diff options
Diffstat (limited to 'drivers/input/touchscreen/goodix.c')
| -rw-r--r-- | drivers/input/touchscreen/goodix.c | 28 |
1 files changed, 2 insertions, 26 deletions
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 252dcae039f8..f8798d11ec03 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -796,17 +796,6 @@ int goodix_reset_no_int_sync(struct goodix_ts_data *ts) usleep_range(6000, 10000); /* T4: > 5ms */ - /* - * Put the reset pin back in to input / high-impedance mode to save - * power. Only do this in the non ACPI case since some ACPI boards - * don't have a pull-up, so there the reset pin must stay active-high. - */ - if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) { - error = gpiod_direction_input(ts->gpiod_rst); - if (error) - goto error; - } - return 0; error: @@ -957,14 +946,6 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) return -EINVAL; } - /* - * Normally we put the reset pin in input / high-impedance mode to save - * power. But some x86/ACPI boards don't have a pull-up, so for the ACPI - * case, leave the pin as is. This results in the pin not being touched - * at all on x86/ACPI boards, except when needed for error-recover. - */ - ts->gpiod_rst_flags = GPIOD_ASIS; - return devm_acpi_dev_add_driver_gpios(dev, gpio_mapping); } #else @@ -989,12 +970,6 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) return -EINVAL; dev = &ts->client->dev; - /* - * By default we request the reset pin as input, leaving it in - * high-impedance when not resetting the controller to save power. - */ - ts->gpiod_rst_flags = GPIOD_IN; - ts->avdd28 = devm_regulator_get(dev, "AVDD28"); if (IS_ERR(ts->avdd28)) return dev_err_probe(dev, PTR_ERR(ts->avdd28), "Failed to get AVDD28 regulator\n"); @@ -1019,7 +994,7 @@ retry_get_irq_gpio: ts->gpiod_int = gpiod; /* Get the reset line GPIO pin number */ - gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, ts->gpiod_rst_flags); + gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, GPIOD_ASIS); if (IS_ERR(gpiod)) return dev_err_probe(dev, PTR_ERR(gpiod), "Failed to get %s GPIO\n", GOODIX_GPIO_RST_NAME); @@ -1557,6 +1532,7 @@ MODULE_DEVICE_TABLE(i2c, goodix_ts_id); static const struct acpi_device_id goodix_acpi_match[] = { { "GDIX1001", 0 }, { "GDIX1002", 0 }, + { "GDIX1003", 0 }, { "GDX9110", 0 }, { } }; |