diff options
| -rw-r--r-- | arch/arm/boot/dts/microchip/sama7d65.dtsi | 271 |
1 files changed, 271 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi index ad1464c7b8c6..385d47657220 100644 --- a/arch/arm/boot/dts/microchip/sama7d65.dtsi +++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi @@ -419,6 +419,21 @@ status = "disabled"; }; + spi0: spi@400 { + compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; + clock-names = "spi_clk"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>, + <&dma1 AT91_XDMAC_DT_PERID(5)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + i2c0: i2c@600 { compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; reg = <0x600 0x200>; @@ -443,6 +458,22 @@ #size-cells = <1>; status = "disabled"; + uart1: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>; + clock-names = "usart"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>, + <&dma0 AT91_XDMAC_DT_PERID(7)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <32>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + spi1: spi@400 { compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; reg = <0x400 0x200>; @@ -497,6 +528,35 @@ atmel,usart-mode = <AT91_USART_MODE_SERIAL>; status = "disabled"; }; + + spi2: spi@400 { + compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 36>; + clock-names = "spi_clk"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma1 AT91_XDMAC_DT_PERID(10)>, + <&dma1 AT91_XDMAC_DT_PERID(9)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + i2c2: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 36>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma1 AT91_XDMAC_DT_PERID(10)>, + <&dma1 AT91_XDMAC_DT_PERID(9)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; }; flx3: flexcom@e182c000 { @@ -524,6 +584,21 @@ status = "disabled"; }; + spi3: spi@400 { + compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; + clock-names = "spi_clk"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>, + <&dma0 AT91_XDMAC_DT_PERID(11)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + i2c3: i2c@600 { compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; reg = <0x600 0x200>; @@ -579,6 +654,20 @@ atmel,fifo-size = <32>; status = "disabled"; }; + + i2c4: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>, + <&dma1 AT91_XDMAC_DT_PERID(13)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; }; flx5: flexcom@e201c000 { @@ -590,6 +679,37 @@ #size-cells = <1>; status = "disabled"; + uart5: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; + clock-names = "usart"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(16)>, + <&dma0 AT91_XDMAC_DT_PERID(15)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <32>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi5: spi@400 { + compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; + clock-names = "spi_clk"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(16)>, + <&dma0 AT91_XDMAC_DT_PERID(15)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + i2c5: i2c@600 { compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; reg = <0x600 0x200>; @@ -629,6 +749,35 @@ atmel,fifo-size = <32>; status = "disabled"; }; + + spi6: spi@400 { + compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; + clock-names = "spi_clk"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma1 AT91_XDMAC_DT_PERID(18)>, + <&dma1 AT91_XDMAC_DT_PERID(17)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + i2c6: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma1 AT91_XDMAC_DT_PERID(18)>, + <&dma1 AT91_XDMAC_DT_PERID(17)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; }; flx7: flexcom@e2024000 { @@ -655,6 +804,35 @@ atmel,usart-mode = <AT91_USART_MODE_SERIAL>; status = "disabled"; }; + + spi7: spi@400 { + compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; + clock-names = "spi_clk"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>, + <&dma1 AT91_XDMAC_DT_PERID(19)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + i2c7: i2c@600 { + compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>, + <&dma1 AT91_XDMAC_DT_PERID(19)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; }; flx8: flexcom@e281c000 { @@ -666,6 +844,37 @@ #size-cells = <1>; status = "disabled"; + uart8: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; + clock-names = "usart"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>, + <&dma0 AT91_XDMAC_DT_PERID(21)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <32>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi8: spi@400 { + compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; + clock-names = "spi_clk"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>, + <&dma0 AT91_XDMAC_DT_PERID(21)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + i2c8: i2c@600 { compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; reg = <0x600 0x200>; @@ -690,6 +899,37 @@ #size-cells = <1>; status = "disabled"; + uart9: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; + clock-names = "usart"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>, + <&dma0 AT91_XDMAC_DT_PERID(23)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <32>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi9: spi@400 { + compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; + clock-names = "spi_clk"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>, + <&dma0 AT91_XDMAC_DT_PERID(23)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + i2c9: i2c@600 { compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; reg = <0x600 0x200>; @@ -714,6 +954,37 @@ #size-cells = <1>; status = "disabled"; + uart10: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; + clock-names = "usart"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(26)>, + <&dma0 AT91_XDMAC_DT_PERID(25)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <32>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + + spi10: spi@400 { + compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; + clock-names = "spi_clk"; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(26)>, + <&dma0 AT91_XDMAC_DT_PERID(25)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + i2c10: i2c@600 { compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; reg = <0x600 0x200>; |