diff options
Diffstat (limited to 'include/uapi/linux/nl80211.h')
| -rw-r--r-- | include/uapi/linux/nl80211.h | 728 |
1 files changed, 699 insertions, 29 deletions
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 8433bac48112..020387d76412 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -11,7 +11,7 @@ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> * Copyright 2008 Colin McCabe <colin@cozybit.com> * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2025 Intel Corporation + * Copyright (C) 2018-2026 Intel Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -729,7 +729,9 @@ * to remain on the channel. This command is also used as an event to * notify when the requested duration starts (it may take a while for the * driver to schedule this time due to other concurrent needs for the - * radio). + * radio). An optional attribute %NL80211_ATTR_MAC can be used to filter + * incoming frames during remain-on-channel, such that frames + * addressed to the specified destination MAC are reported. * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE) * that will be included with any events pertaining to this request; * the cookie is also used to cancel the request. @@ -906,8 +908,9 @@ * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP * (or GO) interface (i.e. hostapd) to ask for unexpected frames to * implement sending deauth to stations that send unexpected class 3 - * frames. Also used as the event sent by the kernel when such a frame - * is received. + * frames. For NAN_DATA interfaces, this is used to report frames from + * unknown peers (A2 not assigned to any active NDP). + * Also used as the event sent by the kernel when such a frame is received. * For the event, the %NL80211_ATTR_MAC attribute carries the TA and * other attributes like the interface index are present. * If used as the command it must have an interface index and you can @@ -919,13 +922,15 @@ * and wasn't already in a 4-addr VLAN. The event will be sent similarly * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener. * - * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface - * by sending a null data frame to it and reporting when the frame is - * acknowledged. This is used to allow timing out inactive clients. Uses - * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a - * direct reply with an %NL80211_ATTR_COOKIE that is later used to match - * up the event with the request. The event includes the same data and - * has %NL80211_ATTR_ACK set if the frame was ACKed. + * @NL80211_CMD_PROBE_PEER: Probe a connected peer by sending a null data + * frame and reporting when the frame is acknowledged. + * In AP/GO mode, %NL80211_ATTR_MAC is required to identify the client. + * In STA/P2P-client mode, %NL80211_ATTR_MAC must be omitted (the AP is + * implied); the driver must advertise %NL80211_EXT_FEATURE_PROBE_AP. + * The command returns a direct reply with an %NL80211_ATTR_COOKIE that + * is later used to match up the event with the request. The event + * includes the same data and has %NL80211_ATTR_ACK set if the frame + * was ACKed. * * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from * other BSSes when any interfaces are in AP mode. This helps implement @@ -1203,10 +1208,12 @@ * user space through the connect result as the user space would have * initiated the connection through the connect request. * - * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's - * ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE, - * %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its - * address(specified in %NL80211_ATTR_MAC). + * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notifies that a station's + * HT opmode or VHT opmode changed using any of %NL80211_ATTR_SMPS_MODE, + * %NL80211_ATTR_CHANNEL_WIDTH, %NL80211_ATTR_NSS attributes with its + * address (specified in %NL80211_ATTR_MAC). + * Note that 80+80 and 160 MHz might not be differentiated, i.e. may + * report %NL80211_CHAN_WIDTH_160 instead of %NL80211_CHAN_WIDTH_80P80. * * @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in * the %NL80211_ATTR_FTM_RESPONDER_STATS attribute. @@ -1361,6 +1368,65 @@ * user space that the NAN new cluster has been joined. The cluster ID is * indicated by %NL80211_ATTR_MAC. * + * @NL80211_CMD_INCUMBENT_SIGNAL_DETECT: Once any incumbent signal is detected + * on the operating channel in 6 GHz band, userspace is notified with the + * signal interference bitmap using + * %NL80211_ATTR_INCUMBENT_SIGNAL_INTERFERENCE_BITMAP. The current channel + * definition is also sent. + * + * @NL80211_CMD_NAN_SET_LOCAL_SCHED: Set the local NAN schedule. NAN must be + * operational (%NL80211_CMD_START_NAN was executed). Must contain + * %NL80211_ATTR_NAN_TIME_SLOTS and %NL80211_ATTR_NAN_AVAIL_BLOB, but + * %NL80211_ATTR_NAN_CHANNEL is optional (for example in case of a channel + * removal, that channel won't be provided). + * If %NL80211_ATTR_NAN_SCHED_DEFERRED is set, the command is a request + * from the device to perform an announced schedule update. See + * %NL80211_ATTR_NAN_SCHED_DEFERRED for more details. + * If not set, the schedule should be applied immediately. + * @NL80211_CMD_NAN_SCHED_UPDATE_DONE: Event sent to user space to notify that + * a deferred local NAN schedule update (requested with + * %NL80211_CMD_NAN_SET_LOCAL_SCHED and %NL80211_ATTR_NAN_SCHED_DEFERRED) + * has been completed. The presence of %NL80211_ATTR_NAN_SCHED_UPDATE_SUCCESS + * indicates that the update was successful. + * @NL80211_CMD_NAN_SET_PEER_SCHED: Set the peer NAN schedule. NAN + * must be operational (%NL80211_CMD_START_NAN was executed). + * Required attributes: %NL80211_ATTR_MAC (peer NMI address) and + * %NL80211_ATTR_NAN_COMMITTED_DW. + * Optionally, the full schedule can be provided by including all of: + * %NL80211_ATTR_NAN_SEQ_ID, %NL80211_ATTR_NAN_CHANNEL (one or more), and + * %NL80211_ATTR_NAN_PEER_MAPS (see &enum nl80211_nan_peer_map_attrs). + * If any of these three optional attributes is provided, all three must + * be provided. + * Each peer channel must be compatible with at least one local channel + * set by %NL80211_CMD_SET_LOCAL_NAN_SCHED. Different maps must not + * contain compatible channels. + * For single-radio devices (n_radio <= 1), different maps must not + * schedule the same time slot, as the device cannot operate on multiple + * channels simultaneously. + * When updating an existing peer schedule, the full new schedule must be + * provided - partial updates are not supported. The new schedule will + * completely replace the previous