diff options
Diffstat (limited to 'arch')
87 files changed, 1370 insertions, 1350 deletions
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts index 64075cc41d92..f5d38a9f4763 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts @@ -284,12 +284,12 @@ &i2c11 { status = "okay"; power-sensor@10 { - compatible = "adi, adm1272"; + compatible = "adi,adm1272"; reg = <0x10>; }; power-sensor@12 { - compatible = "adi, adm1272"; + compatible = "adi,adm1272"; reg = <0x12>; }; @@ -454,22 +454,20 @@ }; pwm@20{ - compatible = "max31790"; + compatible = "maxim,max31790"; reg = <0x20>; - #address-cells = <1>; - #size-cells = <0>; }; gpio@22{ compatible = "ti,tca6424"; reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; }; pwm@23{ - compatible = "max31790"; + compatible = "maxim,max31790"; reg = <0x23>; - #address-cells = <1>; - #size-cells = <0>; }; adc@33 { @@ -504,22 +502,20 @@ }; pwm@20{ - compatible = "max31790"; + compatible = "maxim,max31790"; reg = <0x20>; - #address-cells = <1>; - #size-cells = <0>; }; gpio@22{ compatible = "ti,tca6424"; reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; }; pwm@23{ - compatible = "max31790"; + compatible = "maxim,max31790"; reg = <0x23>; - #address-cells = <1>; - #size-cells = <0>; }; adc@33 { diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi index f36063c57c7f..72c55e5187ca 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi @@ -440,7 +440,7 @@ clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>; clock-names = "stmmaceth", "ptp_ref"; resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; - reset-names = "stmmaceth", "ahb"; + reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; @@ -460,7 +460,7 @@ clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>; clock-names = "stmmaceth", "ptp_ref"; resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; - reset-names = "stmmaceth", "ahb"; + reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; @@ -480,7 +480,7 @@ clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>; clock-names = "stmmaceth", "ptp_ref"; resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; - reset-names = "stmmaceth", "ahb"; + reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/mediatek/mt7623.dtsi b/arch/arm/boot/dts/mediatek/mt7623.dtsi index f0b4a09004b3..9c5a52ce9351 100644 --- a/arch/arm/boot/dts/mediatek/mt7623.dtsi +++ b/arch/arm/boot/dts/mediatek/mt7623.dtsi @@ -308,7 +308,7 @@ clock-names = "spi", "wrap"; }; - cir: cir@10013000 { + cir: ir-receiver@10013000 { compatible = "mediatek,mt7623-cir"; reg = <0 0x10013000 0 0x1000>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts index e055b9e2fe34..35a933eec573 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts @@ -197,7 +197,7 @@ &sdmmc0 { bus-width = <4>; - mmc-ddr-3_3v; + no-1-8-v; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; status = "okay"; diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi index aec7fa5ab5d8..fe79d5d40c11 100644 --- a/arch/arm/boot/dts/st/stm32mp151.dtsi +++ b/arch/arm/boot/dts/st/stm32mp151.dtsi @@ -1165,7 +1165,7 @@ reg = <0x4c001000 0x400>; st,proc-id = <0>; interrupts-extended = - <&exti 61 1>, + <&exti 61 IRQ_TYPE_LEVEL_HIGH>, <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "rx", "tx"; clocks = <&rcc IPCC>; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi index 35b1034aa3cf..e4e114d8c337 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi @@ -6,18 +6,6 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h> -/ { - aliases { - serial0 = &uart4; - serial1 = &usart3; - serial2 = &uart8; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - &adc { status = "disabled"; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi index 46b87a27d8b3..7050582837d5 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi @@ -7,16 +7,6 @@ #include <dt-bindings/pwm/pwm.h> / { - aliases { - serial0 = &uart4; - serial1 = &usart3; - serial2 = &uart8; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - clk_ext_audio_codec: clock-codec { compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi index abc595350e71..81743a448607 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi @@ -7,16 +7,6 @@ #include <dt-bindings/pwm/pwm.h> / { - aliases { - serial0 = &uart4; - serial1 = &usart3; - serial2 = &uart8; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - led { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi index 74a11ccc5333..142d4a8731f8 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi @@ -14,6 +14,13 @@ ethernet1 = &ksz8851; rtc0 = &hwrtc; rtc1 = &rtc; + serial0 = &uart4; + serial1 = &uart8; + serial2 = &usart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; }; memory@c0000000 { diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 1a26af0fabc7..22ecaf09d00f 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -591,7 +591,21 @@ static int at91_suspend_finish(unsigned long val) return 0; } -static void at91_pm_switch_ba_to_vbat(void) +/** + * at91_pm_switch_ba_to_auto() - Configure Backup Unit Power Switch + * to automatic/hardware mode. + * + * The Backup Unit Power Switch can be managed either by software or hardware. + * Enabling hardware mode allows the automatic transition of power between + * VDDANA (or VDDIN33) and VDDBU (or VBAT, respectively), based on the + * availability of these power sources. + * + * If the Backup Unit Power Switch is already in automatic mode, no action is + * required. If it is in software-controlled mode, it is switched to automatic + * mode to enhance safety and eliminate the need for toggling between power + * sources. + */ +static void at91_pm_switch_ba_to_auto(void) { unsigned int offset = offsetof(struct at91_pm_sfrbu_regs, pswbu); unsigned int val; @@ -602,24 +616,19 @@ static void at91_pm_switch_ba_to_vbat(void) val = readl(soc_pm.data.sfrbu + offset); - /* Already on VBAT. */ - if (!(val & soc_pm.sfrbu_regs.pswbu.state)) + /* Already on auto/hardware. */ + if (!(val & soc_pm.sfrbu_regs.pswbu.ctrl)) return; - val &= ~soc_pm.sfrbu_regs.pswbu.softsw; - val |= soc_pm.sfrbu_regs.pswbu.key | soc_pm.sfrbu_regs.pswbu.ctrl; + val &= ~soc_pm.sfrbu_regs.pswbu.ctrl; + val |= soc_pm.sfrbu_regs.pswbu.key; writel(val, soc_pm.data.sfrbu + offset); - - /* Wait for update. */ - val = readl(soc_pm.data.sfrbu + offset); - while (val & soc_pm.sfrbu_regs.pswbu.state) - val = readl(soc_pm.data.sfrbu + offset); } static void at91_pm_suspend(suspend_state_t state) { if (soc_pm.data.mode == AT91_PM_BACKUP) { - at91_pm_switch_ba_to_vbat(); + at91_pm_switch_ba_to_auto(); cpu_suspend(0, at91_suspend_finish); diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 3312ef93355d..a5bf5554800f 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -289,7 +289,7 @@ static struct gpiod_lookup_table nokia770_irq_gpio_table = { GPIO_LOOKUP("gpio-0-15", 15, "ads7846_irq", GPIO_ACTIVE_HIGH), /* GPIO used for retu IRQ */ - GPIO_LOOKUP("gpio-48-63", 15, "retu_irq", + GPIO_LOOKUP("gpio-48-63", 14, "retu_irq", GPIO_ACTIVE_HIGH), /* GPIO used for tahvo IRQ */ GPIO_LOOKUP("gpio-32-47", 8, "tahvo_irq", diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index 50ed2e9f10ed..6a69d0052494 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -390,6 +390,8 @@ &tcon0 { pinctrl-names = "default"; pinctrl-0 = <&lcd_rgb666_pins>; + assigned-clocks = <&ccu CLK_TCON0>; + assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index 1128030e4c25..d3e5eed84f36 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -369,6 +369,8 @@ &tcon0 { pinctrl-names = "default"; pinctrl-0 = <&lcd_rgb666_pins>; + assigned-clocks = <&ccu CLK_TCON0>; + assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 57ac18738c99..7103298f6a1c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -410,6 +410,8 @@ clock-names = "ahb", "tcon-ch0"; clock-output-names = "tcon-data-clock"; #clock-cells = <0>; + assigned-clocks = <&ccu CLK_TCON0>; + assigned-clock-parents = <&ccu CLK_PLL_MIPI>; resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; reset-names = "lcd", "lvds"; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi index 111495622cac..8df919d39e5b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi @@ -938,7 +938,7 @@ interrupt-controller; #interrupt-cells = <2>; - clock: mt6397clock { + clock: clocks { compatible = "mediatek,mt6397-clk"; #clock-cells = <1>; }; @@ -949,11 +949,10 @@ #gpio-cells = <2>; }; - regulator: mt6397regulator { + regulators { compatible = "mediatek,mt6397-regulator"; mt6397_vpca15_reg: buck_vpca15 { - regulator-compatible = "buck_vpca15"; regulator-name = "vpca15"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1350000>; @@ -963,7 +962,6 @@ }; mt6397_vpca7_reg: buck_vpca7 { - regulator-compatible = "buck_vpca7"; regulator-name = "vpca7"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1350000>; @@ -973,7 +971,6 @@ }; mt6397_vsramca15_reg: buck_vsramca15 { - regulator-compatible = "buck_vsramca15"; regulator-name = "vsramca15"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1350000>; @@ -982,7 +979,6 @@ }; mt6397_vsramca7_reg: buck_vsramca7 { - regulator-compatible = "buck_vsramca7"; regulator-name = "vsramca7"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1350000>; @@ -991,7 +987,6 @@ }; mt6397_vcore_reg: buck_vcore { - regulator-compatible = "buck_vcore"; regulator-name = "vcore"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1350000>; @@ -1000,7 +995,6 @@ }; mt6397_vgpu_reg: buck_vgpu { - regulator-compatible = "buck_vgpu"; regulator-name = "vgpu"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1350000>; @@ -1009,7 +1003,6 @@ }; mt6397_vdrm_reg: buck_vdrm { - regulator-compatible = "buck_vdrm"; regulator-name = "vdrm"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1400000>; @@ -1018,7 +1011,6 @@ }; mt6397_vio18_reg: buck_vio18 { - regulator-compatible = "buck_vio18"; regulator-name = "vio18"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; @@ -1027,18 +1019,15 @@ }; mt6397_vtcxo_reg: ldo_vtcxo { - regulator-compatible = "ldo_vtcxo"; regulator-name = "vtcxo"; regulator-always-on; }; mt6397_va28_reg: ldo_va28 { - regulator-compatible = "ldo_va28"; regulator-name = "va28"; }; mt6397_vcama_reg: ldo_vcama { - regulator-compatible = "ldo_vcama"; regulator-name = "vcama"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -1046,18 +1035,15 @@ }; mt6397_vio28_reg: ldo_vio28 { - regulator-compatible = "ldo_vio28"; regulator-name = "vio28"; regulator-always-on; }; mt6397_vusb_reg: ldo_vusb { - regulator-compatible = "ldo_vusb"; regulator-name = "vusb"; }; mt6397_vmc_reg: ldo_vmc { - regulator-compatible = "ldo_vmc"; regulator-name = "vmc"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; @@ -1065,7 +1051,6 @@ }; mt6397_vmch_reg: ldo_vmch { - regulator-compatible = "ldo_vmch"; regulator-name = "vmch"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; @@ -1073,7 +1058,6 @@ }; mt6397_vemc_3v3_reg: ldo_vemc3v3 { - regulator-compatible = "ldo_vemc3v3"; regulator-name = "vemc_3v3"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; @@ -1081,7 +1065,6 @@ }; mt6397_vgp1_reg: ldo_vgp1 { - regulator-compatible = "ldo_vgp1"; regulator-name = "vcamd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -1089,7 +1072,6 @@ }; mt6397_vgp2_reg: ldo_vgp2 { - regulator-compatible = "ldo_vgp2"; regulator-name = "vcamio"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -1097,7 +1079,6 @@ }; mt6397_vgp3_reg: ldo_vgp3 { - regulator-compatible = "ldo_vgp3"; regulator-name = "vcamaf"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -1105,7 +1086,6 @@ }; mt6397_vgp4_reg: ldo_vgp4 { - regulator-compatible = "ldo_vgp4"; regulator-name = "vgp4"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3300000>; @@ -1113,7 +1093,6 @@ }; mt6397_vgp5_reg: ldo_vgp5 { - regulator-compatible = "ldo_vgp5"; regulator-name = "vgp5"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3000000>; @@ -1121,7 +1100,6 @@ }; mt6397_vgp6_reg: ldo_vgp6 { - regulator-compatible = "ldo_vgp6"; regulator-name = "vgp6"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -1130,7 +1108,6 @@ }; mt6397_vibr_reg: ldo_vibr { - regulator-compatible = "ldo_vibr"; regulator-name = "vibr"; regulator-min-microvolt = <1300000>; regulator-max-microvolt = <3300000>; @@ -1138,7 +1115,7 @@ }; }; - rtc: mt6397rtc { + rtc: rtc { compatible = "mediatek,mt6397-rtc"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index d258c80213b2..f6a70f22bd0c 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -308,11 +308,10 @@ interrupt-controller; #interrupt-cells = <2>; - mt6397regulator: mt6397regulator { + regulators { compatible = "mediatek,mt6397-regulator"; mt6397_vpca15_reg: buck_vpca15 { - regulator-compatible = "buck_vpca15"; regulator-name = "vpca15"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1350000>; @@ -321,7 +320,6 @@ }; mt6397_vpca7_reg: buck_vpca7 { - regulator-compatible = "buck_vpca7"; regulator-name = "vpca7"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1350000>; @@ -330,7 +328,6 @@ }; mt6397_vsramca15_reg: buck_vsramca15 { - regulator-compatible = "buck_vsramca15"; regulator-name = "vsramca15"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1350000>; @@ -339,7 +336,6 @@ }; mt6397_vsramca7_reg: buck_vsramca7 { - regulator-compatible = "buck_vsramca7"; regulator-name = "vsramca7"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1350000>; @@ -348,7 +344,6 @@ }; mt6397_vcore_reg: buck_vcore { - regulator-compatible = "buck_vcore"; regulator-name = "vcore"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1350000>; @@ -357,7 +352,6 @@ }; mt6397_vgpu_reg: buck_vgpu { - regulator-compatible = "buck_vgpu"; regulator-name = "vgpu"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1350000>; @@ -366,7 +360,6 @@ }; mt6397_vdrm_reg: buck_vdrm { - regulator-compatible = "buck_vdrm"; regulator-name = "vdrm"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1400000>; @@ -375,7 +368,6 @@ }; mt6397_vio18_reg: buck_vio18 { - regulator-compatible = "buck_vio18"; regulator-name = "vio18"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; @@ -384,19 +376,16 @@ }; mt6397_vtcxo_reg: ldo_vtcxo { - regulator-compatible = "ldo_vtcxo"; regulator-name = "vtcxo"; regulator-always-on; }; mt6397_va28_reg: ldo_va28 { - regulator-compatible = "ldo_va28"; regulator-name = "va28"; regulator-always-on; }; mt6397_vcama_reg: ldo_vcama { - regulator-compatible = "ldo_vcama"; regulator-name = "vcama"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <2800000>; @@ -404,18 +393,15 @@ }; mt6397_vio28_reg: ldo_vio28 { - regulator-compatible = "ldo_vio28"; regulator-name = "vio28"; regulator-always-on; }; mt6397_vusb_reg: ldo_vusb { - regulator-compatible = "ldo_vusb"; regulator-name = "vusb"; }; mt6397_vmc_reg: ldo_vmc { - regulator-compatible = "ldo_vmc"; regulator-name = "vmc"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; @@ -423,7 +409,6 @@ }; mt6397_vmch_reg: ldo_vmch { - regulator-compatible = "ldo_vmch"; regulator-name = "vmch"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; @@ -431,7 +416,6 @@ }; mt6397_vemc_3v3_reg: ldo_vemc3v3 { - regulator-compatible = "ldo_vemc3v3"; regulator-name = "vemc_3v3"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; @@ -439,7 +423,6 @@ }; mt6397_vgp1_reg: ldo_vgp1 { - regulator-compatible = "ldo_vgp1"; regulator-name = "vcamd"; regulator-min-microvolt = <1220000>; regulator-max-microvolt = <3300000>; @@ -447,7 +430,6 @@ }; mt6397_vgp2_reg: ldo_vgp2 { - regulator-compatible = "ldo_vgp2"; regulator-name = "vcamio"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; @@ -455,7 +437,6 @@ }; mt6397_vgp3_reg: ldo_vgp3 { - regulator-compatible = "ldo_vgp3"; regulator-name = "vcamaf"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3300000>; @@ -463,7 +444,6 @@ }; mt6397_vgp4_reg: ldo_vgp4 { - regulator-compatible = "ldo_vgp4"; regulator-name = "vgp4"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3300000>; @@ -471,7 +451,6 @@ }; mt6397_vgp5_reg: ldo_vgp5 { - regulator-compatible = "ldo_vgp5"; regulator-name = "vgp5"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3000000>; @@ -479,7 +458,6 @@ }; mt6397_vgp6_reg: ldo_vgp6 { - regulator-compatible = "ldo_vgp6"; regulator-name = "vgp6"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3300000>; @@ -487,7 +465,6 @@ }; mt6397_vibr_reg: ldo_vibr { - regulator-compatible = "ldo_vibr"; regulator-name = "vibr"; regulator-min-microvolt = <1300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts index 9a166dccd727..8f95b7270c3f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts @@ -27,6 +27,10 @@ hid-descr-addr = <0x0001>; }; +&mt6358codec { + mediatek,dmic-mode = <1>; /* one-wire */ +}; + &qca_wifi { qcom,ath10k-calibration-variant = "GO_DAMU"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts index 8fa89db03e63..328294245a79 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts @@ -11,3 +11,18 @@ model = "Google kenzo sku17 board"; compatible = "google,juniper-sku17", "google,juniper", "mediatek,mt8183"; }; + +&i2c0 { + touchscreen@40 { + compatible = "hid-over-i2c"; + reg = <0x40>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <70>; + hid-descr-addr = <0x0001>; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi index 76d33540166f..c942e461a177 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi @@ -6,6 +6,21 @@ /dts-v1/; #include "mt8183-kukui-jacuzzi.dtsi" +&i2c0 { + touchscreen@40 { + compatible = "hid-over-i2c"; + reg = <0x40>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <70>; + hid-descr-addr = <0x0001>; + }; +}; + &i2c2 { trackpad@2c { compatible = "hid-over-i2c"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi index 629c4b7ecbc6..8e0575f8c1b2 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi @@ -39,8 +39,6 @@ pp3300_panel: pp3300-panel { compatible = "regulator-fixed"; regulator-name = "pp3300_panel"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; pinctrl-names = "default"; pinctrl-0 = <&pp3300_panel_pins>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 8721a5ffca30..d1b635514862 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -1026,7 +1026,8 @@ }; keyboard: keyboard@10010000 { - compatible = "mediatek,mt6779-keypad"; + compatible = "mediatek,mt8183-keypad", + "mediatek,mt6779-keypad"; reg = <0 0x10010000 0 0x1000>; interrupts = <GIC_SPI 186 IRQ_TYPE_EDGE_FALLING>; clocks = <&clk26m>; diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi index 2c184f9e0fc3..a63c59bc8e97 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi @@ -1545,6 +1545,8 @@ #address-cells = <2>; #size-cells = <2>; ranges; + wakeup-source; + mediatek,syscon-wakeup = <&pericfg 0x420 2>; status = "disabled"; usb_host0: usb@11200000 { @@ -1558,8 +1560,6 @@ <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>; clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck"; interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>; - mediatek,syscon-wakeup = <&pericfg 0x420 2>; - wakeup-source; status = "disabled"; }; }; @@ -1611,6 +1611,8 @@ #address-cells = <2>; #size-cells = <2>; ranges; + wakeup-source; + mediatek,syscon-wakeup = <&pericfg 0x424 2>; status = "disabled"; usb_host1: usb@11280000 { @@ -1624,8 +1626,6 @@ <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>; clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck","xhci_ck"; interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>; - mediatek,syscon-wakeup = <&pericfg 0x424 2>; - wakeup-source; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi index 6b4b7a7cd35e..54e3ec168fa9 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi @@ -1391,7 +1391,6 @@ regulators { mt6315_6_vbuck1: vbuck1 { - regulator-compatible = "vbuck1"; regulator-name = "Vbcpu"; regulator-min-microvolt = <400000>; regulator-max-microvolt = <1193750>; @@ -1401,7 +1400,6 @@ }; mt6315_6_vbuck3: vbuck3 { - regulator-compatible = "vbuck3"; regulator-name = "Vlcpu"; regulator-min-microvolt = <400000>; regulator-max-microvolt = <1193750>; @@ -1418,7 +1416,6 @@ regulators { mt6315_7_vbuck1: vbuck1 { - regulator-compatible = "vbuck1"; regulator-name = "Vgpu"; regulator-min-microvolt = <400000>; regulator-max-microvolt = <800000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index b21663b46b51..e3b30543c2c6 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -1203,7 +1203,6 @@ regulators { mt6315_6_vbuck1: vbuck1 { - regulator-compatible = "vbuck1"; regulator-name = "Vbcpu"; regulator-min-microvolt = <400000>; regulator-max-microvolt = <1193750>; @@ -1221,7 +1220,6 @@ regulators { mt6315_7_vbuck1: vbuck1 { - regulator-compatible = "vbuck1"; regulator-name = "Vgpu"; regulator-min-microvolt = <400000>; regulator-max-microvolt = <1193750>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts index 9079e48aea23..f56aeb81c416 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts @@ -137,7 +137,6 @@ richtek,vinovp-microvolt = <14500000>; otg_vbus_regulator: usb-otg-vbus-regulator { - regulator-compatible = "usb-otg-vbus"; regulator-name = "usb-otg-vbus"; regulator-min-microvolt = <4425000>; regulator-max-microvolt = <5825000>; @@ -149,7 +148,6 @@ LDO_VIN3-supply = <&mt6360_buck2>; mt6360_buck1: buck1 { - regulator-compatible = "BUCK1"; regulator-name = "mt6360,buck1"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1300000>; @@ -160,7 +158,6 @@ }; mt6360_buck2: buck2 { - regulator-compatible = "BUCK2"; regulator-name = "mt6360,buck2"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1300000>; @@ -171,7 +168,6 @@ }; mt6360_ldo1: ldo1 { - regulator-compatible = "LDO1"; regulator-name = "mt6360,ldo1"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; @@ -180,7 +176,6 @@ }; mt6360_ldo2: ldo2 { - regulator-compatible = "LDO2"; regulator-name = "mt6360,ldo2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; @@ -189,7 +184,6 @@ }; mt6360_ldo3: ldo3 { - regulator-compatible = "LDO3"; regulator-name = "mt6360,ldo3"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; @@ -198,7 +192,6 @@ }; mt6360_ldo5: ldo5 { - regulator-compatible = "LDO5"; regulator-name = "mt6360,ldo5"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3600000>; @@ -207,7 +200,6 @@ }; mt6360_ldo6: ldo6 { - regulator-compatible = "LDO6"; regulator-name = "mt6360,ldo6"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <2100000>; @@ -216,7 +208,6 @@ }; mt6360_ldo7: ldo7 { - regulator-compatible = "LDO7"; regulator-name = "mt6360,ldo7"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <2100000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 5a087404ccc2..7ba30209ba9a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -1572,9 +1572,6 @@ phy-names = "pcie-phy"; power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P1>; - resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P1_SWRST>; - reset-names = "mac"; - #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc1 0>, @@ -2680,7 +2677,7 @@ }; ovl0: ovl@1c000000 { - compatible = "mediatek,mt8195-disp-ovl", "mediatek,mt8183-disp-ovl"; + compatible = "mediatek,mt8195-disp-ovl"; reg = <0 0x1c000000 0 0x1000>; interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>; power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi index 413496c92069..62c5b50d3c5f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi @@ -334,7 +334,8 @@ }; keypad: keypad@10010000 { - compatible = "mediatek,mt6779-keypad"; + compatible = "mediatek,mt8365-keypad", + "mediatek,mt6779-keypad"; reg = <0 0x10010000 0 0x1000>; wakeup-source; interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi index 9cbd6dd8f671..6b89505a6437 100644 --- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi @@ -144,10 +144,10 @@ #size-cells = <2>; ranges; - /* 128 KiB reserved for ARM Trusted Firmware (BL31) */ + /* 192 KiB reserved for ARM Trusted Firmware (BL31) */ bl31_secmon_reserved: secmon@43000000 { no-map; - reg = <0 0x43000000 0 0x20000>; + reg = <0 0x43000000 0 0x30000>; }; }; @@ -206,7 +206,7 @@ compatible = "mediatek,mt8516-wdt", "mediatek,mt6589-wdt"; reg = <0 0x10007000 0 0x1000>; - interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_FALLING>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; #reset-cells = <1>; }; @@ -268,7 +268,7 @@ interrupt-parent = <&gic>; interrupt-controller; reg = <0 0x10310000 0 0x1000>, - <0 0x10320000 0 0x1000>, + <0 0x1032f000 0 0x2000>, <0 0x10340000 0 0x2000>, <0 0x10360000 0 0x2000>; interrupts = <GIC_PPI 9 @@ -344,6 +344,7 @@ reg = <0 0x11009000 0 0x90>, <0 0x11000180 0 0x80>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>; + clock-div = <2>; clocks = <&topckgen CLK_TOP_I2C0>, <&topckgen CLK_TOP_APDMA>; clock-names = "main", "dma"; @@ -358,6 +359,7 @@ reg = <0 0x1100a000 0 0x90>, <0 0x11000200 0 0x80>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; + clock-div = <2>; clocks = <&topckgen CLK_TOP_I2C1>, <&topckgen CLK_TOP_APDMA>; clock-names = "main", "dma"; @@ -372,6 +374,7 @@ reg = <0 0x1100b000 0 0x90>, <0 0x11000280 0 0x80>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>; + clock-div = <2>; clocks = <&topckgen CLK_TOP_I2C2>, <&topckgen CLK_TOP_APDMA>; clock-names = "main", "dma"; diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi index ec8dfb3d1c6d..a356db5fcc5f 100644 --- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi +++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi @@ -47,7 +47,6 @@ }; &i2c0 { - clock-div = <2>; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; @@ -156,7 +155,6 @@ }; &i2c2 { - clock-div = <2>; pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index ac69eacf8a6b..be30072fb747 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -1794,7 +1794,7 @@ assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; resets = <&bpmp TEGRA234_RESET_SPI2>; reset-names = "spi"; - dmas = <&gpcdma 19>, <&gpcdma 19>; + dmas = <&gpcdma 16>, <&gpcdma 16>; dma-names = "rx", "tx"; dma-coherent; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 2cca20563a1d..0da076db0418 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -171,6 +171,9 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb + +sdm845-db845c-navigation-mezzanine-dtbs := sdm845-db845c.dtb sdm845-db845c-navigation-mezzanine.dtbo + dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c-navigation-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyln.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyp.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 961ceb83a91f..6f5f96853ba1 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -104,7 +104,7 @@ sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <32768>; + clock-frequency = <32764>; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi index 3fd64cafe99c..c844e01f9aa1 100644 --- a/arch/arm64/boot/dts/qcom/msm8939.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -33,7 +33,7 @@ sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <32768>; + clock-frequency = <32764>; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index c3262571520d..a7f9259dda6d 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -34,7 +34,7 @@ sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <32768>; + clock-frequency = <32764>; clock-output-names = "sleep_clk"; }; }; @@ -437,6 +437,15 @@ #size-cells = <1>; ranges; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "qusb2_phy", + "hs_phy_irq", + "ss_phy_irq"; + clocks = <&gcc GCC_USB30_MASTER_CLK>, <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, <&gcc GCC_USB30_SLEEP_CLK>, diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts index f8e9d90afab0..dbad8f57f2fa 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -64,7 +64,7 @@ }; led@1 { - reg = <0>; + reg = <1>; chan-name = "button-backlight1"; led-cur = /bits/ 8 <0x32>; max-cur = /bits/ 8 <0xc8>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 1f7cbb35886d..70ef8c83e7b9 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -3046,9 +3046,14 @@ #size-cells = <1>; ranges; - interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq"; + interrupt-names = "pwr_event", + "qusb2_phy", + "hs_phy_irq", + "ss_phy_irq"; clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, <&gcc GCC_USB30_MASTER_CLK>, diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi index 7d4d1f2767ed..7ae14c53ca8f 100644 --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -13,7 +13,7 @@ thermal-zones { pm6150_thermal: pm6150-thermal { polling-delay-passive = <100>; - polling-delay = <0>; + thermal-sensors = <&pm6150_temp>; trips { diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index d13a1ab7c20b..a20e9b9993b2 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -10,9 +10,6 @@ / { thermal-zones { pm6150l-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&pm6150l_temp>; trips { diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 2721f32dfb71..cbe469cc159e 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -28,7 +28,7 @@ sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <32768>; + clock-frequency = <32764>; }; }; diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts index 5a25cdec969e..409f06978931 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts @@ -31,7 +31,7 @@ sleep_clk: sleep-clk { compatible = "fixed-clock"; - clock-frequency = <32000>; + clock-frequency = <32764>; #clock-cells = <0>; }; }; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index 5def8c1154ce..331b6a76560d 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -492,7 +492,7 @@ }; &sleep_clk { - clock-frequency = <32000>; + clock-frequency = <32764>; }; &tlmm { diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts index 2a862c83309e..a3a7dcbc5e6d 100644 --- a/arch/arm64/boot/dts/qcom/qru1000-idp.dts +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts @@ -31,7 +31,7 @@ sleep_clk: sleep-clk { compatible = "fixed-clock"; - clock-frequency = <32000>; + clock-frequency = <32764>; #clock-cells = <0>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts index 81a7eeb9cfcd..2e87fd760dbd 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -5,828 +5,43 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/regulator/qcom,rpmh-regulator.h> - -#include "sa8775p.dtsi" -#include "sa8775p-pmics.dtsi" +#include "sa8775p-ride.dtsi" / { model = "Qualcomm SA8775P Ride"; compatible = "qcom,sa8775p-ride", "qcom,sa8775p"; - - aliases { - ethernet0 = ðernet0; - ethernet1 = ðernet1; - i2c11 = &i2c11; - i2c18 = &i2c18; - serial0 = &uart10; - serial1 = &uart12; - serial2 = &uart17; - spi16 = &spi16; - ufshc1 = &ufs_mem_hc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&apps_rsc { - regulators-0 { - compatible = "qcom,pmm8654au-rpmh-regulators"; - qcom,pmic-id = "a"; - - vreg_s4a: smps4 { - regulator-name = "vreg_s4a"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1816000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_s5a: smps5 { - regulator-name = "vreg_s5a"; - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <1996000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_s9a: smps9 { - regulator-name = "vreg_s9a"; - regulator-min-microvolt = <535000>; - regulator-max-microvolt = <1120000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l4a: ldo4 { - regulator-name = "vreg_l4a"; - regulator-min-microvolt = <788000>; - regulator-max-microvolt = <1050000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l5a: ldo5 { - regulator-name = "vreg_l5a"; - regulator-min-microvolt = <870000>; - regulator-max-microvolt = <950000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l6a: ldo6 { - regulator-name = "vreg_l6a"; - regulator-min-microvolt = <870000>; - regulator-max-microvolt = <970000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l7a: ldo7 { - regulator-name = "vreg_l7a"; - regulator-min-microvolt = <720000>; - regulator-max-microvolt = <950000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l8a: ldo8 { - regulator-name = "vreg_l8a"; - regulator-min-microvolt = <2504000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l9a: ldo9 { - regulator-name = "vreg_l9a"; - regulator-min-microvolt = <2970000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-1 { - compatible = "qcom,pmm8654au-rpmh-regulators"; - qcom,pmic-id = "c"; - - vreg_l1c: ldo1 { - regulator-name = "vreg_l1c"; - regulator-min-microvolt = <1140000>; - regulator-max-microvolt = <1260000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2c: ldo2 { - regulator-name = "vreg_l2c"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3c: ldo3 { - regulator-name = "vreg_l3c"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l4c: ldo4 { - regulator-name = "vreg_l4c"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - /* - * FIXME: This should have regulator-allow-set-load but - * we're getting an over-current fault from the PMIC - * when switching to LPM. - */ - }; - - vreg_l5c: ldo5 { - regulator-name = "vreg_l5c"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l6c: ldo6 { - regulator-name = "vreg_l6c"; - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <1980000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l7c: ldo7 { - regulator-name = "vreg_l7c"; - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l8c: ldo8 { - regulator-name = "vreg_l8c"; - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l9c: ldo9 { - regulator-name = "vreg_l9c"; - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <2700000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-2 { - compatible = "qcom,pmm8654au-rpmh-regulators"; - qcom,pmic-id = "e"; - - vreg_s4e: smps4 { - regulator-name = "vreg_s4e"; - regulator-min-microvolt = <970000>; - regulator-max-microvolt = <1520000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_s7e: smps7 { - regulator-name = "vreg_s7e"; - regulator-min-microvolt = <1010000>; - regulator-max-microvolt = <1170000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_s9e: smps9 { - regulator-name = "vreg_s9e"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <570000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l6e: ldo6 { - regulator-name = "vreg_l6e"; - regulator-min-microvolt = <1280000>; - regulator-max-microvolt = <1450000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l8e: ldo8 { - regulator-name = "vreg_l8e"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1950000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - }; }; ðernet0 { phy-mode = "sgmii"; - phy-handle = <&sgmii_phy0>; - - pinctrl-0 = <ðernet0_default>; - pinctrl-names = "default"; - - snps,mtl-rx-config = <&mtl_rx_setup>; - snps,mtl-tx-config = <&mtl_tx_setup>; - snps,ps-speed = <1000>; - - status = "okay"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - sgmii_phy0: phy@8 { - compatible = "ethernet-phy-id0141.0dd4"; - reg = <0x8>; - device_type = "ethernet-phy"; - reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>; - reset-assert-us = <11000>; - reset-deassert-us = <70000>; - }; - - sgmii_phy1: phy@a { - compatible = "ethernet-phy-id0141.0dd4"; - reg = <0xa>; - device_type = "ethernet-phy"; - reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>; - reset-assert-us = <11000>; - reset-deassert-us = <70000>; - }; - }; - - mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <4>; - snps,rx-sched-sp; - - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,route-up; - snps,priority = <0x1>; - }; - - queue1 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x1>; - snps,route-ptp; - }; - - queue2 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x2>; - snps,route-avcp; - }; - - queue3 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x3>; - snps,priority = <0xc>; - }; - }; - - mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <4>; - snps,tx-sched-sp; - - queue0 { - snps,dcb-algorithm; - }; - - queue1 { - snps,dcb-algorithm; - }; - - queue2 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - - queue3 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - }; }; ðernet1 { phy-mode = "sgmii"; - phy-handle = <&sgmii_phy1>; - - snps,mtl-rx-config = <&mtl_rx_setup1>; - snps,mtl-tx-config = <&mtl_tx_setup1>; - snps,ps-speed = <1000>; - - status = "okay"; - - mtl_rx_setup1: rx-queues-config { - snps,rx-queues-to-use = <4>; - snps,rx-sched-sp; - - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,route-up; - snps,priority = <0x1>; - }; - - queue1 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x1>; - snps,route-ptp; - }; - - queue2 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x2>; - snps,route-avcp; - }; - - queue3 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x3>; - snps,priority = <0xc>; - }; - }; - - mtl_tx_setup1: tx-queues-config { - snps,tx-queues-to-use = <4>; - snps,tx-sched-sp; - - queue0 { - snps,dcb-algorithm; - }; - - queue1 { - snps,dcb-algorithm; - }; - - queue2 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - - queue3 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - }; -}; - -&i2c11 { - clock-frequency = <400000>; - pinctrl-0 = <&qup_i2c11_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&i2c18 { - clock-frequency = <400000>; - pinctrl-0 = <&qup_i2c18_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&pmm8654au_0_gpios { - gpio-line-names = "DS_EN", - "POFF_COMPLETE", - "UFS0_VER_ID", - "FAST_POFF", - "DBU1_PON_DONE", - "AOSS_SLEEP", - "CAM_DES0_EN", - "CAM_DES1_EN", - "CAM_DES2_EN", - "CAM_DES3_EN", - "UEFI", - "ANALOG_PON_OPT"; -}; - -&pmm8654au_1_gpios { - gpio-line-names = "PMIC_C_ID0", - "PMIC_C_ID1", - "UFS1_VER_ID", - "IPA_PWR", - "", - "WLAN_DBU4_EN", - "WLAN_EN", - "BT_EN", - "USB2_PWR_EN", - "USB2_FAULT"; - - usb2_en_state: usb2-en-state { - pins = "gpio9"; - function = "normal"; - output-high; - power-source = <0>; - }; -}; - -&pmm8654au_2_gpios { - gpio-line-names = "PMIC_E_ID0", - "PMIC_E_ID1", - "USB0_PWR_EN", - "USB0_FAULT", - "SENSOR_IRQ_1", - "SENSOR_IRQ_2", - "SENSOR_RST", - "SGMIIO0_RST", - "SGMIIO1_RST", - "USB1_PWR_ENABLE", - "USB1_FAULT", - "VMON_SPX8"; - - usb0_en_state: usb0-en-state { - pins = "gpio3"; - function = "normal"; - output-high; - power-source = <0>; - }; - - usb1_en_state: usb1-en-state { - pins = "gpio10"; - function = "normal"; - output-high; - power-source = <0>; - }; -}; - -&pmm8654au_3_gpios { - gpio-line-names = "PMIC_G_ID0", - "PMIC_G_ID1", - "GNSS_RST", - "GNSS_EN", - "GNSS_BOOT_MODE"; -}; - -&qupv3_id_1 { - status = "okay"; -}; - -&qupv3_id_2 { - status = "okay"; }; -&serdes0 { - phy-supply = <&vreg_l5a>; - status = "okay"; -}; - -&serdes1 { - phy-supply = <&vreg_l5a>; - status = "okay"; -}; - -&sleep_clk { - clock-frequency = <32764>; -}; - -&spi16 { - pinctrl-0 = <&qup_spi16_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tlmm { - ethernet0_default: ethernet0-default-state { - ethernet0_mdc: ethernet0-mdc-pins { - pins = "gpio8"; - function = "emac0_mdc"; - drive-strength = <16>; - bias-pull-up; - }; - - ethernet0_mdio: ethernet0-mdio-pins { - pins = "gpio9"; - function = "emac0_mdio"; - drive-strength = <16>; - bias-pull-up; - }; - }; - - qup_uart10_default: qup-uart10-state { - pins = "gpio46", "gpio47"; - function = "qup1_se3"; - }; +&mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; - qup_spi16_default: qup-spi16-state { - pins = "gpio86", "gpio87", "gpio88", "gpio89"; - function = "qup2_se2"; - drive-strength = <6>; - bias-disable; + sgmii_phy0: phy@8 { + compatible = "ethernet-phy-id0141.0dd4"; + reg = <0x8>; + device_type = "ethernet-phy"; + interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; }; - qup_i2c11_default: qup-i2c11-state { - pins = "gpio48", "gpio49"; - function = "qup1_se4"; - drive-strength = <2>; - bias-pull-up; + sgmii_phy1: phy@a { + compatible = "ethernet-phy-id0141.0dd4"; + reg = <0xa>; + device_type = "ethernet-phy"; + interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; }; - - qup_i2c18_default: qup-i2c18-state { - pins = "gpio95", "gpio96"; - function = "qup2_se4"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_uart12_default: qup-uart12-state { - qup_uart12_cts: qup-uart12-cts-pins { - pins = "gpio52"; - function = "qup1_se5"; - bias-disable; - }; - - qup_uart12_rts: qup-uart12-rts-pins { - pins = "gpio53"; - function = "qup1_se5"; - bias-pull-down; - }; - - qup_uart12_tx: qup-uart12-tx-pins { - pins = "gpio54"; - function = "qup1_se5"; - bias-pull-up; - }; - - qup_uart12_rx: qup-uart12-rx-pins { - pins = "gpio55"; - function = "qup1_se5"; - bias-pull-down; - }; - }; - - qup_uart17_default: qup-uart17-state { - qup_uart17_cts: qup-uart17-cts-pins { - pins = "gpio91"; - function = "qup2_se3"; - bias-disable; - }; - - qup_uart17_rts: qup0-uart17-rts-pins { - pins = "gpio92"; - function = "qup2_se3"; - bias-pull-down; - }; - - qup_uart17_tx: qup0-uart17-tx-pins { - pins = "gpio93"; - function = "qup2_se3"; - bias-pull-up; - }; - - qup_uart17_rx: qup0-uart17-rx-pins { - pins = "gpio94"; - function = "qup2_se3"; - bias-pull-down; - }; - }; - - pcie0_default_state: pcie0-default-state { - perst-pins { - pins = "gpio2"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - clkreq-pins { - pins = "gpio1"; - function = "pcie0_clkreq"; - drive-strength = <2>; - bias-pull-up; - }; - - wake-pins { - pins = "gpio0"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - pcie1_default_state: pcie1-default-state { - perst-pins { - pins = "gpio4"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - clkreq-pins { - pins = "gpio3"; - function = "pcie1_clkreq"; - drive-strength = <2>; - bias-pull-up; - }; - - wake-pins { - pins = "gpio5"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; -}; - -&pcie0 { - perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie0_default_state>; - - status = "okay"; -}; - -&pcie1 { - perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie1_default_state>; - - status = "okay"; -}; - -&pcie0_phy { - vdda-phy-supply = <&vreg_l5a>; - vdda-pll-supply = <&vreg_l1c>; - - status = "okay"; -}; - -&pcie1_phy { - vdda-phy-supply = <&vreg_l5a>; - vdda-pll-supply = <&vreg_l1c>; - - status = "okay"; -}; - -&uart10 { - compatible = "qcom,geni-debug-uart"; - pinctrl-0 = <&qup_uart10_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&uart12 { - pinctrl-0 = <&qup_uart12_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&uart17 { - pinctrl-0 = <&qup_uart17_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&ufs_mem_hc { - reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; - vcc-supply = <&vreg_l8a>; - vcc-max-microamp = <1100000>; - vccq-supply = <&vreg_l4c>; - vccq-max-microamp = <1200000>; - - status = "okay"; -}; - -&ufs_mem_phy { - vdda-phy-supply = <&vreg_l4a>; - vdda-pll-supply = <&vreg_l1c>; - - status = "okay"; -}; - -&usb_0 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_en_state>; - - status = "okay"; -}; - -&usb_0_dwc3 { - dr_mode = "peripheral"; -}; - -&usb_0_hsphy { - vdda-pll-supply = <&vreg_l7a>; - vdda18-supply = <&vreg_l6c>; - vdda33-supply = <&vreg_l9a>; - - status = "okay"; -}; - -&usb_0_qmpphy { - vdda-phy-supply = <&vreg_l1c>; - vdda-pll-supply = <&vreg_l7a>; - - status = "okay"; -}; - -&usb_1 { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_en_state>; - - status = "okay"; -}; - -&usb_1_dwc3 { - dr_mode = "host"; -}; - -&usb_1_hsphy { - vdda-pll-supply = <&vreg_l7a>; - vdda18-supply = <&vreg_l6c>; - vdda33-supply = <&vreg_l9a>; - - status = "okay"; -}; - -&usb_1_qmpphy { - vdda-phy-supply = <&vreg_l1c>; - vdda-pll-supply = <&vreg_l7a>; - - status = "okay"; -}; - -&usb_2 { - pinctrl-names = "default"; - pinctrl-0 = <&usb2_en_state>; - - status = "okay"; -}; - -&usb_2_dwc3 { - dr_mode = "host"; -}; - -&usb_2_hsphy { - vdda-pll-supply = <&vreg_l7a>; - vdda18-supply = <&vreg_l6c>; - vdda33-supply = <&vreg_l9a>; - - status = "okay"; -}; - -&xo_board_clk { - clock-frequency = <38400000>; }; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi new file mode 100644 index 000000000000..864ad109371c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi @@ -0,0 +1,814 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sa8775p.dtsi" +#include "sa8775p-pmics.dtsi" + +/ { + aliases { + ethernet0 = ðernet0; + ethernet1 = ðernet1; + i2c11 = &i2c11; + i2c18 = &i2c18; + serial0 = &uart10; + serial1 = &uart12; + serial2 = &uart17; + spi16 = &spi16; + ufshc1 = &ufs_mem_hc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s4a: smps4 { + regulator-name = "vreg_s4a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1816000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a: smps5 { + regulator-name = "vreg_s5a"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1996000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9a: smps9 { + regulator-name = "vreg_s9a"; + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4a: ldo4 { + regulator-name = "vreg_l4a"; + regulator-min-microvolt = <788000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a: ldo6 { + regulator-name = "vreg_l6a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a: ldo8 { + regulator-name = "vreg_l8a"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a: ldo9 { + regulator-name = "vreg_l9a"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + /* + * FIXME: This should have regulator-allow-set-load but + * we're getting an over-current fault from the PMIC + * when switching to LPM. + */ + }; + + vreg_l5c: ldo5 { + regulator-name = "vreg_l5c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_s4e: smps4 { + regulator-name = "vreg_s4e"; + regulator-min-microvolt = <970000>; + regulator-max-microvolt = <1520000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s7e: smps7 { + regulator-name = "vreg_s7e"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9e: smps9 { + regulator-name = "vreg_s9e"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <570000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6e: ldo6 { + regulator-name = "vreg_l6e"; + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <1450000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8e: ldo8 { + regulator-name = "vreg_l8e"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +ðernet0 { + phy-handle = <&sgmii_phy0>; + + pinctrl-0 = <ðernet0_default>; + pinctrl-names = "default"; + + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + snps,ps-speed = <1000>; + + status = "okay"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <4>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +ðernet1 { + phy-handle = <&sgmii_phy1>; + + snps,mtl-rx-config = <&mtl_rx_setup1>; + snps,mtl-tx-config = <&mtl_tx_setup1>; + snps,ps-speed = <1000>; + + status = "okay"; + + mtl_rx_setup1: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup1: tx-queues-config { + snps,tx-queues-to-use = <4>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +&i2c11 { + clock-frequency = <400000>; + pinctrl-0 = <&qup_i2c11_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c18 { + clock-frequency = <400000>; + pinctrl-0 = <&qup_i2c18_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pmm8654au_0_gpios { + gpio-line-names = "DS_EN", + "POFF_COMPLETE", + "UFS0_VER_ID", + "FAST_POFF", + "DBU1_PON_DONE", + "AOSS_SLEEP", + "CAM_DES0_EN", + "CAM_DES1_EN", + "CAM_DES2_EN", + "CAM_DES3_EN", + "UEFI", + "ANALOG_PON_OPT"; +}; + +&pmm8654au_0_pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pmm8654au_1_gpios { + gpio-line-names = "PMIC_C_ID0", + "PMIC_C_ID1", + "UFS1_VER_ID", + "IPA_PWR", + "", + "WLAN_DBU4_EN", + "WLAN_EN", + "BT_EN", + "USB2_PWR_EN", + "USB2_FAULT"; + + usb2_en_state: usb2-en-state { + pins = "gpio9"; + function = "normal"; + output-high; + power-source = <0>; + }; +}; + +&pmm8654au_2_gpios { + gpio-line-names = "PMIC_E_ID0", + "PMIC_E_ID1", + "USB0_PWR_EN", + "USB0_FAULT", + "SENSOR_IRQ_1", + "SENSOR_IRQ_2", + "SENSOR_RST", + "SGMIIO0_RST", + "SGMIIO1_RST", + "USB1_PWR_ENABLE", + "USB1_FAULT", + "VMON_SPX8"; + + usb0_en_state: usb0-en-state { + pins = "gpio3"; + function = "normal"; + output-high; + power-source = <0>; + }; + + usb1_en_state: usb1-en-state { + pins = "gpio10"; + function = "normal"; + output-high; + power-source = <0>; + }; +}; + +&pmm8654au_3_gpios { + gpio-line-names = "PMIC_G_ID0", + "PMIC_G_ID1", + "GNSS_RST", + "GNSS_EN", + "GNSS_BOOT_MODE"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&serdes0 { + phy-supply = <&vreg_l5a>; + status = "okay"; +}; + +&serdes1 { + phy-supply = <&vreg_l5a>; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&spi16 { + pinctrl-0 = <&qup_spi16_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tlmm { + ethernet0_default: ethernet0-default-state { + ethernet0_mdc: ethernet0-mdc-pins { + pins = "gpio8"; + function = "emac0_mdc"; + drive-strength = <16>; + bias-pull-up; + }; + + ethernet0_mdio: ethernet0-mdio-pins { + pins = "gpio9"; + function = "emac0_mdio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + qup_uart10_default: qup-uart10-state { + pins = "gpio46", "gpio47"; + function = "qup1_se3"; + }; + + qup_spi16_default: qup-spi16-state { + pins = "gpio86", "gpio87", "gpio88", "gpio89"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c11_default: qup-i2c11-state { + pins = "gpio48", "gpio49"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c18_default: qup-i2c18-state { + pins = "gpio95", "gpio96"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart12_default: qup-uart12-state { + qup_uart12_cts: qup-uart12-cts-pins { + pins = "gpio52"; + function = "qup1_se5"; + bias-disable; + }; + + qup_uart12_rts: qup-uart12-rts-pins { + pins = "gpio53"; + function = "qup1_se5"; + bias-pull-down; + }; + + qup_uart12_tx: qup-uart12-tx-pins { + pins = "gpio54"; + function = "qup1_se5"; + bias-pull-up; + }; + + qup_uart12_rx: qup-uart12-rx-pins { + pins = "gpio55"; + function = "qup1_se5"; + bias-pull-down; + }; + }; + + qup_uart17_default: qup-uart17-state { + qup_uart17_cts: qup-uart17-cts-pins { + pins = "gpio91"; + function = "qup2_se3"; + bias-disable; + }; + + qup_uart17_rts: qup0-uart17-rts-pins { + pins = "gpio92"; + function = "qup2_se3"; + bias-pull-down; + }; + + qup_uart17_tx: qup0-uart17-tx-pins { + pins = "gpio93"; + function = "qup2_se3"; + bias-pull-up; + }; + + qup_uart17_rx: qup0-uart17-rx-pins { + pins = "gpio94"; + function = "qup2_se3"; + bias-pull-down; + }; + }; + + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio1"; + function = "pcie0_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio0"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst-pins { + pins = "gpio4"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio3"; + function = "pcie1_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; + +&pcie0 { + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "okay"; +}; + +&pcie1 { + perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&uart10 { + compatible = "qcom,geni-debug-uart"; + pinctrl-0 = <&qup_uart10_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart12 { + pinctrl-0 = <&qup_uart12_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart17 { + pinctrl-0 = <&qup_uart17_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l8a>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l4c>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&usb_0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_en_state>; + + status = "okay"; +}; + +&usb_0_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&usb_1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_en_state>; + + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&usb_2 { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_en_state>; + + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi b/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi index ee35a454dbf6..59162b3afcb8 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi @@ -6,82 +6,82 @@ * by Qualcomm firmware. */ -&CPU0 { +&cpu0 { /delete-property/ power-domains; /delete-property/ power-domain-names; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + cpu-idle-states = <&little_cpu_sleep_0 + &little_cpu_sleep_1 + &cluster_sleep_0>; }; -&CPU1 { +&cpu1 { /delete-property/ power-domains; /delete-property/ power-domain-names; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + cpu-idle-states = <&little_cpu_sleep_0 + &little_cpu_sleep_1 + &cluster_sleep_0>; }; -&CPU2 { +&cpu2 { /delete-property/ power-domains; /delete-property/ power-domain-names; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + cpu-idle-states = <&little_cpu_sleep_0 + &little_cpu_sleep_1 + &cluster_sleep_0>; }; -&CPU3 { +&cpu3 { /delete-property/ power-domains; /delete-property/ power-domain-names; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + cpu-idle-states = <&little_cpu_sleep_0 + &little_cpu_sleep_1 + &cluster_sleep_0>; }; -&CPU4 { +&cpu4 { /delete-property/ power-domains; /delete-property/ power-domain-names; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + cpu-idle-states = <&little_cpu_sleep_0 + &little_cpu_sleep_1 + &cluster_sleep_0>; }; -&CPU5 { +&cpu5 { /delete-property/ power-domains; /delete-property/ power-domain-names; - cpu-idle-states = <&LITTLE_CPU_SLEEP_0 - &LITTLE_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + cpu-idle-states = <&little_cpu_sleep_0 + &little_cpu_sleep_1 + &cluster_sleep_0>; }; -&CPU6 { +&cpu6 { /delete-property/ power-domains; /delete-property/ power-domain-names; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + cpu-idle-states = <&big_cpu_sleep_0 + &big_cpu_sleep_1 + &cluster_sleep_0>; }; -&CPU7 { +&cpu7 { /delete-property/ power-domains; /delete-property/ power-domain-names; - cpu-idle-states = <&BIG_CPU_SLEEP_0 - &BIG_CPU_SLEEP_1 - &CLUSTER_SLEEP_0>; + cpu-idle-states = <&big_cpu_sleep_0 + &big_cpu_sleep_1 + &cluster_sleep_0>; }; /delete-node/ &domain_idle_states; &idle_states { - CLUSTER_SLEEP_0: cluster-sleep-0 { + cluster_sleep_0: cluster-sleep-0 { compatible = "arm,idle-state"; idle-state-name = "cluster-power-down"; arm,psci-suspend-param = <0x40003444>; @@ -92,15 +92,15 @@ }; }; -/delete-node/ &CPU_PD0; -/delete-node/ &CPU_PD1; -/delete-node/ &CPU_PD2; -/delete-node/ &CPU_PD3; -/delete-node/ &CPU_PD4; -/delete-node/ &CPU_PD5; -/delete-node/ &CPU_PD6; -/delete-node/ &CPU_PD7; -/delete-node/ &CLUSTER_PD; +/delete-node/ &cpu_pd0; +/delete-node/ &cpu_pd1; +/delete-node/ &cpu_pd2; +/delete-node/ &cpu_pd3; +/delete-node/ &cpu_pd4; +/delete-node/ &cpu_pd5; +/delete-node/ &cpu_pd6; +/delete-node/ &cpu_pd7; +/delete-node/ &cluster_pd; &apps_rsc { /delete-property/ power-domains; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi index a532cc4aac47..d338a8a0a9a9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -26,7 +26,6 @@ thermal-zones { skin_temp_thermal: skin-temp-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&pm6150_adc_tm 1>; sustainable-power = <965>; @@ -54,14 +53,14 @@ cooling-maps { map0 { trip = <&skin_temp_alert0>; - cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&skin_temp_alert1>; - cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi index b27dcd2ec856..4452d04e4c54 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -43,7 +43,6 @@ thermal-zones { skin_temp_thermal: skin-temp-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&pm6150_adc_tm 1>; sustainable-power = <965>; @@ -71,14 +70,14 @@ cooling-maps { map0 { trip = <&skin_temp_alert0>; - cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&skin_temp_alert1>; - cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi index fd944842dd6c..7a05d502620f 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi @@ -12,14 +12,11 @@ / { thermal-zones { - 5v-choke-thermal { - polling-delay-passive = <0>; - polling-delay = <250>; - + choke-5v-thermal { thermal-sensors = <&pm6150_adc_tm 1>; trips { - 5v-choke-crit { + choke-5v-crit { temperature = <125000>; hysteresis = <1000>; type = "critical"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi index 62ab6427dd65..e1e31e0fc0e1 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi @@ -84,6 +84,7 @@ pinctrl-names = "default"; pinctrl-0 = <&lcd_rst>; avdd-supply = <&ppvar_lcd>; + avee-supply = <&ppvar_lcd>; pp1800-supply = <&v1p8_disp>; pp3300-supply = <&pp3300_dx_edp>; backlight = <&backlight>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi index 2f6a340ddd2a..38335df3a275 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi @@ -50,7 +50,6 @@ thermal-zones { skin_temp_thermal: skin-temp-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&pm6150_adc_tm 1>; sustainable-power = <574>; @@ -78,14 +77,14 @@ cooling-maps { map0 { trip = <&skin_temp_alert0>; - cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&skin_temp_alert1>; - cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index c2f5e9f6679d..906e61642270 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -21,9 +21,6 @@ / { thermal-zones { charger_thermal: charger-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&pm6150_adc_tm 0>; trips { diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 68b1c017a9fd..7758136d71d6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -74,28 +74,28 @@ #address-cells = <2>; #size-cells = <0>; - CPU0: cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x0>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; - power-domains = <&CPU_PD0>; + power-domains = <&cpu_pd0>; power-domain-names = "psci"; capacity-dmips-mhz = <415>; dynamic-power-coefficient = <137>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; - next-level-cache = <&L2_0>; + next-level-cache = <&l2_0>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; - L2_0: l2-cache { + l2_0: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; - next-level-cache = <&L3_0>; - L3_0: l3-cache { + next-level-cache = <&l3_0>; + l3_0: l3-cache { compatible = "cache"; cache-level = <3>; cache-unified; @@ -103,206 +103,206 @@ }; }; - CPU1: cpu@100 { + cpu1: cpu@100 { device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x100>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; - power-domains = <&CPU_PD1>; + power-domains = <&cpu_pd1>; power-domain-names = "psci"; capacity-dmips-mhz = <415>; dynamic-power-coefficient = <137>; - next-level-cache = <&L2_100>; + next-level-cache = <&l2_100>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; - L2_100: l2-cache { + l2_100: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; - next-level-cache = <&L3_0>; + next-level-cache = <&l3_0>; }; }; - CPU2: cpu@200 { + cpu2: cpu@200 { device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x200>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; - power-domains = <&CPU_PD2>; + power-domains = <&cpu_pd2>; power-domain-names = "psci"; capacity-dmips-mhz = <415>; dynamic-power-coefficient = <137>; - next-level-cache = <&L2_200>; + next-level-cache = <&l2_200>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; - L2_200: l2-cache { + l2_200: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; - next-level-cache = <&L3_0>; + next-level-cache = <&l3_0>; }; }; - CPU3: cpu@300 { + cpu3: cpu@300 { device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x300>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; - power-domains = <&CPU_PD3>; + power-domains = <&cpu_pd3>; power-domain-names = "psci"; capacity-dmips-mhz = <415>; dynamic-power-coefficient = <137>; - next-level-cache = <&L2_300>; + next-level-cache = <&l2_300>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; - L2_300: l2-cache { + l2_300: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; - next-level-cache = <&L3_0>; + next-level-cache = <&l3_0>; }; }; - CPU4: cpu@400 { + cpu4: cpu@400 { device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x400>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; - power-domains = <&CPU_PD4>; + power-domains = <&cpu_pd4>; power-domain-names = "psci"; capacity-dmips-mhz = <415>; dynamic-power-coefficient = <137>; - next-level-cache = <&L2_400>; + next-level-cache = <&l2_400>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; - L2_400: l2-cache { + l2_400: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; - next-level-cache = <&L3_0>; + next-level-cache = <&l3_0>; }; }; - CPU5: cpu@500 { + cpu5: cpu@500 { device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x500>; clocks = <&cpufreq_hw 0>; enable-method = "psci"; - power-domains = <&CPU_PD5>; + power-domains = <&cpu_pd5>; power-domain-names = "psci"; capacity-dmips-mhz = <415>; dynamic-power-coefficient = <137>; - next-level-cache = <&L2_500>; + next-level-cache = <&l2_500>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; - L2_500: l2-cache { + l2_500: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; - next-level-cache = <&L3_0>; + next-level-cache = <&l3_0>; }; }; - CPU6: cpu@600 { + cpu6: cpu@600 { device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x600>; clocks = <&cpufreq_hw 1>; enable-method = "psci"; - power-domains = <&CPU_PD6>; + power-domains = <&cpu_pd6>; power-domain-names = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <480>; - next-level-cache = <&L2_600>; + next-level-cache = <&l2_600>; operating-points-v2 = <&cpu6_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 1>; - L2_600: l2-cache { + l2_600: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; - next-level-cache = <&L3_0>; + next-level-cache = <&l3_0>; }; }; - CPU7: cpu@700 { + cpu7: cpu@700 { device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x700>; clocks = <&cpufreq_hw 1>; enable-method = "psci"; - power-domains = <&CPU_PD7>; + power-domains = <&cpu_pd7>; power-domain-names = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <480>; - next-level-cache = <&L2_700>; + next-level-cache = <&l2_700>; operating-points-v2 = <&cpu6_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 1>; - L2_700: l2-cache { + l2_700: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; - next-level-cache = <&L3_0>; + next-level-cache = <&l3_0>; }; }; cpu-map { cluster0 { core0 { - cpu = <&CPU0>; + cpu = <&cpu0>; }; core1 { - cpu = <&CPU1>; + cpu = <&cpu1>; }; core2 { - cpu = <&CPU2>; + cpu = <&cpu2>; }; core3 { - cpu = <&CPU3>; + cpu = <&cpu3>; }; core4 { - cpu = <&CPU4>; + cpu = <&cpu4>; }; core5 { - cpu = <&CPU5>; + cpu = <&cpu5>; }; core6 { - cpu = <&CPU6>; + cpu = <&cpu6>; }; core7 { - cpu = <&CPU7>; + cpu = <&cpu7>; }; }; }; @@ -310,7 +310,7 @@ idle_states: idle-states { entry-method = "psci"; - LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + little_cpu_sleep_0: cpu-sleep-0-0 { compatible = "arm,idle-state"; idle-state-name = "little-power-down"; arm,psci-suspend-param = <0x40000003>; @@ -320,7 +320,7 @@ local-timer-stop; }; - LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + little_cpu_sleep_1: cpu-sleep-0-1 { compatible = "arm,idle-state"; idle-state-name = "little-rail-power-down"; arm,psci-suspend-param = <0x40000004>; @@ -330,7 +330,7 @@ local-timer-stop; }; - BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + big_cpu_sleep_0: cpu-sleep-1-0 { compatible = "arm,idle-state"; idle-state-name = "big-power-down"; arm,psci-suspend-param = <0x40000003>; @@ -340,7 +340,7 @@ local-timer-stop; }; - BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + big_cpu_sleep_1: cpu-sleep-1-1 { compatible = "arm,idle-state"; idle-state-name = "big-rail-power-down"; arm,psci-suspend-param = <0x40000004>; @@ -352,7 +352,7 @@ }; domain_idle_states: domain-idle-states { - CLUSTER_SLEEP_PC: cluster-sleep-0 { + cluster_sleep_pc: cluster-sleep-0 { compatible = "domain-idle-state"; idle-state-name = "cluster-l3-power-collapse"; arm,psci-suspend-param = <0x41000044>; @@ -361,7 +361,7 @@ min-residency-us = <6118>; }; - CLUSTER_SLEEP_CX_RET: cluster-sleep-1 { + cluster_sleep_cx_ret: cluster-sleep-1 { compatible = "domain-idle-state"; idle-state-name = "cluster-cx-retention"; arm,psci-suspend-param = <0x41001244>; @@ -370,7 +370,7 @@ min-residency-us = <8467>; }; - CLUSTER_AOSS_SLEEP: cluster-sleep-2 { + cluster_aoss_sleep: cluster-sleep-2 { compatible = "domain-idle-state"; idle-state-name = "cluster-power-down"; arm,psci-suspend-param = <0x4100b244>; @@ -580,59 +580,59 @@ compatible = "arm,psci-1.0"; method = "smc"; - CPU_PD0: cpu0 { + cpu_pd0: power-domain-cpu0 { #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; }; - CPU_PD1: cpu1 { + cpu_pd1: power-domain-cpu1 { #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; }; - CPU_PD2: cpu2 { + cpu_pd2: power-domain-cpu2 { #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; }; - CPU_PD3: cpu3 { + cpu_pd3: power-domain-cpu3 { #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; }; - CPU_PD4: cpu4 { + cpu_pd4: power-domain-cpu4 { #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; }; - CPU_PD5: cpu5 { + cpu_pd5: power-domain-cpu5 { #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; }; - CPU_PD6: cpu6 { + cpu_pd6: power-domain-cpu6 { #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + power-domains = <&cluster_pd>; + domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; }; - CPU_PD7: cpu7 { + cpu_pd7: power-domain-cpu7 { #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; + power-domains = <&cluster_pd>; + domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; }; - CLUSTER_PD: cpu-cluster0 { + cluster_pd: power-domain-cluster { #power-domain-cells = <0>; - domain-idle-states = <&CLUSTER_SLEEP_PC - &CLUSTER_SLEEP_CX_RET - &CLUSTER_AOSS_SLEEP>; + domain-idle-states = <&cluster_sleep_pc + &cluster_sleep_cx_ret + &cluster_aoss_sleep>; }; }; @@ -2465,7 +2465,7 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07040000 0 0x1000>; - cpu = <&CPU0>; + cpu = <&cpu0>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; @@ -2485,7 +2485,7 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07140000 0 0x1000>; - cpu = <&CPU1>; + cpu = <&cpu1>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; @@ -2505,7 +2505,7 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07240000 0 0x1000>; - cpu = <&CPU2>; + cpu = <&cpu2>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; @@ -2525,7 +2525,7 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07340000 0 0x1000>; - cpu = <&CPU3>; + cpu = <&cpu3>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; @@ -2545,7 +2545,7 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07440000 0 0x1000>; - cpu = <&CPU4>; + cpu = <&cpu4>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; @@ -2565,7 +2565,7 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07540000 0 0x1000>; - cpu = <&CPU5>; + cpu = <&cpu5>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; @@ -2585,7 +2585,7 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07640000 0 0x1000>; - cpu = <&CPU6>; + cpu = <&cpu6>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; @@ -2605,7 +2605,7 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07740000 0 0x1000>; - cpu = <&CPU7>; + cpu = <&cpu7>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; @@ -3645,7 +3645,7 @@ <SLEEP_TCS 3>, <WAKE_TCS 3>, <CONTROL_TCS 1>; - power-domains = <&CLUSTER_PD>; + power-domains = <&cluster_pd>; rpmhcc: clock-controller { compatible = "qcom,sc7180-rpmh-clk"; @@ -3827,7 +3827,6 @@ thermal-zones { cpu0_thermal: cpu0-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 1>; sustainable-power = <1052>; @@ -3855,28 +3854,27 @@ cooling-maps { map0 { trip = <&cpu0_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu0_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu1_thermal: cpu1-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 2>; sustainable-power = <1052>; @@ -3904,28 +3902,27 @@ cooling-maps { map0 { trip = <&cpu1_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu1_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu2_thermal: cpu2-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 3>; sustainable-power = <1052>; @@ -3953,28 +3950,27 @@ cooling-maps { map0 { trip = <&cpu2_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu2_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu3_thermal: cpu3-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 4>; sustainable-power = <1052>; @@ -4002,28 +3998,27 @@ cooling-maps { map0 { trip = <&cpu3_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu3_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu4_thermal: cpu4-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 5>; sustainable-power = <1052>; @@ -4051,28 +4046,27 @@ cooling-maps { map0 { trip = <&cpu4_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu4_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu5_thermal: cpu5-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 6>; sustainable-power = <1052>; @@ -4100,28 +4094,27 @@ cooling-maps { map0 { trip = <&cpu5_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu5_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu6_thermal: cpu6-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 9>; sustainable-power = <1425>; @@ -4149,20 +4142,19 @@ cooling-maps { map0 { trip = <&cpu6_alert0>; - cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu6_alert1>; - cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu7_thermal: cpu7-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 10>; sustainable-power = <1425>; @@ -4190,20 +4182,19 @@ cooling-maps { map0 { trip = <&cpu7_alert0>; - cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu7_alert1>; - cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu8_thermal: cpu8-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 11>; sustainable-power = <1425>; @@ -4231,20 +4222,19 @@ cooling-maps { map0 { trip = <&cpu8_alert0>; - cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu8_alert1>; - cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu9_thermal: cpu9-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 12>; sustainable-power = <1425>; @@ -4272,20 +4262,19 @@ cooling-maps { map0 { trip = <&cpu9_alert0>; - cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu9_alert1>; - cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; aoss0-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 0>; @@ -4306,7 +4295,6 @@ cpuss0-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 7>; @@ -4326,7 +4314,6 @@ cpuss1-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 8>; @@ -4346,7 +4333,6 @@ gpuss0-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 13>; @@ -4374,7 +4360,6 @@ gpuss1-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens0 14>; @@ -4402,7 +4387,6 @@ aoss1-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 0>; @@ -4423,7 +4407,6 @@ cwlan-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 1>; @@ -4444,7 +4427,6 @@ audio-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 2>; @@ -4465,7 +4447,6 @@ ddr-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 3>; @@ -4486,7 +4467,6 @@ q6-hvx-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 4>; @@ -4507,7 +4487,6 @@ camera-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 5>; @@ -4528,7 +4507,6 @@ mdm-core-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 6>; @@ -4549,7 +4527,6 @@ mdm-dsp-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 7>; @@ -4570,7 +4547,6 @@ npu-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 8>; @@ -4591,7 +4567,6 @@ video-thermal { polling-delay-passive = <250>; - polling-delay = <0>; thermal-sensors = <&tsens1 9>; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 149c7962f2cb..81e95604ef98 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -80,7 +80,7 @@ sleep_clk: sleep-clk { compatible = "fixed-clock"; - clock-frequency = <32000>; + clock-frequency = <32764>; #clock-cells = <0>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 6425c74edd60..3e70e79ce24b 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -2642,7 +2642,7 @@ remoteproc_adsp: remoteproc@3000000 { compatible = "qcom,sc8280xp-adsp-pas"; - reg = <0 0x03000000 0 0x100>; + reg = <0 0x03000000 0 0x10000>; interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, @@ -4399,7 +4399,7 @@ remoteproc_nsp0: remoteproc@1b300000 { compatible = "qcom,sc8280xp-nsp0-pas"; - reg = <0 0x1b300000 0 0x100>; + reg = <0 0x1b300000 0 0x10000>; interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>, @@ -4530,7 +4530,7 @@ remoteproc_nsp1: remoteproc@21300000 { compatible = "qcom,sc8280xp-nsp1-pas"; - reg = <0 0x21300000 0 0x100>; + reg = <0 0x21300000 0 0x10000>; interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>, <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>, diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso index a21caa6f3fa2..51f1a4883ab8 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso @@ -4,8 +4,10 @@ */ /dts-v1/; +/plugin/; -#include "sdm845-db845c.dts" +#include <dt-bindings/clock/qcom,camcc-sdm845.h> +#include <dt-bindings/gpio/gpio.h> &camss { vdda-phy-supply = <&vreg_l1a_0p875>; @@ -28,6 +30,9 @@ }; &cci_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + camera@10 { compatible = "ovti,ov8856"; reg = <0x10>; @@ -63,42 +68,3 @@ }; }; }; - -&cci_i2c1 { - camera@60 { - compatible = "ovti,ov7251"; - - /* I2C address as per ov7251.txt linux documentation */ - reg = <0x60>; - - /* CAM3_RST_N */ - enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&cam3_default>; - - clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; - clock-names = "xclk"; - clock-frequency = <24000000>; - - /* - * The &vreg_s4a_1p8 trace always powered on. - * - * The 2.8V vdda-supply regulator is enabled when the - * vreg_s4a_1p8 trace is pulled high. - * It too is represented by a fixed regulator. - * - * No 1.2V vddd-supply regulator is used. - */ - vdddo-supply = <&vreg_lvs1a_1p8>; - vdda-supply = <&cam3_avdd_2v8>; - - status = "disabled"; - - port { - ov7251_ep: endpoint { - data-lanes = <0 1>; -/* remote-endpoint = <&csiphy3_ep>; */ - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index dcdc8a0cd181..4ea693a07585 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -4244,16 +4244,16 @@ "vfe1", "vfe_lite"; - interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>; interrupt-names = "csid0", "csid1", "csid2", diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi index e180aa4023ec..0d1b5712c506 100644 --- a/arch/arm64/boot/dts/qcom/sdx75.dtsi +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi @@ -29,7 +29,7 @@ sleep_clk: sleep-clk { compatible = "fixed-clock"; - clock-frequency = <32000>; + clock-frequency = <32764>; #clock-cells = <0>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi index c4e5b33f5169..51240f45c8e8 100644 --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi @@ -23,7 +23,7 @@ sleep_clk: sleep-clk { compatible = "fixed-clock"; - clock-frequency = <32000>; + clock-frequency = <32764>; #clock-cells = <0>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 07081088ba14..2b2c55132f67 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -28,7 +28,7 @@ sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <32000>; + clock-frequency = <32764>; clock-output-names = "sleep_clk"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index e56f7ea4ebc6..c5f7715626a0 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -29,7 +29,7 @@ sleep_clk: sleep-clk { compatible = "fixed-clock"; - clock-frequency = <32000>; + clock-frequency = <32764>; #clock-cells = <0>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm7125.dtsi b/arch/arm64/boot/dts/qcom/sm7125.dtsi new file mode 100644 index 000000000000..a53145a610a3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7125.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +#include "sc7180.dtsi" + +/* SM7125 uses Kryo 465 instead of Kryo 468 */ +&cpu0 { compatible = "qcom,kryo465"; }; +&cpu1 { compatible = "qcom,kryo465"; }; +&cpu2 { compatible = "qcom,kryo465"; }; +&cpu3 { compatible = "qcom,kryo465"; }; +&cpu4 { compatible = "qcom,kryo465"; }; +&cpu5 { compatible = "qcom,kryo465"; }; +&cpu6 { compatible = "qcom,kryo465"; }; +&cpu7 { compatible = "qcom,kryo465"; }; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index 18171c5d8a38..c010e86134ff 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -26,7 +26,7 @@ chassis-type = "handset"; /* required for bootloader to select correct board */ - qcom,msm-id = <434 0x10000>, <459 0x10000>; + qcom,msm-id = <459 0x10000>; qcom,board-id = <8 32>; aliases { diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts index b039773c4465..a1323a8b8e6b 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts @@ -376,8 +376,8 @@ pinctrl-0 = <&da7280_intr_default>; dlg,actuator-type = "LRA"; - dlg,dlg,const-op-mode = <1>; - dlg,dlg,periodic-op-mode = <1>; + dlg,const-op-mode = <1>; + dlg,periodic-op-mode = <1>; dlg,nom-microvolt = <2000000>; dlg,abs-max-microvolt = <2000000>; dlg,imax-microamp = <129000>; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index b522d19f3a13..21bbffc4e5a2 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -85,7 +85,7 @@ sleep_clk: sleep-clk { compatible = "fixed-clock"; - clock-frequency = <32768>; + clock-frequency = <32764>; #clock-cells = <0>; }; }; @@ -4121,20 +4121,20 @@ "vfe_lite0", "vfe_lite1"; - interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>; interrupt-names = "csiphy0", "csiphy1", "csiphy2", diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index d4f1b36c7aeb..dded95fa52f0 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -40,7 +40,7 @@ sleep_clk: sleep-clk { compatible = "fixed-clock"; - clock-frequency = <32000>; + clock-frequency = <32764>; #clock-cells = <0>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index a34f460240a0..007689d7f4fa 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -40,7 +40,7 @@ sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <32000>; + clock-frequency = <32764>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index a9b47ab92a02..f156167b4e8a 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -23,7 +23,6 @@ interrupt-controller; reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ <0x00 0x01880000 0x00 0xc0000>, /* GICR */ - <0x00 0x01880000 0x00 0xc0000>, /* GICR */ <0x01 0x00000000 0x00 0x2000>, /* GICC */ <0x01 0x00010000 0x00 0x1000>, /* GICH */ <0x01 0x00020000 0x00 0x2000>; /* GICV */ diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi index de36abb243f1..1497f7c8adfa 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -18,7 +18,6 @@ compatible = "arm,gic-v3"; reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ <0x00 0x01880000 0x00 0xc0000>, /* GICR */ - <0x00 0x01880000 0x00 0xc0000>, /* GICR */ <0x01 0x00000000 0x00 0x2000>, /* GICC */ <0x01 0x00010000 0x00 0x1000>, /* GICH */ <0x01 0x00020000 0x00 0x2000>; /* GICV */ diff --git a/arch/hexagon/include/asm/cmpxchg.h b/arch/hexagon/include/asm/cmpxchg.h index bf6cf5579cf4..9c58fb81f7fd 100644 --- a/arch/hexagon/include/asm/cmpxchg.h +++ b/arch/hexagon/include/asm/cmpxchg.h @@ -56,7 +56,7 @@ __arch_xchg(unsigned long x, volatile void *ptr, int size) __typeof__(ptr) __ptr = (ptr); \ __typeof__(*(ptr)) __old = (old); \ __typeof__(*(ptr)) __new = (new); \ - __typeof__(*(ptr)) __oldval = 0; \ + __typeof__(*(ptr)) __oldval = (__typeof__(*(ptr))) 0; \ \ asm volatile( \ "1: %0 = memw_locked(%1);\n" \ diff --git a/arch/hexagon/kernel/traps.c b/arch/hexagon/kernel/traps.c index 6447763ce5a9..b7e394cebe20 100644 --- a/arch/hexagon/kernel/traps.c +++ b/arch/hexagon/kernel/traps.c @@ -195,8 +195,10 @@ int die(const char *str, struct pt_regs *regs, long err) printk(KERN_EMERG "Oops: %s[#%d]:\n", str, ++die.counter); if (notify_die(DIE_OOPS, str, regs, err, pt_cause(regs), SIGSEGV) == - NOTIFY_STOP) + NOTIFY_STOP) { + spin_unlock_irq(&die.lock); return 1; + } print_modules(); show_regs(regs); diff --git a/arch/loongarch/include/asm/hw_breakpoint.h b/arch/loongarch/include/asm/hw_breakpoint.h index d78330916bd1..13b2462f3d8c 100644 --- a/arch/loongarch/include/asm/hw_breakpoint.h +++ b/arch/loongarch/include/asm/hw_breakpoint.h @@ -38,8 +38,8 @@ struct arch_hw_breakpoint { * Limits. * Changing these will require modifications to the register accessors. */ -#define LOONGARCH_MAX_BRP 8 -#define LOONGARCH_MAX_WRP 8 +#define LOONGARCH_MAX_BRP 14 +#define LOONGARCH_MAX_WRP 14 /* Virtual debug register bases. */ #define CSR_CFG_ADDR 0 diff --git a/arch/loongarch/include/asm/loongarch.h b/arch/loongarch/include/asm/loongarch.h index 23232c7bdb9f..2c996da6a5bf 100644 --- a/arch/loongarch/include/asm/loongarch.h +++ b/arch/loongarch/include/asm/loongarch.h @@ -928,6 +928,36 @@ #define LOONGARCH_CSR_DB7CTRL 0x34a /* data breakpoint 7 control */ #define LOONGARCH_CSR_DB7ASID 0x34b /* data breakpoint 7 asid */ +#define LOONGARCH_CSR_DB8ADDR 0x350 /* data breakpoint 8 address */ +#define LOONGARCH_CSR_DB8MASK 0x351 /* data breakpoint 8 mask */ +#define LOONGARCH_CSR_DB8CTRL 0x352 /* data breakpoint 8 control */ +#define LOONGARCH_CSR_DB8ASID 0x353 /* data breakpoint 8 asid */ + +#define LOONGARCH_CSR_DB9ADDR 0x358 /* data breakpoint 9 address */ +#define LOONGARCH_CSR_DB9MASK 0x359 /* data breakpoint 9 mask */ +#define LOONGARCH_CSR_DB9CTRL 0x35a /* data breakpoint 9 control */ +#define LOONGARCH_CSR_DB9ASID 0x35b /* data breakpoint 9 asid */ + +#define LOONGARCH_CSR_DB10ADDR 0x360 /* data breakpoint 10 address */ +#define LOONGARCH_CSR_DB10MASK 0x361 /* data breakpoint 10 mask */ +#define LOONGARCH_CSR_DB10CTRL 0x362 /* data breakpoint 10 control */ +#define LOONGARCH_CSR_DB10ASID 0x363 /* data breakpoint 10 asid */ + +#define LOONGARCH_CSR_DB11ADDR 0x368 /* data breakpoint 11 address */ +#define LOONGARCH_CSR_DB11MASK 0x369 /* data breakpoint 11 mask */ +#define LOONGARCH_CSR_DB11CTRL 0x36a /* data breakpoint 11 control */ +#define LOONGARCH_CSR_DB11ASID 0x36b /* data breakpoint 11 asid */ + +#define LOONGARCH_CSR_DB12ADDR 0x370 /* data breakpoint 12 address */ +#define LOONGARCH_CSR_DB12MASK 0x371 /* data breakpoint 12 mask */ +#define LOONGARCH_CSR_DB12CTRL 0x372 /* data breakpoint 12 control */ +#define LOONGARCH_CSR_DB12ASID 0x373 /* data breakpoint 12 asid */ + +#define LOONGARCH_CSR_DB13ADDR 0x378 /* data breakpoint 13 address */ +#define LOONGARCH_CSR_DB13MASK 0x379 /* data breakpoint 13 mask */ +#define LOONGARCH_CSR_DB13CTRL 0x37a /* data breakpoint 13 control */ +#define LOONGARCH_CSR_DB13ASID 0x37b /* data breakpoint 13 asid */ + #define LOONGARCH_CSR_FWPC 0x380 /* instruction breakpoint config */ #define LOONGARCH_CSR_FWPS 0x381 /* instruction breakpoint status */ @@ -971,6 +1001,36 @@ #define LOONGARCH_CSR_IB7CTRL 0x3ca /* inst breakpoint 7 control */ #define LOONGARCH_CSR_IB7ASID 0x3cb /* inst breakpoint 7 asid */ +#define LOONGARCH_CSR_IB8ADDR 0x3d0 /* inst breakpoint 8 address */ +#define LOONGARCH_CSR_IB8MASK 0x3d1 /* inst breakpoint 8 mask */ +#define LOONGARCH_CSR_IB8CTRL 0x3d2 /* inst breakpoint 8 control */ +#define LOONGARCH_CSR_IB8ASID 0x3d3 /* inst breakpoint 8 asid */ + +#define LOONGARCH_CSR_IB9ADDR 0x3d8 /* inst breakpoint 9 address */ +#define LOONGARCH_CSR_IB9MASK 0x3d9 /* inst breakpoint 9 mask */ +#define LOONGARCH_CSR_IB9CTRL 0x3da /* inst breakpoint 9 control */ +#define LOONGARCH_CSR_IB9ASID 0x3db /* inst breakpoint 9 asid */ + +#define LOONGARCH_CSR_IB10ADDR 0x3e0 /* inst breakpoint 10 address */ +#define LOONGARCH_CSR_IB10MASK 0x3e1 /* inst breakpoint 10 mask */ +#define LOONGARCH_CSR_IB10CTRL 0x3e2 /* inst breakpoint 10 control */ +#define LOONGARCH_CSR_IB10ASID 0x3e3 /* inst breakpoint 10 asid */ + +#define LOONGARCH_CSR_IB11ADDR 0x3e8 /* inst breakpoint 11 address */ +#define LOONGARCH_CSR_IB11MASK 0x3e9 /* inst breakpoint 11 mask */ +#define LOONGARCH_CSR_IB11CTRL 0x3ea /* inst breakpoint 11 control */ +#define LOONGARCH_CSR_IB11ASID 0x3eb /* inst breakpoint 11 asid */ + +#define LOONGARCH_CSR_IB12ADDR 0x3f0 /* inst breakpoint 12 address */ +#define LOONGARCH_CSR_IB12MASK 0x3f1 /* inst breakpoint 12 mask */ +#define LOONGARCH_CSR_IB12CTRL 0x3f2 /* inst breakpoint 12 control */ +#define LOONGARCH_CSR_IB12ASID 0x3f3 /* inst breakpoint 12 asid */ + +#define LOONGARCH_CSR_IB13ADDR 0x3f8 /* inst breakpoint 13 address */ +#define LOONGARCH_CSR_IB13MASK 0x3f9 /* inst breakpoint 13 mask */ +#define LOONGARCH_CSR_IB13CTRL 0x3fa /* inst breakpoint 13 control */ +#define LOONGARCH_CSR_IB13ASID 0x3fb /* inst breakpoint 13 asid */ + #define LOONGARCH_CSR_DEBUG 0x500 /* debug config */ #define LOONGARCH_CSR_DERA 0x501 /* debug era */ #define LOONGARCH_CSR_DESAVE 0x502 /* debug save */ diff --git a/arch/loongarch/kernel/hw_breakpoint.c b/arch/loongarch/kernel/hw_breakpoint.c index a6e4b605bfa8..c35f9bf38033 100644 --- a/arch/loongarch/kernel/hw_breakpoint.c +++ b/arch/loongarch/kernel/hw_breakpoint.c @@ -51,7 +51,13 @@ int hw_breakpoint_slots(int type) READ_WB_REG_CASE(OFF, 4, REG, T, VAL); \ READ_WB_REG_CASE(OFF, 5, REG, T, VAL); \ READ_WB_REG_CASE(OFF, 6, REG, T, VAL); \ - READ_WB_REG_CASE(OFF, 7, REG, T, VAL); + READ_WB_REG_CASE(OFF, 7, REG, T, VAL); \ + READ_WB_REG_CASE(OFF, 8, REG, T, VAL); \ + READ_WB_REG_CASE(OFF, 9, REG, T, VAL); \ + READ_WB_REG_CASE(OFF, 10, REG, T, VAL); \ + READ_WB_REG_CASE(OFF, 11, REG, T, VAL); \ + READ_WB_REG_CASE(OFF, 12, REG, T, VAL); \ + READ_WB_REG_CASE(OFF, 13, REG, T, VAL); #define GEN_WRITE_WB_REG_CASES(OFF, REG, T, VAL) \ WRITE_WB_REG_CASE(OFF, 0, REG, T, VAL); \ @@ -61,7 +67,13 @@ int hw_breakpoint_slots(int type) WRITE_WB_REG_CASE(OFF, 4, REG, T, VAL); \ WRITE_WB_REG_CASE(OFF, 5, REG, T, VAL); \ WRITE_WB_REG_CASE(OFF, 6, REG, T, VAL); \ - WRITE_WB_REG_CASE(OFF, 7, REG, T, VAL); + WRITE_WB_REG_CASE(OFF, 7, REG, T, VAL); \ + WRITE_WB_REG_CASE(OFF, 8, REG, T, VAL); \ + WRITE_WB_REG_CASE(OFF, 9, REG, T, VAL); \ + WRITE_WB_REG_CASE(OFF, 10, REG, T, VAL); \ + WRITE_WB_REG_CASE(OFF, 11, REG, T, VAL); \ + WRITE_WB_REG_CASE(OFF, 12, REG, T, VAL); \ + WRITE_WB_REG_CASE(OFF, 13, REG, T, VAL); static u64 read_wb_reg(int reg, int n, int t) { diff --git a/arch/loongarch/power/platform.c b/arch/loongarch/power/platform.c index 3ea8e07aa225..6c7735cda4d8 100644 --- a/arch/loongarch/power/platform.c +++ b/arch/loongarch/power/platform.c @@ -17,7 +17,7 @@ void enable_gpe_wakeup(void) if (acpi_gbl_reduced_hardware) return; - acpi_enable_all_wakeup_gpes(); + acpi_hw_enable_all_wakeup_gpes(); } void enable_pci_wakeup(void) diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h index ea71f7245a63..8d8f4909ae1a 100644 --- a/arch/powerpc/include/asm/hugetlb.h +++ b/arch/powerpc/include/asm/hugetlb.h @@ -15,6 +15,15 @@ extern bool hugetlb_disabled; +static inline bool hugepages_supported(void) +{ + if (hugetlb_disabled) + return false; + + return HPAGE_SHIFT != 0; +} +#define hugepages_supported hugepages_supported + void __init hugetlbpage_init_defaultsize(void); int slice_is_hugepage_only_range(struct mm_struct *mm, unsigned long addr, diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 5826f5108a12..4e4870031265 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -1051,7 +1051,7 @@ static struct sched_domain_topology_level powerpc_topology[] = { #endif { shared_cache_mask, powerpc_shared_cache_flags, SD_INIT_NAME(CACHE) }, { cpu_mc_mask, SD_INIT_NAME(MC) }, - { cpu_cpu_mask, SD_INIT_NAME(DIE) }, + { cpu_cpu_mask, SD_INIT_NAME(PKG) }, { NULL, }, }; @@ -1595,7 +1595,7 @@ static void add_cpu_to_masks(int cpu) /* Skip all CPUs already part of current CPU core mask */ cpumask_andnot(mask, cpu_online_mask, cpu_core_mask(cpu)); - /* If chip_id is -1; limit the cpu_core_mask to within DIE*/ + /* If chip_id is -1; limit the cpu_core_mask to within PKG */ if (chip_id == -1) cpumask_and(mask, mask, cpu_cpu_mask(cpu)); diff --git a/arch/powerpc/sysdev/xive/native.c b/arch/powerpc/sysdev/xive/native.c index f1c0fa6ece21..9928b93dbc4d 100644 --- a/arch/powerpc/sysdev/xive/native.c +++ b/arch/powerpc/sysdev/xive/native.c @@ -559,9 +559,7 @@ bool __init xive_native_init(void) struct device_node *np; struct resource r; void __iomem *tima; - struct property *prop; u8 max_prio = 7; - const __be32 *p; u32 val, cpu; s64 rc; @@ -592,7 +590,7 @@ bool __init xive_native_init(void) max_prio = val - 1; /* Iterate the EQ sizes and pick one */ - of_property_for_each_u32(np, "ibm,xive-eq-sizes", prop, p, val) { + of_property_for_each_u32(np, "ibm,xive-eq-sizes", val) { xive_queue_shift = val; if (val == PAGE_SHIFT) break; diff --git a/arch/powerpc/sysdev/xive/spapr.c b/arch/powerpc/sysdev/xive/spapr.c index e45419264391..f2fa985a2c77 100644 --- a/arch/powerpc/sysdev/xive/spapr.c +++ b/arch/powerpc/sysdev/xive/spapr.c @@ -814,7 +814,6 @@ bool __init xive_spapr_init(void) struct device_node *np; struct resource r; void __iomem *tima; - struct property *prop; u8 max_prio; u32 val; u32 len; @@ -866,7 +865,7 @@ bool __init xive_spapr_init(void) } /* Iterate the EQ sizes and pick one */ - of_property_for_each_u32(np, "ibm,xive-eq-sizes", prop, reg, val) { + of_property_for_each_u32(np, "ibm,xive-eq-sizes", val) { xive_queue_shift = val; if (val == PAGE_SHIFT) break; diff --git a/arch/riscv/kernel/vector.c b/arch/riscv/kernel/vector.c index 8d92fb6c522c..81886fc36ed6 100644 --- a/arch/riscv/kernel/vector.c +++ b/arch/riscv/kernel/vector.c @@ -270,7 +270,7 @@ static int __init riscv_v_sysctl_init(void) static int __init riscv_v_sysctl_init(void) { return 0; } #endif /* ! CONFIG_SYSCTL */ -static int riscv_v_init(void) +static int __init riscv_v_init(void) { return riscv_v_sysctl_init(); } diff --git a/arch/s390/Makefile b/arch/s390/Makefile index 73873e451686..b77294ab0c58 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -21,7 +21,7 @@ KBUILD_AFLAGS_DECOMPRESSOR := $(CLANG_FLAGS) -m64 -D__ASSEMBLY__ ifndef CONFIG_AS_IS_LLVM KBUILD_AFLAGS_DECOMPRESSOR += $(if $(CONFIG_DEBUG_INFO),$(aflags_dwarf)) endif -KBUILD_CFLAGS_DECOMPRESSOR := $(CLANG_FLAGS) -m64 -O2 -mpacked-stack +KBUILD_CFLAGS_DECOMPRESSOR := $(CLANG_FLAGS) -m64 -O2 -mpacked-stack -std=gnu11 KBUILD_CFLAGS_DECOMPRESSOR += -DDISABLE_BRANCH_PROFILING -D__NO_FORTIFY KBUILD_CFLAGS_DECOMPRESSOR += -fno-delete-null-pointer-checks -msoft-float -mbackchain KBUILD_CFLAGS_DECOMPRESSOR += -fno-asynchronous-unwind-tables diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c index 5466e7bada03..65a66df5bb86 100644 --- a/arch/s390/kernel/perf_cpum_cf.c +++ b/arch/s390/kernel/perf_cpum_cf.c @@ -977,7 +977,7 @@ static int cfdiag_push_sample(struct perf_event *event, if (event->attr.sample_type & PERF_SAMPLE_RAW) { raw.frag.size = cpuhw->usedss; raw.frag.data = cpuhw->stop; - perf_sample_save_raw_data(&data, &raw); + perf_sample_save_raw_data(&data, event, &raw); } overflow = perf_event_overflow(event, &data, ®s); diff --git a/arch/s390/kernel/perf_pai_crypto.c b/arch/s390/kernel/perf_pai_crypto.c index 4a4e914c283c..044fba8332b2 100644 --- a/arch/s390/kernel/perf_pai_crypto.c +++ b/arch/s390/kernel/perf_pai_crypto.c @@ -365,7 +365,7 @@ static int paicrypt_push_sample(void) if (event->attr.sample_type & PERF_SAMPLE_RAW) { raw.frag.size = rawsize; raw.frag.data = cpump->save; - perf_sample_save_raw_data(&data, &raw); + perf_sample_save_raw_data(&data, event, &raw); } overflow = perf_event_overflow(event, &data, ®s); diff --git a/arch/s390/kernel/perf_pai_ext.c b/arch/s390/kernel/perf_pai_ext.c index b5febe22d054..089bd3104b39 100644 --- a/arch/s390/kernel/perf_pai_ext.c +++ b/arch/s390/kernel/perf_pai_ext.c @@ -454,7 +454,7 @@ static int paiext_push_sample(void) if (event->attr.sample_type & PERF_SAMPLE_RAW) { raw.frag.size = rawsize; raw.frag.data = cpump->save; - perf_sample_save_raw_data(&data, &raw); + perf_sample_save_raw_data(&data, event, &raw); } overflow = perf_event_overflow(event, &data, ®s); diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index 68adf1de8888..66bda6a8f918 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -522,7 +522,7 @@ static struct sched_domain_topology_level s390_topology[] = { { cpu_coregroup_mask, cpu_core_flags, SD_INIT_NAME(MC) }, { cpu_book_mask, SD_INIT_NAME(BOOK) }, { cpu_drawer_mask, SD_INIT_NAME(DRAWER) }, - { cpu_cpu_mask, SD_INIT_NAME(DIE) }, + { cpu_cpu_mask, SD_INIT_NAME(PKG) }, { NULL, }, }; diff --git a/arch/s390/purgatory/Makefile b/arch/s390/purgatory/Makefile index 4e930f566878..fe7e71f91711 100644 --- a/arch/s390/purgatory/Makefile +++ b/arch/s390/purgatory/Makefile @@ -21,7 +21,7 @@ UBSAN_SANITIZE := n KASAN_SANITIZE := n KCSAN_SANITIZE := n -KBUILD_CFLAGS := -fno-strict-aliasing -Wall -Wstrict-prototypes +KBUILD_CFLAGS := -std=gnu11 -fno-strict-aliasing -Wall -Wstrict-prototypes KBUILD_CFLAGS += -Wno-pointer-sign -Wno-sign-compare KBUILD_CFLAGS += -fno-zero-initialized-in-bss -fno-builtin -ffreestanding KBUILD_CFLAGS += -Os -m64 -msoft-float -fno-common diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c index 6911c5399d02..f483874fa20f 100644 --- a/arch/x86/events/amd/ibs.c +++ b/arch/x86/events/amd/ibs.c @@ -1115,7 +1115,7 @@ fail: .data = ibs_data.data, }, }; - perf_sample_save_raw_data(&data, &raw); + perf_sample_save_raw_data(&data, event, &raw); } if (perf_ibs == &perf_ibs_op) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index ce77dac9a020..a8f2ab816d5a 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -604,14 +604,6 @@ static int x86_cluster_flags(void) } #endif -static int x86_die_flags(void) -{ - if (cpu_feature_enabled(X86_FEATURE_HYBRID_CPU)) - return x86_sched_itmt_flags(); - - return 0; -} - /* * Set if a package/die has multiple NUMA nodes inside. * AMD Magny-Cours, Intel Cluster-on-Die, and Intel @@ -641,13 +633,13 @@ static void __init build_sched_topology(void) }; #endif /* - * When there is NUMA topology inside the package skip the DIE domain + * When there is NUMA topology inside the package skip the PKG domain * since the NUMA domains will auto-magically create the right spanning * domains based on the SLIT. */ if (!x86_has_numa_in_package) { x86_topology[i++] = (struct sched_domain_topology_level){ - cpu_cpu_mask, x86_die_flags, SD_INIT_NAME(DIE) + cpu_cpu_mask, x86_sched_itmt_flags, SD_INIT_NAME(PKG) }; } |