diff options
Diffstat (limited to 'include/uapi/linux/drbd_limits.h')
| -rw-r--r-- | include/uapi/linux/drbd_limits.h | 251 |
1 files changed, 251 insertions, 0 deletions
diff --git a/include/uapi/linux/drbd_limits.h b/include/uapi/linux/drbd_limits.h new file mode 100644 index 000000000000..acefe84bc602 --- /dev/null +++ b/include/uapi/linux/drbd_limits.h @@ -0,0 +1,251 @@ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ +/* + drbd_limits.h + This file is part of DRBD by Philipp Reisner and Lars Ellenberg. +*/ + +/* + * Our current limitations. + * Some of them are hard limits, + * some of them are arbitrary range limits, that make it easier to provide + * feedback about nonsense settings for certain configurable values. + */ + +#ifndef _UAPI_LINUX_DRBD_LIMITS_H +#define _UAPI_LINUX_DRBD_LIMITS_H + +#include <linux/drbd.h> + +#define DRBD_MINOR_COUNT_MIN 1U +#define DRBD_MINOR_COUNT_MAX 255U +#define DRBD_MINOR_COUNT_DEF 32U +#define DRBD_MINOR_COUNT_SCALE '1' + +#define DRBD_VOLUME_MAX 65534U + +#define DRBD_DIALOG_REFRESH_MIN 0U +#define DRBD_DIALOG_REFRESH_MAX 600U +#define DRBD_DIALOG_REFRESH_SCALE '1' + +/* valid port number */ +#define DRBD_PORT_MIN 1U +#define DRBD_PORT_MAX 0xffffU +#define DRBD_PORT_SCALE '1' + +/* startup { */ + /* if you want more than 3.4 days, disable */ +#define DRBD_WFC_TIMEOUT_MIN 0U +#define DRBD_WFC_TIMEOUT_MAX 300000U +#define DRBD_WFC_TIMEOUT_DEF 0U +#define DRBD_WFC_TIMEOUT_SCALE '1' + +#define DRBD_DEGR_WFC_TIMEOUT_MIN 0U +#define DRBD_DEGR_WFC_TIMEOUT_MAX 300000U +#define DRBD_DEGR_WFC_TIMEOUT_DEF 0U +#define DRBD_DEGR_WFC_TIMEOUT_SCALE '1' + +#define DRBD_OUTDATED_WFC_TIMEOUT_MIN 0U +#define DRBD_OUTDATED_WFC_TIMEOUT_MAX 300000U +#define DRBD_OUTDATED_WFC_TIMEOUT_DEF 0U +#define DRBD_OUTDATED_WFC_TIMEOUT_SCALE '1' +/* }*/ + +/* net { */ + /* timeout, unit centi seconds + * more than one minute timeout is not useful */ +#define DRBD_TIMEOUT_MIN 1U +#define DRBD_TIMEOUT_MAX 600U +#define DRBD_TIMEOUT_DEF 60U /* 6 seconds */ +#define DRBD_TIMEOUT_SCALE '1' + + /* If backing disk takes longer than disk_timeout, mark the disk as failed */ +#define DRBD_DISK_TIMEOUT_MIN 0U /* 0 = disabled */ +#define DRBD_DISK_TIMEOUT_MAX 6000U /* 10 Minutes */ +#define DRBD_DISK_TIMEOUT_DEF 0U /* disabled */ +#define DRBD_DISK_TIMEOUT_SCALE '1' + + /* active connection retries when C_WF_CONNECTION */ +#define DRBD_CONNECT_INT_MIN 1U +#define DRBD_CONNECT_INT_MAX 120U +#define DRBD_CONNECT_INT_DEF 10U /* seconds */ +#define DRBD_CONNECT_INT_SCALE '1' + + /* keep-alive probes when idle */ +#define DRBD_PING_INT_MIN 1U +#define DRBD_PING_INT_MAX 120U +#define DRBD_PING_INT_DEF 10U +#define DRBD_PING_INT_SCALE '1' + + /* timeout for the ping packets.