one. + * The peer schedule is automatically removed when the NMI station is + * removed. + * @NL80211_CMD_NAN_ULW_UPDATE: Notification from the driver to user space + * with the updated ULW blob of the device. User space can use this blob + * to attach to frames sent to peers. This notification contains + * %NL80211_ATTR_NAN_ULW with the ULW blob. + * @NL80211_CMD_NAN_CHANNEL_EVAC: Notification to indicate that a NAN + * channel has been evacuated due to resource conflicts with other + * interfaces. This can happen when another interface sharing the channel + * resource with NAN needs to move to a different channel (e.g., channel + * switch or link switch on a BSS interface). + * The notification contains %NL80211_ATTR_NAN_CHANNEL attribute + * identifying the evacuated channel. + * User space may reconfigure the local schedule in response to this + * notification. + * @NL80211_CMD_START_PD: Start PD operation, identified by its + * %NL80211_ATTR_WDEV interface. This interface must have been previously + * created with %NL80211_CMD_NEW_INTERFACE. + * @NL80211_CMD_STOP_PD: Stop the PD operation, identified by + * its %NL80211_ATTR_WDEV interface. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1494,7 +1560,7 @@ enum nl80211_commands { NL80211_CMD_UNEXPECTED_FRAME, - NL80211_CMD_PROBE_CLIENT, + NL80211_CMD_PROBE_PEER, NL80211_CMD_REGISTER_BEACONS, @@ -1624,6 +1690,21 @@ enum nl80211_commands { NL80211_CMD_NAN_NEXT_DW_NOTIFICATION, NL80211_CMD_NAN_CLUSTER_JOINED, + NL80211_CMD_INCUMBENT_SIGNAL_DETECT, + + NL80211_CMD_NAN_SET_LOCAL_SCHED, + + NL80211_CMD_NAN_SCHED_UPDATE_DONE, + + NL80211_CMD_NAN_SET_PEER_SCHED, + + NL80211_CMD_NAN_ULW_UPDATE, + + NL80211_CMD_NAN_CHANNEL_EVAC, + + NL80211_CMD_START_PD, + NL80211_CMD_STOP_PD, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1650,6 +1731,7 @@ enum nl80211_commands { #define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG #define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG #define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE +#define NL80211_CMD_PROBE_CLIENT NL80211_CMD_PROBE_PEER /** * enum nl80211_attrs - nl80211 netlink attributes @@ -2651,7 +2733,8 @@ enum nl80211_commands { * a flow is assigned on each round of the DRR scheduler. * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from * association request when used with NL80211_CMD_NEW_STATION). Can be set - * only if %NL80211_STA_FLAG_WME is set. + * only if %NL80211_STA_FLAG_WME is set (except for NAN, which uses WME + * anyway). * * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include * in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing @@ -2924,11 +3007,13 @@ enum nl80211_commands { * @NL80211_ATTR_EPCS: Flag attribute indicating that EPCS is enabled for a * station interface. * - * @NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS: Extended MLD capabilities and - * operations that userspace implements to use during association/ML - * link reconfig, currently only "BTM MLD Recommendation For Multiple - * APs Support". Drivers may set additional flags that they support - * in the kernel or device. + * @NL80211_ATTR_EXT_MLD_CAPA_AND_OPS: Extended MLD capabilities and operations. + * For association and link reconfiguration, indicates extra capabilities + * that userspace implements, currently only "BTM MLD Recommendation For + * Multiple APs Support". + * For wiphy information, additional flags that drivers will set, but + * this is informational only for userspace (it's not expected to set + * these.) * * @NL80211_ATTR_WIPHY_RADIO_INDEX: (int) Integer attribute denoting the index * of the radio in interest. Internally a value of -1 is used to @@ -2974,6 +3059,132 @@ enum nl80211_commands { * primary channel is 2 MHz wide, and the control channel designates * the 1 MHz primary subchannel within that 2 MHz primary. * + * @NL80211_ATTR_EPP_PEER: A flag attribute to indicate if the peer is an EPP + * STA. Used with %NL80211_CMD_NEW_STA and %NL80211_CMD_ADD_LINK_STA + * + * @NL80211_ATTR_UHR_CAPABILITY: UHR Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION). Can be set + * only if HE/EHT are also available. + * @NL80211_ATTR_DISABLE_UHR: Force UHR capable interfaces to disable + * this feature during association. This is a flag attribute. + * Currently only supported in mac80211 drivers. + * @NL80211_ATTR_NAN_CHANNEL: This is a nested attribute. There can be multiple + * attributes of this type, each one represents a channel definition and + * consists of top-level attributes like %NL80211_ATTR_WIPHY_FREQ. + * When used with %NL80211_CMD_NAN_SET_LOCAL_SCHED, it specifies + * the channel definitions on which the radio needs to operate during + * specific time slots. All of the channel definitions should be mutually + * incompatible. With this command, %NL80211_ATTR_NAN_CHANNEL_ENTRY and + * %NL80211_ATTR_NAN_RX_NSS are mandatory. + * When used with %NL80211_CMD_NAN_SET_PEER_SCHED, it configures the + * peer NAN channels. In that case, the channel definitions can be + * compatible to each other, or even identical just with different RX NSS. + * With this command, %NL80211_ATTR_NAN_CHANNEL_ENTRY and + * %NL80211_ATTR_NAN_RX_NSS are mandatory. + * The number of channels should fit the current configuration of channels + * and the possible interface combinations. + * If an existing NAN channel is changed but the chandef isn't, the + * channel entry must also remain unchanged. + * When used with %NL80211_CMD_NAN_CHANNEL_EVAC, this identifies the + * channels that were evacuated. + * @NL80211_ATTR_NAN_CHANNEL_ENTRY: a byte array of 6 bytes. contains the + * Channel Entry as defined in Wi-Fi Aware (TM) 4.0 specification Table + * 100 (Channel Entry format for the NAN Availability attribute). + * @NL80211_ATTR_NAN_RX_NSS: (u8) RX NSS used for a NAN channel. This is + * used with %NL80211_ATTR_NAN_CHANNEL when configuring NAN channels with + * %NL80211_CMD_NAN_SET_LOCAL_SCHED or %NL80211_CMD_NAN_SET_PEER_SCHED. + * @NL80211_ATTR_NAN_TIME_SLOTS: an array of u8 values and 32 cells. each value + * maps a time slot to the chandef on which the radio should operate on in + * that time. %NL80211_NAN_SCHED_NOT_AVAIL_SLOT indicates unscheduled. + * The chandef is represented using its index, where the index is the + * sequential number of the %NL80211_ATTR_NAN_CHANNEL attribute within all + * the attributes of this type. + * Each slots spans over 16TUs, hence the entire schedule spans over + * 512TUs. Other slot durations and periods are currently not supported. + * @NL80211_ATTR_NAN_AVAIL_BLOB: (Binary) The