diff options
Diffstat (limited to 'drivers/cpufreq')
| -rw-r--r-- | drivers/cpufreq/acpi-cpufreq.c | 36 | ||||
| -rw-r--r-- | drivers/cpufreq/cppc_cpufreq.c | 2 | ||||
| -rw-r--r-- | drivers/cpufreq/cpufreq.c | 8 | ||||
| -rw-r--r-- | drivers/cpufreq/cpufreq_governor.c | 45 | ||||
| -rw-r--r-- | drivers/cpufreq/s3c64xx-cpufreq.c | 11 | ||||
| -rw-r--r-- | drivers/cpufreq/scmi-cpufreq.c | 10 | ||||
| -rw-r--r-- | drivers/cpufreq/scpi-cpufreq.c | 18 |
7 files changed, 87 insertions, 43 deletions
diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 28467d83c745..4a31bd90406c 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -630,7 +630,14 @@ static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c) #endif #ifdef CONFIG_ACPI_CPPC_LIB -static u64 get_max_boost_ratio(unsigned int cpu) +/* + * get_max_boost_ratio: Computes the max_boost_ratio as the ratio + * between the highest_perf and the nominal_perf. + * + * Returns the max_boost_ratio for @cpu. Returns the CPPC nominal + * frequency via @nominal_freq if it is non-NULL pointer. + */ +static u64 get_max_boost_ratio(unsigned int cpu, u64 *nominal_freq) { struct cppc_perf_caps perf_caps; u64 highest_perf, nominal_perf; @@ -653,6 +660,9 @@ static u64 get_max_boost_ratio(unsigned int cpu) nominal_perf = perf_caps.nominal_perf; + if (nominal_freq) + *nominal_freq = perf_caps.nominal_freq; + if (!highest_perf || !nominal_perf) { pr_debug("CPU%d: highest or nominal performance missing\n", cpu); return 0; @@ -665,8 +675,12 @@ static u64 get_max_boost_ratio(unsigned int cpu) return div_u64(highest_perf << SCHED_CAPACITY_SHIFT, nominal_perf); } + #else -static inline u64 get_max_boost_ratio(unsigned int cpu) { return 0; } +static inline u64 get_max_boost_ratio(unsigned int cpu, u64 *nominal_freq) +{ + return 0; +} #endif static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) @@ -676,9 +690,9 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) struct acpi_cpufreq_data *data; unsigned int cpu = policy->cpu; struct cpuinfo_x86 *c = &cpu_data(cpu); + u64 max_boost_ratio, nominal_freq = 0; unsigned int valid_states = 0; unsigned int result = 0; - u64 max_boost_ratio; unsigned int i; #ifdef CONFIG_SMP static int blacklisted; @@ -828,16 +842,20 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) } freq_table[valid_states].frequency = CPUFREQ_TABLE_END; - max_boost_ratio = get_max_boost_ratio(cpu); + max_boost_ratio = get_max_boost_ratio(cpu, &nominal_freq); if (max_boost_ratio) { - unsigned int freq = freq_table[0].frequency; + unsigned int freq = nominal_freq; /* - * Because the loop above sorts the freq_table entries in the - * descending order, freq is the maximum frequency in the table. - * Assume that it corresponds to the CPPC nominal frequency and - * use it to set cpuinfo.max_freq. + * The loop above sorts the freq_table entries in the + * descending order. If ACPI CPPC has not advertised + * the nominal frequency (this is possible in CPPC + * revisions prior to 3), then use the first entry in + * the pstate table as a proxy for nominal frequency. */ + if (!freq) + freq = freq_table[0].frequency; + policy->cpuinfo.max_freq = freq * max_boost_ratio >> SCHED_CAPACITY_SHIFT; } else { /* diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c index 17cfa2b92eee..c5a4aa0c2c9a 100644 --- a/drivers/cpufreq/cppc_cpufreq.c +++ b/drivers/cpufreq/cppc_cpufreq.c @@ -620,7 +620,7 @@ static unsigned int cppc_cpufreq_get_rate(unsigned int cpu) int ret; if (!policy) - return -ENODEV; + return 0; cpu_data = policy->driver_data; diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index a7bbe6f28b54..2c98ddf2c8db 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -2654,10 +2654,18 @@ EXPORT_SYMBOL(cpufreq_update_policy); */ void cpufreq_update_limits(unsigned int cpu) { + struct cpufreq_policy *policy; + + policy = cpufreq_cpu_get(cpu); + if (!policy) + return; + if (cpufreq_driver->update_limits) cpufreq_driver->update_limits(cpu); else cpufreq_update_policy(cpu); + + cpufreq_cpu_put(policy); } EXPORT_SYMBOL_GPL(cpufreq_update_limits); diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c index 55c80319d268..5981e3ef9ce0 100644 --- a/drivers/cpufreq/cpufreq_governor.c +++ b/drivers/cpufreq/cpufreq_governor.c @@ -145,7 +145,23 @@ unsigned int dbs_update(struct cpufreq_policy *policy) time_elapsed = update_time - j_cdbs->prev_update_time; j_cdbs->prev_update_time = update_time; - idle_time = cur_idle_time - j_cdbs->prev_cpu_idle; + /* + * cur_idle_time could be smaller than j_cdbs->prev_cpu_idle if + * it's obtained from get_cpu_idle_time_jiffy() when NOHZ is + * off, where idle_time is calculated by the difference between + * time elapsed in jiffies and "busy time" obtained from CPU + * statistics. If a CPU is 100% busy, the time elapsed and busy + * time should grow with the same amount in two consecutive + * samples, but in practice there could be a tiny difference, + * making the accumulated idle time decrease sometimes. Hence, + * in this case, idle_time should be regarded as 0 in