diff options
| -rw-r--r-- | drivers/i3c/master.c | 114 | ||||
| -rw-r--r-- | include/linux/i3c/ccc.h | 1 | ||||
| -rw-r--r-- | include/linux/i3c/master.h | 15 |
3 files changed, 127 insertions, 3 deletions
diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c index 819235440445..16260269926e 100644 --- a/drivers/i3c/master.c +++ b/drivers/i3c/master.c @@ -5,6 +5,7 @@ * Author: Boris Brezillon <boris.brezillon@bootlin.com> */ +#include <dt-bindings/i3c/i3c.h> #include <linux/acpi.h> #include <linux/atomic.h> #include <linux/bitmap.h> @@ -1164,6 +1165,51 @@ static int i3c_master_rstdaa_locked(struct i3c_master_controller *master, } /** + * i3c_master_setaasa_locked() - start a SETAASA procedure (Set All Addresses to Static Address) + * @master: I3C master object + * + * Send a SETAASA CCC command to set all attached I3C devices' dynamic addresses to + * their static address. + * + * This function must be called with the bus lock held in write mode. + * + * First, the SETHID CCC command is sent, followed by the SETAASA CCC. + * + * Return: 0 in case of success, a positive I3C error code if the error is + * one of the official Mx error codes, and a negative error code otherwise. + */ +static int i3c_master_setaasa_locked(struct i3c_master_controller *master) +{ + struct i3c_ccc_cmd_dest dest; + struct i3c_ccc_cmd cmd; + int ret; + + /* + * Send SETHID CCC command. Though it is a standard CCC command specified + * in JESD300-5, we are not defining a separate macro to be explicit that + * the value falls under the vendor specific range. + */ + i3c_ccc_cmd_dest_init(&dest, I3C_BROADCAST_ADDR, 0); + i3c_ccc_cmd_init(&cmd, false, I3C_CCC_VENDOR(0, true), &dest, 1); + ret = i3c_master_send_ccc_cmd_locked(master, &cmd); + i3c_ccc_cmd_dest_cleanup(&dest); + if (ret && cmd.err == I3C_ERROR_M2) + ret = 0; + if (ret) + return ret; + + /* Send SETAASA CCC command */ + i3c_ccc_cmd_dest_init(&dest, I3C_BROADCAST_ADDR, 0); + i3c_ccc_cmd_init(&cmd, false, I3C_CCC_SETAASA, &dest, 1); + ret = i3c_master_send_ccc_cmd_locked(master, &cmd); + i3c_ccc_cmd_dest_cleanup(&dest); + if (ret && cmd.err == I3C_ERROR_M2) + ret = 0; + + return ret; +} + +/** * i3c_master_entdaa_locked() - start a DAA (Dynamic Address Assignment) * procedure * @master: master used to send frames on the bus @@ -1939,8 +1985,10 @@ static int i3c_master_early_i3c_dev_add(struct i3c_master_controller *master, int ret; i3cdev = i3c_master_alloc_i3c_dev(master, &info); - if (IS_ERR(i3cdev)) - return -ENOMEM; + if (IS_ERR(i3cdev)) { + ret = -ENOMEM; + goto err_reserve_addr; + } i3cdev->boardinfo = boardinfo; @@ -1948,6 +1996,22 @@ static int i3c_master_early_i3c_dev_add(struct i3c_master_controller *master, if (ret) goto err_free_dev; + /* + * For devices using SETAASA instead of ENTDAA, the address is statically + * assigned. Update the dynamic address to the provided static address. + * Reattach the I3C device after updating the dynamic address with the same + * static address. It is not mandatory for such devices to implement CCC + * commands like GETPID, GETDCR etc. Hence, we can return after reattaching. + */ + if (i3cdev->boardinfo->static_addr_method & I3C_ADDR_METHOD_SETAASA) { + i3cdev->info.dyn_addr = i3cdev->boardinfo->static_addr; + ret = i3c_master_reattach_i3c_dev_locked(i3cdev, 0); + if (ret) + goto err_detach_dev; + + return 0; + } + ret = i3c_master_setdasa_locked(master, i3cdev->info.static_addr, i3cdev->boardinfo->init_dyn_addr); if (ret) @@ -1970,6 +2034,16 @@ err_detach_dev: i3c_master_detach_i3c_dev(i3cdev); err_free_dev: i3c_master_free_i3c_dev(i3cdev); +err_reserve_addr: + /* + * A target using SETAASA may still get the static address on the + * SETAASA broadcast even if attach fails here. Keep the address + * reserved so that it is not assigned to another device during DAA. + */ + if (boardinfo->static_addr_method & I3C_ADDR_METHOD_SETAASA) + i3c_bus_set_addr_slot_status(&master->bus, + boardinfo->static_addr, + I3C_ADDR_SLOT_RSVD); return ret; } @@ -2344,6 +2418,19 @@ static int i3c_master_bus_init(struct i3c_master_controller *master) i3c_master_early_i3c_dev_add(master, i3cboardinfo); } + /* + * SETAASA is a broadcast CCC. Issue it after SETDASA so that devices + * configured for SETDASA (or supporting both methods) are assigned + * first, matching MIPI DISCO guidance to prefer SETDASA when both are + * available. Targets that already have a dynamic address ignore the + * later SETAASA broadcast. + */ + if (master->addr_method & I3C_ADDR_METHOD_SETAASA) { + ret = i3c_master_setaasa_locked(master); + if (ret) + goto err_rstdaa; + } + ret = i3c_master_do_daa(master); if (ret) goto err_rstdaa; @@ -2795,7 +2882,7 @@ i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master, struct i3c_dev_boardinfo *boardinfo; struct device *dev = &master->dev; enum i3c_addr_slot_status addrstatus; - u32 init_dyn_addr = 0; + u32 init_dyn_addr = 0, static_addr_method = 0; boardinfo = devm_kzalloc(dev, sizeof(*boardinfo), GFP_KERNEL); if (!boardinfo) @@ -2813,7 +2900,19 @@ i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master, boardinfo->static_addr = reg[0]; + if (!fwnode_property_read_u32(fwnode, "mipi-i3c-static-method", &static_addr_method)) + boardinfo->static_addr_method = static_addr_method & + (I3C_ADDR_METHOD_SETDASA | I3C_ADDR_METHOD_SETAASA); + if (!fwnode_property_read_u32(fwnode, "assigned-address", &init_dyn_addr)) { + /* + * When a device advertises both SETDASA and SETAASA, an explicit + * dynamic address selects SETDASA (MIPI DISCO prefers it); drop + * SETAASA so it is not used for this device. + */ + if (boardinfo->static_addr_method & I3C_ADDR_METHOD_SETDASA) + boardinfo->static_addr_method &= ~I3C_ADDR_METHOD_SETAASA; + if (init_dyn_addr > I3C_MAX_ADDR) return -EINVAL; @@ -2823,6 +2922,14 @@ i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master, return -EINVAL; } + if (boardinfo->static_addr_method & I3C_ADDR_METHOD_SETAASA) { + /* For SETAASA, static address is taken as the dynamic address. */ + init_dyn_addr = boardinfo->static_addr; + } + + /* Update the address methods required for device discovery */ + master->addr_method |= boardinfo->static_addr_method; + boardinfo->pid = ((u64)reg[1] << 32) | reg[2]; if ((boardinfo->pid & GENMASK_ULL(63, 48)) || @@ -3458,6 +3565,7 @@ int i3c_master_register(struct i3c_master_controller *master, master->dev.release = i3c_masterdev_release; master->ops = ops; master->secondary = secondary; + master->addr_method = I3C_ADDR_METHOD_SETDASA; INIT_LIST_HEAD(&master->boardinfo.i2c); INIT_LIST_HEAD(&master->boardinfo.i3c); diff --git a/include/linux/i3c/ccc.h b/include/linux/i3c/ccc.h index 7ad677baf761..c6947dcb0f57 100644 --- a/include/linux/i3c/ccc.h +++ b/include/linux/i3c/ccc.h @@ -34,6 +34,7 @@ #define I3C_CCC_DEFSLVS I3C_CCC_ID(0x8, true) #define I3C_CCC_ENTTM I3C_CCC_ID(0xb, true) #define I3C_CCC_ENTHDR(x) I3C_CCC_ID(0x20 + (x), true) +#define I3C_CCC_SETAASA I3C_CCC_ID(0x29, true) /* Unicast-only commands */ #define I3C_CCC_SETDASA I3C_CCC_ID(0x7, false) diff --git a/include/linux/i3c/master.h b/include/linux/i3c/master.h index a16deb04b2e1..2dc139a217bf 100644 --- a/include/linux/i3c/master.h +++ b/include/linux/i3c/master.h @@ -174,6 +174,14 @@ struct i3c_device_ibi_info { * assigned a dynamic address by the master. Will be used during * bus initialization to assign it a specific dynamic address * before starting DAA (Dynamic Address Assignment) + * @static_addr_method: Bitmap describing which methods of Dynamic Address + * Assignment from a Static Address are supported by this I3C Target. + * A value of 1 in a bit position indicates that the I3C target + * supports that method, and a value of 0 indicates that the I3C + * target does not support that method. + * Bit 0: SETDASA + * Bit 1: SETAASA + * All other bits are reserved. * @pid: I3C Provisioned ID exposed by the device. This is a unique identifier * that may be used to attach boardinfo to i3c_dev_desc when the device * does not have a static address @@ -189,6 +197,7 @@ struct i3c_dev_boardinfo { struct list_head node; u8 init_dyn_addr; u8 static_addr; + u8 static_addr_method; u64 pid; struct fwnode_handle *fwnode; }; @@ -517,6 +526,11 @@ struct i3c_master_controller_ops { * @boardinfo.i2c: list of I2C boardinfo objects * @boardinfo: board-level information attached to devices connected on the bus * @bus: I3C bus exposed by this master + * @addr_method: Bitmap describing which methods of Address Assignment required + * to be run for discovering all the devices on the bus. + * Bit 0: SETDASA + * Bit 1: SETAASA + * All other bits are reserved. * @wq: freezable workqueue which can be used by master * drivers if they need to postpone operations that need to take place * in a thread context. Typical examples are Hot Join processing which @@ -552,6 +566,7 @@ struct i3c_master_controller { struct list_head i2c; } boardinfo; struct i3c_bus bus; + u8 addr_method; struct workqueue_struct *wq; struct work_struct hj_work; struct work_struct reg_work; |