NAN Availability attribute blob, + * including the attribute header, as defined in Wi-Fi Aware (TM) 4.0 + * specification Table 93 (NAN Availability attribute format). Required with + * %NL80211_CMD_NAN_SET_LOCAL_SCHED to provide the raw NAN Availability + * attribute. Used by the device to publish Schedule Update NAFs. + * @NL80211_ATTR_NAN_SCHED_DEFERRED: Flag attribute used with + * %NL80211_CMD_NAN_SET_LOCAL_SCHED. When present, the command is a + * request from the device to perform an announced schedule update. This + * means that it needs to send the updated NAN availability to the peers, + * and do the actual switch on the right time (i.e. at the end of the slot + * after the slot in which the updated NAN Availability was sent). Since + * the slots management is done in the device, the update to the peers + * needs to be sent by the device, so it knows the actual switch time. + * If the flag is not set, the schedule should be applied immediately. + * When this flag is set, the total number of NAN channels from both the + * old and new schedules must not exceed the allowed number of local NAN + * channels, because with deferred scheduling the old channels cannot be + * removed before adding the new ones to free up space. + * @NL80211_ATTR_NAN_SCHED_UPDATE_SUCCESS: flag attribute used with + * %NL80211_CMD_NAN_SCHED_UPDATE_DONE to indicate that the deferred + * schedule update completed successfully. If this flag is not present, + * the update failed. + * @NL80211_ATTR_NAN_NMI_MAC: The address of the NMI station to which this NDI + * station belongs. Used with %NL80211_CMD_NEW_STATION when adding an NDI + * station. + * @NL80211_ATTR_NAN_ULW: (Binary) The initial ULW(s) as published by the + * peer, as defined in the Wi-Fi Aware (TM) 4.0 specification Table 109 + * (Unaligned Schedule attribute format). Used to configure the device + * with the initial ULW(s) of a peer, before the device starts tracking it. + * @NL80211_ATTR_NAN_COMMITTED_DW: (u16) The committed DW as published by the + * peer, as defined in the Wi-Fi Aware (TM) 4.0 specification Table 80 + * (Committed DW Information field format). + * @NL80211_ATTR_NAN_SEQ_ID: (u8) The sequence ID of the peer schedule that + * %NL80211_CMD_NAN_SET_PEER_SCHED defines. The device follows the + * sequence ID in the frames to identify newer schedules. Once a schedule + * with a higher sequence ID is received, the device may stop communicating + * with that peer until a new peer schedule with a matching sequence ID is + * received. + * @NL80211_ATTR_NAN_MAX_CHAN_SWITCH_TIME: (u16) The maximum channel switch + * time, in microseconds. + * @NL80211_ATTR_NAN_PEER_MAPS: Nested array of peer schedule maps. + * Used with %NL80211_CMD_NAN_SET_PEER_SCHED. Contains up to 2 entries, + * each containing nested attributes from &enum nl80211_nan_peer_map_attrs. + * + * @NL80211_ATTR_INCUMBENT_SIGNAL_INTERFERENCE_BITMAP: u32 attribute specifying + * the signal interference bitmap detected on the operating bandwidth for + * %NL80211_CMD_INCUMBENT_SIGNAL_DETECT. Each bit represents a 20 MHz + * segment, lowest bit corresponds to the lowest 20 MHz segment, in the + * operating bandwidth where the interference is detected. Punctured + * sub-channels are included in the bitmap structure; however, since + * interference detection is not performed on these sub-channels, their + * corresponding bits are consistently set to zero. + * + * @NL80211_ATTR_UHR_OPERATION: Full UHR Operation element, as it appears in + * association response etc., since it's abridged in the beacon. Used + * for START_AP etc. + * + * @NL80211_ATTR_ASSOC_ENCRYPTED: Flag attribute, used only with the + * %NL80211_CMD_CONNECT event in SME-in-driver mode. The driver should + * set this flag to indicate that both the (Re)Association Request frame + * and the corresponding (Re)Association Response frame are transmitted + * encrypted over the air. Enhanced Privacy Protection (EPP), as defined + * in IEEE P802.11bi/D4.0, mandates this encryption. + * + * @NL80211_ATTR_NPCA_PRIMARY_FREQ: NPCA primary channel (u32) + * @NL80211_ATTR_NPCA_PUNCT_BITMAP: NPCA puncturing bitmap (u32) + * + * @NL80211_ATTR_STA_DUMP_LINK_STATS: Request flag for %NL80211_CMD_GET_STATION + * (dump mode only). When set on an MLD station, the dump produces two + * %NL80211_CMD_NEW_STATION messages per station per dump call: + * + * 1. An aggregated-stats message whose top-level %NL80211_ATTR_STA_INFO + * contains MLO-combined statistics (same content as a dump without + * this flag). + * + * 2. For each active link, a per-link message containing + * %NL80211_ATTR_MLO_LINKS with a single link entry. Each entry holds + * %NL80211_ATTR_MLO_LINK_ID, the link-specific %NL80211_ATTR_MAC, + * and %NL80211_ATTR_STA_INFO with per-link statistics (see + * &enum nl80211_sta_info). + * + * The aggregated message always precedes the per-link messages for the + * same station within a dump sequence. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3529,7 +3740,7 @@ enum nl80211_attrs { NL80211_ATTR_MLO_RECONF_REM_LINKS, NL80211_ATTR_EPCS, - NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS, + NL80211_ATTR_EXT_MLD_CAPA_AND_OPS, NL80211_ATTR_WIPHY_RADIO_INDEX, @@ -3542,6 +3753,38 @@ enum nl80211_attrs { NL80211_ATTR_S1G_PRIMARY_2MHZ, + NL80211_ATTR_EPP_PEER, + + NL80211_ATTR_UHR_CAPABILITY, + NL80211_ATTR_DISABLE_UHR, + + NL80211_ATTR_INCUMBENT_SIGNAL_INTERFERENCE_BITMAP, + + NL80211_ATTR_UHR_OPERATION, + + NL80211_ATTR_NAN_CHANNEL, + NL80211_ATTR_NAN_CHANNEL_ENTRY, + NL80211_ATTR_NAN_TIME_SLOTS, + NL80211_ATTR_NAN_RX_NSS, + NL80211_ATTR_NAN_AVAIL_BLOB, + NL80211_ATTR_NAN_SCHED_DEFERRED, + NL80211_ATTR_NAN_SCHED_UPDATE_SUCCESS, + + NL80211_ATTR_NAN_NMI_MAC, + + NL80211_ATTR_NAN_ULW, + NL80211_ATTR_NAN_COMMITTED_DW, + NL80211_ATTR_NAN_SEQ_ID, + NL80211_ATTR_NAN_MAX_CHAN_SWITCH_TIME, + NL80211_ATTR_NAN_PEER_MAPS, + + NL80211_ATTR_ASSOC_ENCRYPTED, + + NL80211_ATTR_NPCA_PRIMARY_FREQ, + NL80211_ATTR_NPCA_PUNCT_BITMAP, + + NL80211_ATTR_STA_DUMP_LINK_STATS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3556,6 +3799,7 @@ enum nl80211_attrs { #define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA #define NL80211_ATTR_CSA_C_OFF_BEACON NL80211_ATTR_CNTDWN_OFFS_BEACON #define NL80211_ATTR_CSA_C_OFF_PRESP NL80211_ATTR_CNTDWN_OFFS_PRESP +#define NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS NL80211_ATTR_EXT_MLD_CAPA_AND_OPS /* * Allow user space programs to use #ifdef on new attributes by defining them @@ -3635,6 +3879,10 @@ enum nl80211_attrs { * @NL80211_IFTYPE_OCB: Outside Context of a BSS * This mode corresponds to the MIB variable dot11OCBActivated=true * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev) + * @NL80211_IFTYPE_NAN_DATA: NAN data interface type (netdev); NAN data + * interfaces can only be brought up (IFF_UP) when a NAN interface + * already exists and NAN has been started (using %NL80211_CMD_START_NAN). + * @NL80211_IFTYPE_PD: PD device interface type (not a netdev) * @NL80211_IFTYPE_MAX: highest interface type number currently defined * @NUM_NL80211_IFTYPES: number of defined interface types * @@ -3656,6 +3904,8 @@ enum nl80211_iftype { NL80211_IFTYPE_P2P_DEVICE, NL80211_IFTYPE_OCB, NL80211_IFTYPE_NAN, + NL80211_IFTYPE_NAN_DATA, + NL80211_IFTYPE_PD, /* keep last */ NUM_NL80211_IFTYPES, @@ -3894,6 +4144,12 @@ enum nl80211_eht_ru_alloc { * @NL80211_RATE_INFO_4_MHZ_WIDTH: 4 MHz S1G rate * @NL80211_RATE_INFO_8_MHZ_WIDTH: 8 MHz S1G rate * @NL80211_RATE_INFO_16_MHZ_WIDTH: 16 MHz S1G rate + * @NL80211_RATE_INFO_UHR_MCS: UHR MCS index (u8, 0-15, 17, 19, 20, 23) + * Note that the other EHT attributes (such as @NL80211_RATE_INFO_EHT_NSS) + * are used in conjunction with this where applicable + * @NL80211_RATE_INFO_UHR_ELR: UHR ELR flag, which restricts NSS to 1, + * MCS to 0 or 1, and GI to %NL80211_RATE_INFO_EHT_GI_1_6. + * @NL80211_RATE_INFO_UHR_IM: UHR Interference Mitigation flag * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ enum nl80211_rate_info { @@ -3927,6 +4183,9 @@ enum nl80211_rate_info { NL80211_RATE_INFO_4_MHZ_WIDTH, NL80211_RATE_INFO_8_MHZ_WIDTH, NL80211_RATE_INFO_16_MHZ_WIDTH, + NL80211_RATE_INFO_UHR_MCS, + NL80211_RATE_INFO_UHR_ELR, + NL80211_RATE_INFO_UHR_IM, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, @@ -4237,8 +4496,8 @@ enum nl80211_mpath_info { * capabilities IE * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as * defined in HE capabilities IE - * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16), - * given for all 6 GHz band channels + * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities, + * given for all 6 GHz band channels (binary, element content) * @NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS: vendor element capabilities that are * advertised on this band/for this iftype (binary) * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC: EHT MAC capabilities as in EHT @@ -4249,6 +4508,10 @@ enum nl80211_mpath_info { * capabilities element * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE: EHT PPE thresholds information as * defined in EHT capabilities element + * @NL80211_BAND_IFTYPE_ATTR_UHR_CAP_MAC: UHR MAC capabilities as in UHR + * capabilities element + * @NL80211_BAND_IFTYPE_ATTR_UHR_CAP_PHY: UHR PHY capabilities as in UHR + * capabilities element * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined */ @@ -4266,6 +4529,8 @@ enum nl80211_band_iftype_attr { NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY, NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET, NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE, + NL80211_BAND_IFTYPE_ATTR_UHR_CAP_MAC, + NL80211_BAND_IFTYPE_ATTR_UHR_CAP_PHY, /* keep last */ __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, @@ -4330,6 +4595,46 @@ enum nl80211_band_attr { #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA /** + * enum nl80211_nan_phy_cap_attr - NAN PHY capabilities attributes + * @__NL80211_NAN_PHY_CAP_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_NAN_PHY_CAP_ATTR_HT_MCS_SET: 16-byte attribute containing HT MCS set + * @NL80211_NAN_PHY_CAP_ATTR_HT_CAPA: HT capabilities (u16) + * @NL80211_NAN_PHY_CAP_ATTR_HT_AMPDU_FACTOR: HT A-MPDU factor (u8) + * @NL80211_NAN_PHY_CAP_ATTR_HT_AMPDU_DENSITY: HT A-MPDU density (u8) + * @NL80211_NAN_PHY_CAP_ATTR_VHT_MCS_SET: 8-byte attribute containing VHT MCS set + * @NL80211_NAN_PHY_CAP_ATTR_VHT_CAPA: VHT capabilities (u32) + * @NL80211_NAN_PHY_CAP_ATTR_HE_MAC: HE MAC capabilities + * @NL80211_NAN_PHY_CAP_ATTR_HE_PHY: HE PHY capabilities + * @NL80211_NAN_PHY_CAP_ATTR_HE_MCS_SET: HE supported NSS/MCS combinations + * @NL80211_NAN_PHY_CAP_ATTR_HE_PPE: HE PPE thresholds + * @NL80211_NAN_PHY_CAP_ATTR_MAX: highest NAN PHY cap attribute number + * @__NL80211_NAN_PHY_CAP_ATTR_AFTER_LAST: internal use + */ +enum nl80211_nan_phy_cap_attr { + __NL80211_NAN_PHY_CAP_ATTR_INVALID, + + /* HT capabilities */ + NL80211_NAN_PHY_CAP_ATTR_HT_MCS_SET, + NL80211_NAN_PHY_CAP_ATTR_HT_CAPA, + NL80211_NAN_PHY_CAP_ATTR_HT_AMPDU_FACTOR, + NL80211_NAN_PHY_CAP_ATTR_HT_AMPDU_DENSITY, + + /* VHT capabilities */ + NL80211_NAN_PHY_CAP_ATTR_VHT_MCS_SET, + NL80211_NAN_PHY_CAP_ATTR_VHT_CAPA, + + /* HE capabilities */ + NL80211_NAN_PHY_CAP_ATTR_HE_MAC, + NL80211_NAN_PHY_CAP_ATTR_HE_PHY, + NL80211_NAN_PHY_CAP_ATTR_HE_MCS_SET, + NL80211_NAN_PHY_CAP_ATTR_HE_PPE, + + /* keep last */ + __NL80211_NAN_PHY_CAP_ATTR_AFTER_LAST, + NL80211_NAN_PHY_CAP_ATTR_MAX = __NL80211_NAN_PHY_CAP_ATTR_AFTER_LAST - 1 +}; + +/** * enum nl80211_wmm_rule - regulatory wmm rule * * @__NL80211_WMMR_INVALID: attribute number 0 is reserved @@ -4445,6 +4750,15 @@ enum nl80211_wmm_rule { * channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_NO_16MHZ: 16 MHz operation is not allowed on this * channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_S1G_NO_PRIMARY: Channel is not permitted for use + * as a primary channel. Does not prevent the channel from existing + * as a non-primary subchannel. Only applicable to S1G channels. + * @NL80211_FREQUENCY_ATTR_NO_UHR: UHR operation is not allowed on this channel + * in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_CAC_START_TIME: Channel Availability Check (CAC) + * start time (CLOCK_BOOTTIME, nanoseconds). Only present when CAC is + * currently in progress on this channel. + * @NL80211_FREQUENCY_ATTR_PAD: attribute used for padding for 64-bit alignment * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -4493,6 +4807,10 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_4MHZ, NL80211_FREQUENCY_ATTR_NO_8MHZ, NL80211_FREQUENCY_ATTR_NO_16MHZ, + NL80211_FREQUENCY_ATTR_S1G_NO_PRIMARY, + NL80211_FREQUENCY_ATTR_NO_UHR, + NL80211_FREQUENCY_ATTR_CAC_START_TIME, + NL80211_FREQUENCY_ATTR_PAD, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -4706,6 +5024,7 @@ enum nl80211_sched_scan_match_attr { * despite NO_IR configuration. * @NL80211_RRF_ALLOW_20MHZ_ACTIVITY: Allow activity in 20 MHz bandwidth, * despite NO_IR configuration. + * @NL80211_RRF_NO_UHR: UHR operation not allowed */ enum nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1 << 0, @@ -4732,6 +5051,7 @@ enum nl80211_reg_rule_flags { NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1 << 23, NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1 << 24, NL80211_RRF_ALLOW_20MHZ_ACTIVITY = 1 << 25, + NL80211_RRF_NO_UHR = 1 << 26, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR @@ -5426,6 +5746,9 @@ enum nl80211_bss_status { * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key + * @NL80211_AUTHTYPE_EPPKE: Enhanced Privacy Protection Key Exchange + * @NL80211_AUTHTYPE_IEEE8021X: IEEE 802.1X authentication utilizing + * Authentication frames * @__NL80211_AUTHTYPE_NUM: internal * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by @@ -5441,6 +5764,8 @@ enum nl80211_auth_type { NL80211_AUTHTYPE_FILS_SK, NL80211_AUTHTYPE_FILS_SK_PFS, NL80211_AUTHTYPE_FILS_PK, + NL80211_AUTHTYPE_EPPKE, + NL80211_AUTHTYPE_IEEE8021X, /* keep last */ __NL80211_AUTHTYPE_NUM, @@ -5520,6 +5845,18 @@ enum nl80211_key_default_types { * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. * Defaults to @NL80211_KEY_RX_TX. * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key + * @NL80211_KEY_LTF_SEED: LTF key seed is used by the driver to generate + * secure LTF keys used in case of peer measurement request with FTM + * request type as either %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED + * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED. Secure LTF key seeds + * will help enable PHY security in peer measurement session. + * The LTF key seed is installed along with the TK (Temporal Key) using + * %NL80211_CMD_NEW_KEY. The TK is configured using the + * %NL80211_ATTR_KEY_DATA attribute, while the LTF key seed is configured + * using this attribute. Both keys must be configured before initiation + * of peer measurement to ensure peer measurement session is secure. + * Only valid if %NL80211_EXT_FEATURE_SET_KEY_LTF_SEED is set. This + * attribute is restricted to pairwise keys (%NL80211_KEYTYPE_PAIRWISE). * * @__NL80211_KEY_AFTER_LAST: internal * @NL80211_KEY_MAX: highest key attribute @@ -5536,6 +5873,7 @@ enum nl80211_key_attributes { NL80211_KEY_DEFAULT_TYPES, NL80211_KEY_MODE, NL80211_KEY_DEFAULT_BEACON, + NL80211_KEY_LTF_SEED, /* keep last */ __NL80211_KEY_AFTER_LAST, @@ -6745,6 +7083,33 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_BEACON_RATE_EHT: Driver supports beacon rate * configuration (AP/mesh) with EHT rates. * + * @NL80211_EXT_FEATURE_EPPKE: Driver supports Enhanced Privacy Protection + * Key Exchange (EPPKE) with user space SME (NL80211_CMD_AUTHENTICATE) + * in non-AP STA mode. + * + * @NL80211_EXT_FEATURE_ASSOC_FRAME_ENCRYPTION: This specifies that the + * driver supports encryption of (Re)Association Request and Response + * frames in both non‑AP STA and AP mode as specified in + * "IEEE P802.11bi/D3.0, 12.16.6". + * + * @NL80211_EXT_FEATURE_IEEE8021X_AUTH: Driver supports IEEE 802.1X + * authentication utilizing Authentication frames with user space SME + * (NL80211_CMD_AUTHENTICATE) in non-AP STA mode, as specified in + * "IEEE P802.11bi/D4.0, 12.16.5". + * + * @NL80211_EXT_FEATURE_ROC_ADDR_FILTER: Driver supports MAC address + * filtering during remain-on-channel. When %NL80211_ATTR_MAC is + * provided with %NL80211_CMD_REMAIN_ON_CHANNEL, the driver will + * forward frames with a matching MAC address to userspace during + * the off-channel period. + * + * @NL80211_EXT_FEATURE_SET_KEY_LTF_SEED: Driver supports installing the + * LTF key seed via %NL80211_KEY_LTF_SEED. The seed is used to generate + * secure LTF keys for secure LTF measurement sessions. + * + * @NL80211_EXT_FEATURE_PROBE_AP: Driver supports probing the associated AP + * in STA mode using @NL80211_CMD_PROBE_PEER. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -6821,6 +7186,12 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_DFS_CONCURRENT, NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT, NL80211_EXT_FEATURE_BEACON_RATE_EHT, + NL80211_EXT_FEATURE_EPPKE, + NL80211_EXT_FEATURE_ASSOC_FRAME_ENCRYPTION, + NL80211_EXT_FEATURE_IEEE8021X_AUTH, + NL80211_EXT_FEATURE_ROC_ADDR_FILTER, + NL80211_EXT_FEATURE_SET_KEY_LTF_SEED, + NL80211_EXT_FEATURE_PROBE_AP, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -7433,6 +7804,8 @@ enum nl80211_nan_band_conf_attributes { * address that can take values from 50-6F-9A-01-00-00 to * 50-6F-9A-01-FF-FF. This attribute is optional. If not present, * a random Cluster ID will be chosen. + * This attribute will be ignored in NL80211_CMD_CHANGE_NAN_CONFIG + * since after NAN was started, the cluster ID can no longer change. * @NL80211_NAN_CONF_EXTRA_ATTRS: Additional NAN attributes to be * published in the beacons. This is an optional byte array. * @NL80211_NAN_CONF_VENDOR_ELEMS: Vendor-specific elements that will @@ -7672,6 +8045,26 @@ enum nl80211_peer_measurement_resp { }; /** + * enum nl80211_peer_measurement_ftm_req_type - FTM ranging request type, + * used with %NL80211_PMSR_PEER_ATTR_REQ_TYPE + * + * @NL80211_PMSR_FTM_REQ_TYPE_INFRA: infrastructure ranging, i.e. STA-to-AP + * @NL80211_PMSR_FTM_REQ_TYPE_PD: peer-to-peer ranging as defined in the + * Wi-Fi Alliance specification "Proximity Ranging (PR) Implementation + * Consideration Draft 1.9 Rev 1" + * @NUM_NL80211_PMSR_FTM_REQ_TYPE: internal + * @NL80211_PMSR_FTM_REQ_TYPE_MAX: highest request type value + */ +enum nl80211_peer_measurement_ftm_req_type { + NL80211_PMSR_FTM_REQ_TYPE_INFRA, + NL80211_PMSR_FTM_REQ_TYPE_PD, + + /* keep last */ + NUM_NL80211_PMSR_FTM_REQ_TYPE, + NL80211_PMSR_FTM_REQ_TYPE_MAX = NUM_NL80211_PMSR_FTM_REQ_TYPE - 1 +}; + +/** * enum nl80211_peer_measurement_peer_attrs - peer attributes for measurement * @__NL80211_PMSR_PEER_ATTR_INVALID: invalid * @@ -7684,6 +8077,9 @@ enum nl80211_peer_measurement_resp { * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by * measurement type, with attributes from the * &enum nl80211_peer_measurement_resp inside. + * @NL80211_PMSR_PEER_ATTR_REQ_TYPE: u32 attribute specifying the ranging + * request type, using values from &enum nl80211_peer_measurement_ftm_req_type. + * If absent, defaults to %NL80211_PMSR_FTM_REQ_TYPE_INFRA. * * @NUM_NL80211_PMSR_PEER_ATTRS: internal * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number @@ -7695,6 +8091,7 @@ enum nl80211_peer_measurement_peer_attrs { NL80211_PMSR_PEER_ATTR_CHAN, NL80211_PMSR_PEER_ATTR_REQ, NL80211_PMSR_PEER_ATTR_RESP, + NL80211_PMSR_PEER_ATTR_REQ_TYPE, /* keep last */ NUM_NL80211_PMSR_PEER_ATTRS, @@ -7721,6 +8118,18 @@ enum nl80211_peer_measurement_peer_attrs { * meaningless, just a list of peers to measure with, with the * sub-attributes taken