ltc2983_data *s if (!(thermistor->sensor_config & LTC2983_THERMISTOR_DIFF_MASK) && sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) return dev_err_ptr_probe(dev, -EINVAL, - "Invalid chann:%d for differential thermistor\n", + "Invalid channel %d for differential thermistor\n", sensor->chan); /* check custom sensor */ @@ -1039,7 +1039,7 @@ ltc2983_diode_new(const struct fwnode_handle *child, const struct ltc2983_data * if (!(diode->sensor_config & LTC2983_DIODE_DIFF_MASK) && sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) return dev_err_ptr_probe(dev, -EINVAL, - "Invalid chann:%d for differential thermistor\n", + "Invalid channel %d for differential diode\n", sensor->chan); /* set common parameters */ @@ -1093,7 +1093,7 @@ static struct ltc2983_sensor *ltc2983_r_sense_new(struct fwnode_handle *child, /* validate channel index */ if (sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) return dev_err_ptr_probe(dev, -EINVAL, - "Invalid chann:%d for r_sense\n", + "Invalid channel %d for r_sense\n", sensor->chan); ret = fwnode_property_read_u32(child, "adi,rsense-val-milli-ohms", &temp); @@ -1130,7 +1130,7 @@ static struct ltc2983_sensor *ltc2983_adc_new(struct fwnode_handle *child, if (!adc->single_ended && sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) return dev_err_ptr_probe(dev, -EINVAL, - "Invalid chan:%d for differential adc\n", + "Invalid channel %d for differential ADC\n", sensor->chan); /* set common parameters */ @@ -1156,7 +1156,7 @@ static struct ltc2983_sensor *ltc2983_temp_new(struct fwnode_handle *child, if (!temp->single_ended && sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) return dev_err_ptr_probe(dev, -EINVAL, - "Invalid chan:%d for differential temp\n", + "Invalid channel %d for differential temp\n", sensor->chan); temp->custom = __ltc2983_custom_sensor_new(st, child, "adi,custom-temp", @@ -1181,7 +1181,7 @@ static int ltc2983_chan_read(struct ltc2983_data *st, start_conversion = LTC2983_STATUS_START(true); start_conversion |= LTC2983_STATUS_CHAN_SEL(sensor->chan); - dev_dbg(dev, "Start conversion on chan:%d, status:%02X\n", + dev_dbg(dev, "Start conversion on channel:%d, status:%02X\n", sensor->chan, start_conversion); reinit_completion(&st->completion); /* start conversion */ @@ -1232,7 +1232,7 @@ static int ltc2983_read_raw(struct iio_dev *indio_dev, /* sanity check */ if (chan->address >= st->num_channels) { - dev_err(dev, "Invalid chan address:%ld", chan->address); + dev_err(dev, "Invalid channel address: %ld\n", chan->address); return -EINVAL; } @@ -1329,14 +1329,14 @@ static int ltc2983_parse_fw(struct ltc2983_data *st) if (sensor.chan < LTC2983_MIN_CHANNELS_NR || sensor.chan > st->info->max_channels_nr) return dev_err_probe(dev, -EINVAL, - "chan:%d must be from %u to %u\n", + "channel:%d must be from %u to %u\n", sensor.chan, LTC2983_MIN_CHANNELS_NR, st->info->max_channels_nr); if (channel_avail_mask & BIT(sensor.chan)) return dev_err_probe(dev, -EINVAL, - "chan:%d already in use\n", + "channel:%d already in use\n", sensor.chan); ret = fwnode_property_read_u32(child, "adi,sensor-type", &sensor.type); @@ -1344,7 +1344,7 @@ static int ltc2983_parse_fw(struct ltc2983_data *st) return dev_err_probe(dev, ret, "adi,sensor-type property must given for child nodes\n"); - dev_dbg(dev, "Create new sensor, type %u, chann %u", + dev_dbg(dev, "Create new sensor, type %u, channel %u", sensor.type, sensor.chan); if (sensor.type >= LTC2983_SENSOR_THERMOCOUPLE && |