diff options
26 files changed, 631 insertions, 576 deletions
diff --git a/drivers/net/netdevsim/netdev.c b/drivers/net/netdevsim/netdev.c index fa1d97885caa..6927c1962277 100644 --- a/drivers/net/netdevsim/netdev.c +++ b/drivers/net/netdevsim/netdev.c @@ -133,15 +133,21 @@ static netdev_tx_t nsim_start_xmit(struct sk_buff *skb, struct net_device *dev) if (!nsim_ipsec_tx(ns, skb)) goto out_drop_any; - peer_ns = rcu_dereference(ns->peer); - if (!peer_ns) - goto out_drop_any; + /* Check if loopback mode is enabled */ + if (dev->features & NETIF_F_LOOPBACK) { + peer_ns = ns; + peer_dev = dev; + } else { + peer_ns = rcu_dereference(ns->peer); + if (!peer_ns) + goto out_drop_any; + peer_dev = peer_ns->netdev; + } dr = nsim_do_psp(skb, ns, peer_ns, &psp_ext); if (dr) goto out_drop_free; - peer_dev = peer_ns->netdev; rxq = skb_get_queue_mapping(skb); if (rxq >= peer_dev->num_rx_queues) rxq = rxq % peer_dev->num_rx_queues; @@ -433,13 +439,8 @@ static int nsim_rcv(struct nsim_rq *rq, int budget) } /* skb might be discard at netif_receive_skb, save the len */ - skblen = skb->len; - skb_mark_napi_id(skb, &rq->napi); - ret = netif_receive_skb(skb); - if (ret == NET_RX_SUCCESS) - dev_dstats_rx_add(dev, skblen); - else - dev_dstats_rx_dropped(dev); + dev_dstats_rx_add(dev, skb->len); + napi_gro_receive(&rq->napi, skb); } nsim_start_peer_tx_queue(dev, rq); @@ -981,7 +982,8 @@ static void nsim_setup(struct net_device *dev) NETIF_F_FRAGLIST | NETIF_F_HW_CSUM | NETIF_F_LRO | - NETIF_F_TSO; + NETIF_F_TSO | + NETIF_F_LOOPBACK; dev->pcpu_stat_type = NETDEV_PCPU_STAT_DSTATS; dev->max_mtu = ETH_MAX_MTU; dev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_HW_OFFLOAD; diff --git a/tools/testing/selftests/drivers/net/.gitignore b/tools/testing/selftests/drivers/net/.gitignore index 585ecb4d5dc4..3633c7a3ed65 100644 --- a/tools/testing/selftests/drivers/net/.gitignore +++ b/tools/testing/selftests/drivers/net/.gitignore @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only +gro napi_id_helper psp_responder diff --git a/tools/testing/selftests/drivers/net/Makefile b/tools/testing/selftests/drivers/net/Makefile index 33f4816216ec..f5c71d993750 100644 --- a/tools/testing/selftests/drivers/net/Makefile +++ b/tools/testing/selftests/drivers/net/Makefile @@ -6,10 +6,12 @@ TEST_INCLUDES := $(wildcard lib/py/*.py) \ ../../net/lib.sh \ TEST_GEN_FILES := \ + gro \ napi_id_helper \ # end of TEST_GEN_FILES TEST_PROGS := \ + gro.py \ hds.py \ napi_id.py \ napi_threaded.py \ diff --git a/tools/testing/selftests/net/gro.c b/tools/testing/selftests/drivers/net/gro.c index cfc39f70635d..995b492f5bcb 100644 --- a/tools/testing/selftests/net/gro.c +++ b/tools/testing/selftests/drivers/net/gro.c @@ -57,7 +57,8 @@ #include <string.h> #include <unistd.h> -#include "../kselftest.h" +#include "../../kselftest.h" +#include "../../net/lib/ksft.h" #define DPORT 8000 #define SPORT 1500 @@ -1127,6 +1128,8 @@ static void gro_receiver(void) set_timeout(rxfd); bind_packetsocket(rxfd); + ksft_ready(); + memset(correct_payload, 0, sizeof(correct_payload)); if (strcmp(testname, "data") == 0) { diff --git a/tools/testing/selftests/drivers/net/gro.py b/tools/testing/selftests/drivers/net/gro.py new file mode 100755 index 000000000000..ba83713bf7b5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/gro.py @@ -0,0 +1,164 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +""" +GRO (Generic Receive Offload) conformance tests. + +Validates that GRO coalescing works correctly by running the gro +binary in different configurations and checking for correct packet +coalescing behavior. + +Test cases: + - data: Data packets with same size/headers and correct seq numbers coalesce + - ack: Pure ACK packets do not coalesce + - flags: Packets with PSH, SYN, URG, RST flags do not coalesce + - tcp: Packets with incorrect checksum, non-consecutive seqno don't coalesce + - ip: Packets with different ECN, TTL, TOS, or IP options don't coalesce + - large: Packets larger than GRO_MAX_SIZE don't coalesce +""" + +import os +from lib.py import ksft_run, ksft_exit, ksft_pr +from lib.py import NetDrvEpEnv, KsftXfailEx +from lib.py import cmd, defer, bkg, ip +from lib.py import ksft_variants + + +def _resolve_dmac(cfg, ipver): + """ + Find the destination MAC address remote host should use to send packets + towards the local host. It may be a router / gateway address. + """ + + attr = "dmac" + ipver + # Cache the response across test cases + if hasattr(cfg, attr): + return getattr(cfg, attr) + + route = ip(f"-{ipver} route get {cfg.addr_v[ipver]}", + json=True, host=cfg.remote)[0] + gw = route.get("gateway") + # Local L2 segment, address directly + if not gw: + setattr(cfg, attr, cfg.dev['address']) + return getattr(cfg, attr) + + # ping to make sure neighbor is resolved, + # bind to an interface, for v6 the GW is likely link local + cmd(f"ping -c1 -W0 -I{cfg.remote_ifname} {gw}", host=cfg.remote) + + neigh = ip(f"neigh get {gw} dev {cfg.remote_ifname}", + json=True, host=cfg.remote)[0] + setattr(cfg, attr, neigh['lladdr']) + return getattr(cfg, attr) + + +def _write_defer_restore(cfg, path, val, defer_undo=False): + with open(path, "r", encoding="utf-8") as fp: + orig_val = fp.read().strip() + if str(val) == orig_val: + return + with open(path, "w", encoding="utf-8") as fp: + fp.write(val) + if defer_undo: + defer(_write_defer_restore, cfg, path, orig_val) + + +def _set_mtu_restore(dev, mtu, host): + if dev['mtu'] < mtu: + ip(f"link set dev {dev['ifname']} mtu {mtu}", host=host) + defer(ip, f"link set dev {dev['ifname']} mtu {dev['mtu']}", host=host) + + +def _setup(cfg, test_name): + """ Setup hardware loopback mode for GRO testing. """ + + if not hasattr(cfg, "bin_remote"): + cfg.bin_local = cfg.test_dir / "gro" + cfg.bin_remote = cfg.remote.deploy(cfg.bin_local) + + # "large" test needs at least 4k MTU + if test_name == "large": + _set_mtu_restore(cfg.dev, 4096, None) + _set_mtu_restore(cfg.remote_dev, 4096, cfg.remote) + + flush_path = f"/sys/class/net/{cfg.ifname}/gro_flush_timeout" + irq_path = f"/sys/class/net/{cfg.ifname}/napi_defer_hard_irqs" + + _write_defer_restore(cfg, flush_path, "200000", defer_undo=True) + _write_defer_restore(cfg, irq_path, "10", defer_undo=True) + + try: + # Disable TSO for local tests + cfg.require_nsim() # will raise KsftXfailEx if not running on nsim + + cmd(f"ethtool -K {cfg.ifname} gro on tso off") + cmd(f"ethtool -K {cfg.remote_ifname} gro on tso off", host=cfg.remote) + except KsftXfailEx: + pass + +def _gro_variants(): + """Generator that yields all combinations of protocol and test types.""" + + for protocol in ["ipv4", "ipv6", "ipip"]: + for test_name in ["data", "ack", "flags", "tcp", "ip", "large"]: + yield protocol, test_name + + +@ksft_variants(_gro_variants()) +def test(cfg, protocol, test_name): + """Run a single GRO test with retries.""" + + ipver = "6" if protocol[-1] == "6" else "4" + cfg.require_ipver(ipver) + + _setup(cfg, test_name) + + base_cmd_args = [ + f"--{protocol}", + f"--dmac {_resolve_dmac(cfg, ipver)}", + f"--smac {cfg.remote_dev['address']}", + f"--daddr {cfg.addr_v[ipver]}", + f"--saddr {cfg.remote_addr_v[ipver]}", + f"--test {test_name}", + "--verbose" + ] + base_args = " ".join(base_cmd_args) + + # Each test is run 6 times to deflake, because given the receive timing, + # not all packets that should coalesce will be considered in the same flow + # on every try. + max_retries = 6 + for attempt in range(max_retries): + rx_cmd = f"{cfg.bin_local} {base_args} --rx --iface {cfg.ifname}" + tx_cmd = f"{cfg.bin_remote} {base_args} --iface {cfg.remote_ifname}" + + fail_now = attempt >= max_retries - 1 + + with bkg(rx_cmd, ksft_ready=True, exit_wait=True, + fail=fail_now) as rx_proc: + cmd(tx_cmd, host=cfg.remote) + + if rx_proc.ret == 0: + return + + ksft_pr(rx_proc.stdout.strip().replace('\n', '\n# ')) + ksft_pr(rx_proc.stderr.strip().replace('\n', '\n# ')) + + if test_name == "large" and os.environ.get("KSFT_MACHINE_SLOW"): + ksft_pr(f"Ignoring {protocol}/{test_name} failure due to slow environment") + return + + ksft_pr(f"Attempt {attempt + 1}/{max_retries} failed, retrying...") + + +def main() -> None: + """ Ksft boiler plate main """ + + with NetDrvEpEnv(__file__) as cfg: + ksft_run(cases=[test], args=(cfg,)) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/hw/.gitignore b/tools/testing/selftests/drivers/net/hw/.gitignore index 6942bf575497..46540468a775 100644 --- a/tools/testing/selftests/drivers/net/hw/.gitignore +++ b/tools/testing/selftests/drivers/net/hw/.gitignore @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only iou-zcrx ncdevmem +toeplitz diff --git a/tools/testing/selftests/drivers/net/hw/Makefile b/tools/testing/selftests/drivers/net/hw/Makefile index 8133d1a0051c..1760238e9d4f 100644 --- a/tools/testing/selftests/drivers/net/hw/Makefile +++ b/tools/testing/selftests/drivers/net/hw/Makefile @@ -1,6 +1,9 @@ # SPDX-License-Identifier: GPL-2.0+ OR MIT -TEST_GEN_FILES = iou-zcrx +TEST_GEN_FILES := \ + iou-zcrx \ + toeplitz \ +# end of TEST_GEN_FILES TEST_PROGS = \ csum.py \ @@ -21,6 +24,7 @@ TEST_PROGS = \ rss_ctx.py \ rss_flow_label.py \ rss_input_xfrm.py \ + toeplitz.py \ tso.py \ xsk_reconfig.py \ # diff --git a/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py b/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py index fb010a48a5a1..0c61debf86fb 100644 --- a/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py +++ b/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py @@ -25,7 +25,7 @@ try: fd_read_timeout, ip, rand_port, wait_port_listen, wait_file from net.lib.py import KsftSkipEx, KsftFailEx, KsftXfailEx from net.lib.py import ksft_disruptive, ksft_exit, ksft_pr, ksft_run, \ - ksft_setup + ksft_setup, ksft_variants, KsftNamedVariant from net.lib.py import ksft_eq, ksft_ge, ksft_in, ksft_is, ksft_lt, \ ksft_ne, ksft_not_in, ksft_raises, ksft_true, ksft_gt, ksft_not_none from drivers.net.lib.py import GenerateTraffic, Remote @@ -40,7 +40,7 @@ try: "wait_port_listen", "wait_file", "KsftSkipEx", "KsftFailEx", "KsftXfailEx", "ksft_disruptive", "ksft_exit", "ksft_pr", "ksft_run", - "ksft_setup", + "ksft_setup", "ksft_variants", "KsftNamedVariant", "ksft_eq", "ksft_ge", "ksft_in", "ksft_is", "ksft_lt", "ksft_ne", "ksft_not_in", "ksft_raises", "ksft_true", "ksft_gt", "ksft_not_none", "ksft_not_none", diff --git a/tools/testing/selftests/net/toeplitz.c b/tools/testing/selftests/drivers/net/hw/toeplitz.c index 9ba03164d73a..afc5f910b006 100644 --- a/tools/testing/selftests/net/toeplitz.c +++ b/tools/testing/selftests/drivers/net/hw/toeplitz.c @@ -52,7 +52,8 @@ #include <sys/types.h> #include <unistd.h> -#include "../kselftest.h" +#include "../../../kselftest.h" +#include "../../../net/lib/ksft.h" #define TOEPLITZ_KEY_MIN_LEN 40 #define TOEPLITZ_KEY_MAX_LEN 60 @@ -576,6 +577,10 @@ int main(int argc, char **argv) fd_sink = setup_sink(); setup_rings(); + + /* Signal to test framework that we're ready to receive */ + ksft_ready(); + process_rings(); cleanup_rings(); diff --git a/tools/testing/selftests/drivers/net/hw/toeplitz.py b/tools/testing/selftests/drivers/net/hw/toeplitz.py new file mode 100755 index 000000000000..9019a8c1ff62 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/toeplitz.py @@ -0,0 +1,209 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +""" +Toeplitz Rx hashing test: + - rxhash (the hash value calculation itself); + - RSS mapping from rxhash to rx queue; + - RPS mapping from rxhash to cpu. +""" + +import glob +import os +import socket +from lib.py import ksft_run, ksft_exit, ksft_pr +from lib.py import NetDrvEpEnv, EthtoolFamily, NetdevFamily +from lib.py import cmd, bkg, rand_port, defer +from lib.py import ksft_in +from lib.py import ksft_variants, KsftNamedVariant, KsftSkipEx, KsftFailEx + + +def _check_rps_and_rfs_not_configured(cfg): + """Verify that RPS is not already configured.""" + + for rps_file in glob.glob(f"/sys/class/net/{cfg.ifname}/queues/rx-*/rps_cpus"): + with open(rps_file, "r", encoding="utf-8") as fp: + val = fp.read().strip() + if