diff options
| -rw-r--r-- | drivers/net/phy/micrel.c | 19 |
1 files changed, 19 insertions, 0 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 399d0cf4d342..0b42400e5e09 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -267,6 +267,8 @@ #define LAN8814_LED_CTRL_1 0x0 #define LAN8814_LED_CTRL_1_KSZ9031_LED_MODE_ BIT(6) +#define LAN8814_LED_CTRL_2 0x1 +#define LAN8814_LED_CTRL_2_LED1_COM_DIS BIT(8) /* PHY Control 1 */ #define MII_KSZPHY_CTRL_1 0x1e @@ -5894,6 +5896,23 @@ static int lan8842_config_init(struct phy_device *phydev) if (ret < 0) return ret; + /* Even if the GPIOs are set to control the LEDs the behaviour of the + * LEDs is wrong, they are not blinking when there is traffic. + * To fix this it is required to set extended LED mode + */ + ret = lanphy_modify_page_reg(phydev, LAN8814_PAGE_PORT_REGS, + LAN8814_LED_CTRL_1, + LAN8814_LED_CTRL_1_KSZ9031_LED_MODE_, 0); + if (ret < 0) + return ret; + + ret = lanphy_modify_page_reg(phydev, LAN8814_PAGE_PORT_REGS, + LAN8814_LED_CTRL_2, + LAN8814_LED_CTRL_2_LED1_COM_DIS, + LAN8814_LED_CTRL_2_LED1_COM_DIS); + if (ret < 0) + return ret; + /* To allow the PHY to control the LEDs the GPIOs of the PHY should have * a function mode and not the GPIO. Apparently by default the value is * GPIO and not function even though the datasheet it says that it is |