diff options
Diffstat (limited to 'Documentation/devicetree/bindings/memory-controllers')
6 files changed, 98 insertions, 78 deletions
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml deleted file mode 100644 index 30267ce70124..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml +++ /dev/null @@ -1,74 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr-props.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Common properties for LPDDR types - -description: - Different LPDDR types generally use the same properties and only differ in the - range of legal values for each. This file defines the common parts that can be - reused for each type. Nodes using this schema should generally be nested under - an LPDDR channel node. - -maintainers: - - Krzysztof Kozlowski <krzk@kernel.org> - -properties: - compatible: - description: - Compatible strings can be either explicit vendor names and part numbers - (e.g. elpida,ECB240ABACN), or generated strings of the form - lpddrX-YY,ZZZZ where X is the LPDDR version, YY is the manufacturer ID - (from MR5) and ZZZZ is the revision ID (from MR6 and MR7). Both IDs are - formatted in lower case hexadecimal representation with leading zeroes. - The latter form can be useful when LPDDR nodes are created at runtime by - boot firmware that doesn't have access to static part number information. - - reg: - description: - The rank number of this LPDDR rank when used as a subnode to an LPDDR - channel. - minimum: 0 - maximum: 3 - - revision-id: - $ref: /schemas/types.yaml#/definitions/uint32-array - description: - Revision IDs read from Mode Register 6 and 7. One byte per uint32 cell (i.e. <MR6 MR7>). - maxItems: 2 - items: - minimum: 0 - maximum: 255 - - density: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - Density in megabits of SDRAM chip. Decoded from Mode Register 8. - enum: - - 64 - - 128 - - 256 - - 512 - - 1024 - - 2048 - - 3072 - - 4096 - - 6144 - - 8192 - - 12288 - - 16384 - - 24576 - - 32768 - - io-width: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - IO bus width in bits of SDRAM chip. Decoded from Mode Register 8. - enum: - - 8 - - 16 - - 32 - -additionalProperties: true diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml index a237bc259273..704bbc562528 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml @@ -10,7 +10,7 @@ maintainers: - Krzysztof Kozlowski <krzk@kernel.org> allOf: - - $ref: jedec,lpddr-props.yaml# + - $ref: jedec,sdram-props.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml index e328a1195ba6..0d28df3d2bfa 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml @@ -10,7 +10,7 @@ maintainers: - Krzysztof Kozlowski <krzk@kernel.org> allOf: - - $ref: jedec,lpddr-props.yaml# + - $ref: jedec,sdram-props.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml index a078892fecee..65aa07861453 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml @@ -10,7 +10,7 @@ maintainers: - Krzysztof Kozlowski <krzk@kernel.org> allOf: - - $ref: jedec,lpddr-props.yaml# + - $ref: jedec,sdram-props.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml index e441dac5f154..cf5d5a8e94b3 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml @@ -10,7 +10,7 @@ maintainers: - Krzysztof Kozlowski <krzk@kernel.org> allOf: - - $ref: jedec,lpddr-props.yaml# + - $ref: jedec,sdram-props.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,sdram-props.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,sdram-props.yaml new file mode 100644 index 000000000000..fedd66eeb9d5 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,sdram-props.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,sdram-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common properties for SDRAM types + +description: + Different SDRAM types generally use the same properties and only differ in the + range of legal values for each. This file defines the common parts that can be + reused for each type. Nodes using this schema should generally be nested under + a SDRAM channel node. + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + description: | + Compatible strings can be either explicit vendor names and part numbers + (e.g. elpida,ECB240ABACN), or generated strings of the form + lpddrX-YY,ZZZZ or ddrX-YYYY,AAAA...-ZZ where X, Y, and Z are lowercase + hexadecimal with leading zeroes, and A is lowercase ASCII. + For LPDDR and DDR SDRAM, X is the SDRAM version (2, 3, 4, etc.). + For LPDDR SDRAM: + - YY is the manufacturer ID (from MR5), 1 byte + - ZZZZ is the revision ID (from MR6 and MR7), 2 bytes + For DDR4 SDRAM with SPD, according to JEDEC SPD4.1.2.L-6: + - YYYY is the manufacturer ID, 2 bytes, from bytes 320 and 321 + - AAAA... is the part number, 20 bytes (20 chars) from bytes 329 to 348 + without trailing spaces + - ZZ is the revision ID, 1 byte, from byte 349 + The former form is useful when the SDRAM vendor and part number are + known, for example, when memory is soldered on the board. The latter + form is useful when SDRAM nodes are created at runtime by boot firmware + that doesn't have access to static part number information. + + reg: + description: + The rank number of this memory rank when used as a subnode to an memory + channel. + minimum: 0 + maximum: 3 + + revision-id: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + SDRAM revision ID: + - LPDDR SDRAM, decoded from Mode Registers 6 and 7, always 2 bytes. + - DDR4 SDRAM, decoded from the SPD from byte 349 according to + JEDEC SPD4.1.2.L-6, always 1 byte. + One byte per uint32 cell (e.g., <MR6 MR7>). + maxItems: 2 + items: + minimum: 0 + maximum: 255 + + density: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Density of the SDRAM chip in megabits: + - LPDDR SDRAM, decoded from Mode Register 8. + - DDR4 SDRAM, decoded from the SPD from bits 3-0 of byte 4 according to + JEDEC SPD4.1.2.L-6. + enum: + - 64 + - 128 + - 256 + - 512 + - 1024 + - 2048 + - 3072 + - 4096 + - 6144 + - 8192 + - 12288 + - 16384 + - 24576 + - 32768 + + io-width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + I/O bus width in bits of the SDRAM chip: + - LPDDR SDRAM, decoded from Mode Register 8. + - DDR4 SDRAM, decoded from the SPD from bits 2-0 of byte 12 according to + JEDEC SPD4.1.2.L-6. + enum: + - 8 + - 16 + - 32 + +additionalProperties: true |