diff options
Diffstat (limited to 'drivers/mfd')
| -rw-r--r-- | drivers/mfd/Kconfig | 39 | ||||
| -rw-r--r-- | drivers/mfd/Makefile | 3 | ||||
| -rw-r--r-- | drivers/mfd/max7360.c | 171 | ||||
| -rw-r--r-- | drivers/mfd/nct6694.c | 388 | ||||
| -rw-r--r-- | drivers/mfd/stmpe-i2c.c | 1 | ||||
| -rw-r--r-- | drivers/mfd/stmpe-spi.c | 1 | ||||
| -rw-r--r-- | drivers/mfd/stmpe.c | 6 | ||||
| -rw-r--r-- | drivers/mfd/vexpress-sysreg.c | 25 |
8 files changed, 624 insertions, 10 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 425c5fba6cb1..4d21dbf73a34 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1134,6 +1134,21 @@ config MFD_MENF21BMC This driver can also be built as a module. If so the module will be called menf21bmc. +config MFD_NCT6694 + tristate "Nuvoton NCT6694 support" + select MFD_CORE + depends on USB + help + This enables support for the Nuvoton USB device NCT6694, which shares + peripherals. + The Nuvoton NCT6694 is a peripheral expander with 16 GPIO chips, + 6 I2C controllers, 2 CANfd controllers, 2 Watchdog timers, ADC, + PWM, and RTC. + This driver provides core APIs to access the NCT6694 hardware + monitoring and control features. + Additional drivers must be enabled to utilize the specific + functionalities of the device. + config MFD_OCELOT tristate "Microsemi Ocelot External Control Support" depends on SPI_MASTER @@ -1539,8 +1554,8 @@ config MFD_DB8500_PRCMU through a register map. config MFD_STMPE - bool "STMicroelectronics STMPE" - depends on I2C=y || SPI_MASTER=y + tristate "STMicroelectronics STMPE" + depends on I2C || SPI_MASTER depends on OF select MFD_CORE help @@ -1568,14 +1583,14 @@ menu "STMicroelectronics STMPE Interface Drivers" depends on MFD_STMPE config STMPE_I2C - bool "STMicroelectronics STMPE I2C Interface" - depends on I2C=y + tristate "STMicroelectronics STMPE I2C Interface" + depends on I2C default y help This is used to enable I2C interface of STMPE config STMPE_SPI - bool "STMicroelectronics STMPE SPI Interface" + tristate "STMicroelectronics STMPE SPI Interface" depends on SPI_MASTER help This is used to enable SPI interface of STMPE @@ -2481,5 +2496,19 @@ config MFD_UPBOARD_FPGA To compile this driver as a module, choose M here: the module will be called upboard-fpga. +config MFD_MAX7360 + tristate "Maxim MAX7360 I2C IO Expander" + depends on I2C + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + Say yes here to add support for Maxim MAX7360 device, embedding + keypad, rotary encoder, PWM and GPIO features. + + This driver provides common support for accessing the device; + additional drivers must be enabled in order to use the functionality + of the device. + endmenu endif diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index f7bdedd5a66d..3dd7a43c44c0 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -121,6 +121,8 @@ obj-$(CONFIG_MFD_MC13XXX) += mc13xxx-core.o obj-$(CONFIG_MFD_MC13XXX_SPI) += mc13xxx-spi.o obj-$(CONFIG_MFD_MC13XXX_I2C) += mc13xxx-i2c.o +obj-$(CONFIG_MFD_NCT6694) += nct6694.o + obj-$(CONFIG_MFD_CORE) += mfd-core.o ocelot-soc-objs := ocelot-core.o ocelot-spi.o @@ -163,6 +165,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o obj-$(CONFIG_MFD_DA9150) += da9150-core.o obj-$(CONFIG_MFD_MAX14577) += max14577.o +obj-$(CONFIG_MFD_MAX7360) += max7360.o obj-$(CONFIG_MFD_MAX77541) += max77541.o obj-$(CONFIG_MFD_MAX77620) += max77620.o obj-$(CONFIG_MFD_MAX77650) += max77650.o diff --git a/drivers/mfd/max7360.c b/drivers/mfd/max7360.c new file mode 100644 index 000000000000..5ee459c490ec --- /dev/null +++ b/drivers/mfd/max7360.c @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Maxim MAX7360 Core Driver + * + * Copyright 2025 Bootlin + * + * Authors: + * Kamel Bouhara <kamel.bouhara@bootlin.com> + * Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com> + */ + +#include <linux/array_size.h> +#include <linux/bits.h> +#include <linux/delay.h> +#include <linux/device/devres.h> +#include <linux/dev_printk.