diff options
Diffstat (limited to 'Documentation/devicetree/bindings/soc')
3 files changed, 26 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt index e284e4e1ccd5..5a33619d881d 100644 --- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt +++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt @@ -5,7 +5,7 @@ and power management. Required properites: - reg : Offset and length of the register set of the RCPM block. - - fsl,#rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the + - #fsl,rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the fsl,rcpm-wakeup property. - compatible : Must contain a chip-specific RCPM block compatible string and (if applicable) may contain a chassis-version RCPM compatible @@ -20,6 +20,7 @@ Required properites: * "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm * "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm * "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm + * "fsl,qoriq-rcpm-2.1+": for chassis 2.1+ rcpm All references to "1.0" and "2.0" refer to the QorIQ chassis version to which the chip complies. @@ -27,14 +28,19 @@ Chassis Version Example Chips --------------- ------------------------------- 1.0 p4080, p5020, p5040, p2041, p3041 2.0 t4240, b4860, b4420 -2.1 t1040, ls1021 +2.1 t1040, +2.1+ ls1021a, ls1012a, ls1043a, ls1046a + +Optional properties: + - little-endian : RCPM register block is Little Endian. Without it RCPM + will be Big Endian (default case). Example: The RCPM node for T4240: rcpm: global-utilities@e2000 { compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0"; reg = <0xe2000 0x1000>; - fsl,#rcpm-wakeup-cells = <2>; + #fsl,rcpm-wakeup-cells = <2>; }; * Freescale RCPM Wakeup Source Device Tree Bindings @@ -44,7 +50,7 @@ can be used as a wakeup source. - fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR register cells. The number of IPPDEXPCR register cells is defined in - "fsl,#rcpm-wakeup-cells" in the rcpm node. The first register cell is + "#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is the bit mask that should be set in IPPDEXPCR0, and the second register cell is for IPPDEXPCR1, and so on. diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt index f3fa313963d5..616fddcd09fd 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt @@ -22,6 +22,7 @@ resources. "qcom,rpm-apq8084" "qcom,rpm-msm8916" "qcom,rpm-msm8974" + "qcom,rpm-msm8976" "qcom,rpm-msm8998" "qcom,rpm-sdm660" "qcom,rpm-qcs404" diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt index 46e27cd69f18..f96511aa3897 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.txt @@ -10,6 +10,12 @@ From RK3368 SoCs, the GRF is divided into two sections, On RK3328 SoCs, the GRF adds a section for USB2PHYGRF, +ON RK3308 SoC, the GRF is divided into four sections: +- GRF, used for general non-secure system, +- SGRF, used for general secure system, +- DETECTGRF, used for audio codec system, +- COREGRF, used for pvtm, + Required Properties: - compatible: GRF should be one of the following: @@ -19,19 +25,25 @@ Required Properties: - "rockchip,rk3188-grf", "syscon": for rk3188 - "rockchip,rk3228-grf", "syscon": for rk3228 - "rockchip,rk3288-grf", "syscon": for rk3288 + - "rockchip,rk3308-grf", "syscon": for rk3308 - "rockchip,rk3328-grf", "syscon": for rk3328 - "rockchip,rk3368-grf", "syscon": for rk3368 - "rockchip,rk3399-grf", "syscon": for rk3399 - "rockchip,rv1108-grf", "syscon": for rv1108 +- compatible: DETECTGRF should be one of the following: + - "rockchip,rk3308-detect-grf", "syscon": for rk3308 +- compatilbe: COREGRF should be one of the following: + - "rockchip,rk3308-core-grf", "syscon": for rk3308 - compatible: PMUGRF should be one of the following: - "rockchip,px30-pmugrf", "syscon": for px30 - "rockchip,rk3368-pmugrf", "syscon": for rk3368 - "rockchip,rk3399-pmugrf", "syscon": for rk3399 -- compatible: SGRF should be one of the following +- compatible: SGRF should be one of the following: - "rockchip,rk3288-sgrf", "syscon": for rk3288 -- compatible: USB2PHYGRF should be one of the followings +- compatible: USB2PHYGRF should be one of the following: + - "rockchip,px30-usb2phy-grf", "syscon": for px30 - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328 -- compatible: USBGRF should be one of the following +- compatible: USBGRF should be one of the following: - "rockchip,rv1108-usbgrf", "syscon": for rv1108 - reg: physical base address of the controller and length of memory mapped region. |