set(val) - {"0", ","}: + raise KsftSkipEx(f"RPS already configured on {rps_file}: {val}") + + rfs_file = "/proc/sys/net/core/rps_sock_flow_entries" + with open(rfs_file, "r", encoding="utf-8") as fp: + val = fp.read().strip() + if val != "0": + raise KsftSkipEx(f"RFS already configured {rfs_file}: {val}") + + +def _get_rss_key(cfg): + """ + Read the RSS key from the device. + Return a string in the traditional %02x:%02x:%02x:.. format. + """ + + rss = cfg.ethnl.rss_get({"header": {"dev-index": cfg.ifindex}}) + return ':'.join(f'{b:02x}' for b in rss["hkey"]) + + +def _get_cpu_for_irq(irq): + with open(f"/proc/irq/{irq}/smp_affinity_list", "r", + encoding="utf-8") as fp: + data = fp.read().strip() + if "," in data or "-" in data: + raise KsftFailEx(f"IRQ{irq} is not mapped to a single core: {data}") + return int(data) + + +def _get_irq_cpus(cfg): + """ + Read the list of IRQs for the device Rx queues. + """ + queues = cfg.netnl.queue_get({"ifindex": cfg.ifindex}, dump=True) + napis = cfg.netnl.napi_get({"ifindex": cfg.ifindex}, dump=True) + + # Remap into ID-based dicts + napis = {n["id"]: n for n in napis} + queues = {f"{q['type']}{q['id']}": q for q in queues} + + cpus = [] + for rx in range(9999): + name = f"rx{rx}" + if name not in queues: + break + cpus.append(_get_cpu_for_irq(napis[queues[name]["napi-id"]]["irq"])) + + return cpus + + +def _get_unused_cpus(cfg, count=2): + """ + Get CPUs that are not used by Rx queues. + Returns a list of at least 'count' CPU numbers. + """ + + # Get CPUs used by Rx queues + rx_cpus = set(_get_irq_cpus(cfg)) + + # Get total number of CPUs + num_cpus = os.cpu_count() + + # Find unused CPUs + unused_cpus = [cpu for cpu in range(num_cpus) if cpu not in rx_cpus] + + if len(unused_cpus) < count: + raise KsftSkipEx(f"Need at {count} CPUs not used by Rx queues, found {len(unused_cpus)}") + + return unused_cpus[:count] + + +def _configure_rps(cfg, rps_cpus): + """Configure RPS for all Rx queues.""" + + mask = 0 + for cpu in rps_cpus: + mask |= (1 << cpu) + mask = hex(mask)[2:] + + # Set RPS bitmap for all rx queues + for rps_file in glob.glob(f"/sys/class/net/{cfg.ifname}/queues/rx-*/rps_cpus"): + with open(rps_file, "w", encoding="utf-8") as fp: + fp.write(mask) + + return mask + + +def _send_traffic(cfg, proto_flag, ipver, port): + """Send 20 packets of requested type.""" + + # Determine protocol and IP version for socat + if proto_flag == "-u": + proto = "UDP" + else: + proto = "TCP" + + baddr = f"[{cfg.addr_v['6']}]" if ipver == "6" else cfg.addr_v["4"] + + # Run socat in a loop to send traffic periodically + # Use sh -c with a loop similar to toeplitz_client.sh + socat_cmd = f""" + for i in `seq 20`; do + echo "msg $i" | socat -{ipver} -t 0.1 - {proto}:{baddr}:{port}; + sleep 0.001; + done + """ + + cmd(socat_cmd, shell=True, host=cfg.remote) + + +def _test_variants(): + for grp in ["", "rss", "rps"]: + for l4 in ["tcp", "udp"]: + for l3 in ["4", "6"]: + name = f"{l4}_ipv{l3}" + if grp: + name = f"{grp}_{name}" + yield KsftNamedVariant(name, "-" + l4[0], l3, grp) + + +@ksft_variants(_test_variants()) +def test(cfg, proto_flag, ipver, grp): + """Run a single toeplitz test.""" + + cfg.require_ipver(ipver) + + # Check that rxhash is enabled + ksft_in("receive-hashing: on", cmd(f"ethtool -k {cfg.ifname}").stdout) + + port = rand_port(socket.SOCK_DGRAM) + key = _get_rss_key(cfg) + + toeplitz_path = cfg.test_dir / "toeplitz" + rx_cmd = [ + str(toeplitz_path), + "-" + ipver, + proto_flag, + "-d", str(port), + "-i", cfg.ifname, + "-k", key, + "-T", "1000", + "-s", + "-v" + ] + + if grp: + _check_rps_and_rfs_not_configured(cfg) + if grp == "rss": + irq_cpus = ",".join([str(x) for x in _get_irq_cpus(cfg)]) + rx_cmd += ["-C", irq_cpus] + ksft_pr(f"RSS using CPUs: {irq_cpus}") + elif grp == "rps": + # Get CPUs not used by Rx queues and configure them for RPS + rps_cpus = _get_unused_cpus(cfg, count=2) + rps_mask = _configure_rps(cfg, rps_cpus) + defer(_configure_rps, cfg, []) + rx_cmd += ["-r", rps_mask] + ksft_pr(f"RPS using CPUs: {rps_cpus}, mask: {rps_mask}") + + # Run rx in background, it will exit once it has seen enough packets + with bkg(" ".join(rx_cmd), ksft_ready=True, exit_wait=True) as rx_proc: + while rx_proc.proc.poll() is None: + _send_traffic(cfg, proto_flag, ipver, port) + + # Check rx result + ksft_pr("Receiver output:") + ksft_pr(rx_proc.stdout.strip().replace('\n', '\n# ')) + if rx_proc.stderr: + ksft_pr(rx_proc.stderr.strip().replace('\n', '\n# ')) + + +def main() -> None: + """Ksft boilerplate main.""" + + with NetDrvEpEnv(__file__) as cfg: + cfg.ethnl = EthtoolFamily() + cfg.netnl = NetdevFamily() + ksft_run(cases=[test], args=(cfg,)) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/lib/py/__init__.py b/tools/testing/selftests/drivers/net/lib/py/__init__.py index b0c6300150fb..d9d035634a31 100644 --- a/tools/testing/selftests/drivers/net/lib/py/__init__.py +++ b/tools/testing/selftests/drivers/net/lib/py/__init__.py @@ -25,7 +25,7 @@ try: fd_read_timeout, ip, rand_port, wait_port_listen, wait_file from net.lib.py import KsftSkipEx, KsftFailEx, KsftXfailEx from net.lib.py import ksft_disruptive, ksft_exit, ksft_pr, ksft_run, \ - ksft_setup + ksft_setup, ksft_variants, KsftNamedVariant from net.lib.py import ksft_eq, ksft_ge, ksft_in, ksft_is, ksft_lt, \ ksft_ne, ksft_not_in, ksft_raises, ksft_true, ksft_gt, ksft_not_none @@ -38,7 +38,7 @@ try: "wait_port_listen", "wait_file", "KsftSkipEx", "KsftFailEx", "KsftXfailEx", "ksft_disruptive", "ksft_exit", "ksft_pr", "ksft_run", - "ksft_setup", + "ksft_setup", "ksft_variants", "KsftNamedVariant", "ksft_eq", "ksft_ge", "ksft_in", "ksft_is", "ksft_lt", "ksft_ne", "ksft_not_in", "ksft_raises", "ksft_true", "ksft_gt", "ksft_not_none", "ksft_not_none"] diff --git a/tools/testing/selftests/drivers/net/lib/py/env.py b/tools/testing/selftests/drivers/net/lib/py/env.py index 01be3d9b9720..8b644fd84ff2 100644 --- a/tools/testing/selftests/drivers/net/lib/py/env.py +++ b/tools/testing/selftests/drivers/net/lib/py/env.py @@ -168,6 +168,8 @@ class NetDrvEpEnv(NetDrvEnvBase): # resolve remote interface name self.remote_ifname = self.resolve_remote_ifc() + self.remote_dev = ip("-d link show dev " + self.remote_ifname, + host=self.remote, json=True)[0] self._required_cmd = {} diff --git a/tools/testing/selftests/drivers/net/xdp.py b/tools/testing/selftests/drivers/net/xdp.py index 834a37ae7d0d..e54df158dfe9 100755 --- a/tools/testing/selftests/drivers/net/xdp.py +++ b/tools/testing/selftests/drivers/net/xdp.py @@ -12,6 +12,7 @@ from dataclasses import dataclass from enum import Enum from lib.py import ksft_run, ksft_exit, ksft_eq, ksft_ge, ksft_ne, ksft_pr +from lib.py import KsftNamedVariant, ksft_variants from lib.py import KsftFailEx, NetDrvEpEnv from lib.py import EthtoolFamily, NetdevFamily, NlError from lib.py import bkg, cmd, rand_port, wait_port_listen @@ -672,7 +673,18 @@ def test_xdp_native_adjst_head_shrnk_data(cfg): _validate_res(res, offset_lst, pkt_sz_lst) -def _test_xdp_native_ifc_stats(cfg, act): +@ksft_variants([ + KsftNamedVariant("pass", XDPAction.PASS), + KsftNamedVariant("drop", XDPAction.DROP), + KsftNamedVariant("tx", XDPAction.TX), +]) +def test_xdp_native_qstats(cfg, act): + """ + Send 1000 messages. Expect XDP action specified in @act. + Make sure the packets were counted to interface level qstats + (Rx, and Tx if act is TX). + """ + cfg.require_cmd("socat") bpf_info = BPFProgInfo("xdp_prog", "xdp_native.bpf.o", "xdp", 1500) @@ -733,30 +745,6 @@ def _test_xdp_native_ifc_stats(cfg, act): ksft_ge(after['tx-packets'], before['tx-packets']) -def test_xdp_native_qstats_pass(cfg): - """ - Send 2000 messages, expect XDP_PASS, make sure the packets were counted - to interface level qstats (Rx). - """ - _test_xdp_native_ifc_stats(cfg, XDPAction.PASS) - - -def test_xdp_native_qstats_drop(cfg): - """ - Send 2000 messages, expect XDP_DROP, make sure the packets were counted - to interface level qstats (Rx). - """ - _test_xdp_native_ifc_stats(cfg, XDPAction.DROP) - - -def test_xdp_native_qstats_tx(cfg): - """ - Send 2000 messages, expect XDP_TX, make sure the packets were counted - to interface level qstats (Rx and Tx) - """ - _test_xdp_native_ifc_stats(cfg, XDPAction.TX) - - def main(): """ Main function to execute the XDP tests. @@ -781,9 +769,7 @@ def main(): test_xdp_native_adjst_tail_shrnk_data, test_xdp_native_adjst_head_grow_data, test_xdp_native_adjst_head_shrnk_data, - test_xdp_native_qstats_pass, - test_xdp_native_qstats_drop, - test_xdp_native_qstats_tx, + test_xdp_native_qstats, ], args=(cfg,)) ksft_exit() diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore index f627f1a2a2b8..283ca5ffc244 100644 --- a/tools/testing/selftests/net/.gitignore +++ b/tools/testing/selftests/net/.gitignore @@ -7,7 +7,6 @@ cmsg_sender diag_uid epoll_busy_poll fin_ack_lat -gro hwtstamp_config io_uring_zerocopy_tx ioam6_parser @@ -57,7 +56,6 @@ tcp_port_share tfo timestamping tls -toeplitz tools tun txring_overwrite diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index b5127e968108..b66ba04f19d9 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -38,7 +38,6 @@ TEST_PROGS := \ fq_band_pktlimit.sh \ gre_gso.sh \ gre_ipv6_lladdr.sh \ - gro.sh \ icmp.sh \ icmp_redirect.sh \ io_uring_zerocopy_tx.sh \ @@ -121,8 +120,6 @@ TEST_PROGS := \ # end of TEST_PROGS TEST_PROGS_EXTENDED := \ - toeplitz.sh \ - toeplitz_client.sh \ xfrm_policy_add_speed.sh \ # end of TEST_PROGS_EXTENDED @@ -130,7 +127,6 @@ TEST_GEN_FILES := \ bind_bhash \ cmsg_sender \ fin_ack_lat \ - gro \ hwtstamp_config \ io_uring_zerocopy_tx \ ioam6_parser \ @@ -159,7 +155,6 @@ TEST_GEN_FILES := \ tcp_mmap \ tfo \ timestamping \ - toeplitz \ txring_overwrite \ txtimestamp \ udpgso \ @@ -193,8 +188,6 @@ TEST_FILES := \ in_netns.sh \ lib.sh \ settings \ - setup_loopback.sh \ - setup_veth.sh \ # end of TEST_FILES # YNL files, must be before "include ..lib.mk" diff --git a/tools/testing/selftests/net/gro.sh b/tools/testing/selftests/net/gro.sh deleted file mode 100755 index 4c5144c6f652..000000000000 --- a/tools/testing/selftests/net/gro.sh +++ /dev/null @@ -1,105 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 - -readonly SERVER_MAC="aa:00:00:00:00:02" -readonly CLIENT_MAC="aa:00:00:00:00:01" -readonly TESTS=("data" "ack" "flags" "tcp" "ip" "large") -readonly PROTOS=("ipv4" "ipv6" "ipip") -dev="" -test="all" -proto="ipv4" - -run_test() { - local server_pid=0 - local exit_code=0 - local protocol=$1 - local test=$2 - local ARGS=( "--${protocol}" "--dmac" "${SERVER_MAC}" \ - "--smac" "${CLIENT_MAC}" "--test" "${test}" "--verbose" ) - - setup_ns - # Each test is run 6 times to deflake, because given the receive timing, - # not all packets that should coalesce will be considered in the same flow - # on every try. - for tries in {1..6}; do - # Actual test starts here - ip netns exec $server_ns ./gro "${ARGS[@]}" "--rx" "--iface" "server" \ - 1>>log.txt & - server_pid=$! - sleep 0.5 # to allow for socket init - ip netns exec $client_ns ./gro "${ARGS[@]}" "--iface" "client" \ - 1>>log.txt - wait "${server_pid}" - exit_code=$? - if [[ ${test} == "large" && -n "${KSFT_MACHINE_SLOW}" && \ - ${exit_code} -ne 0 ]]; then - echo "Ignoring errors due to slow environment" 1>&2 - exit_code=0 - fi - if [[ "${exit_code}" -eq 0 ]]; then - break; - fi - done - cleanup_ns - echo ${exit_code} -} - -run_all_tests() { - local failed_tests=() - for proto in "${PROTOS[@]}"; do - for test in "${TESTS[@]}"; do - echo "running test ${proto} ${test}" >&2 - exit_code=$(run_test $proto $test) - if [[ "${exit_code}" -ne 0 ]]; then - failed_tests+=("${proto}_${test}") - fi; - done; - done - if [[ ${#failed_tests[@]} -ne 0 ]]; then - echo "failed tests: ${failed_tests[*]}. \ - Please see log.txt for more logs" - exit 1 - else - echo "All Tests Succeeded!" - fi; -} - -usage() { - echo "Usage: $0 \ - [-i <DEV>] \ - [-t data|ack|flags|tcp|ip|large] \ - [-p <ipv4|ipv6>]" 1>&2; - exit 1; -} - -while getopts "i:t:p:" opt; do - case "${opt}" in - i) - dev="${OPTARG}" - ;; - t) - test="${OPTARG}" - ;; - p) - proto="${OPTARG}" - ;; - *) - usage - ;; - esac -done - -if [ -n "$dev" ]; then - source setup_loopback.sh -else - source setup_veth.sh -fi - -setup -trap cleanup EXIT -if [[ "${test}" == "all" ]]; then - run_all_tests -else - exit_code=$(run_test "${proto}" "${test}") - exit $exit_code -fi; diff --git a/tools/testing/selftests/net/lib/Makefile b/tools/testing/selftests/net/lib/Makefile index ce795bc0a1af..5339f56329e1 100644 --- a/tools/testing/selftests/net/lib/Makefile +++ b/tools/testing/selftests/net/lib/Makefile @@ -8,6 +8,7 @@ CFLAGS += -I../../ TEST_FILES := \ ../../../../net/ynl \ ../../../../../Documentation/netlink/specs \ + ksft_setup_loopback.sh \ # end of TEST_FILES TEST_GEN_FILES := \ diff --git a/tools/testing/selftests/net/lib/ksft_setup_loopback.sh b/tools/testing/selftests/net/lib/ksft_setup_loopback.sh new file mode 100755 index 000000000000..3defbb1919c5 --- /dev/null +++ b/tools/testing/selftests/net/lib/ksft_setup_loopback.sh @@ -0,0 +1,111 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Setup script for running ksft tests over a real interface in loopback mode. +# This scripts replaces the historical setup_loopback.sh. It puts +# a (presumably) real hardware interface into loopback mode, creates macvlan +# interfaces on top and places them in a network namespace for isolation. +# +# NETIF env variable must be exported to indicate the real target device. +# Note that the test will override NETIF with one of the macvlans, the +# actual ksft test will only see the macvlans. +# +# Example use: +# export NETIF=eth0 +# ./net/lib/ksft_setup_loopback.sh ./drivers/net/gro.py + +if [ -z "$NETIF" ]; then + echo "Error: NETIF variable not set" + exit 1 +fi +if ! [ -d "/sys/class/net/$NETIF" ]; then + echo "Error: Can't find $NETIF, invalid netdevice" + exit 1 +fi + +# Save original settings for cleanup +readonly FLUSH_PATH="/sys/class/net/${NETIF}/gro_flush_timeout" +readonly IRQ_PATH="/sys/class/net/${NETIF}/napi_defer_hard_irqs" +FLUSH_TIMEOUT="$(< "${FLUSH_PATH}")" +readonly FLUSH_TIMEOUT +HARD_IRQS="$(< "${IRQ_PATH}")" +readonly HARD_IRQS + +SERVER_NS=$(mktemp -u server-XXXXXXXX) +readonly SERVER_NS +CLIENT_NS=$(mktemp -u client-XXXXXXXX) +readonly CLIENT_NS +readonly SERVER_MAC="aa:00:00:00:00:02" +readonly CLIENT_MAC="aa:00:00:00:00:01" + +# ksft expects addresses to communicate with remote +export LOCAL_V6=2001:db8:1::1 +export REMOTE_V6=2001:db8:1::2 + +cleanup() { + local exit_code=$? + + echo "Cleaning up..." + + # Remove macvlan interfaces and namespaces + ip -netns "${SERVER_NS}" link del dev server 2>/dev/null || true + ip netns del "${SERVER_NS}" 2>/dev/null || true + ip -netns "${CLIENT_NS}" link del dev client 2>/dev/null || true + ip netns del "${CLIENT_NS}" 2>/dev/null || true + + # Disable loopback + ethtool -K "${NETIF}" loopback off 2>/dev/null || true + sleep 1 + + echo "${FLUSH_TIMEOUT}" >"${FLUSH_PATH}" + echo "${HARD_IRQS}" >"${IRQ_PATH}" + + exit $exit_code +} + +trap cleanup EXIT INT TERM + +# Enable loopback mode +echo "Enabling loopback on ${NETIF}..." +ethtool -K "${NETIF}" loopback on || { + echo "Failed to enable loopback mode" + exit 1 +} +# The interface may need time to get carrier back, but selftests +# will wait for carrier, so no need to wait / sleep here. + +# Use timer on host to trigger the network stack +# Also disable device interrupt to not depend on NIC interrupt +# Reduce test flakiness caused by unexpected interrupts +echo 100000 >"${FLUSH_PATH}" +echo 50 >"${IRQ_PATH}" + +# Create server namespace with macvlan +ip netns add "${SERVER_NS}" +ip link add link "${NETIF}" dev server address "${SERVER_MAC}" type macvlan +ip link set dev server netns "${SERVER_NS}" +ip -netns "${SERVER_NS}" link set dev server up +ip -netns "${SERVER_NS}" addr add $LOCAL_V6/64 dev server +ip -netns "${SERVER_NS}" link set dev lo up + +# Create client namespace with macvlan +ip netns add "${CLIENT_NS}" +ip link add link "${NETIF}" dev client address "${CLIENT_MAC}" type macvlan +ip link set dev client netns "${CLIENT_NS}" +ip -netns "${CLIENT_NS}" link set dev client up +ip -netns "${CLIENT_NS}" addr add $REMOTE_V6/64 dev client +ip -netns "${CLIENT_NS}" link set dev lo up + +echo "Setup complete!" +echo " Device: ${NETIF}" +echo " Server NS: ${SERVER_NS}" +echo " Client NS: ${CLIENT_NS}" +echo "" + +# Setup environment variables for tests +export NETIF=server +export REMOTE_TYPE=netns +export REMOTE_ARGS="${CLIENT_NS}" + +# Run the command +ip netns exec "${SERVER_NS}" "$@" diff --git a/tools/testing/selftests/net/lib/py/__init__.py b/tools/testing/selftests/net/lib/py/__init__.py index 97b7cf2b20eb..40f9ce307dd1 100644 --- a/tools/testing/selftests/net/lib/py/__init__.py +++ b/tools/testing/selftests/net/lib/py/__init__.py @@ -8,7 +8,8 @@ from .consts import KSRC from .ksft import KsftFailEx, KsftSkipEx, KsftXfailEx, ksft_pr, ksft_eq, \ ksft_ne, ksft_true, ksft_not_none, ksft_in, ksft_not_in, ksft_is, \ ksft_ge, ksft_gt, ksft_lt, ksft_raises, ksft_busy_wait, \ - ktap_result, ksft_disruptive, ksft_setup, ksft_run, ksft_exit + ktap_result, ksft_disruptive, ksft_setup, ksft_run, ksft_exit, \ + ksft_variants, KsftNamedVariant from .netns import NetNS, NetNSEnter from .nsim import NetdevSim, NetdevSimDev from .utils import CmdExitFailure, fd_read_timeout, cmd, bkg, defer, \ @@ -21,7 +22,7 @@ __all__ = ["KSRC", "ksft_ne", "ksft_true", "ksft_not_none", "ksft_in", "ksft_not_in", "ksft_is", "ksft_ge", "ksft_gt", "ksft_lt", "ksft_raises", "ksft_busy_wait", "ktap_result", "ksft_disruptive", "ksft_setup", - "ksft_run", "ksft_exit", + "ksft_run", "ksft_exit", "ksft_variants", "KsftNamedVariant", "NetNS", "NetNSEnter", "CmdExitFailure", "fd_read_timeout", "cmd", "bkg", "defer", "bpftool", "ip", "ethtool", "bpftrace", "rand_port", diff --git a/tools/testing/selftests/net/lib/py/ksft.py b/tools/testing/selftests/net/lib/py/ksft.py index 83b1574f7719..ebd82940ee50 100644 --- a/tools/testing/selftests/net/lib/py/ksft.py +++ b/tools/testing/selftests/net/lib/py/ksft.py @@ -1,12 +1,12 @@ # SPDX-License-Identifier: GPL-2.0 -import builtins import functools import inspect import signal import sys import time import traceback +from collections import namedtuple from .consts import KSFT_MAIN_NAME from .utils import global_defer_queue @@ -136,7 +136,7 @@ def ksft_busy_wait(cond, sleep=0.005, deadline=1, comment=""): time.sleep(sleep) -def ktap_result(ok, cnt=1, case="", comment=""): +def ktap_result(ok, cnt=1, case_name="", comment=""): global KSFT_RESULT_ALL KSFT_RESULT_ALL = KSFT_RESULT_ALL and ok @@ -146,8 +146,8 @@ def ktap_result(ok, cnt=1, case="", comment=""): res += "ok " res += str(cnt) + " " res += KSFT_MAIN_NAME - if case: - res += "." + str(case.