diff options
| -rw-r--r-- | drivers/usb/dwc3/dwc3-apple.c | 48 |
1 files changed, 33 insertions, 15 deletions
diff --git a/drivers/usb/dwc3/dwc3-apple.c b/drivers/usb/dwc3/dwc3-apple.c index cc47cad232e3..c2ae8eb21d51 100644 --- a/drivers/usb/dwc3/dwc3-apple.c +++ b/drivers/usb/dwc3/dwc3-apple.c @@ -218,25 +218,31 @@ static int dwc3_apple_core_init(struct dwc3_apple *appledwc) return ret; } -static void dwc3_apple_phy_set_mode(struct dwc3_apple *appledwc, enum phy_mode mode) -{ - lockdep_assert_held(&appledwc->lock); - - /* - * This platform requires SUSPHY to be enabled here already in order to properly configure - * the PHY and switch dwc3's PIPE interface to USB3 PHY. - */ - dwc3_enable_susphy(&appledwc->dwc, true); - phy_set_mode(appledwc->dwc.usb2_generic_phy[0], mode); - phy_set_mode(appledwc->dwc.usb3_generic_phy[0], mode); -} - static int dwc3_apple_init(struct dwc3_apple *appledwc, enum dwc3_apple_state state) { int ret, ret_reset; lockdep_assert_held(&appledwc->lock); + /* + * The USB2 PHY on this platform must be configured for host or device mode while it is + * still powered off and before dwc3 tries to access it. Otherwise, the new configuration + * will sometimes only take affect after the *next* time dwc3 is brought up which causes + * the connected device to just not work. + * The USB3 PHY must be configured later after dwc3 has already been initialized. + */ + switch (state) { + case DWC3_APPLE_HOST: + phy_set_mode(appledwc->dwc.usb2_generic_phy[0], PHY_MODE_USB_HOST); + break; + case DWC3_APPLE_DEVICE: + phy_set_mode(appledwc->dwc.usb2_generic_phy[0], PHY_MODE_USB_DEVICE); + break; + default: + /* Unreachable unless there's a bug in this driver */ + return -EINVAL; + } + ret = reset_control_deassert(appledwc->reset); if (ret) { dev_err(appledwc->dev, "Failed to deassert reset, err=%d\n", ret); @@ -257,7 +263,13 @@ static int dwc3_apple_init(struct dwc3_apple *appledwc, enum dwc3_apple_state st case DWC3_APPLE_HOST: appledwc->dwc.dr_mode = USB_DR_MODE_HOST; dwc3_apple_set_ptrcap(appledwc, DWC3_GCTL_PRTCAP_HOST); - dwc3_apple_phy_set_mode(appledwc, PHY_MODE_USB_HOST); + /* + * This platform requires SUSPHY to be enabled here already in order to properly + * configure the PHY and switch dwc3's PIPE interface to USB3 PHY. The USB2 PHY + * has already been configured to the correct mode earlier. + */ + dwc3_enable_susphy(&appledwc->dwc, true); + phy_set_mode(appledwc->dwc.usb3_generic_phy[0], PHY_MODE_USB_HOST); ret = dwc3_host_init(&appledwc->dwc); if (ret) { dev_err(appledwc->dev, "Failed to initialize host, ret=%d\n", ret); @@ -268,7 +280,13 @@ static int dwc3_apple_init(struct dwc3_apple *appledwc, enum dwc3_apple_state st case DWC3_APPLE_DEVICE: appledwc->dwc.dr_mode = USB_DR_MODE_PERIPHERAL; dwc3_apple_set_ptrcap(appledwc, DWC3_GCTL_PRTCAP_DEVICE); - dwc3_apple_phy_set_mode(appledwc, PHY_MODE_USB_DEVICE); + /* + * This platform requires SUSPHY to be enabled here already in order to properly + * configure the PHY and switch dwc3's PIPE interface to USB3 PHY. The USB2 PHY + * has already been configured to the correct mode earlier. + */ + dwc3_enable_susphy(&appledwc->dwc, true); + phy_set_mode(appledwc->dwc.usb3_generic_phy[0], PHY_MODE_USB_DEVICE); ret = dwc3_gadget_init(&appledwc->dwc); if (ret) { dev_err(appledwc->dev, "Failed to initialize gadget, ret=%d\n", ret); |