diff options
Diffstat (limited to 'include/linux')
34 files changed, 356 insertions, 74 deletions
diff --git a/include/linux/bits.h b/include/linux/bits.h index 7f475d59a097..87d112650dfb 100644 --- a/include/linux/bits.h +++ b/include/linux/bits.h @@ -22,7 +22,7 @@ #include <linux/build_bug.h> #define GENMASK_INPUT_CHECK(h, l) \ (BUILD_BUG_ON_ZERO(__builtin_choose_expr( \ - __builtin_constant_p((l) > (h)), (l) > (h), 0))) + __is_constexpr((l) > (h)), (l) > (h), 0))) #else /* * BUILD_BUG_ON_ZERO is not available in h files included from asm files, diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 1255823b2bc0..f69c75bd6d27 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -676,11 +676,6 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q); extern void blk_set_pm_only(struct request_queue *q); extern void blk_clear_pm_only(struct request_queue *q); -static inline bool blk_account_rq(struct request *rq) -{ - return (rq->rq_flags & RQF_STARTED) && !blk_rq_is_passthrough(rq); -} - #define list_entry_rq(ptr) list_entry((ptr), struct request, queuelist) #define rq_data_dir(rq) (op_is_write(req_op(rq)) ? WRITE : READ) diff --git a/include/linux/cgroup-defs.h b/include/linux/cgroup-defs.h index 559ee05f86b2..fb8f6d2cd104 100644 --- a/include/linux/cgroup-defs.h +++ b/include/linux/cgroup-defs.h @@ -232,7 +232,7 @@ struct css_set { struct list_head task_iters; /* - * On the default hierarhcy, ->subsys[ssid] may point to a css + * On the default hierarchy, ->subsys[ssid] may point to a css * attached to an ancestor instead of the cgroup this css_set is * associated with. The following node is anchored at * ->subsys[ssid]->cgroup->e_csets[ssid] and provides a way to @@ -668,7 +668,7 @@ struct cgroup_subsys { */ bool threaded:1; - /* the following two fields are initialized automtically during boot */ + /* the following two fields are initialized automatically during boot */ int id; const char *name; @@ -757,7 +757,7 @@ static inline void cgroup_threadgroup_change_end(struct task_struct *tsk) {} * sock_cgroup_data overloads (prioidx, classid) and the cgroup pointer. * On boot, sock_cgroup_data records the cgroup that the sock was created * in so that cgroup2 matches can be made; however, once either net_prio or - * net_cls starts being used, the area is overriden to carry prioidx and/or + * net_cls starts being used, the area is overridden to carry prioidx and/or * classid. The two modes are distinguished by whether the lowest bit is * set. Clear bit indicates cgroup pointer while set bit prioidx and * classid. diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 4f2f79de083e..6bc9c76680b2 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -32,7 +32,7 @@ struct kernel_clone_args; #ifdef CONFIG_CGROUPS /* - * All weight knobs on the default hierarhcy should use the following min, + * All weight knobs on the default hierarchy should use the following min, * default and max values. The default value is the logarithmic center of * MIN and MAX and allows 100x to be expressed in both directions. */ diff --git a/include/linux/compat.h b/include/linux/compat.h index 98dd7b324c35..8855b1b702b2 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -213,12 +213,11 @@ typedef struct compat_siginfo { /* SIGILL, SIGFPE, SIGSEGV, SIGBUS, SIGTRAP, SIGEMT */ struct { compat_uptr_t _addr; /* faulting insn/memory ref. */ -#ifdef __ARCH_SI_TRAPNO - int _trapno; /* TRAP # which caused the signal */ -#endif #define __COMPAT_ADDR_BND_PKEY_PAD (__alignof__(compat_uptr_t) < sizeof(short) ? \ sizeof(short) : __alignof__(compat_uptr_t)) union { + /* used on alpha and sparc */ + int _trapno; /* TRAP # which caused the signal */ /* * used when si_code=BUS_MCEERR_AR or * used when si_code=BUS_MCEERR_AO @@ -236,7 +235,10 @@ typedef struct compat_siginfo { u32 _pkey; } _addr_pkey; /* used when si_code=TRAP_PERF */ - compat_ulong_t _perf; + struct { + compat_ulong_t _data; + u32 _type; + } _perf; }; } _sigfault; diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h index 153734816b49..d5b9c8d40c18 100644 --- a/include/linux/console_struct.h +++ b/include/linux/console_struct.h @@ -101,6 +101,7 @@ struct vc_data { unsigned int vc_rows; unsigned int vc_size_row; /* Bytes per row */ unsigned int vc_scan_lines; /* # of scan lines */ + unsigned int vc_cell_height; /* CRTC character cell height */ unsigned long