__name__) + if case_name: + res += "." + case_name if comment: res += " # " + comment print(res, flush=True) @@ -163,7 +163,7 @@ def ksft_flush_defer(): entry = global_defer_queue.pop() try: entry.exec_only() - except: + except BaseException: ksft_pr(f"Exception while handling defer / cleanup (callback {i} of {qlen_start})!") tb = traceback.format_exc() for line in tb.strip().split('\n'): @@ -171,6 +171,10 @@ def ksft_flush_defer(): KSFT_RESULT = False +KsftCaseFunction = namedtuple("KsftCaseFunction", + ['name', 'original_func', 'variants']) + + def ksft_disruptive(func): """ Decorator that marks the test as disruptive (e.g. the test @@ -181,11 +185,47 @@ def ksft_disruptive(func): @functools.wraps(func) def wrapper(*args, **kwargs): if not KSFT_DISRUPTIVE: - raise KsftSkipEx(f"marked as disruptive") + raise KsftSkipEx("marked as disruptive") return func(*args, **kwargs) return wrapper +class KsftNamedVariant: + """ Named string name + argument list tuple for @ksft_variants """ + + def __init__(self, name, *params): + self.params = params + self.name = name or "_".join([str(x) for x in self.params]) + + +def ksft_variants(params): + """ + Decorator defining the sets of inputs for a test. + The parameters will be included in the name of the resulting sub-case. + Parameters can be either single object, tuple or a KsftNamedVariant. + The argument can be a list or a generator. + + Example: + + @ksft_variants([ + (1, "a"), + (2, "b"), + KsftNamedVariant("three", 3, "c"), + ]) + def my_case(cfg, a, b): + pass # ... + + ksft_run(cases=[my_case], args=(cfg, )) + + Will generate cases: + my_case.1_a + my_case.2_b + my_case.three + """ + + return lambda func: KsftCaseFunction(func.__name__, func, params) + + def ksft_setup(env): """ Setup test framework global state from the environment. @@ -199,7 +239,7 @@ def ksft_setup(env): return False try: return bool(int(value)) - except: + except Exception: raise Exception(f"failed to parse {name}") if "DISRUPTIVE" in env: @@ -220,9 +260,13 @@ def _ksft_intr(signum, frame): ksft_pr(f"Ignoring SIGTERM (cnt: {term_cnt}), already exiting...") -def ksft_run(cases=None, globs=None, case_pfx=None, args=()): +def _ksft_generate_test_cases(cases, globs, case_pfx, args): + """Generate a flat list of (func, args, name) tuples""" + cases = cases or [] + test_cases = [] + # If using the globs method find all relevant functions if globs and case_pfx: for key, value in globs.items(): if not callable(value): @@ -232,6 +276,27 @@ def ksft_run(cases=None, globs=None, case_pfx=None, args=()): cases.append(value) break + for func in cases: + if isinstance(func, KsftCaseFunction): + # Parametrized test - create case for each param + for param in func.variants: + if not isinstance(param, KsftNamedVariant): + if not isinstance(param, tuple): + param = (param, ) + param = KsftNamedVariant(None, *param) + + test_cases.append((func.original_func, + (*args, *param.params), + func.name + "." + param.name)) + else: + test_cases.append((func, args, func.__name__)) + + return test_cases + + +def ksft_run(cases=None, globs=None, case_pfx=None, args=()): + test_cases = _ksft_generate_test_cases(cases, globs, case_pfx, args) + global term_cnt term_cnt = 0 prev_sigterm = signal.signal(signal.SIGTERM, _ksft_intr) @@ -239,19 +304,19 @@ def ksft_run(cases=None, globs=None, case_pfx=None, args=()): totals = {"pass": 0, "fail": 0, "skip": 0, "xfail": 0} print("TAP version 13", flush=True) - print("1.." + str(len(cases)), flush=True) + print("1.." + str(len(test_cases)), flush=True) global KSFT_RESULT cnt = 0 stop = False - for case in cases: + for func, args, name in test_cases: KSFT_RESULT = True cnt += 1 comment = "" cnt_key = "" try: - case(*args) + func(*args) except KsftSkipEx as e: comment = "SKIP " + str(e) cnt_key = 'skip' @@ -273,7 +338,7 @@ def ksft_run(cases=None, globs=None, case_pfx=None, args=()): if not cnt_key: cnt_key = 'pass' if KSFT_RESULT else 'fail' - ktap_result(KSFT_RESULT, cnt, case, comment=comment) + ktap_result(KSFT_RESULT, cnt, name, comment=comment) totals[cnt_key] += 1 if stop: diff --git a/tools/testing/selftests/net/lib/py/nsim.py b/tools/testing/selftests/net/lib/py/nsim.py index 1a8cbe9acc48..7c640ed64c0b 100644 --- a/tools/testing/selftests/net/lib/py/nsim.py +++ b/tools/testing/selftests/net/lib/py/nsim.py @@ -27,7 +27,7 @@ class NetdevSim: self.port_index = port_index self.ns = ns self.dfs_dir = "%s/ports/%u/" % (nsimdev.dfs_dir, port_index) - ret = ip("-j link show dev %s" % ifname, ns=ns) + ret = ip("-d -j link show dev %s" % ifname, ns=ns) self.dev = json.loads(ret.stdout)[0] self.ifindex = self.dev["ifindex"] diff --git a/tools/testing/selftests/net/lib/py/utils.py b/tools/testing/selftests/net/lib/py/utils.py index cb40ecef9456..106ee1f2df86 100644 --- a/tools/testing/selftests/net/lib/py/utils.py +++ b/tools/testing/selftests/net/lib/py/utils.py @@ -32,7 +32,7 @@ class cmd: Use bkg() instead to run a command in the background. """ def __init__(self, comm, shell=None, fail=True, ns=None, background=False, - host=None, timeout=5, ksft_wait=None): + host=None, timeout=5, ksft_ready=None, ksft_wait=None): if ns: comm = f'ip netns exec {ns} ' + comm @@ -52,21 +52,25 @@ class cmd: # ksft_wait lets us wait for the background process to fully start, # we pass an FD to the child process, and wait