diff options
Diffstat (limited to 'include/net')
| -rw-r--r-- | include/net/cfg80211.h | 48 | ||||
| -rw-r--r-- | include/net/dropreason.h | 6 | ||||
| -rw-r--r-- | include/net/mac80211.h | 38 |
3 files changed, 60 insertions, 32 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 363d7dd2255a..6b170a8d086c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2045,9 +2045,6 @@ struct cfg80211_tid_stats { * @assoc_at: bootime (ns) of the last association * @rx_bytes: bytes (size of MPDUs) received from this station * @tx_bytes: bytes (size of MPDUs) transmitted to this station - * @llid: mesh local link id - * @plid: mesh peer link id - * @plink_state: mesh peer link state * @signal: The signal strength, type depends on the wiphy's signal_type. * For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. * @signal_avg: Average signal strength, type depends on the wiphy's signal_type. @@ -2067,14 +2064,20 @@ struct cfg80211_tid_stats { * This number should increase every time the list of stations * changes, i.e. when a station is added or removed, so that * userspace can tell whether it got a consistent snapshot. + * @beacon_loss_count: Number of times beacon loss event has triggered. * @assoc_req_ies: IEs from (Re)Association Request. * This is used only when in AP mode with drivers that do not use * user space MLME/SME implementation. The information is provided for * the cfg80211_new_sta() calls to notify user space of the IEs. * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets. * @sta_flags: station flags mask & values - * @beacon_loss_count: Number of times beacon loss event has triggered. * @t_offset: Time offset of the station relative to this host. + * @llid: mesh local link id + * @plid: mesh peer link id + * @plink_state: mesh peer link state + * @connected_to_gate: true if mesh STA has a path to mesh gate + * @connected_to_as: true if mesh STA has a path to authentication server + * @airtime_link_metric: mesh airtime link metric. * @local_pm: local mesh STA power save mode * @peer_pm: peer mesh STA power save mode * @nonpeer_pm: non-peer mesh STA power save mode @@ -2083,7 +2086,6 @@ struct cfg80211_tid_stats { * @rx_beacon: number of beacons received from this peer * @rx_beacon_signal_avg: signal strength average (in dBm) for beacons received * from this peer - * @connected_to_gate: true if mesh STA has a path to mesh gate * @rx_duration: aggregate PPDU duration(usecs) for all the frames from a peer * @tx_duration: aggregate PPDU duration(usecs) for all the frames to a peer * @airtime_weight: current airtime scheduling weight @@ -2097,8 +2099,6 @@ struct cfg80211_tid_stats { * @fcs_err_count: number of packets (MPDUs) received from this station with * an FCS error. This counter should be incremented only when TA of the * received packet with an FCS error matches the peer MAC address. - * @airtime_link_metric: mesh airtime link metric. - * @connected_to_as: true if mesh STA has a path to authentication server * @mlo_params_valid: Indicates @assoc_link_id and @mld_addr fields are filled * by driver. Drivers use this only in cfg80211_new_sta() calls when AP * MLD's MLME/SME is offload to driver. Drivers won't fill this @@ -2125,9 +2125,6 @@ struct station_info { u64 assoc_at; u64 rx_bytes; u64 tx_bytes; - u16 llid; - u16 plid; - u8 plink_state; s8 signal; s8 signal_avg; @@ -2147,36 +2144,38 @@ struct station_info { int generation; + u32 beacon_loss_count; + const u8 *assoc_req_ies; size_t assoc_req_ies_len; - u32 beacon_loss_count; s64 t_offset; + u16 llid; + u16 plid; + u8 plink_state; + u8 connected_to_gate; + u8 connected_to_as; + u32 airtime_link_metric; enum nl80211_mesh_power_mode local_pm; enum nl80211_mesh_power_mode peer_pm; enum nl80211_mesh_power_mode nonpeer_pm; u32 expected_throughput; - u64 tx_duration; - u64 rx_duration; - u64 rx_beacon; - u8 rx_beacon_signal_avg; - u8 connected_to_gate; + u16 airtime_weight; - struct cfg80211_tid_stats *pertid; s8 ack_signal; s8 avg_ack_signal; + struct cfg80211_tid_stats *pertid; - u16 airtime_weight; + u64 tx_duration; + u64 rx_duration; + u64 rx_beacon; + u8 rx_beacon_signal_avg; u32 rx_mpdu_count; u32 fcs_err_count; - u32 airtime_link_metric; - - u8 connected_to_as; - bool mlo_params_valid; u8 assoc_link_id; u8 mld_addr[ETH_ALEN] __aligned(2); @@ -2265,7 +2264,7 @@ static inline int cfg80211_get_station(struct net_device *dev, * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP * @MONITOR_FLAG_CONTROL: pass control frames * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering - * @MONITOR_FLAG_COOK_FRAMES: report frames after processing + * @MONITOR_FLAG_COOK_FRAMES: deprecated, will unconditionally be refused * @MONITOR_FLAG_ACTIVE: active monitor, ACKs frames on its MAC address * @MONITOR_FLAG_SKIP_TX: do not pass locally transmitted frames */ @@ -2947,6 +2946,7 @@ struct cfg80211_bss_ies { * @nontrans_list: list of non-transmitted BSS, if this is a transmitted one * (multi-BSSID support) * @signal: signal strength value (type depends on the wiphy's signal_type) + * @ts_boottime: timestamp of the last BSS update in nanoseconds since boot * @chains: bitmask for filled values in @chain_signal. * @chain_signal: per-chain signal strength of last received BSS in dBm. * @bssid_index: index in the multiple BSS set @@ -2971,6 +2971,8 @@ struct cfg80211_bss { s32 signal; + u64 ts_boottime; + u16 beacon_interval; u16 capability; diff --git a/include/net/dropreason.h b/include/net/dropreason.h index 56cb7be92244..7d3b1a2a6fec 100644 --- a/include/net/dropreason.h +++ b/include/net/dropreason.h @@ -18,12 +18,6 @@ enum skb_drop_reason_subsys { SKB_DROP_REASON_SUBSYS_MAC80211_UNUSABLE, /** - * @SKB_DROP_REASON_SUBSYS_MAC80211_MONITOR: mac80211 drop reasons - * for frames still going to monitor, see net/mac80211/drop.h - */ - SKB_DROP_REASON_SUBSYS_MAC80211_MONITOR, - - /** * @SKB_DROP_REASON_SUBSYS_OPENVSWITCH: openvswitch drop reasons, * see net/openvswitch/drop.h */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index c3ed2fcff8b7..c498f685d01f 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -7,7 +7,7 @@ * Copyright 2007-2010 Johannes Berg <johannes@sipsolutions.net> * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2015 - 2017 Intel Deutschland GmbH - * Copyright (C) 2018 - 2024 Intel Corporation + * Copyright (C) 2018 - 2025 Intel Corporation */ #ifndef MAC80211_H @@ -702,6 +702,7 @@ struct ieee80211_parsed_tpe { * @tpe: transmit power envelope information * @pwr_reduction: power constraint of BSS. * @eht_support: does this BSS support EHT + * @epcs_support: does this BSS support EPCS * @csa_active: marks whether a channel switch is going on. * @mu_mimo_owner: indicates interface owns MU-MIMO capability * @chanctx_conf: The channel context this interface is assigned to, or %NULL @@ -823,7 +824,7 @@ struct ieee80211_bss_conf { u8 pwr_reduction; bool eht_support; - + bool epcs_support; bool csa_active; bool mu_mimo_owner; @@ -2851,6 +2852,11 @@ struct ieee80211_txq { * implements MLO, so operation can continue on other links when one * link is switching. * + * @IEEE80211_HW_STRICT: strictly enforce certain things mandated by the spec + * but otherwise ignored/worked around for interoperability. This is a + * HW flag so drivers can opt in according to their own control, e.g. in + * testing. + * * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays */ enum ieee80211_hw_flags { @@ -2911,6 +2917,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_DISALLOW_PUNCTURING, IEEE80211_HW_DISALLOW_PUNCTURING_5GHZ, IEEE80211_HW_HANDLES_QUIET_CSA, + IEEE80211_HW_STRICT, /* keep last, obviously */ NUM_IEEE80211_HW_FLAGS @@ -3823,7 +3830,7 @@ enum ieee80211_reconfig_type { * @was_assoc: set if this call is due to deauth/disassoc * while just having been associated * @link_id: the link id on which the frame will be TX'ed. - * Only used with the mgd_prepare_tx() method. + * 0 for a non-MLO connection. */ struct ieee80211_prep_tx_info { u16 duration; @@ -6665,6 +6672,31 @@ void ieee80211_iter_chan_contexts_atomic( void *iter_data); /** + * ieee80211_iter_chan_contexts_mtx - iterate channel contexts + * @hw: pointer obtained from ieee80211_alloc_hw(). + * @iter: iterator function + * @iter_data: data passed to iterator function + * + * Iterate all active channel contexts. This function can only be used while + * holding the wiphy mutex. + * + * The iterator will not find a context that's being added (during + * the driver callback to add it) but will find it while it's being + * removed. + * + * Note that during hardware restart, all contexts that existed + * before the restart are considered already present so will be + * found while iterating, whether they've been re-added already + * or not. + */ +void ieee80211_iter_chan_contexts_mtx( + struct ieee80211_hw *hw, + void (*iter)(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *chanctx_conf, + void *data), + void *iter_data); + +/** * ieee80211_ap_probereq_get - retrieve a Probe Request template * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from the add_interface callback. |