*/ +#define DRBD_PING_TIMEO_MIN 1U +#define DRBD_PING_TIMEO_MAX 300U +#define DRBD_PING_TIMEO_DEF 5U +#define DRBD_PING_TIMEO_SCALE '1' + + /* max number of write requests between write barriers */ +#define DRBD_MAX_EPOCH_SIZE_MIN 1U +#define DRBD_MAX_EPOCH_SIZE_MAX 20000U +#define DRBD_MAX_EPOCH_SIZE_DEF 2048U +#define DRBD_MAX_EPOCH_SIZE_SCALE '1' + + /* I don't think that a tcp send buffer of more than 10M is useful */ +#define DRBD_SNDBUF_SIZE_MIN 0U +#define DRBD_SNDBUF_SIZE_MAX (10U<<20) +#define DRBD_SNDBUF_SIZE_DEF 0U +#define DRBD_SNDBUF_SIZE_SCALE '1' + +#define DRBD_RCVBUF_SIZE_MIN 0U +#define DRBD_RCVBUF_SIZE_MAX (10U<<20) +#define DRBD_RCVBUF_SIZE_DEF 0U +#define DRBD_RCVBUF_SIZE_SCALE '1' + + /* @4k PageSize -> 128kB - 512MB */ +#define DRBD_MAX_BUFFERS_MIN 32U +#define DRBD_MAX_BUFFERS_MAX 131072U +#define DRBD_MAX_BUFFERS_DEF 2048U +#define DRBD_MAX_BUFFERS_SCALE '1' + + /* @4k PageSize -> 4kB - 512MB */ +#define DRBD_UNPLUG_WATERMARK_MIN 1U +#define DRBD_UNPLUG_WATERMARK_MAX 131072U +#define DRBD_UNPLUG_WATERMARK_DEF (DRBD_MAX_BUFFERS_DEF/16) +#define DRBD_UNPLUG_WATERMARK_SCALE '1' + + /* 0 is disabled. + * 200 should be more than enough even for very short timeouts */ +#define DRBD_KO_COUNT_MIN 0U +#define DRBD_KO_COUNT_MAX 200U +#define DRBD_KO_COUNT_DEF 7U +#define DRBD_KO_COUNT_SCALE '1' +/* } */ + +/* syncer { */ + /* FIXME allow rate to be zero? */ +#define DRBD_RESYNC_RATE_MIN 1U +/* channel bonding 10 GbE, or other hardware */ +#define DRBD_RESYNC_RATE_MAX (4 << 20) +#define DRBD_RESYNC_RATE_DEF 250U +#define DRBD_RESYNC_RATE_SCALE 'k' /* kilobytes */ + +#define DRBD_AL_EXTENTS_MIN 67U + /* we use u16 as "slot number", (u16)~0 is "FREE". + * If you use >= 292 kB on-disk ring buffer, + * this is the maximum you can use: */ +#define DRBD_AL_EXTENTS_MAX 0xfffeU +#define DRBD_AL_EXTENTS_DEF 1237U +#define DRBD_AL_EXTENTS_SCALE '1' + +#define DRBD_MINOR_NUMBER_MIN -1 +#define DRBD_MINOR_NUMBER_MAX ((1 << 20) - 1) +#define DRBD_MINOR_NUMBER_DEF -1 +#define DRBD_MINOR_NUMBER_SCALE '1' + +/* } */ + +/* drbdsetup XY resize -d Z + * you are free to reduce the device size to nothing, if you want to. + * the upper limit with 64bit kernel, enough ram and flexible meta data + * is 1 PiB, currently. */ +/* DRBD_MAX_SECTORS */ +#define DRBD_DISK_SIZE_MIN 0LLU +#define DRBD_DISK_SIZE_MAX (1LLU * (2LLU << 40)) +#define DRBD_DISK_SIZE_DEF 0LLU /* = disabled = no user size... */ +#define DRBD_DISK_SIZE_SCALE 's' /* sectors */ + +#define DRBD_ON_IO_ERROR_DEF EP_DETACH +#define DRBD_FENCING_DEF FP_DONT_CARE +#define DRBD_AFTER_SB_0P_DEF ASB_DISCONNECT +#define DRBD_AFTER_SB_1P_DEF ASB_DISCONNECT +#define DRBD_AFTER_SB_2P_DEF ASB_DISCONNECT +#define DRBD_RR_CONFLICT_DEF ASB_DISCONNECT +#define DRBD_ON_NO_DATA_DEF OND_IO_ERROR +#define DRBD_ON_CONGESTION_DEF OC_BLOCK +#define DRBD_READ_BALANCING_DEF RB_PREFER_LOCAL + +#define DRBD_MAX_BIO_BVECS_MIN 0U +#define DRBD_MAX_BIO_BVECS_MAX 128U +#define DRBD_MAX_BIO_BVECS_DEF 0U +#define DRBD_MAX_BIO_BVECS_SCALE '1' + +#define DRBD_C_PLAN_AHEAD_MIN 0U +#define