for it to write back. # Similarly term_fd tells child it's time to exit. - pass_fds = () + pass_fds = [] env = os.environ.copy() if ksft_wait is not None: - rfd, ready_fd = os.pipe() wait_fd, self.ksft_term_fd = os.pipe() - pass_fds = (ready_fd, wait_fd, ) - env["KSFT_READY_FD"] = str(ready_fd) + pass_fds.append(wait_fd) env["KSFT_WAIT_FD"] = str(wait_fd) + ksft_ready = True # ksft_wait implies ready + if ksft_ready is not None: + rfd, ready_fd = os.pipe() + pass_fds.append(ready_fd) + env["KSFT_READY_FD"] = str(ready_fd) self.proc = subprocess.Popen(comm, shell=shell, stdout=subprocess.PIPE, stderr=subprocess.PIPE, pass_fds=pass_fds, env=env) if ksft_wait is not None: - os.close(ready_fd) os.close(wait_fd) + if ksft_ready is not None: + os.close(ready_fd) msg = fd_read_timeout(rfd, ksft_wait) os.close(rfd) if not msg: @@ -116,10 +120,10 @@ class bkg(cmd): with bkg("my_binary", ksft_wait=5): """ def __init__(self, comm, shell=None, fail=None, ns=None, host=None, - exit_wait=False, ksft_wait=None): + exit_wait=False, ksft_ready=None, ksft_wait=None): super().__init__(comm, background=True, shell=shell, fail=fail, ns=ns, host=host, - ksft_wait=ksft_wait) + ksft_ready=ksft_ready, ksft_wait=ksft_wait) self.terminate = not exit_wait and not ksft_wait self._exit_wait = exit_wait self.check_fail = fail diff --git a/tools/testing/selftests/net/setup_loopback.sh b/tools/testing/selftests/net/setup_loopback.sh deleted file mode 100644 index 2070b57849de..000000000000 --- a/tools/testing/selftests/net/setup_loopback.sh +++ /dev/null @@ -1,120 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 - -readonly FLUSH_PATH="/sys/class/net/${dev}/gro_flush_timeout" -readonly IRQ_PATH="/sys/class/net/${dev}/napi_defer_hard_irqs" -readonly FLUSH_TIMEOUT="$(< ${FLUSH_PATH})" -readonly HARD_IRQS="$(< ${IRQ_PATH})" -readonly server_ns=$(mktemp -u server-XXXXXXXX) -readonly client_ns=$(mktemp -u client-XXXXXXXX) - -netdev_check_for_carrier() { - local -r dev="$1" - - for i in {1..5}; do - carrier="$(cat /sys/class/net/${dev}/carrier)" - if [[ "${carrier}" -ne 1 ]] ; then - echo "carrier not ready yet..." >&2 - sleep 1 - else - echo "carrier ready" >&2 - break - fi - done - echo "${carrier}" -} - -# Assumes that there is no existing ipvlan device on the physical device -setup_loopback_environment() { - local dev="$1" - - # Fail hard if cannot turn on loopback mode for current NIC - ethtool -K "${dev}" loopback on || exit 1 - sleep 1 - - # Check for the carrier - carrier=$(netdev_check_for_carrier ${dev}) - if [[ "${carrier}" -ne 1 ]] ; then - echo "setup_loopback_environment failed" - exit 1 - fi -} - -setup_macvlan_ns(){ - local -r link_dev="$1" - local -r ns_name="$2" - local -r ns_dev="$3" - local -r ns_mac="$4" - local -r addr="$5" - - ip link add link "${link_dev}" dev "${ns_dev}" \ - address "${ns_mac}" type macvlan - exit_code=$? - if [[ "${exit_code}" -ne 0 ]]; then - echo "setup_macvlan_ns failed" - exit $exit_code - fi - - [[ -e /var/run/netns/"${ns_name}" ]] || ip netns add "${ns_name}" - ip link set dev "${ns_dev}" netns "${ns_name}" - ip -netns "${ns_name}" link set dev "${ns_dev}" up - if [[ -n "${addr}" ]]; then - ip -netns "${ns_name}" addr add dev "${ns_dev}" "${addr}" - fi - - sleep 1 -} - -cleanup_macvlan_ns(){ - while (( $# >= 2 )); do - ns_name="$1" - ns_dev="$2" - ip -netns "${ns_name}" link del dev "${ns_dev}" - ip netns del "${ns_name}" - shift 2 - done -} - -cleanup_loopback(){ - local -r dev="$1" - - ethtool -K "${dev}" loopback off - sleep 1 - - # Check for the carrier - carrier=$(netdev_check_for_carrier ${dev}) - if [[ "${carrier}" -ne 1 ]] ; then - echo "setup_loopback_environment failed" - exit 1 - fi -} - -setup_interrupt() { - # Use timer on host to trigger the network stack - # Also disable device interrupt to not depend on NIC interrupt - # Reduce test flakiness caused by unexpected interrupts - echo 100000 >"${FLUSH_PATH}" - echo 50 >"${IRQ_PATH}" -} - -setup_ns() { - # Set up server_ns namespace and client_ns namespace - setup_macvlan_ns "${dev}" ${server_ns} server "${SERVER_MAC}" - setup_macvlan_ns "${dev}" ${client_ns} client "${CLIENT_MAC}" -} - -cleanup_ns() { - cleanup_macvlan_ns ${server_ns} server ${client_ns} client -} - -setup() { - setup_loopback_environment "${dev}" - setup_interrupt -} - -cleanup() { - cleanup_loopback "${dev}" - - echo "${FLUSH_TIMEOUT}" >"${FLUSH_PATH}" - echo "${HARD_IRQS}" >"${IRQ_PATH}" -} diff --git a/tools/testing/selftests/net/setup_veth.sh b/tools/testing/selftests/net/setup_veth.sh deleted file mode 100644 index 152bf4c65747..000000000000 --- a/tools/testing/selftests/net/setup_veth.sh +++ /dev/null @@ -1,45 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 - -readonly server_ns=$(mktemp -u server-XXXXXXXX) -readonly client_ns=$(mktemp -u client-XXXXXXXX) - -setup_veth_ns() { - local -r link_dev="$1" - local -r ns_name="$2" - local -r ns_dev="$3" - local -r ns_mac="$4" - - [[ -e /var/run/netns/"${ns_name}" ]] || ip netns add "${ns_name}" - echo 200000 > "/sys/class/net/${ns_dev}/gro_flush_timeout" - echo 1 > "/sys/class/net/${ns_dev}/napi_defer_hard_irqs" - ip link set dev "${ns_dev}" netns "${ns_name}" mtu 65535 - ip -netns "${ns_name}" link set dev "${ns_dev}" up - - ip netns exec "${ns_name}" ethtool -K "${ns_dev}" gro on tso off -} - -setup_ns() { - # Set up server_ns namespace and client_ns namespace - ip link add name server type veth peer name client - - setup_veth_ns "${dev}" ${server_ns} server "${SERVER_MAC}" - setup_veth_ns "${dev}" ${client_ns} client "${CLIENT_MAC}" -} - -cleanup_ns() { - local ns_name - - for ns_name in ${client_ns} ${server_ns}; do - [[ -e /var/run/netns/"${ns_name}" ]] && ip netns del "${ns_name}" - done -} - -setup() { - # no global init setup step needed - : -} - -cleanup() { - cleanup_ns -} diff --git a/tools/testing/selftests/net/toeplitz.sh b/tools/testing/selftests/net/toeplitz.sh deleted file mode 100755 index 8ff172f7bb1b..000000000000 --- a/tools/testing/selftests/net/toeplitz.sh +++ /dev/null @@ -1,199 