vc_origin; /* [!] Start of real screen */ unsigned long vc_scr_end; /* [!] End of real screen */ unsigned long vc_visible_origin; /* [!] Top of visible window */ diff --git a/include/linux/const.h b/include/linux/const.h index 81b8aae5a855..435ddd72d2c4 100644 --- a/include/linux/const.h +++ b/include/linux/const.h @@ -3,4 +3,12 @@ #include <vdso/const.h> +/* + * This returns a constant expression while determining if an argument is + * a constant expression, most importantly without evaluating the argument. + * Glory to Martin Uecker <Martin.Uecker@med.uni-goettingen.de> + */ +#define __is_constexpr(x) \ + (sizeof(int) == sizeof(*(8 ? ((void *)((long)(x) * 0l)) : (int *)8))) + #endif /* _LINUX_CONST_H */ diff --git a/include/linux/device.h b/include/linux/device.h index 38a2071cf776..f1a00040fa53 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -570,7 +570,7 @@ struct device { * @flags: Link flags. * @rpm_active: Whether or not the consumer device is runtime-PM-active. * @kref: Count repeated addition of the same link. - * @rcu_head: An RCU head to use for deferred execution of SRCU callbacks. + * @rm_work: Work structure used for removing the link. * @supplier_preactivated: Supplier has been made active before consumer probe. */ struct device_link { @@ -583,9 +583,7 @@ struct device_link { u32 flags; refcount_t rpm_active; struct kref kref; -#ifdef CONFIG_SRCU - struct rcu_head rcu_head; -#endif + struct work_struct rm_work; bool supplier_preactivated; /* Owned by consumer probe. */ }; diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h index a57ee75342cf..dce631e678dd 100644 --- a/include/linux/dynamic_debug.h +++ b/include/linux/dynamic_debug.h @@ -32,6 +32,11 @@ struct _ddebug { #define _DPRINTK_FLAGS_INCL_FUNCNAME (1<<2) #define _DPRINTK_FLAGS_INCL_LINENO (1<<3) #define _DPRINTK_FLAGS_INCL_TID (1<<4) + +#define _DPRINTK_FLAGS_INCL_ANY \ + (_DPRINTK_FLAGS_INCL_MODNAME | _DPRINTK_FLAGS_INCL_FUNCNAME |\ + _DPRINTK_FLAGS_INCL_LINENO | _DPRINTK_FLAGS_INCL_TID) + #if defined DEBUG #define _DPRINTK_FLAGS_DEFAULT _DPRINTK_FLAGS_PRINT #else diff --git a/include/linux/elevator.h b/include/linux/elevator.h index 1fe8e105b83b..dcb2f9022c1d 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -34,7 +34,7 @@ struct elevator_mq_ops { void (*depth_updated)(struct blk_mq_hw_ctx *); bool (*allow_merge)(struct request_queue *, struct request *, struct bio *); - bool (*bio_merge)(struct blk_mq_hw_ctx *, struct bio *, unsigned int); + bool (*bio_merge)(struct request_queue *, struct bio *, unsigned int); int (*request_merge)(struct request_queue *q, struct request **, struct bio *); void (*request_merged)(struct request_queue *, struct request *, enum elv_merge); void (*requests_merged)(struct request_queue *, struct request *, struct request *); diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h index ed4e67a7ff1c..59828516ebaf 100644 --- a/include/linux/fwnode.h +++ b/include/linux/fwnode.h @@ -187,5 +187,6 @@ extern u32 fw_devlink_get_flags(void); extern bool fw_devlink_is_strict(void); int fwnode_link_add(struct fwnode_handle *con, struct fwnode_handle *sup); void fwnode_links_purge(struct fwnode_handle *fwnode); +void fw_devlink_purge_absent_suppliers(struct fwnode_handle *fwnode); #endif diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 7e9660ea967d..6fc26f7bdf71 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -306,8 +306,6 @@ static inline void bd_unlink_disk_holder(struct block_device *bdev, } #endif /* CONFIG_SYSFS */ -extern struct rw_semaphore bdev_lookup_sem; - dev_t blk_lookup_devt(const char *name, int partno); void blk_request_module(dev_t devt); #ifdef CONFIG_BLOCK diff --git a/include/linux/init.h b/include/linux/init.h index 045ad1650ed1..d82b4b2e1d25 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -242,7 +242,8 @@ extern bool initcall_debug; asm(".section \"" __sec "\", \"a\" \n" \ __stringify(__name) ": \n" \ ".long " __stringify(__stub) " - . \n" \ - ".previous \n"); + ".previous \n"); \ + static_assert(__same_type(initcall_t, &fn)); #else #define ____define_initcall(fn, __unused, __name, __sec) \ static initcall_t __name __used \ diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 2f34487e21f2..76102efbf079 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -10,6 +10,7 @@ #include <linux/spinlock.h> #include <linux/signal.h> #include <linux/sched.h> +#include <linux/sched/stat.h> #include <linux/bug.h> #include <linux/minmax.h> #include <linux/mm.h> @@ -146,7 +147,7 @@ static inline bool is_error_page(struct page *page) */ #define KVM_REQ_TLB_FLUSH (0 | KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP) #define KVM_REQ_MMU_RELOAD (1 | KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP) -#define KVM_REQ_PENDING_TIMER 2 +#define KVM_REQ_UNBLOCK 2 #define KVM_REQ_UNHALT 3 #define KVM_REQUEST_ARCH_BASE 8 @@ -265,6 +266,11 @@ static inline bool kvm_vcpu_mapped(struct kvm_host_map *map) return !!map->hva; } +static inline bool kvm_vcpu_can_poll(ktime_t cur, ktime_t stop) +{ + return single_task_running() && !need_resched() && ktime_before(cur, stop); +} + /* * Sometimes a large or cross-page mmio needs to be broken up into separate * exits for userspace servicing. diff --git a/include/linux/libnvdimm.h b/include/linux/libnvdimm.h index 01f251b6e36c..89b69e645ac7 100644 --- a/include/linux/libnvdimm.h +++ b/include/linux/libnvdimm.h @@ -141,7 +141,6 @@ static inline void __iomem *devm_nvdimm_ioremap(struct device *dev, struct nvdimm_bus; struct module; -struct device; struct nd_blk_region; struct nd_blk_region_desc { int (*enable)(struct nvdimm_bus *nvdimm_bus, struct device *dev); diff --git a/include/linux/minmax.h b/include/linux/minmax.h index c0f57b0c64d9..5433c08fcc68 100644 --- a/include/linux/minmax.h +++ b/include/linux/minmax.h @@ -2,6 +2,8 @@ #ifndef _LINUX_MINMAX_H #define _LINUX_MINMAX_H +#include <linux/const.h> + /* * min()/max()/clamp() macros must accomplish three things: * @@ -17,14 +19,6 @@ #define __typecheck(x, y) \ (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1))) -/* - * This returns a constant expression while determining if an argument is - * a constant expression, most importantly without evaluating the argument. - * Glory to Martin Uecker <Martin.Uecker@med.uni-goettingen.de> - */ -#define __is_constexpr(x) \ - (sizeof(int) == sizeof(*(8 ? ((void *)((long)(x) * 0l)) : (int *)8))) - #define __no_side_effects(x, y) \ (__is_constexpr(x) && __is_constexpr(y)) diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index f8e8d7e90616..020a8f7fdbdd 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -703,6 +703,27 @@ struct mlx5_hv_vhca; #define MLX5_LOG_SW_ICM_BLOCK_SIZE(dev) (MLX5_CAP_DEV_MEM(dev, log_sw_icm_alloc_granularity)) #define MLX5_SW_ICM_BLOCK_SIZE(dev) (1 << MLX5_LOG_SW_ICM_BLOCK_SIZE(dev)) +enum { + MLX5_PROF_MASK_QP_SIZE = (u64)1 << 0, + MLX5_PROF_MASK_MR_CACHE = (u64)1 << 1, +}; + +enum { + MR_CACHE_LAST_STD_ENTRY = 20, + MLX5_IMR_MTT_CACHE_ENTRY, + MLX5_IMR_KSM_CACHE_ENTRY, + MAX_MR_CACHE_ENTRIES +}; + +struct mlx5_profile { + u64 mask; + u8 log_max_qp; + struct { + int size; + int limit; + } mr_cache[MAX_MR_CACHE_ENTRIES]; +}; + struct mlx5_core_dev { struct device *device; enum mlx5_coredev_type coredev_type; @@ -731,7 +752,7 @@ struct mlx5_core_dev { struct mutex intf_state_mutex; unsigned long intf_state; struct mlx5_priv priv; - struct mlx5_profile *profile; + struct mlx5_profile profile; u32 issi; struct mlx5e_resources mlx5e_res; struct mlx5_dm *dm; @@ -1083,18 +1104,6 @@ static inline u8 mlx5_mkey_variant(u32 mkey) return mkey & 0xff; } -enum { - MLX5_PROF_MASK_QP_SIZE = (u64)1 << 0, - MLX5_PROF_MASK_MR_CACHE = (u64)1 << 1, -}; - -enum { - MR_CACHE_LAST_STD_ENTRY = 20, - MLX5_IMR_MTT_CACHE_ENTRY, - MLX5_IMR_KSM_CACHE_ENTRY, - MAX_MR_CACHE_ENTRIES -}; - /* Async-atomic event notifier used by mlx5 core to forward FW * evetns recived from event queue to mlx5 consumers. * Optimise event queue dipatching. @@ -1148,15 +1157,6 @@ int mlx5_rdma_rn_get_params(struct mlx5_core_dev *mdev, struct ib_device *device, struct rdma_netdev_alloc_params *params); -struct mlx5_profile { - u64 mask; - u8 log_max_qp; - struct { - int size; - int limit; - } mr_cache[MAX_MR_CACHE_ENTRIES]; -}; - enum { MLX5_PCI_DEV_IS_VF = 1 << 0, }; diff --git a/include/linux/mlx5/mpfs.h b/include/linux/mlx5/mpfs.h new file mode 100644 index 000000000000..bf700c8d5516 --- /dev/null +++ b/include/linux/mlx5/mpfs.