DRBD_C_PLAN_AHEAD_MAX 300U +#define DRBD_C_PLAN_AHEAD_DEF 20U +#define DRBD_C_PLAN_AHEAD_SCALE '1' + +#define DRBD_C_DELAY_TARGET_MIN 1U +#define DRBD_C_DELAY_TARGET_MAX 100U +#define DRBD_C_DELAY_TARGET_DEF 10U +#define DRBD_C_DELAY_TARGET_SCALE '1' + +#define DRBD_C_FILL_TARGET_MIN 0U +#define DRBD_C_FILL_TARGET_MAX (1U<<20) /* 500MByte in sec */ +#define DRBD_C_FILL_TARGET_DEF 100U /* Try to place 50KiB in socket send buffer during resync */ +#define DRBD_C_FILL_TARGET_SCALE 's' /* sectors */ + +#define DRBD_C_MAX_RATE_MIN 250U +#define DRBD_C_MAX_RATE_MAX (4U << 20) +#define DRBD_C_MAX_RATE_DEF 102400U +#define DRBD_C_MAX_RATE_SCALE 'k' /* kilobytes */ + +#define DRBD_C_MIN_RATE_MIN 0U +#define DRBD_C_MIN_RATE_MAX (4U << 20) +#define DRBD_C_MIN_RATE_DEF 250U +#define DRBD_C_MIN_RATE_SCALE 'k' /* kilobytes */ + +#define DRBD_CONG_FILL_MIN 0U +#define DRBD_CONG_FILL_MAX (10U<<21) /* 10GByte in sectors */ +#define DRBD_CONG_FILL_DEF 0U +#define DRBD_CONG_FILL_SCALE 's' /* sectors */ + +#define DRBD_CONG_EXTENTS_MIN DRBD_AL_EXTENTS_MIN +#define DRBD_CONG_EXTENTS_MAX DRBD_AL_EXTENTS_MAX +#define DRBD_CONG_EXTENTS_DEF DRBD_AL_EXTENTS_DEF +#define DRBD_CONG_EXTENTS_SCALE DRBD_AL_EXTENTS_SCALE + +#define DRBD_PROTOCOL_DEF DRBD_PROT_C + +#define DRBD_DISK_BARRIER_DEF 0U +#define DRBD_DISK_FLUSHES_DEF 1U +#define DRBD_DISK_DRAIN_DEF 1U +#define DRBD_MD_FLUSHES_DEF 1U +#define DRBD_TCP_CORK_DEF 1U +#define DRBD_AL_UPDATES_DEF 1U + +/* We used to ignore the discard_zeroes_data setting. + * To not change established (and expected) behaviour, + * by default assume that, for discard_zeroes_data=0, + * we can make that an effective discard_zeroes_data=1, + * if we only explicitly zero-out unaligned partial chunks. */ +#define DRBD_DISCARD_ZEROES_IF_ALIGNED_DEF 1U + +/* Some backends pretend to support WRITE SAME, + * but fail such requests when they are actually submitted. + * This is to tell DRBD to not even try. */ +#define DRBD_DISABLE_WRITE_SAME_DEF 0U + +#define DRBD_ALLOW_TWO_PRIMARIES_DEF 0U +#define DRBD_ALWAYS_ASBP_DEF 0U +#define DRBD_USE_RLE_DEF 1U +#define DRBD_CSUMS_AFTER_CRASH_ONLY_DEF 0U + +#define DRBD_AL_STRIPES_MIN 1U +#define DRBD_AL_STRIPES_MAX 1024U +#define DRBD_AL_STRIPES_DEF 1U +#define DRBD_AL_STRIPES_SCALE '1' + +#define DRBD_AL_STRIPE_SIZE_MIN 4U +#define DRBD_AL_STRIPE_SIZE_MAX 16777216U +#define DRBD_AL_STRIPE_SIZE_DEF 32U +#define DRBD_AL_STRIPE_SIZE_SCALE 'k' /* kilobytes */ + +#define DRBD_SOCKET_CHECK_TIMEO_MIN 0U +#define DRBD_SOCKET_CHECK_TIMEO_MAX DRBD_PING_TIMEO_MAX +#define DRBD_SOCKET_CHECK_TIMEO_DEF 0U +#define DRBD_SOCKET_CHECK_TIMEO_SCALE '1' + +#define DRBD_RS_DISCARD_GRANULARITY_MIN 0U +#define DRBD_RS_DISCARD_GRANULARITY_MAX (1U<<20) /* 1MiByte */ +#define DRBD_RS_DISCARD_GRANULARITY_DEF 0U /* disabled by default */ +#define DRBD_RS_DISCARD_GRANULARITY_SCALE '1' /* bytes */ + +#endif /* _UAPI_LINUX_DRBD_LIMITS_H */ |