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 -# -# extended toeplitz test: test rxhash plus, optionally, either (1) rss mapping -# from rxhash to rx queue ('-rss') or (2) rps mapping from rxhash to cpu -# ('-rps <rps_map>') -# -# irq-pattern-prefix can be derived from /sys/kernel/irq/*/action, -# which is a driver-specific encoding. -# -# invoke as ./toeplitz.sh (-i <iface>) -u|-t -4|-6 \ -# [(-rss -irq_prefix <irq-pattern-prefix>)|(-rps <rps_map>)] - -source setup_loopback.sh -readonly SERVER_IP4="192.168.1.200/24" -readonly SERVER_IP6="fda8::1/64" -readonly SERVER_MAC="aa:00:00:00:00:02" - -readonly CLIENT_IP4="192.168.1.100/24" -readonly CLIENT_IP6="fda8::2/64" -readonly CLIENT_MAC="aa:00:00:00:00:01" - -PORT=8000 -KEY="$(</proc/sys/net/core/netdev_rss_key)" -TEST_RSS=false -RPS_MAP="" -PROTO_FLAG="" -IP_FLAG="" -DEV="eth0" - -# Return the number of rxqs among which RSS is configured to spread packets. -# This is determined by reading the RSS indirection table using ethtool. -get_rss_cfg_num_rxqs() { - echo $(ethtool -x "${DEV}" | - grep -E [[:space:]]+[0-9]+:[[:space:]]+ | - cut -d: -f2- | - awk '{$1=$1};1' | - tr ' ' '\n' | - sort -u | - wc -l) -} - -# Return a list of the receive irq handler cpus. -# The list is ordered by the irqs, so first rxq-0 cpu, then rxq-1 cpu, etc. -# Reads /sys/kernel/irq/ in order, so algorithm depends on -# irq_{rxq-0} < irq_{rxq-1}, etc. -get_rx_irq_cpus() { - CPUS="" - # sort so that irq 2 is read before irq 10 - SORTED_IRQS=$(for i in /sys/kernel/irq/*; do echo $i; done | sort -V) - # Consider only as many queues as RSS actually uses. We assume that - # if RSS_CFG_NUM_RXQS=N, then RSS uses rxqs 0-(N-1). - RSS_CFG_NUM_RXQS=$(get_rss_cfg_num_rxqs) - RXQ_COUNT=0 - - for i in ${SORTED_IRQS} - do - [[ "${RXQ_COUNT}" -lt "${RSS_CFG_NUM_RXQS}" ]] || break - # lookup relevant IRQs by action name - [[ -e "$i/actions" ]] || continue - cat "$i/actions" | grep -q "${IRQ_PATTERN}" || continue - irqname=$(<"$i/actions") - - # does the IRQ get called - irqcount=$(cat "$i/per_cpu_count" | tr -d '0,') - [[ -n "${irqcount}" ]] || continue - - # lookup CPU - irq=$(basename "$i") - cpu=$(cat "/proc/irq/$irq/smp_affinity_list") - - if [[ -z "${CPUS}" ]]; then - CPUS="${cpu}" - else - CPUS="${CPUS},${cpu}" - fi - RXQ_COUNT=$((RXQ_COUNT+1)) - done - - echo "${CPUS}" -} - -get_disable_rfs_cmd() { - echo "echo 0 > /proc/sys/net/core/rps_sock_flow_entries;" -} - -get_set_rps_bitmaps_cmd() { - CMD="" - for i in /sys/class/net/${DEV}/queues/rx-*/rps_cpus - do - CMD="${CMD} echo $1 > ${i};" - done - - echo "${CMD}" -} - -get_disable_rps_cmd() { - echo "$(get_set_rps_bitmaps_cmd 0)" -} - -die() { - echo "$1" - exit 1 -} - -check_nic_rxhash_enabled() { - local -r pattern="receive-hashing:\ on" - - ethtool -k "${DEV}" | grep -q "${pattern}" || die "rxhash must be enabled" -} - -parse_opts() { - local prog=$0 - shift 1 - - while [[ "$1" =~ "-" ]]; do - if [[ "$1" = "-irq_prefix" ]]; then - shift - IRQ_PATTERN="^$1-[0-9]*$" - elif [[ "$1" = "-u" || "$1" = "-t" ]]; then - PROTO_FLAG="$1" - elif [[ "$1" = "-4" ]]; then - IP_FLAG="$1" - SERVER_IP="${SERVER_IP4}" - CLIENT_IP="${CLIENT_IP4}" - elif [[ "$1" = "-6" ]]; then - IP_FLAG="$1" - SERVER_IP="${SERVER_IP6}" - CLIENT_IP="${CLIENT_IP6}" - elif [[ "$1" = "-rss" ]]; then - TEST_RSS=true - elif [[ "$1" = "-rps" ]]; then - shift - RPS_MAP="$1" - elif [[ "$1" = "-i" ]]; then - shift - DEV="$1" - else - die "Usage: ${prog} (-i <iface>) -u|-t -4|-6 \ - [(-rss -irq_prefix <irq-pattern-prefix>)|(-rps <rps_map>)]" - fi - shift - done -} - -setup() { - setup_loopback_environment "${DEV}" - - # Set up server_ns namespace and client_ns namespace - setup_macvlan_ns "${DEV}" $server_ns server \ - "${SERVER_MAC}" "${SERVER_IP}" - setup_macvlan_ns "${DEV}" $client_ns client \ - "${CLIENT_MAC}" "${CLIENT_IP}" -} - -cleanup() { - cleanup_macvlan_ns $server_ns server $client_ns client - cleanup_loopback "${DEV}" -} - -parse_opts $0 $@ - -setup -trap cleanup EXIT - -check_nic_rxhash_enabled - -# Actual test starts here -if [[ "${TEST_RSS}" = true ]]; then - # RPS/RFS must be disabled because they move packets between cpus, - # which breaks the PACKET_FANOUT_CPU identification of RSS decisions. - eval "$(get_disable_rfs_cmd) $(get_disable_rps_cmd)" \ - ip netns exec $server_ns ./toeplitz "${IP_FLAG}" "${PROTO_FLAG}" \ - -d "${PORT}" -i "${DEV}" -k "${KEY}" -T 1000 \ - -C "$(get_rx_irq_cpus)" -s -v & -elif [[ ! -z "${RPS_MAP}" ]]; then - eval "$(get_disable_rfs_cmd) $(get_set_rps_bitmaps_cmd ${RPS_MAP})" \ - ip netns exec $server_ns ./toeplitz "${IP_FLAG}" "${PROTO_FLAG}" \ - -d "${PORT}" -i "${DEV}" -k "${KEY}" -T 1000 \ - -r "0x${RPS_MAP}" -s -v & -else - ip netns exec $server_ns ./toeplitz "${IP_FLAG}" "${PROTO_FLAG}" \ - -d "${PORT}" -i "${DEV}" -k "${KEY}" -T 1000 -s -v & -fi - -server_pid=$! - -ip netns exec $client_ns ./toeplitz_client.sh "${PROTO_FLAG}" \ - "${IP_FLAG}" "${SERVER_IP%%/*}" "${PORT}" & - -client_pid=$! - -wait "${server_pid}" -exit_code=$? -kill -9 "${client_pid}" -if [[ "${exit_code}" -eq 0 ]]; then - echo "Test Succeeded!" -fi -exit "${exit_code}" diff --git a/tools/testing/selftests/net/toeplitz_client.sh b/tools/testing/selftests/net/toeplitz_client.sh deleted file mode 100755 index 2fef34f4aba1..000000000000 --- a/tools/testing/selftests/net/toeplitz_client.sh +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 -# -# A simple program for generating traffic for the toeplitz test. -# -# This program sends packets periodically for, conservatively, 20 seconds. The -# intent is for the calling program to kill this program once it is no longer -# needed, rather than waiting for the 20 second expiration. - -send_traffic() { - expiration=$((SECONDS+20)) - while [[ "${SECONDS}" -lt "${expiration}" ]] - do - if [[ "${PROTO}" == "-u" ]]; then - echo "msg $i" | nc "${IPVER}" -u -w 0 "${ADDR}" "${PORT}" - else - echo "msg $i" | nc "${IPVER}" -w 0 "${ADDR}" "${PORT}" - fi - sleep 0.001 - done -} - -PROTO=$1 -IPVER=$2 -ADDR=$3 -PORT=$4 - -send_traffic |