diff options
Diffstat (limited to 'include/uapi/linux/bpf.h')
| -rw-r--r-- | include/uapi/linux/bpf.h | 194 |
1 files changed, 188 insertions, 6 deletions
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 66917a4eba27..72c453a8bf50 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -103,6 +103,7 @@ enum bpf_cmd { BPF_BTF_LOAD, BPF_BTF_GET_FD_BY_ID, BPF_TASK_FD_QUERY, + BPF_MAP_LOOKUP_AND_DELETE_ELEM, }; enum bpf_map_type { @@ -127,6 +128,9 @@ enum bpf_map_type { BPF_MAP_TYPE_SOCKHASH, BPF_MAP_TYPE_CGROUP_STORAGE, BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, + BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE, + BPF_MAP_TYPE_QUEUE, + BPF_MAP_TYPE_STACK, }; enum bpf_prog_type { @@ -152,6 +156,7 @@ enum bpf_prog_type { BPF_PROG_TYPE_LWT_SEG6LOCAL, BPF_PROG_TYPE_LIRC_MODE2, BPF_PROG_TYPE_SK_REUSEPORT, + BPF_PROG_TYPE_FLOW_DISSECTOR, }; enum bpf_attach_type { @@ -172,6 +177,7 @@ enum bpf_attach_type { BPF_CGROUP_UDP4_SENDMSG, BPF_CGROUP_UDP6_SENDMSG, BPF_LIRC_MODE2, + BPF_FLOW_DISSECTOR, __MAX_BPF_ATTACH_TYPE }; @@ -459,6 +465,28 @@ union bpf_attr { * Return * 0 on success, or a negative error in case of failure. * + * int bpf_map_push_elem(struct bpf_map *map, const void *value, u64 flags) + * Description + * Push an element *value* in *map*. *flags* is one of: + * + * **BPF_EXIST** + * If the queue/stack is full, the oldest element is removed to + * make room for this. + * Return + * 0 on success, or a negative error in case of failure. + * + * int bpf_map_pop_elem(struct bpf_map *map, void *value) + * Description + * Pop an element from *map*. + * Return + * 0 on success, or a negative error in case of failure. + * + * int bpf_map_peek_elem(struct bpf_map *map, void *value) + * Description + * Get an element from *map* without removing it. + * Return + * 0 on success, or a negative error in case of failure. + * * int bpf_probe_read(void *dst, u32 size, const void *src) * Description * For tracing programs, safely attempt to read *size* bytes from @@ -1430,7 +1458,7 @@ union bpf_attr { * Return * 0 on success, or a negative error in case of failure. * - * int bpf_skb_adjust_room(struct sk_buff *skb, u32 len_diff, u32 mode, u64 flags) + * int bpf_skb_adjust_room(struct sk_buff *skb, s32 len_diff, u32 mode, u64 flags) * Description * Grow or shrink the room for data in the packet associated to * *skb* by *len_diff*, and according to the selected *mode*. @@ -2141,6 +2169,102 @@ union bpf_attr { * request in the skb. * Return * 0 on success, or a negative error in case of failure. + * + * struct bpf_sock *bpf_sk_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) + * Description + * Look for TCP socket matching *tuple*, optionally in a child + * network namespace *netns*. The return value must be checked, + * and if non-NULL, released via **bpf_sk_release**\ (). + * + * The *ctx* should point to the context of the program, such as + * the skb or socket (depending on the hook in use). This is used + * to determine the base network namespace for the lookup. + * + * *tuple_size* must be one of: + * + * **sizeof**\ (*tuple*\ **->ipv4**) + * Look for an IPv4 socket. + * **sizeof**\ (*tuple*\ **->ipv6**) + * Look for an IPv6 socket. + * + * If the *netns* is a negative signed 32-bit integer, then the + * socket lookup table in the netns associated with the *ctx* will + * will be used. For the TC hooks, this is the netns of the device + * in the skb. For socket hooks, this is the netns of the socket. + * If *netns* is any other signed 32-bit value greater than or + * equal to zero then it specifies the ID of the netns relative to + * the netns associated with the *ctx*. *netns* values beyond the + * range of 32-bit integers are reserved for future use. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_NET** configuration option. + * Return + * Pointer to *struct bpf_sock*, or NULL in case of failure. + * For sockets with reuseport option, the *struct bpf_sock* + * result is from reuse->socks[] using the hash of the tuple. + * + * struct bpf_sock *bpf_sk_lookup_udp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) + * Description + * Look for UDP socket matching *tuple*, optionally in a child + * network namespace *netns*. The return value must be checked, + * and if non-NULL, released via **bpf_sk_release**\ (). + * + * The *ctx* should point to the context of the program, such as + * the skb or socket (depending on the hook in use). This is used + * to determine the base network namespace for the lookup. + * + * *tuple_size* must be one of: + * + * **sizeof**\ (*tuple*\ **->ipv4**) + * Look for an IPv4 socket. + * **sizeof**\ (*tuple*\ **->ipv6**) + * Look for an IPv6 socket. + * + * If the *netns* is a negative signed 32-bit integer, then the + * socket lookup table in the netns associated with the *ctx* will + * will be used. For the TC hooks, this is the netns of the device + * in the skb. For socket hooks, this is the netns of the socket. + * If *netns* is any other signed 32-bit value greater than or + * equal to zero then it specifies the ID of the netns relative to + * the netns associated with the *ctx*. *netns* values beyond the + * range of 32-bit integers are reserved for future use. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_NET** configuration option. + * Return + * Pointer to *struct bpf_sock*, or NULL in case of failure. + * For sockets with reuseport option, the *struct bpf_sock* + * result is from reuse->socks[] using the hash of the tuple. + * + * int bpf_sk_release(struct bpf_sock *sk) + * Description + * Release the reference held by *sock*. *sock* must be a non-NULL + * pointer that was returned from bpf_sk_lookup_xxx\ (). + * Return + * 0 on success, or a negative error in case of failure. + * + * int bpf_msg_push_data(struct sk_buff *skb, u32 start, u32 len, u64 flags) + * Description + * For socket policies, insert *len* bytes into msg at offset + * *start*. + * + * If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a + * *msg* it may want to insert metadata or options into the msg. + * This can later be read and used by any of the lower layer BPF + * hooks. + * + * This helper may fail if under memory pressure (a malloc + * fails) in these cases BPF programs will get an appropriate + * error and BPF programs will need to handle them. + * + * Return + * 0 on success, or a negative error in case of failure. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -2226,7 +2350,14 @@ union bpf_attr { FN(get_current_cgroup_id), \ FN(get_local_storage), \ FN(sk_select_reuseport), \ - FN(skb_ancestor_cgroup_id), + FN(skb_ancestor_cgroup_id), \ + FN(sk_lookup_tcp), \ + FN(sk_lookup_udp), \ + FN(sk_release), \ + FN(map_push_elem), \ + FN(map_pop_elem), \ + FN(map_peek_elem), \ + FN(msg_push_data), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call @@ -2282,6 +2413,9 @@ enum bpf_func_id { /* BPF_FUNC_perf_event_output for sk_buff input context. */ #define BPF_F_CTXLEN_MASK (0xfffffULL << 32) +/* Current network namespace */ +#define BPF_F_CURRENT_NETNS (-1L) + /* Mode for BPF_FUNC_skb_adjust_room helper. */ enum bpf_adj_room_mode { BPF_ADJ_ROOM_NET, @@ -2299,6 +2433,12 @@ enum bpf_lwt_encap_mode { BPF_LWT_ENCAP_SEG6_INLINE }; +#define __bpf_md_ptr(type, name) \ +union { \ + type name; \ + __u64 :64; \ +} __attribute__((aligned(8))) + /* user accessible mirror of in-kernel sk_buff. * new fields can only be added to the end of this structure */ @@ -2333,6 +2473,7 @@ struct __sk_buff { /* ... here. */ __u32 data_meta; + __bpf_md_ptr(struct bpf_flow_keys *, flow_keys); }; struct bpf_tunnel_key { @@ -2395,6 +2536,23 @@ struct bpf_sock { */ }; +struct bpf_sock_tuple { + union { + struct { + __be32 saddr; + __be32 daddr; + __be16 sport; + __be16 dport; + } ipv4; + struct { + __be32 saddr[4]; + __be32 daddr[4]; + __be16 sport; + __be16 dport; + } ipv6; + }; +}; + #define XDP_PACKET_HEADROOM 256 /* User return codes for XDP prog type. @@ -2431,8 +2589,8 @@ enum sk_action { * be added to the end of this structure */ struct sk_msg_md { - void *data; - void *data_end; + __bpf_md_ptr(void *, data); + __bpf_md_ptr(void *, data_end); __u32 family; __u32 remote_ip4; /* Stored in network byte order */ @@ -2448,8 +2606,9 @@ struct sk_reuseport_md { * Start of directly accessible data. It begins from * the tcp/udp header. */ - void *data; - void *data_end; /* End of directly accessible data */ + __bpf_md_ptr(void *, data); + /* End of directly accessible data */ + __bpf_md_ptr(void *, data_end); /* * Total length of packet (starting from the tcp/udp header). * Note that the directly accessible bytes (data_end - data) @@ -2778,4 +2937,27 @@ enum bpf_task_fd_type { BPF_FD_TYPE_URETPROBE, /* filename + offset */ }; +struct bpf_flow_keys { + __u16 nhoff; + __u16 thoff; + __u16 addr_proto; /* ETH_P_* of valid addrs */ + __u8 is_frag; + __u8 is_first_frag; + __u8 is_encap; + __u8 ip_proto; + __be16 n_proto; + __be16 sport; + __be16 dport; + union { + struct { + __be32 ipv4_src; + __be32 ipv4_dst; + }; + struct { + __u32 ipv6_src[4]; /* in6_addr; network order */ + __u32 ipv6_dst[4]; /* in6_addr; network order */ + }; + }; +}; + #endif /* _UAPI__LINUX_BPF_H__ */ |