from * &enum nl80211_peer_measurement_peer_attrs. + * @NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE: u32 attribute indicating the + * maximum number of peers supported when the device operates in the + * ISTA (Initiator STA) role. If absent, no role-specific peer limit + * applies. The sum of %NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE and + * %NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE is enforced when the device + * supports concurrent ISTA/RSTA operation. + * @NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE: u32 attribute indicating the + * maximum number of peers supported when the device operates in the + * RSTA (Responder STA) role. If absent, no role-specific peer limit + * applies. The sum of %NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE and + * %NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE is enforced when the device + * supports concurrent ISTA/RSTA operation. * * @NUM_NL80211_PMSR_ATTR: internal * @NL80211_PMSR_ATTR_MAX: highest attribute number @@ -7733,6 +8142,8 @@ enum nl80211_peer_measurement_attrs { NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR, NL80211_PMSR_ATTR_TYPE_CAPA, NL80211_PMSR_ATTR_PEERS, + NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE, + NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE, /* keep last */ NUM_NL80211_PMSR_ATTR, @@ -7767,6 +8178,78 @@ enum nl80211_peer_measurement_attrs { * trigger based ranging measurement is supported * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating * if non-trigger-based ranging measurement is supported + * @NL80211_PMSR_FTM_CAPA_ATTR_6GHZ_SUPPORT: flag attribute indicating if + * ranging on the 6 GHz band is supported + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_LTF_REP: u32 attribute indicating + * the maximum number of LTF repetitions the device can transmit in the + * preamble of the ranging NDP (zero means only one LTF, no repetitions) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_LTF_REP: u32 attribute indicating + * the maximum number of LTF repetitions the device can receive in the + * preamble of the ranging NDP (zero means only one LTF, no repetitions) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_STS: u32 attribute indicating + * the maximum number of space-time streams supported for ranging NDP TX + * (zero-based) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_STS: u32 attribute indicating + * the maximum number of space-time streams supported for ranging NDP RX + * (zero-based) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_TX: u32 attribute indicating the + * maximum total number of LTFs the device can transmit. The total number + * of LTFs is (number of LTF repetitions) * (number of space-time streams). + * This limits the allowed combinations of LTF repetitions and STS. + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_RX: u32 attribute indicating the + * maximum total number of LTFs the device can receive. The total number + * of LTFs is (number of LTF repetitions) * (number of space-time streams). + * This limits the allowed combinations of LTF repetitions and STS. + * @NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT: flag attribute indicating the + * device supports operating as the RSTA in PMSR FTM request + * @NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS: nested attribute containing ISTA + * (initiator) role capabilities. Uses the same sub-attributes as + * %NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS. + * @NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS: nested attribute containing RSTA + * (responder) role capabilities. + * @NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_NTB: flag attribute (used inside + * %NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS or + * %NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS) indicating NTB ranging support. + * @NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_TB: flag attribute (used inside + * %NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS or + * %NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS) indicating TB ranging support. + * @NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_EDCA: flag attribute (used inside + * %NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS or + * %NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS) indicating EDCA based ranging + * support. + * @NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS: nested attribute containing ranging + * type capabilities. Uses sub-attributes from + * &enum nl80211_peer_measurement_ftm_type_capa. + * @NL80211_PMSR_FTM_CAPA_ATTR_CONCURRENT_ISTA_RSTA_SUPPORT: flag attribute + * indicating that the device can simultaneously act as initiator and + * responder in a multi-peer measurement request. Only valid if + * @NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT is set. + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_NUM_TX_ANTENNAS: u32 attribute indicating + * the maximum number of transmit antennas supported for EDCA based ranging + * (0 means unknown) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_NUM_RX_ANTENNAS: u32 attribute indicating + * the maximum number of receive antennas supported for EDCA based ranging + * (0 means unknown) + * @NL80211_PMSR_FTM_CAPA_ATTR_MIN_INTERVAL_EDCA: u32 attribute indicating + * the minimum EDCA ranging interval supported by the device + * in milli seconds. (0 means unknown). Applications can use this value + * to estimate the burst period to be given in the FTM request for the + * EDCA based ranging case. If non-zero, this value will be used to + * validate the burst period in the FTM request. + * @NL80211_PMSR_FTM_CAPA_ATTR_MIN_INTERVAL_NTB: u32 attribute indicating + * the minimum NTB ranging interval supported by the device + * in milli seconds. (0 means unknown). Applications can use this value + * to estimate the burst period to be given in the FTM request for the + * NTB ranging case. If non-zero, this value will be used to validate + * the nominal time in the FTM request. + * @NL80211_PMSR_FTM_CAPA_ATTR_PD_PREAMBLES: u32 bitmap of values from + * &enum nl80211_preamble indicating the supported preambles for PD + * ranging requests. Only valid if %NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT + * is set. + * @NL80211_PMSR_FTM_CAPA_ATTR_PD_BANDWIDTHS: u32 bitmap of values from + * &enum nl80211_chan_width indicating the supported channel bandwidths + * for PD ranging requests. Only valid if + * %NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT is set. * * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number @@ -7784,6 +8267,27 @@ enum nl80211_peer_measurement_ftm_capa { NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST, NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED, NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED, + NL80211_PMSR_FTM_CAPA_ATTR_6GHZ_SUPPORT, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_LTF_REP, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_LTF_REP, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_TX_STS, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_RX_STS, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_TX, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_TOTAL_LTF_RX, + NL80211_PMSR_FTM_CAPA_ATTR_RSTA_SUPPORT, + NL80211_PMSR_FTM_CAPA_ATTR_ISTA_CAPS, + NL80211_PMSR_FTM_CAPA_ATTR_RSTA_CAPS, + NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_NTB, + NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_TB, + NL80211_PMSR_FTM_CAPA_ATTR_SUPPORT_EDCA, + NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS, + NL80211_PMSR_FTM_CAPA_ATTR_CONCURRENT_ISTA_RSTA_SUPPORT, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_NUM_TX_ANTENNAS, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_NUM_RX_ANTENNAS, + NL80211_PMSR_FTM_CAPA_ATTR_MIN_INTERVAL_EDCA, + NL80211_PMSR_FTM_CAPA_ATTR_MIN_INTERVAL_NTB, + NL80211_PMSR_FTM_CAPA_ATTR_PD_PREAMBLES, + NL80211_PMSR_FTM_CAPA_ATTR_PD_BANDWIDTHS, /* keep last */ NUM_NL80211_PMSR_FTM_CAPA_ATTR, @@ -7791,6 +8295,33 @@ enum nl80211_peer_measurement_ftm_capa { }; /** + * enum nl80211_peer_measurement_ftm_type_capa - FTM ranging type capability + * sub-attributes, used inside %NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS + * @__NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INVALID: invalid + * + * @NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INFRA_SUPPORT: flag attribute indicating + * that the device supports infrastructure ranging (STA-to-AP or + * AP-to-STA) as part of Proximity Detection + * @NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT: flag attribute indicating that + * the device supports peer-to-peer ranging as mentioned in the + * specification "PR Implementation Consideration Draft 1.9 rev 1" where + * PD stands for proximity detection + * + * @NUM_NL80211_PMSR_FTM_TYPE_CAPA_ATTR: internal + * @NL80211_PMSR_FTM_TYPE_CAPA_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_ftm_type_capa { + __NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INVALID, + + NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INFRA_SUPPORT, + NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT, + + /* keep last */ + NUM_NL80211_PMSR_FTM_TYPE_CAPA_ATTR, + NL80211_PMSR_FTM_TYPE_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_TYPE_CAPA_ATTR - 1 +}; + +/** * enum nl80211_peer_measurement_ftm_req - FTM request attributes * @__NL80211_PMSR_FTM_REQ_ATTR_INVALID: invalid * @@ -7799,15 +8330,20 @@ enum nl80211_peer_measurement_ftm_capa { * &enum nl80211_preamble), optional for DMG (u32) * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in * 802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element" - * (u8, 0-15, optional with default 15 i.e. "no preference") + * (u8, 0-15, optional with default 15 i.e. "no preference". No limit for + * non-EDCA ranging) * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units * of 100ms (u16, optional with default 0) * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016 * Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with - * default 15 i.e. "no preference") - * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames - * requested per burst + * default 15 i.e. "no preference"). For non-EDCA ranging, this is the + * burst duration in milliseconds (optional with default 0, i.e. let the + * device decide). + * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: (Optional) number of successful + * FTM frames requested per burst * (u8, 0-31, optional with default 0 i.e. "no preference") + * If the attribute is absent ("no preference"), the driver or firmware can + * choose a suitable value. * @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries * (u8, default 3) * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag) @@ -7833,6 +8369,58 @@ enum nl80211_peer_measurement_ftm_capa { * @NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR: optional. The BSS color of the * responder. Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED is set. + * @NL80211_PMSR_FTM_REQ_ATTR_RSTA: optional. Request to perform the measurement + * as the RSTA (flag). When set, the device is expected to dwell on the + * channel specified in %NL80211_PMSR_PEER_ATTR_CHAN until it receives the + * FTM request from the peer or the timeout specified by + * %NL80211_ATTR_TIMEOUT has expired. + * Only valid if %NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK is set (so the + * RSTA will have the measurement results to report back in the FTM + * response). + * @NL80211_PMSR_FTM_REQ_ATTR_MIN_TIME_BETWEEN_MEASUREMENTS: minimum time + * between two consecutive range measurements in units of 100 microseconds, + * for non-trigger based ranging (u32). Should be set as short as possible + * to minimize turnaround time, since two-way ranging with delayed LMR + * requires two measurements. Only valid if + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * @NL80211_PMSR_FTM_REQ_ATTR_MAX_TIME_BETWEEN_MEASUREMENTS: maximum time + * between two consecutive range measurements in units of 10 milliseconds, + * for non-trigger based ranging (u32). Acts as a session timeout; if + * exceeded, the ranging session should be terminated. Only valid if + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * @NL80211_PMSR_FTM_REQ_ATTR_NOMINAL_TIME: The nominal time field shall be + * set to the nominal duration between adjacent Availability Windows in + * units of milli seconds (u32). Mandatory if + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * @NL80211_PMSR_FTM_REQ_ATTR_AW_DURATION: (Optional) The AW duration field + * shall be set to the duration of the AW in units of 1ms (0-255 ms) (u32). + * Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * If the attribute is absent ("no preference"), the driver or firmware + * can choose a suitable value. + * @NL80211_PMSR_FTM_REQ_ATTR_NUM_MEASUREMENTS: (Optional) number of + * Availability Windows (AWs) to schedule for non-trigger-based ranging. + * Each AW may contain multiple FTM exchanges as configured by + * %NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST. Only