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB + * Copyright (c) 2021 Mellanox Technologies Ltd. + */ + +#ifndef _MLX5_MPFS_ +#define _MLX5_MPFS_ + +struct mlx5_core_dev; + +#ifdef CONFIG_MLX5_MPFS +int mlx5_mpfs_add_mac(struct mlx5_core_dev *dev, u8 *mac); +int mlx5_mpfs_del_mac(struct mlx5_core_dev *dev, u8 *mac); +#else /* #ifndef CONFIG_MLX5_MPFS */ +static inline int mlx5_mpfs_add_mac(struct mlx5_core_dev *dev, u8 *mac) { return 0; } +static inline int mlx5_mpfs_del_mac(struct mlx5_core_dev *dev, u8 *mac) { return 0; } +#endif + +#endif diff --git a/include/linux/mm.h b/include/linux/mm.h index 322ec61d0da7..c274f75efcf9 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -3216,5 +3216,37 @@ void mem_dump_obj(void *object); static inline void mem_dump_obj(void *object) {} #endif +/** + * seal_check_future_write - Check for F_SEAL_FUTURE_WRITE flag and handle it + * @seals: the seals to check + * @vma: the vma to operate on + * + * Check whether F_SEAL_FUTURE_WRITE is set; if so, do proper check/handling on + * the vma flags. Return 0 if check pass, or <0 for errors. + */ +static inline int seal_check_future_write(int seals, struct vm_area_struct *vma) +{ + if (seals & F_SEAL_FUTURE_WRITE) { + /* + * New PROT_WRITE and MAP_SHARED mmaps are not allowed when + * "future write" seal active. + */ + if ((vma->vm_flags & VM_SHARED) && (vma->vm_flags & VM_WRITE)) + return -EPERM; + + /* + * Since an F_SEAL_FUTURE_WRITE sealed memfd can be mapped as + * MAP_SHARED and read-only, take care to not allow mprotect to + * revert protections on such mappings. Do this only for shared + * mappings. For private mappings, don't need to mask + * VM_MAYWRITE as we still want them to be COW-writable. + */ + if (vma->vm_flags & VM_SHARED) + vma->vm_flags &= ~(VM_MAYWRITE); + } + + return 0; +} + #endif /* __KERNEL__ */ #endif /* _LINUX_MM_H */ diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 6613b26a8894..5aacc1c10a45 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -97,10 +97,10 @@ struct page { }; struct { /* page_pool used by netstack */ /** - * @dma_addr: might require a 64-bit value even on + * @dma_addr: might require a 64-bit value on * 32-bit architectures. */ - dma_addr_t dma_addr; + unsigned long dma_addr[2]; }; struct { /* slab, slob and slub */ union { diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index a4bd41128bf3..e89df447fae3 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -997,9 +997,9 @@ static inline loff_t readahead_pos(struct readahead_control *rac) * readahead_length - The number of bytes in this readahead request. * @rac: The readahead request. */ -static inline loff_t readahead_length(struct readahead_control *rac) +static inline size_t readahead_length(struct readahead_control *rac) { - return (loff_t)rac->_nr_pages * PAGE_SIZE; + return rac->_nr_pages * PAGE_SIZE; } /** @@ -1024,7 +1024,7 @@ static inline unsigned int readahead_count(struct readahead_control *rac) * readahead_batch_length - The number of bytes in the current batch. * @rac: The readahead request. */ -static inline loff_t readahead_batch_length(struct readahead_control *rac) +static inline size_t readahead_batch_length(struct readahead_control *rac) { return rac->_batch_count * PAGE_SIZE; } diff --git a/include/linux/phy.h b/include/linux/phy.h index 60d2b26026a2..852743f07e3e 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -496,6 +496,11 @@ struct macsec_ops; * @mac_managed_pm: Set true if MAC driver takes of suspending/resuming PHY * @state: State of the PHY for management purposes * @dev_flags: Device-specific flags used by the PHY driver. + * Bits [15:0] are free to use by the PHY driver to communicate + * driver specific behavior. + * Bits [23:16] are currently reserved for future use. + * Bits [31:24] are reserved for defining generic + * PHY driver behavior. * @irq: IRQ number of the PHY's interrupt (-1 if none) * @phy_timer: The timer for handling the state machine * @phylink: Pointer to phylink instance for this PHY diff --git a/include/linux/pm.h b/include/linux/pm.h index c9657408fee1..1d8209c09686 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -601,6 +601,7 @@ struct dev_pm_info { unsigned int idle_notification:1; unsigned int request_pending:1; unsigned int deferred_resume:1; + unsigned int needs_force_resume:1; unsigned int runtime_auto:1; bool ignore_children:1; unsigned int no_callbacks:1; diff --git a/include/linux/randomize_kstack.h b/include/linux/randomize_kstack.h index fd80fab663a9..bebc911161b6 100644 --- a/include/linux/randomize_kstack.h +++ b/include/linux/randomize_kstack.h @@ -38,7 +38,7 @@ void *__builtin_alloca(size_t size); u32 offset = raw_cpu_read(kstack_offset); \ u8 *ptr = __builtin_alloca(KSTACK_OFFSET_MAX(offset)); \ /* Keep allocation even after "ptr" loses scope. */ \ - asm volatile("" : "=o"(*ptr) :: "memory"); \ + asm volatile("" :: "r"(ptr) : "memory"); \ } \ } while (0) diff --git a/include/linux/reboot.h b/include/linux/reboot.h index 3734cd8f38a8..af907a3d68d1 100644 --- a/include/linux/reboot.h +++ b/include/linux/reboot.h @@ -79,6 +79,7 @@ extern char poweroff_cmd[POWEROFF_CMD_PATH_LEN]; extern void orderly_poweroff(bool force); extern void orderly_reboot(void); +void hw_protection_shutdown(const char *reason, int ms_until_forced); /* * Emergency restart, callable from an interrupt handler. diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 20e84a84fb77..f72ca73631be 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -119,6 +119,16 @@ struct regulator_dev; #define REGULATOR_EVENT_PRE_DISABLE 0x400 #define REGULATOR_EVENT_ABORT_DISABLE 0x800 #define REGULATOR_EVENT_ENABLE 0x1000 +/* + * Following notifications should be emitted only if detected condition + * is such that the HW is likely to still be working but consumers should + * take a recovery action to prevent problems esacalating into errors. + */ +#define REGULATOR_EVENT_UNDER_VOLTAGE_WARN 0x2000 +#define REGULATOR_EVENT_OVER_CURRENT_WARN 0x4000 +#define REGULATOR_EVENT_OVER_VOLTAGE_WARN 0x8000 +#define REGULATOR_EVENT_OVER_TEMP_WARN 0x10000 +#define REGULATOR_EVENT_WARN_MASK 0x1E000 /* * Regulator errors that can be queried using regulator_get_error_flags @@ -138,6 +148,10 @@ struct regulator_dev; #define REGULATOR_ERROR_FAIL BIT(4) #define REGULATOR_ERROR_OVER_TEMP BIT(5) +#define REGULATOR_ERROR_UNDER_VOLTAGE_WARN BIT(6) +#define REGULATOR_ERROR_OVER_CURRENT_WARN BIT(7) +#define REGULATOR_ERROR_OVER_VOLTAGE_WARN BIT(8) +#define REGULATOR_ERROR_OVER_TEMP_WARN BIT(9) /** * struct pre_voltage_change_data - Data sent with PRE_VOLTAGE_CHANGE event diff --git a/include/linux/regulator/coupler.h b/include/linux/regulator/coupler.h index 5f86824bd117..73291f280a23 100644 --- a/include/linux/regulator/coupler.h +++ b/include/linux/regulator/coupler.h @@ -52,7 +52,6 @@ struct regulator_coupler { #ifdef CONFIG_REGULATOR int regulator_coupler_register(struct regulator_coupler *coupler); -const char *rdev_get_name(struct regulator_dev *rdev); int regulator_check_consumers(struct regulator_dev *rdev, int *min_uV, int *max_uV, suspend_state_t state); @@ -69,10 +68,6 @@ static inline int regulator_coupler_register(struct regulator_coupler *coupler) { return 0; } -static inline const char *rdev_get_name(struct regulator_dev *rdev) -{ - return NULL; -} static inline int regulator_check_consumers(struct regulator_dev *rdev, int *min_uV, int *max_uV, suspend_state_t state) diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 35e5a611db81..4aec20387857 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -40,6 +40,15 @@ enum regulator_status { REGULATOR_STATUS_UNDEFINED, }; +enum regulator_detection_severity { + /* Hardware shut down voltage outputs if condition is detected */ + REGULATOR_SEVERITY_PROT, + /* Hardware is probably damaged/inoperable */ + REGULATOR_SEVERITY_ERR, + /* Hardware is still recoverable but recovery action must be taken */ + REGULATOR_SEVERITY_WARN, +}; + /* Initialize struct linear_range for regulators */ #define REGULATOR_LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV) \ { \ @@ -78,8 +87,25 @@ enum regulator_status { * @get_current_limit: Get the configured limit for a current-limited regulator. * @set_input_current_limit: Configure an input limit. * - * @set_over_current_protection: Support capability of automatically shutting - * down when detecting an over current event. + * @set_over_current_protection: Support enabling of and setting limits for over + * current situation detection. Detection can be configured for three + * levels of severity. + * REGULATOR_SEVERITY_PROT should automatically shut down the regulator(s). + * REGULATOR_SEVERITY_ERR should indicate that over-current situation is + * caused by an unrecoverable error but HW does not perform + * automatic shut down. + * REGULATOR_SEVERITY_WARN should indicate situation where hardware is + * still believed to not be damaged but that a board sepcific + * recovery action is needed. If lim_uA is 0 the limit should not + * be changed but the detection should just be