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/mfd/core.h> +#include <linux/mfd/max7360.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/types.h> + +static const struct mfd_cell max7360_cells[] = { + { .name = "max7360-pinctrl" }, + { .name = "max7360-pwm" }, + { .name = "max7360-keypad" }, + { .name = "max7360-rotary" }, + { + .name = "max7360-gpo", + .of_compatible = "maxim,max7360-gpo", + }, + { + .name = "max7360-gpio", + .of_compatible = "maxim,max7360-gpio", + }, +}; + +static const struct regmap_range max7360_volatile_ranges[] = { + regmap_reg_range(MAX7360_REG_KEYFIFO, MAX7360_REG_KEYFIFO), + regmap_reg_range(MAX7360_REG_I2C_TIMEOUT, MAX7360_REG_RTR_CNT), +}; + +static const struct regmap_access_table max7360_volatile_table = { + .yes_ranges = max7360_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(max7360_volatile_ranges), +}; + +static const struct regmap_config max7360_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = MAX7360_REG_PWMCFG(MAX7360_PORT_PWM_COUNT - 1), + .volatile_table = &max7360_volatile_table, + .cache_type = REGCACHE_MAPLE, +}; + +static int max7360_mask_irqs(struct regmap *regmap) +{ + struct device *dev = regmap_get_device(regmap); + unsigned int val; + int ret; + + /* + * GPIO/PWM interrupts are not masked on reset: as the MAX7360 "INTI" + * interrupt line is shared between GPIOs and rotary encoder, this could + * result in repeated spurious interrupts on the rotary encoder driver + * if the GPIO driver is not loaded. Mask them now to avoid this + * situation. + */ + for (unsigned int i = 0; i < MAX7360_PORT_PWM_COUNT; i++) { + ret = regmap_write_bits(regmap, MAX7360_REG_PWMCFG(i), + MAX7360_PORT_CFG_INTERRUPT_MASK, + MAX7360_PORT_CFG_INTERRUPT_MASK); + if (ret) + return dev_err_probe(dev, ret, + "Failed to write MAX7360 port configuration\n"); + } + + /* Read GPIO in register, to ACK any pending IRQ. */ + ret = regmap_read(regmap, MAX7360_REG_GPIOIN, &val); + if (ret) + return dev_err_probe(dev, ret, "Failed to read GPIO values\n"); + + return 0; +} + +static int max7360_reset(struct regmap *regmap) +{ + struct device *dev = regmap_get_device(regmap); + int ret; + + ret = regmap_write(regmap, MAX7360_REG_GPIOCFG, MAX7360_GPIO_CFG_GPIO_RST); + if (ret) { + dev_err(dev, "Failed to reset GPIO configuration: %x\n", ret); + return ret; + } + + ret = regcache_drop_region(regmap, MAX7360_REG_GPIOCFG, MAX7360_REG_GPIO_LAST); + if (ret) { + dev_err(dev, "Failed to drop regmap cache: %x\n", ret); + return ret; + } + + ret = regmap_write(regmap, MAX7360_REG_SLEEP, 0); + if (ret) { + dev_err(dev, "Failed to reset autosleep configuration: %x\n", ret); + return ret; + } + + ret = regmap_write(regmap, MAX7360_REG_DEBOUNCE, 0); + if (ret) + dev_err(dev, "Failed to reset GPO port count: %x\n", ret); + + return ret; +} + +static int max7360_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct regmap *regmap; + int ret; + + regmap = devm_regmap_init_i2c(client, &max7360_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), "Failed to initialise regmap\n"); + + ret = max7360_reset(regmap); + if (ret) + return dev_err_probe(dev, ret, "Failed to reset device\n"); + + /* Get the device out of shutdown mode. */ + ret = regmap_write_bits(regmap, MAX7360_REG_GPIOCFG, + MAX7360_GPIO_CFG_GPIO_EN, + MAX7360_GPIO_CFG_GPIO_EN); + if (ret) + return dev_err_probe(dev, ret, "Failed to enable GPIO and PWM module\n"); + + ret = max7360_mask_irqs(regmap); + if (ret) + return dev_err_probe(dev, ret, "Could not mask interrupts\n"); + + ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, + max7360_cells, ARRAY_SIZE(max7360_cells), + NULL, 0, NULL); + if (ret) + return dev_err_probe(dev, ret, "Failed to register child devices\n"); + + return 0; +} + +static const struct of_device_id max7360_dt_match[] = { + { .compatible = "maxim,max7360" }, + {} +}; +MODULE_DEVICE_TABLE(of, max7360_dt_match); + +static struct i2c_driver max7360_driver = { + .driver = { + .name = "max7360", + .of_match_table = max7360_dt_match, + }, + .probe = max7360_probe, +}; +module_i2c_driver(max7360_driver); + +MODULE_DESCRIPTION("Maxim MAX7360 I2C IO Expander core driver"); +MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/nct6694.c b/drivers/mfd/nct6694.c new file mode 100644 index 000000000000..308b2fda3055 --- /dev/null +++ b/drivers/mfd/nct6694.c @@ -0,0 +1,388 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2025 Nuvoton Technology Corp. + * + * Nuvoton NCT6694 core driver using USB interface to provide + * access to the NCT6694 hardware monitoring and control features. + * + * The NCT6694 is an integrated controller that provides GPIO, I2C, + * CAN, WDT, HWMON and RTC management. + */ + +#include <linux/bits.h> +#include <linux/interrupt.h> +#include <linux/idr.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/kernel.h> +#include <linux/mfd/core.h> +#include <linux/mfd/nct6694.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/usb.h> + +static const struct mfd_cell nct6694_devs[] = { + MFD_CELL_NAME("nct6694-gpio"), + MFD_CELL_NAME("nct6694-gpio"), + MFD_CELL_NAME("nct6694-gpio"), + MFD_CELL_NAME("nct6694-gpio"), + MFD_CELL_NAME("nct6694-gpio"), + MFD_CELL_NAME("nct6694-gpio"), + MFD_CELL_NAME("nct6694-gpio"), + MFD_CELL_NAME("nct6694-gpio"), + MFD_CELL_NAME("nct6694-gpio"), + MFD_CELL_NAME("nct6694-gpio"), + MFD_CELL_NAME("nct6694-gpio"), + MFD_CELL_NAME("nct6694-gpio"), + MFD_CELL_NAME("nct6694-gpio"), + MFD_CELL_NAME("nct6694-gpio"), + MFD_CELL_NAME("nct6694-gpio"), + MFD_CELL_NAME("nct6694-gpio"), + + MFD_CELL_NAME("nct6694-i2c"), + MFD_CELL_NAME("nct6694-i2c"), + MFD_CELL_NAME("nct6694-i2c"), + MFD_CELL_NAME("nct6694-i2c"), + MFD_CELL_NAME("nct6694-i2c"), + MFD_CELL_NAME("nct6694-i2c"), + + MFD_CELL_NAME("nct6694-canfd"), + MFD_CELL_NAME("nct6694-canfd"), + + MFD_CELL_NAME("nct6694-wdt"), + MFD_CELL_NAME("nct6694-wdt"), + + MFD_CELL_NAME("nct6694-hwmon"), + + MFD_CELL_NAME("nct6694-rtc"), +}; + +static int nct6694_response_err_handling(struct nct6694 *nct6694, unsigned char err_status) +{ + switch (err_status) { + case NCT6694_NO_ERROR: + return 0; + case NCT6694_NOT_SUPPORT_ERROR: + dev_err(nct6694->dev, "Command is not supported!\n"); + break; + case NCT6694_NO_RESPONSE_ERROR: + dev_warn(nct6694->dev, "Command received no response!\n"); + break; + case NCT6694_TIMEOUT_ERROR: + dev_warn(nct6694->dev, "Command timed out!\n"); + break; + case NCT6694_PENDING: + dev_err(nct6694->dev, "Command is pending!