diff options
Diffstat (limited to 'drivers/cxl')
| -rw-r--r-- | drivers/cxl/cxl.h | 2 | ||||
| -rw-r--r-- | drivers/cxl/mem.c | 223 |
2 files changed, 218 insertions, 7 deletions
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h index 8fd4a177fe25..6f14838c2d25 100644 --- a/drivers/cxl/cxl.h +++ b/drivers/cxl/cxl.h @@ -69,6 +69,7 @@ struct cxl_memdev; * (CXL 2.0 8.2.8.4.3 Mailbox Capabilities Register) * @mbox_mutex: Mutex to synchronize mailbox access. * @firmware_version: Firmware version for the memory device. + * @enabled_commands: Hardware commands found enabled in CEL. * @pmem_range: Persistent memory capacity information. * @ram_range: Volatile memory capacity information. */ @@ -84,6 +85,7 @@ struct cxl_mem { size_t payload_size; struct mutex mbox_mutex; /* Protects device mailbox and firmware */ char firmware_version[0x10]; + unsigned long *enabled_cmds; struct range pmem_range; struct range ram_range; diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c index 5319412e245c..e31b3045e231 100644 --- a/drivers/cxl/mem.c +++ b/drivers/cxl/mem.c @@ -46,6 +46,8 @@ enum opcode { CXL_MBOX_OP_INVALID = 0x0000, CXL_MBOX_OP_RAW = CXL_MBOX_OP_INVALID, CXL_MBOX_OP_ACTIVATE_FW = 0x0202, + CXL_MBOX_OP_GET_SUPPORTED_LOGS = 0x0400, + CXL_MBOX_OP_GET_LOG = 0x0401, CXL_MBOX_OP_IDENTIFY = 0x4000, CXL_MBOX_OP_SET_PARTITION_INFO = 0x4101, CXL_MBOX_OP_SET_LSA = 0x4103, @@ -108,10 +110,28 @@ static DEFINE_IDA(cxl_memdev_ida); static struct dentry *cxl_debugfs; static bool cxl_raw_allow_all; +enum { + CEL_UUID, + VENDOR_DEBUG_UUID, +}; + +/* See CXL 2.0 Table 170. Get Log Input Payload */ +static const uuid_t log_uuid[] = { + [CEL_UUID] = UUID_INIT(0xda9c0b5, 0xbf41, 0x4b78, 0x8f, 0x79, 0x96, + 0xb1, 0x62, 0x3b, 0x3f, 0x17), + [VENDOR_DEBUG_UUID] = UUID_INIT(0xe1819d9, 0x11a9, 0x400c, 0x81, 0x1f, + 0xd6, 0x07, 0x19, 0x40, 0x3d, 0x86), +}; + /** * struct cxl_mem_command - Driver representation of a memory device command * @info: Command information as it exists for the UAPI * @opcode: The actual bits used for the mailbox protocol + * @flags: Set of flags effecting driver behavior. + * + * * %CXL_CMD_FLAG_FORCE_ENABLE: In cases of error, commands with this flag + * will be enabled by the driver regardless of what hardware may have + * advertised. * * The cxl_mem_command is the driver's internal representation of commands that * are supported by the driver. Some of these commands may not be supported by @@ -123,9 +143,12 @@ static bool cxl_raw_allow_all; struct cxl_mem_command { struct cxl_command_info info; enum opcode opcode; + u32 flags; +#define CXL_CMD_FLAG_NONE 0 +#define CXL_CMD_FLAG_FORCE_ENABLE BIT(0) }; -#define CXL_CMD(_id, sin, sout) \ +#define CXL_CMD(_id, sin, sout, _flags) \ [CXL_MEM_COMMAND_ID_##_id] = { \ .info = { \ .id = CXL_MEM_COMMAND_ID_##_id, \ @@ -133,6 +156,7 @@ struct cxl_mem_command { .size_out = sout, \ }, \ .opcode = CXL_MBOX_OP_##_id, \ + .flags = _flags, \ } /* @@ -142,10 +166,11 @@ struct cxl_mem_command { * 0, and the user passed in 1, it is an error. */ static struct cxl_mem_command mem_commands[] = { - CXL_CMD(IDENTIFY, 0, 0x43), + CXL_CMD(IDENTIFY, 0, 0x43, CXL_CMD_FLAG_FORCE_ENABLE), #ifdef CONFIG_CXL_MEM_RAW_COMMANDS - CXL_CMD(RAW, ~0, ~0), + CXL_CMD(RAW, ~0, ~0, 0), #endif + CXL_CMD(GET_SUPPORTED_LOGS, 0, ~0, CXL_CMD_FLAG_FORCE_ENABLE), }; /* @@ -633,6 +658,10 @@ static int cxl_validate_cmd_from_user(struct cxl_mem *cxlm, c = &mem_commands[send_cmd->id]; info = &c->info; + /* Check that the command is enabled for hardware */ + if (!test_bit(info->id, cxlm->enabled_cmds)) + return -ENOTTY; + /* Check the input buffer is the expected size */ if (info->size_in >= 0 && info->size_in != send_cmd->in.size) return -ENOMEM; @@ -757,6 +786,17 @@ static const struct file_operations cxl_memdev_fops = { .llseek = noop_llseek, }; +static inline struct cxl_mem_command *cxl_mem_find_command(u16 opcode) +{ + struct cxl_mem_command *c; + + cxl_for_each_cmd(c) + if (c->opcode == opcode) + return c; + + return NULL; +} + /** * cxl_mem_mbox_send_cmd() - Send a mailbox command to a memory device. * @cxlm: The CXL memory device to communicate with. @@ -777,9 +817,7 @@ static const struct file_operations cxl_memdev_fops = { * * Mailbox commands may execute successfully yet the device itself reported an * error. While this distinction can be useful for commands from userspace, the - * kernel will only be able to use results when both are successful. It's - * expected that all callers of this function know exactly the size of the data - * they will consume from the hardware. + * kernel will only be able to use results when both are successful. * * See __cxl_mem_mbox_send_cmd() */ @@ -787,6 +825,7 @@ static int cxl_mem_mbox_send_cmd(struct cxl_mem *cxlm, u16 opcode, void *in, size_t in_size, void *out, size_t out_size) { + const struct cxl_mem_command *cmd = cxl_mem_find_command(opcode); struct mbox_cmd mbox_cmd = { .opcode = opcode, .payload_in = in, @@ -812,7 +851,11 @@ static int cxl_mem_mbox_send_cmd(struct cxl_mem *cxlm, u16 opcode, if (mbox_cmd.return_code != CXL_MBOX_SUCCESS) return -ENXIO; - if (mbox_cmd.size_out != out_size) + /* + * Variable sized commands can't be validated and so it's up to the + * caller to do that if they wish. + */ + if (cmd->info.size_out >= 0 && mbox_cmd.size_out != out_size) return -EIO; return 0; @@ -947,6 +990,14 @@ static struct cxl_mem *cxl_mem_create(struct pci_dev *pdev, u32 reg_lo, mutex_init(&cxlm->mbox_mutex); cxlm->pdev = pdev; cxlm->regs = regs + offset; + cxlm->enabled_cmds = + devm_kmalloc_array(dev, BITS_TO_LONGS(cxl_cmd_count), + sizeof(unsigned long), + GFP_KERNEL | __GFP_ZERO); + if (!cxlm->enabled_cmds) { + dev_err(dev, "No memory available for bitmap\n"); + return NULL; + } dev_dbg(dev, "Mapped CXL Memory Device resource\n"); return cxlm; @@ -1166,6 +1217,160 @@ err_ref: return rc; } +static int cxl_xfer_log(struct cxl_mem *cxlm, uuid_t *uuid, u32 size, u8 *out) +{ + u32 remaining = size; + u32 offset = 0; + + while (remaining) { + u32 xfer_size = min_t(u32, remaining, cxlm->payload_size); + struct cxl_mbox_get_log { + uuid_t uuid; + __le32 offset; + __le32 length; + } __packed log = { + .uuid = *uuid, + .offset = cpu_to_le32(offset), + .length = cpu_to_le32(xfer_size) + }; + int rc; + + rc = cxl_mem_mbox_send_cmd(cxlm, CXL_MBOX_OP_GET_LOG, &log, + sizeof(log), out, xfer_size); + if (rc < 0) + return rc; + + out += xfer_size; + remaining -= xfer_size; + offset += xfer_size; + } + + return 0; +} + +/** + * cxl_walk_cel() - Walk through the Command Effects Log. + * @cxlm: Device. + * @size: Length of the Command Effects Log. + * @cel: CEL + * + * Iterate over each entry in the CEL and determine if the driver supports the + * command. If so, the command is enabled for the device and can be used later. + */ +static void cxl_walk_cel(struct cxl_mem *cxlm, size_t size, u8 *cel) +{ + struct cel_entry { + __le16 opcode; + __le16 effect; + } __packed * cel_entry; + const int cel_entries = size / sizeof(*cel_entry); + int i; + + cel_entry = (struct cel_entry *)cel; + + for (i = 0; i < cel_entries; i++) { + u16 opcode = le16_to_cpu(cel_entry[i].opcode); + struct cxl_mem_command *cmd = cxl_mem_find_command(opcode); + + if (!cmd) { + dev_dbg(&cxlm->pdev->dev, + "Opcode 0x%04x unsupported by driver", opcode); + continue; + } + + set_bit(cmd->info.id, cxlm->enabled_cmds); + } +} + +struct cxl_mbox_get_supported_logs { + __le16 entries; + u8 rsvd[6]; + struct gsl_entry { + uuid_t uuid; + __le32 size; + } __packed entry[]; +} __packed; + +static struct cxl_mbox_get_supported_logs *cxl_get_gsl(struct cxl_mem *cxlm) +{ + struct cxl_mbox_get_supported_logs *ret; + int rc; + + ret = kvmalloc(cxlm->payload_size, GFP_KERNEL); + if (!ret) + return ERR_PTR(-ENOMEM); + + rc = cxl_mem_mbox_send_cmd(cxlm, CXL_MBOX_OP_GET_SUPPORTED_LOGS, NULL, + 0, ret, cxlm->payload_size); + if (rc < 0) { + kvfree(ret); + return ERR_PTR(rc); + } + + return ret; +} + +/** + * cxl_mem_enumerate_cmds() - Enumerate commands for a device. + * @cxlm: The device. + * + * Returns 0 if enumerate completed successfully. + * + * CXL devices have optional support for certain commands. This function will + * determine the set of supported commands for the hardware and update the + * enabled_cmds bitmap in the @cxlm. + */ +static int cxl_mem_enumerate_cmds(struct cxl_mem *cxlm) +{ + struct cxl_mbox_get_supported_logs *gsl; + struct device *dev = &cxlm->pdev->dev; + struct cxl_mem_command *cmd; + int i, rc; + + gsl = cxl_get_gsl(cxlm); + if (IS_ERR(gsl)) + return PTR_ERR(gsl); + + rc = -ENOENT; + for (i = 0; i < le16_to_cpu(gsl->entries); i++) { + u32 size = le32_to_cpu(gsl->entry[i].size); + uuid_t uuid = gsl->entry[i].uuid; + u8 *log; + + dev_dbg(dev, "Found LOG type %pU of size %d", &uuid, size); + + if (!uuid_equal(&uuid, &log_uuid[CEL_UUID])) + continue; + + log = kvmalloc(size, GFP_KERNEL); + if (!log) { + rc = -ENOMEM; + goto out; + } + + rc = cxl_xfer_log(cxlm, &uuid, size, log); + if (rc) { + kvfree(log); + goto out; + } + + cxl_walk_cel(cxlm, size, log); + kvfree(log); + + /* In case CEL was bogus, enable some default commands. */ + cxl_for_each_cmd(cmd) + if (cmd->flags & CXL_CMD_FLAG_FORCE_ENABLE) + set_bit(cmd->info.id, cxlm->enabled_cmds); + + /* Found the required CEL */ + rc = 0; + } + +out: + kvfree(gsl); + return rc; +} + /** * cxl_mem_identify() - Send the IDENTIFY command to the device. * @cxlm: The device to identify. @@ -1266,6 +1471,10 @@ static int cxl_mem_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (rc) return rc; + rc = cxl_mem_enumerate_cmds(cxlm); + if (rc) + return rc; + rc = cxl_mem_identify(cxlm); if (rc) return rc; |