enabled/disabled as + * is requested. + * @set_over_voltage_protection: Support enabling of and setting limits for over + * voltage situation detection. Detection can be configured for same + * severities as over current protection. + * @set_under_voltage_protection: Support enabling of and setting limits for + * under situation detection. + * @set_thermal_protection: Support enabling of and setting limits for over + * temperature situation detection. * * @set_active_discharge: Set active discharge enable/disable of regulators. * @@ -143,8 +169,15 @@ struct regulator_ops { int (*get_current_limit) (struct regulator_dev *); int (*set_input_current_limit) (struct regulator_dev *, int lim_uA); - int (*set_over_current_protection) (struct regulator_dev *); - int (*set_active_discharge) (struct regulator_dev *, bool enable); + int (*set_over_current_protection)(struct regulator_dev *, int lim_uA, + int severity, bool enable); + int (*set_over_voltage_protection)(struct regulator_dev *, int lim_uV, + int severity, bool enable); + int (*set_under_voltage_protection)(struct regulator_dev *, int lim_uV, + int severity, bool enable); + int (*set_thermal_protection)(struct regulator_dev *, int lim, + int severity, bool enable); + int (*set_active_discharge)(struct regulator_dev *, bool enable); /* enable/disable regulator */ int (*enable) (struct regulator_dev *); @@ -413,6 +446,128 @@ struct regulator_config { struct gpio_desc *ena_gpiod; }; +/** + * struct regulator_err_state - regulator error/notification status + * + * @rdev: Regulator which status the struct indicates. + * @notifs: Events which have occurred on the regulator. + * @errors: Errors which are active on the regulator. + * @possible_errs: Errors which can be signaled (by given IRQ). + */ +struct regulator_err_state { + struct regulator_dev *rdev; + unsigned long notifs; + unsigned long errors; + int possible_errs; +}; + +/** + * struct regulator_irq_data - regulator error/notification status date + * + * @states: Status structs for each of the associated regulators. + * @num_states: Amount of associated regulators. + * @data: Driver data pointer given at regulator_irq_desc. + * @opaque: Value storage for IC driver. Core does not update this. ICs + * may want to store status register value here at map_event and + * compare contents at 'renable' callback to see if new problems + * have been added to status. If that is the case it may be + * desirable to return REGULATOR_ERROR_CLEARED and not + * REGULATOR_ERROR_ON to allow IRQ fire again and to generate + * notifications also for the new issues. + * + * This structure is passed to 'map_event' and 'renable' callbacks for + * reporting regulator status to core. + */ +struct regulator_irq_data { + struct regulator_err_state *states; + int num_states; + void *data; + long opaque; +}; + +/** + * struct regulator_irq_desc - notification sender for IRQ based events. + * + * @name: The visible name for the IRQ + * @fatal_cnt: If this IRQ is used to signal HW damaging condition it may be + * best to shut-down regulator(s) or reboot the SOC if error + * handling is repeatedly failing. If fatal_cnt is given the IRQ + * handling is aborted if it fails for fatal_cnt times and die() + * callback (if populated) or BUG() is called to try to prevent + * further damage. + * @reread_ms: The time which is waited before attempting to re-read status + * at the worker if IC reading fails. Immediate re-read is done + * if time is not specified. + * @irq_off_ms: The time which IRQ is kept disabled before re-evaluating the + * status for devices which keep IRQ disabled for duration of the + * error. If this is not given the IRQ is left enabled and renable + * is not called. + * @skip_off: If set to true the IRQ handler will attempt to check if any of + * the associated regulators are enabled prior to taking other + * actions. If no regulators are enabled and this is set to true + * a spurious IRQ is assumed and IRQ_NONE is returned. + * @high_prio: Boolean to indicate that high priority WQ should be used. + * @data: Driver private data pointer which will be passed as such to + * the renable, map_event and die callbacks in regulator_irq_data. + * @die: Protection callback. If IC status reading or recovery actions + * fail fatal_cnt times this callback or BUG() is called. This + * callback should implement a final