order to + * make the further process correct. + */ + if (cur_idle_time > j_cdbs->prev_cpu_idle) + idle_time = cur_idle_time - j_cdbs->prev_cpu_idle; + else + idle_time = 0; + j_cdbs->prev_cpu_idle = cur_idle_time; if (ignore_nice) { @@ -162,7 +178,7 @@ unsigned int dbs_update(struct cpufreq_policy *policy) * calls, so the previous load value can be used then. */ load = j_cdbs->prev_load; - } else if (unlikely((int)idle_time > 2 * sampling_rate && + } else if (unlikely(idle_time > 2 * sampling_rate && j_cdbs->prev_load)) { /* * If the CPU had gone completely idle and a task has @@ -189,30 +205,15 @@ unsigned int dbs_update(struct cpufreq_policy *policy) load = j_cdbs->prev_load; j_cdbs->prev_load = 0; } else { - if (time_elapsed >= idle_time) { + if (time_elapsed > idle_time) load = 100 * (time_elapsed - idle_time) / time_elapsed; - } else { - /* - * That can happen if idle_time is returned by - * get_cpu_idle_time_jiffy(). In that case - * idle_time is roughly equal to the difference - * between time_elapsed and "busy time" obtained - * from CPU statistics. Then, the "busy time" - * can end up being greater than time_elapsed - * (for example, if jiffies_64 and the CPU - * statistics are updated by different CPUs), - * so idle_time may in fact be negative. That - * means, though, that the CPU was busy all - * the time (on the rough average) during the - * last sampling interval and 100 can be - * returned as the load. - */ - load = (int)idle_time < 0 ? 100 : 0; - } + else + load = 0; + j_cdbs->prev_load = load; } - if (unlikely((int)idle_time > 2 * sampling_rate)) { + if (unlikely(idle_time > 2 * sampling_rate)) { unsigned int periods = idle_time / sampling_rate; if (periods < idle_periods) diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c index c6bdfc308e99..9cef71528076 100644 --- a/drivers/cpufreq/s3c64xx-cpufreq.c +++ b/drivers/cpufreq/s3c64xx-cpufreq.c @@ -24,6 +24,7 @@ struct s3c64xx_dvfs { unsigned int vddarm_max; }; +#ifdef CONFIG_REGULATOR static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = { [0] = { 1000000, 1150000 }, [1] = { 1050000, 1150000 }, @@ -31,6 +32,7 @@ static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = { [3] = { 1200000, 1350000 }, [4] = { 1300000, 1350000 }, }; +#endif static struct cpufreq_frequency_table s3c64xx_freq_table[] = { { 0, 0, 66000 }, @@ -51,15 +53,16 @@ static struct cpufreq_frequency_table s3c64xx_freq_table[] = { static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, unsigned int index) { - struct s3c64xx_dvfs *dvfs; - unsigned int old_freq, new_freq; + unsigned int new_freq = s3c64xx_freq_table[index].frequency; int ret; +#ifdef CONFIG_REGULATOR + struct s3c64xx_dvfs *dvfs; + unsigned int old_freq; + old_freq = clk_get_rate(policy->clk) / 1000; - new_freq = s3c64xx_freq_table[index].frequency; dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[index].driver_data]; -#ifdef CONFIG_REGULATOR if (vddarm && new_freq > old_freq) { ret = regulator_set_voltage(vddarm, dvfs->vddarm_min, diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c index eb3f1952f986..8c9c2f710790 100644 --- a/drivers/cpufreq/scmi-cpufreq.c +++ b/drivers/cpufreq/scmi-cpufreq.c @@ -32,11 +32,17 @@ static const struct scmi_perf_proto_ops *perf_ops; static unsigned int scmi_cpufreq_get_rate(unsigned int cpu) { - struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu); - struct scmi_data *priv = policy->driver_data; + struct cpufreq_policy *policy; + struct scmi_data *priv; unsigned long rate; int ret; + policy = cpufreq_cpu_get_raw(cpu); + if (unlikely(!policy)) + return 0; + + priv = policy->driver_data; + ret = perf_ops->freq_get(ph, priv->domain_id, &rate, false); if (ret) return 0; diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c index 763692e327b1..f111f1f3bf38 100644 --- a/drivers/cpufreq/scpi-cpufreq.c +++ b/drivers/cpufreq/scpi-cpufreq.c @@ -37,9 +37,16 @@ static struct scpi_ops *scpi_ops; static unsigned int scpi_cpufreq_get_rate(unsigned int cpu) { - struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu); - struct scpi_data *priv = policy->driver_data; - unsigned long rate = clk_get_rate(priv->clk); + struct cpufreq_policy *policy; + struct scpi_data *priv; + unsigned long rate; + + policy = cpufreq_cpu_get_raw(cpu); + if (unlikely(!policy)) + return 0; + + priv = policy->driver_data; + rate = clk_get_rate(priv->clk); return rate / 1000; } @@ -47,8 +54,9 @@ static unsigned int scpi_cpufreq_get_rate(unsigned int cpu) static int scpi_cpufreq_set_target(struct cpufreq_policy *policy, unsigned int index) { - u64 rate = policy->freq_table[index].frequency * 1000; + unsigned long freq_khz = policy->freq_table[index].frequency; struct scpi_data *priv = policy->driver_data; + unsigned long rate = freq_khz * 1000; int ret; ret = clk_set_rate(priv->clk, rate); @@ -56,7 +64,7 @@ scpi_cpufreq_set_target(struct cpufreq_policy *policy, unsigned int index) if (ret) return ret; - if (clk_get_rate(priv->clk) != rate) + if (clk_get_rate(priv->clk) / 1000 != freq_khz) return -EIO; return 0; |