\n"); + break; + default: + return -EINVAL; + } + + return -EIO; +} + +/** + * nct6694_read_msg() - Read message from NCT6694 device + * @nct6694: NCT6694 device pointer + * @cmd_hd: command header structure + * @buf: buffer to store the response data + * + * Sends a command to the NCT6694 device and reads the response. + * The command header is specified in @cmd_hd, and the response + * data is stored in @buf. + * + * Return: Negative value on error or 0 on success. + */ +int nct6694_read_msg(struct nct6694 *nct6694, const struct nct6694_cmd_header *cmd_hd, void *buf) +{ + union nct6694_usb_msg *msg = nct6694->usb_msg; + struct usb_device *udev = nct6694->udev; + int tx_len, rx_len, ret; + + guard(mutex)(&nct6694->access_lock); + + memcpy(&msg->cmd_header, cmd_hd, sizeof(*cmd_hd)); + msg->cmd_header.hctrl = NCT6694_HCTRL_GET; + + /* Send command packet to USB device */ + ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, NCT6694_BULK_OUT_EP), &msg->cmd_header, + sizeof(*msg), &tx_len, NCT6694_URB_TIMEOUT); + if (ret) + return ret; + + /* Receive response packet from USB device */ + ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, NCT6694_BULK_IN_EP), &msg->response_header, + sizeof(*msg), &rx_len, NCT6694_URB_TIMEOUT); + if (ret) + return ret; + + /* Receive data packet from USB device */ + ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, NCT6694_BULK_IN_EP), buf, + le16_to_cpu(cmd_hd->len), &rx_len, NCT6694_URB_TIMEOUT); + if (ret) + return ret; + + if (rx_len != le16_to_cpu(cmd_hd->len)) { + dev_err(nct6694->dev, "Expected received length %d, but got %d\n", + le16_to_cpu(cmd_hd->len), rx_len); + return -EIO; + } + + return nct6694_response_err_handling(nct6694, msg->response_header.sts); +} +EXPORT_SYMBOL_GPL(nct6694_read_msg); + +/** + * nct6694_write_msg() - Write message to NCT6694 device + * @nct6694: NCT6694 device pointer + * @cmd_hd: command header structure + * @buf: buffer containing the data to be sent + * + * Sends a command to the NCT6694 device and writes the data + * from @buf. The command header is specified in @cmd_hd. + * + * Return: Negative value on error or 0 on success. + */ +int nct6694_write_msg(struct nct6694 *nct6694, const struct nct6694_cmd_header *cmd_hd, void *buf) +{ + union nct6694_usb_msg *msg = nct6694->usb_msg; + struct usb_device *udev = nct6694->udev; + int tx_len, rx_len, ret; + + guard(mutex)(&nct6694->access_lock); + + memcpy(&msg->cmd_header, cmd_hd, sizeof(*cmd_hd)); + msg->cmd_header.hctrl = NCT6694_HCTRL_SET; + + /* Send command packet to USB device */ + ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, NCT6694_BULK_OUT_EP), &msg->cmd_header, + sizeof(*msg), &tx_len, NCT6694_URB_TIMEOUT); + if (ret) + return ret; + + /* Send data packet to USB device */ + ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, NCT6694_BULK_OUT_EP), buf, + le16_to_cpu(cmd_hd->len), &tx_len, NCT6694_URB_TIMEOUT); + if (ret) + return ret; + + /* Receive response packet from USB device */ + ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, NCT6694_BULK_IN_EP), &msg->response_header, + sizeof(*msg), &rx_len, NCT6694_URB_TIMEOUT); + if (ret) + return ret; + + /* Receive data packet from USB device */ + ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, NCT6694_BULK_IN_EP), buf, + le16_to_cpu(cmd_hd->len), &rx_len, NCT6694_URB_TIMEOUT); + if (ret) + return ret; + + if (rx_len != le16_to_cpu(cmd_hd->len)) { + dev_err(nct6694->dev, "Expected transmitted length %d, but got %d\n", + le16_to_cpu(cmd_hd->len), rx_len); + return -EIO; + } + + return nct6694_response_err_handling(nct6694, msg->response_header.sts); +} +EXPORT_SYMBOL_GPL(nct6694_write_msg); + +static void usb_int_callback(struct urb *urb) +{ + struct nct6694 *nct6694 = urb->context; + __le32 *status_le = urb->transfer_buffer; + u32 int_status; + int ret; + + switch (urb->status) { + case 0: + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + return; + default: + goto resubmit; + } + + int_status = le32_to_cpu(*status_le); + + while (int_status) { + int irq = __ffs(int_status); + + generic_handle_irq_safe(irq_find_mapping(nct6694->domain, irq)); + int_status &= ~BIT(irq); + } + +resubmit: + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret) + dev_warn(nct6694->dev, "Failed to resubmit urb, status %pe", ERR_PTR(ret)); +} + +static void nct6694_irq_enable(struct irq_data *data) +{ + struct nct6694 *nct6694 = irq_data_get_irq_chip_data(data); + irq_hw_number_t hwirq = irqd_to_hwirq(data); + + guard(spinlock_irqsave)(&nct6694->irq_lock); + + nct6694->irq_enable |= BIT(hwirq); +} + +static void nct6694_irq_disable(struct irq_data *data) +{ + struct nct6694 *nct6694 = irq_data_get_irq_chip_data(data); + irq_hw_number_t hwirq = irqd_to_hwirq(data); + + guard(spinlock_irqsave)(&nct6694->irq_lock); + + nct6694->irq_enable &= ~BIT(hwirq); +} + +static const struct irq_chip nct6694_irq_chip = { + .name = "nct6694-irq", + .flags = IRQCHIP_SKIP_SET_WAKE, + .irq_enable = nct6694_irq_enable, + .irq_disable = nct6694_irq_disable, +}; + +static int nct6694_irq_domain_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) +{ + struct nct6694 *nct6694 = d->host_data; + + irq_set_chip_data(irq, nct6694); + irq_set_chip_and_handler(irq, &nct6694_irq_chip, handle_simple_irq); + + return 0; +} + +static void nct6694_irq_domain_unmap(struct irq_domain *d, unsigned int irq) +{ + irq_set_chip_and_handler(irq, NULL, NULL); + irq_set_chip_data(irq, NULL); +} + +static const struct irq_domain_ops nct6694_irq_domain_ops = { + .map = nct6694_irq_domain_map, + .unmap = nct6694_irq_domain_unmap, +}; + +static int nct6694_usb_probe(struct usb_interface *iface, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(iface); + struct usb_endpoint_descriptor *int_endpoint; + struct usb_host_interface *interface; + struct device *dev = &iface->dev; + struct nct6694 *nct6694; + int ret; + + nct6694 = devm_kzalloc(dev, sizeof(*nct6694), GFP_KERNEL); + if (!nct6694) + return -ENOMEM; + + nct6694->usb_msg = devm_kzalloc(dev, sizeof(union nct6694_usb_msg), GFP_KERNEL); + if (!nct6694->usb_msg) + return -ENOMEM; + + nct6694->int_buffer = devm_kzalloc(dev, sizeof(*nct6694->int_buffer), GFP_KERNEL); + if (!nct6694->int_buffer) + return -ENOMEM; + + nct6694->int_in_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!nct6694->int_in_urb) + return -ENOMEM; + + nct6694->domain = irq_domain_create_simple(NULL, NCT6694_NR_IRQS, 0, + &nct6694_irq_domain_ops, + nct6694); + if (!nct6694->domain) { + ret = -ENODEV; + goto err_urb; + } + + nct6694->dev = dev; + nct6694->udev = udev; + + ida_init(&nct6694->gpio_ida); + ida_init(&nct6694->i2c_ida); + ida_init(&nct6694->canfd_ida); + ida_init(&nct6694->wdt_ida); + + spin_lock_init(&nct6694->irq_lock); + + ret = devm_mutex_init(dev, &nct6694->access_lock); + if (ret) + goto err_ida; + + interface = iface->cur_altsetting; + + int_endpoint = &interface->endpoint[0].desc; + if (!usb_endpoint_is_int_in(int_endpoint)) { + ret = -ENODEV; + goto err_ida; + } + + usb_fill_int_urb(nct6694->int_in_urb, udev, usb_rcvintpipe(udev, NCT6694_INT_IN_EP), + nct6694->int_buffer, sizeof(*nct6694->int_buffer), usb_int_callback, + nct6694, int_endpoint->bInterval); + + ret = usb_submit_urb(nct6694->int_in_urb, GFP_KERNEL); + if (ret) + goto err_ida; + + usb_set_intfdata(iface, nct6694); + + ret = mfd_add_hotplug_devices(dev, nct6694_devs, ARRAY_SIZE(nct6694_devs)); + if (ret) + goto err_mfd; + + return 0; + +err_mfd: + usb_kill_urb(nct6694->int_in_urb); +err_ida: + ida_destroy(&nct6694->wdt_ida); + ida_destroy(&nct6694->canfd_ida); + ida_destroy(&nct6694->i2c_ida); + ida_destroy(&nct6694->gpio_ida); + irq_domain_remove(nct6694->domain); +err_urb: + usb_free_urb(nct6694->int_in_urb); + return ret; +} + +static void nct6694_usb_disconnect(struct usb_interface *iface) +{ + struct nct6694 *nct6694 = usb_get_intfdata(iface); + + mfd_remove_devices(nct6694->dev); + usb_kill_urb(nct6694->int_in_urb); + ida_destroy(&nct6694->wdt_ida); + ida_destroy(&nct6694->canfd_ida); + ida_destroy(&nct6694->i2c_ida); + ida_destroy(&nct6694->gpio_ida); + irq_domain_remove(nct6694->domain); + usb_free_urb(nct6694->int_in_urb); +} + +static const struct usb_device_id nct6694_ids[] = { + { USB_DEVICE_AND_INTERFACE_INFO(NCT6694_VENDOR_ID, NCT6694_PRODUCT_ID, 0xFF, 0x00, 0x00) }, + { } +}; +MODULE_DEVICE_TABLE(usb, nct6694_ids); + +static struct usb_driver nct6694_usb_driver = { + .name = "nct6694", + .id_table = nct6694_ids, + .probe = nct6694_usb_probe, + .disconnect = nct6694_usb_disconnect, +}; +module_usb_driver(nct6694_usb_driver); + +MODULE_DESCRIPTION("Nuvoton NCT6694 core driver"); +MODULE_AUTHOR("Ming Yu <tmyu0@nuvoton.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c index fe018bedab98..c24ae16f1d96 100644 --- a/drivers/mfd/stmpe-i2c.c +++ b/drivers/mfd/stmpe-i2c.c @@ -137,3 +137,4 @@ module_exit(stmpe_exit); MODULE_DESCRIPTION("STMPE MFD I2C Interface Driver"); MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/stmpe-spi.c b/drivers/mfd/stmpe-spi.c index b9cc85ea2c40..9b7bcb03d54c 100644 --- a/drivers/mfd/stmpe-spi.c +++ b/drivers/mfd/stmpe-spi.c @@ -156,3 +156,4 @@ module_exit(stmpe_exit); MODULE_DESCRIPTION("STMPE MFD SPI Interface Driver"); MODULE_AUTHOR("Viresh Kumar <vireshk@kernel.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 819d19dc9b4a..0cb7af11ea60 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -1482,6 +1482,7 @@ int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum) return ret; } +EXPORT_SYMBOL_GPL(stmpe_probe); void stmpe_remove(struct stmpe *stmpe) { @@ -1494,6 +1495,7 @@ void stmpe_remove(struct stmpe *stmpe) mfd_remove_devices(stmpe->dev); } +EXPORT_SYMBOL_GPL(stmpe_remove); static int stmpe_suspend(struct device *dev) { @@ -1517,3 +1519,7 @@ static int stmpe_resume(struct device *dev) EXPORT_GPL_SIMPLE_DEV_PM_OPS(stmpe_dev_pm_ops, stmpe_suspend, stmpe_resume); + +MODULE_DESCRIPTION("STMPE Core driver"); +MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c index fc2daffc4352..9399eb850ca2 100644 --- a/drivers/mfd/vexpress-sysreg.c +++ b/drivers/mfd/vexpress-sysreg.c @@ -5,6 +5,7 @@ */ #include <linux/gpio/driver.h> +#include <linux/gpio/generic.h> #include <linux/err.h> #include <linux/io.h> #include <linux/mfd/core.h> @@ -96,9 +97,11 @@ static struct mfd_cell vexpress_sysreg_cells[] = { static int vexpress_sysreg_probe(struct platform_device *pdev) { + struct gpio_generic_chip *mmc_gpio_chip; + struct gpio_generic_chip_config config; struct resource *mem; void __iomem *base; - struct gpio_chip *mmc_gpio_chip; + int ret; mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!mem) @@ -116,10 +119,22 @@ static int vexpress_sysreg_probe(struct platform_device *pdev) GFP_KERNEL); if (!mmc_gpio_chip) return -ENOMEM; - bgpio_init(mmc_gpio_chip, &pdev->dev, 0x4, base + SYS_MCI, - NULL, NULL, NULL, NULL, 0); - mmc_gpio_chip->ngpio = 2; - devm_gpiochip_add_data(&pdev->dev, mmc_gpio_chip, NULL); + + config = (typeof(config)){ + .dev = &pdev->dev, + .sz = 4, + .dat = base + SYS_MCI, + }; + + ret = gpio_generic_chip_init(mmc_gpio_chip, &config); + if (ret) + return ret; + + mmc_gpio_chip->gc.ngpio = 2; + + ret = devm_gpiochip_add_data(&pdev->dev, &mmc_gpio_chip->gc, NULL); + if (ret) + return ret; return devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO, vexpress_sysreg_cells, |