protection attempt like + * disabling the regulator. If protection succeeded this may + * return 0. If anything else is returned the core assumes final + * protection failed and calls BUG() as a last resort. + * @map_event: Driver callback to map IRQ status into regulator devices with + * events / errors. NOTE: callback MUST initialize both the + * errors and notifs for all rdevs which it signals having + * active events as core does not clean the map data. + * REGULATOR_FAILED_RETRY can be returned to indicate that the + * status reading from IC failed. If this is repeated for + * fatal_cnt times the core will call die() callback or BUG() + * as a last resort to protect the HW. + * @renable: Optional callback to check status (if HW supports that) before + * re-enabling IRQ. If implemented this should clear the error + * flags so that errors fetched by regulator_get_error_flags() + * are updated. If callback is not implemented then errors are + * assumed to be cleared and IRQ is re-enabled. + * REGULATOR_FAILED_RETRY can be returned to + * indicate that the status reading from IC failed. If this is + * repeated for 'fatal_cnt' times the core will call die() + * callback or BUG() as a last resort to protect the HW. + * Returning zero indicates that the problem in HW has been solved + * and IRQ will be re-enabled. Returning REGULATOR_ERROR_ON + * indicates the error condition is still active and keeps IRQ + * disabled. Please note that returning REGULATOR_ERROR_ON does + * not retrigger evaluating what events are active or resending + * notifications. If this is needed you probably want to return + * zero and allow IRQ to retrigger causing events to be + * re-evaluated and re-sent. + * + * This structure is used for registering regulator IRQ notification helper. + */ +struct regulator_irq_desc { + const char *name; + int irq_flags; + int fatal_cnt; + int reread_ms; + int irq_off_ms; + bool skip_off; + bool high_prio; + void *data; + + int (*die)(struct regulator_irq_data *rid); + int (*map_event)(int irq, struct regulator_irq_data *rid, + unsigned long *dev_mask); + int (*renable)(struct regulator_irq_data *rid); +}; + +/* + * Return values for regulator IRQ helpers. + */ +enum { + REGULATOR_ERROR_CLEARED, + REGULATOR_FAILED_RETRY, + REGULATOR_ERROR_ON, +}; + /* * struct coupling_desc * @@ -477,6 +632,9 @@ struct regulator_dev { /* time when this regulator was disabled last time */ ktime_t last_off; + int cached_err; + bool use_cached_err; + spinlock_t err_lock; }; struct regulator_dev * @@ -491,6 +649,16 @@ void devm_regulator_unregister(struct device *dev, struct regulator_dev *rdev); int regulator_notifier_call_chain(struct regulator_dev *rdev, unsigned long event, void *data); +void *devm_regulator_irq_helper(struct device *dev, + const struct regulator_irq_desc *d, int irq, + int irq_flags, int common_errs, + int *per_rdev_errs, struct regulator_dev **rdev, + int rdev_amount); +void *regulator_irq_helper(struct device *dev, + const struct regulator_irq_desc *d, int irq, + int irq_flags, int common_errs, int *per_rdev_errs, + struct regulator_dev **rdev, int rdev_amount); +void regulator_irq_helper_cancel(void **handle); void *rdev_get_drvdata(struct regulator_dev *rdev); struct device *rdev_get_dev(struct regulator_dev *rdev); @@ -551,4 +719,14 @@ int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc, int regulator_desc_list_voltage_linear(const struct regulator_desc *desc, unsigned int selector); + +#ifdef CONFIG_REGULATOR +const char *rdev_get_name(struct regulator_dev *rdev); +#else +static inline const char *rdev_get_name(struct regulator_dev *rdev) +{ + return NULL; +} +#endif + #endif diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 8a56f033b6cd..68b4a514a410 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -83,6 +83,14 @@ struct regulator_state { bool changeable; }; +#define REGULATOR_NOTIF_LIMIT_DISABLE -1 +#define REGULATOR_NOTIF_LIMIT_ENABLE -2 +struct notification_limit { + int prot; + int err; + int warn; +}; + /** * struct regulation_constraints - regulator operating constraints. * @@ -100,6 +108,11 @@ struct regulator_state { * @ilim_uA: Maximum input current. * @system_load: Load that isn't captured by any consumer requests. * + * @over_curr_limits: Limits for acting on over current. + * @over_voltage_limits: Limits for acting on over voltage. + * @under_voltage_limits: