diff options
| -rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_axienet.h | 28 | ||||
| -rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 9 |
2 files changed, 17 insertions, 20 deletions
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index fa5500decc96..0d5b300107e0 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -29,26 +29,26 @@ /* Configuration options */ /* Accept all incoming packets. Default: disabled (cleared) */ -#define XAE_OPTION_PROMISC (1 << 0) +#define XAE_OPTION_PROMISC BIT(0) /* Jumbo frame support for Tx & Rx. Default: disabled (cleared) */ -#define XAE_OPTION_JUMBO (1 << 1) +#define XAE_OPTION_JUMBO BIT(1) /* VLAN Rx & Tx frame support. Default: disabled (cleared) */ -#define XAE_OPTION_VLAN (1 << 2) +#define XAE_OPTION_VLAN BIT(2) /* Enable recognition of flow control frames on Rx. Default: enabled (set) */ -#define XAE_OPTION_FLOW_CONTROL (1 << 4) +#define XAE_OPTION_FLOW_CONTROL BIT(4) /* Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not * stripped. Default: disabled (set) */ -#define XAE_OPTION_FCS_STRIP (1 << 5) +#define XAE_OPTION_FCS_STRIP BIT(5) /* Generate FCS field and add PAD automatically for outgoing frames. * Default: enabled (set) */ -#define XAE_OPTION_FCS_INSERT (1 << 6) +#define XAE_OPTION_FCS_INSERT BIT(6) /* Enable Length/Type error checking for incoming frames. When this option is * set, the MAC will filter frames that have a mismatched type/length field @@ -56,13 +56,13 @@ * types of frames are encountered. When this option is cleared, the MAC will * allow these types of frames to be received. Default: enabled (set) */ -#define XAE_OPTION_LENTYPE_ERR (1 << 7) +#define XAE_OPTION_LENTYPE_ERR BIT(7) /* Enable the transmitter. Default: enabled (set) */ -#define XAE_OPTION_TXEN (1 << 11) +#define XAE_OPTION_TXEN BIT(11) /* Enable the receiver. Default: enabled (set) */ -#define XAE_OPTION_RXEN (1 << 12) +#define XAE_OPTION_RXEN BIT(12) /* Default options set when device is initialized or reset */ #define XAE_OPTION_DEFAULTS \ @@ -326,11 +326,11 @@ #define XAE_MULTICAST_CAM_TABLE_NUM 4 /* Axi Ethernet Synthesis features */ -#define XAE_FEATURE_PARTIAL_RX_CSUM (1 << 0) -#define XAE_FEATURE_PARTIAL_TX_CSUM (1 << 1) -#define XAE_FEATURE_FULL_RX_CSUM (1 << 2) -#define XAE_FEATURE_FULL_TX_CSUM (1 << 3) -#define XAE_FEATURE_DMA_64BIT (1 << 4) +#define XAE_FEATURE_PARTIAL_RX_CSUM BIT(0) +#define XAE_FEATURE_PARTIAL_TX_CSUM BIT(1) +#define XAE_FEATURE_FULL_RX_CSUM BIT(2) +#define XAE_FEATURE_FULL_TX_CSUM BIT(3) +#define XAE_FEATURE_DMA_64BIT BIT(4) #define XAE_NO_CSUM_OFFLOAD 0 diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index f051f0387214..ca04c298daa2 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -415,6 +415,7 @@ static void axienet_set_mac_address(struct net_device *ndev, static int netdev_set_mac_address(struct net_device *ndev, void *p) { struct sockaddr *addr = p; + axienet_set_mac_address(ndev, addr->sa_data); return 0; } @@ -613,8 +614,7 @@ static int axienet_device_reset(struct net_device *ndev) lp->options |= XAE_OPTION_VLAN; lp->options &= (~XAE_OPTION_JUMBO); - if ((ndev->mtu > XAE_MTU) && - (ndev->mtu <= XAE_JUMBO_MTU)) { + if (ndev->mtu > XAE_MTU && ndev->mtu <= XAE_JUMBO_MTU) { lp->max_frm_size = ndev->mtu + VLAN_ETH_HLEN + XAE_TRL_SIZE; @@ -1514,8 +1514,6 @@ static int axienet_open(struct net_device *ndev) int ret; struct axienet_local *lp = netdev_priv(ndev); - dev_dbg(&ndev->dev, "%s\n", __func__); - /* When we do an Axi Ethernet reset, it resets the complete core * including the MDIO. MDIO must be disabled before resetting. * Hold MDIO bus lock to avoid MDIO accesses during the reset. @@ -1576,8 +1574,6 @@ static int axienet_stop(struct net_device *ndev) struct axienet_local *lp = netdev_priv(ndev); int i; - dev_dbg(&ndev->dev, "axienet_close()\n"); - if (!lp->use_dmaengine) { napi_disable(&lp->napi_tx); napi_disable(&lp->napi_rx); @@ -1657,6 +1653,7 @@ static int axienet_change_mtu(struct net_device *ndev, int new_mtu) static void axienet_poll_controller(struct net_device *ndev) { struct axienet_local *lp = netdev_priv(ndev); + disable_irq(lp->tx_irq); disable_irq(lp->rx_irq); axienet_rx_irq(lp->tx_irq, ndev); |