Limits for acting on under voltage. + * @temp_limits: Limits for acting on over temperature. + * @max_spread: Max possible spread between coupled regulators * @max_uV_step: Max possible step change in voltage * @valid_modes_mask: Mask of modes which may be configured by consumers. @@ -116,6 +129,11 @@ struct regulator_state { * @pull_down: Enable pull down when regulator is disabled. * @over_current_protection: Auto disable on over current event. * + * @over_current_detection: Configure over current limits. + * @over_voltage_detection: Configure over voltage limits. + * @under_voltage_detection: Configure under voltage limits. + * @over_temp_detection: Configure over temperature limits. + * * @input_uV: Input voltage for regulator when supplied by another regulator. * * @state_disk: State for regulator when system is suspended in disk mode. @@ -172,6 +190,10 @@ struct regulation_constraints { struct regulator_state state_disk; struct regulator_state state_mem; struct regulator_state state_standby; + struct notification_limit over_curr_limits; + struct notification_limit over_voltage_limits; + struct notification_limit under_voltage_limits; + struct notification_limit temp_limits; suspend_state_t initial_state; /* suspend state to set at init */ /* mode to set on startup */ @@ -193,6 +215,10 @@ struct regulation_constraints { unsigned soft_start:1; /* ramp voltage slowly */ unsigned pull_down:1; /* pull down resistor when regulator off */ unsigned over_current_protection:1; /* auto disable on over current */ + unsigned over_current_detection:1; /* notify on over current */ + unsigned over_voltage_detection:1; /* notify on over voltage */ + unsigned under_voltage_detection:1; /* notify on under voltage */ + unsigned over_temp_detection:1; /* notify on over temperature */ }; /** diff --git a/include/linux/sched/signal.h b/include/linux/sched/signal.h index 3f6a0fcaa10c..7f4278fa21fe 100644 --- a/include/linux/sched/signal.h +++ b/include/linux/sched/signal.h @@ -326,6 +326,7 @@ int send_sig_mceerr(int code, void __user *, short, struct task_struct *); int force_sig_bnderr(void __user *addr, void __user *lower, void __user *upper); int force_sig_pkuerr(void __user *addr, u32 pkey); +int force_sig_perf(void __user *addr, u32 type, u64 sig_data); int force_sig_ptrace_errno_trap(int errno, void __user *addr); diff --git a/include/linux/signal.h b/include/linux/signal.h index 0dbfda8d99d0..201f88e3738b 100644 --- a/include/linux/signal.h +++ b/include/linux/signal.h @@ -40,6 +40,7 @@ enum siginfo_layout { SIL_TIMER, SIL_POLL, SIL_FAULT, + SIL_FAULT_TRAPNO, SIL_FAULT_MCEERR, SIL_FAULT_BNDERR, SIL_FAULT_PKUERR, diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 360a3bc767ca..74239d65c7fd 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -644,8 +644,8 @@ struct spi_controller { int *cs_gpios; struct gpio_desc **cs_gpiods; bool use_gpio_descriptors; - u8 unused_native_cs; - u8 max_native_cs; + s8 unused_native_cs; + s8 max_native_cs; /* statistics */ struct spi_statistics statistics; diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index d81fe8b364d0..61b622e334ee 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -368,6 +368,8 @@ struct rpc_xprt * xprt_alloc(struct net *net, size_t size, unsigned int num_prealloc, unsigned int max_req); void xprt_free(struct rpc_xprt *); +void xprt_add_backlog(struct rpc_xprt *xprt, struct rpc_task *task); +bool xprt_wake_up_backlog(struct rpc_xprt *xprt, struct rpc_rqst *req); static inline int xprt_enable_swap(struct rpc_xprt *xprt) diff --git a/include/linux/surface_aggregator/device.h b/include/linux/surface_aggregator/device.h index 4441ad667c3f..6ff9c58b3e17 100644 --- a/include/linux/surface_aggregator/device.h +++ b/include/linux/surface_aggregator/device.h @@ -98,9 +98,9 @@ struct ssam_device_uid { | (((fun) != SSAM_ANY_FUN) ? SSAM_MATCH_FUNCTION : 0), \ .domain = d, \ .category = cat, \ - .target = ((tid) != SSAM_ANY_TID) ? (tid) : 0, \ - .instance = ((iid) != SSAM_ANY_IID) ? (iid) : 0, \ - .function = ((fun) != SSAM_ANY_FUN) ? (fun) : 0 \ + .target = __builtin_choose_expr((tid) != SSAM_ANY_TID, (tid), 0), \ + .instance = __builtin_choose_expr((iid) != SSAM_ANY_IID, (iid), 0), \ + .function = __builtin_choose_expr((fun) != SSAM_ANY_FUN, (fun), 0) /** * SSAM_VDEV() - Initialize a &struct ssam_device_id as virtual device with |