valid if + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. + * If the attribute is absent ("no preference"), the driver or firmware + * can choose a suitable value. + * @NL80211_PMSR_FTM_REQ_ATTR_PAD: ignore, for u64/s64 padding only. + * @NL80211_PMSR_FTM_REQ_ATTR_INGRESS: optional u64 attribute in units of mm. + * When specified, the measurement result of the peer needs to be + * indicated if the device moves into this range. + * @NL80211_PMSR_FTM_REQ_ATTR_EGRESS: optional u64 attribute in units of mm. + * When specified, the measurement result of the peer needs to be + * indicated if the device moves out of this range. + * If neither or only one of @NL80211_PMSR_FTM_REQ_ATTR_INGRESS and + * @NL80211_PMSR_FTM_REQ_ATTR_EGRESS is specified, only the specified + * threshold is used. If both are specified, both thresholds are applied. + * If neither is specified, results are reported without threshold + * filtering. + * @NL80211_PMSR_FTM_REQ_ATTR_PD_SUPPRESS_RESULTS: Flag to suppress ranging + * results for PD requests. When set, ranging measurements are performed + * but results are not reported to userspace, regardless of ranging role + * or type. Only valid when %NL80211_PMSR_PEER_ATTR_REQ_TYPE is set to + * %NL80211_PMSR_FTM_REQ_TYPE_PD. * * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number @@ -7853,6 +8441,16 @@ enum nl80211_peer_measurement_ftm_req { NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED, NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK, NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR, + NL80211_PMSR_FTM_REQ_ATTR_RSTA, + NL80211_PMSR_FTM_REQ_ATTR_MIN_TIME_BETWEEN_MEASUREMENTS, + NL80211_PMSR_FTM_REQ_ATTR_MAX_TIME_BETWEEN_MEASUREMENTS, + NL80211_PMSR_FTM_REQ_ATTR_NOMINAL_TIME, + NL80211_PMSR_FTM_REQ_ATTR_AW_DURATION, + NL80211_PMSR_FTM_REQ_ATTR_NUM_MEASUREMENTS, + NL80211_PMSR_FTM_REQ_ATTR_PAD, + NL80211_PMSR_FTM_REQ_ATTR_INGRESS, + NL80211_PMSR_FTM_REQ_ATTR_EGRESS, + NL80211_PMSR_FTM_REQ_ATTR_PD_SUPPRESS_RESULTS, /* keep last */ NUM_NL80211_PMSR_FTM_REQ_ATTR, @@ -7937,6 +8535,35 @@ enum nl80211_peer_measurement_ftm_failure_reasons { * 9.4.2.22.1) starting with the Measurement Token, with Measurement * Type 11. * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only + * @NL80211_PMSR_FTM_RESP_ATTR_BURST_PERIOD: actual burst period used by + * the responder (similar to request, u16) + * @NL80211_PMSR_FTM_RESP_ATTR_TX_LTF_REPETITION_COUNT: negotiated value of + * number of tx ltf repetitions in NDP frames (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_RX_LTF_REPETITION_COUNT: negotiated value of + * number of rx ltf repetitions in NDP frames (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_MAX_TIME_BETWEEN_MEASUREMENTS: negotiated value + * where latest time by which the ISTA needs to complete the next round of + * measurements, in units of 10 ms (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_MIN_TIME_BETWEEN_MEASUREMENTS: negotiated + * minimum time between two consecutive range measurements initiated by an + * ISTA, in units of 100 us (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_TX_SPATIAL_STREAMS: number of Tx space-time + * streams used in NDP frames during the measurement sounding phase + * (u32, optional). + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_RX_SPATIAL_STREAMS: number of Rx space-time + * streams used in the NDP frames during the measurement sounding phase + * (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_NOMINAL_TIME: negotiated nominal time used in + * this session in milliseconds. (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_AVAILABILITY_WINDOW: negotiated availability + * window time used in this session, in units of milli seconds. + * (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_CHANNEL_WIDTH: u32 attribute indicating channel + * width used for measurement, see &enum nl80211_chan_width (optional). + * @NL80211_PMSR_FTM_RESP_ATTR_PREAMBLE: u32 attribute indicating the preamble + * type used for the measurement, see &enum nl80211_preamble (optional). + * @NL80211_PMSR_FTM_RESP_ATTR_IS_DELAYED_LMR: flag, indicates if the + * current result is delayed LMR data. * * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number @@ -7965,6 +8592,18 @@ enum nl80211_peer_measurement_ftm_resp { NL80211_PMSR_FTM_RESP_ATTR_LCI, NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC, NL80211_PMSR_FTM_RESP_ATTR_PAD, + NL80211_PMSR_FTM_RESP_ATTR_BURST_PERIOD, + NL80211_PMSR_FTM_RESP_ATTR_TX_LTF_REPETITION_COUNT, + NL80211_PMSR_FTM_RESP_ATTR_RX_LTF_REPETITION_COUNT, + NL80211_PMSR_FTM_RESP_ATTR_MAX_TIME_BETWEEN_MEASUREMENTS, + NL80211_PMSR_FTM_RESP_ATTR_MIN_TIME_BETWEEN_MEASUREMENTS, + NL80211_PMSR_FTM_RESP_ATTR_NUM_TX_SPATIAL_STREAMS, + NL80211_PMSR_FTM_RESP_ATTR_NUM_RX_SPATIAL_STREAMS, + NL80211_PMSR_FTM_RESP_ATTR_NOMINAL_TIME, + NL80211_PMSR_FTM_RESP_ATTR_AVAILABILITY_WINDOW, + NL80211_PMSR_FTM_RESP_ATTR_CHANNEL_WIDTH, + NL80211_PMSR_FTM_RESP_ATTR_PREAMBLE, + NL80211_PMSR_FTM_RESP_ATTR_IS_DELAYED_LMR, /* keep last */ NUM_NL80211_PMSR_FTM_RESP_ATTR, @@ -8416,6 +9055,8 @@ enum nl80211_s1g_short_beacon_attrs { * @NL80211_NAN_CAPA_CAPABILITIES: u8 attribute containing the * capabilities of the device as defined in Wi-Fi Aware (TM) * specification Table 79 (Capabilities field). + * @NL80211_NAN_CAPA_PHY: nested attribute containing band-agnostic + * capabilities for NAN data path. See &enum nl80211_nan_phy_cap_attr. * @__NL80211_NAN_CAPABILITIES_LAST: Internal * @NL80211_NAN_CAPABILITIES_MAX: Highest NAN capability attribute. */ @@ -8428,9 +9069,38 @@ enum nl80211_nan_capabilities { NL80211_NAN_CAPA_NUM_ANTENNAS, NL80211_NAN_CAPA_MAX_CHANNEL_SWITCH_TIME, NL80211_NAN_CAPA_CAPABILITIES, + NL80211_NAN_CAPA_PHY, /* keep last */ __NL80211_NAN_CAPABILITIES_LAST, NL80211_NAN_CAPABILITIES_MAX = __NL80211_NAN_CAPABILITIES_LAST - 1, }; +/** + * enum nl80211_nan_peer_map_attrs - NAN peer schedule map attributes + * + * Nested attributes used within %NL80211_ATTR_NAN_PEER_MAPS to define + * individual peer schedule maps. + * + * @__NL80211_NAN_PEER_MAP_ATTR_INVALID: Invalid + * @NL80211_NAN_PEER_MAP_ATTR_MAP_ID: (u8) The map ID for this schedule map. + * @NL80211_NAN_PEER_MAP_ATTR_TIME_SLOTS: An array of u8 values with 32 cells. + * Each value maps a time slot to a channel index within the schedule's + * channel list (%NL80211_ATTR_NAN_CHANNEL attributes). + * %NL80211_NAN_SCHED_NOT_AVAIL_SLOT indicates unscheduled. + * @__NL80211_NAN_PEER_MAP_ATTR_LAST: Internal + * @NL80211_NAN_PEER_MAP_ATTR_MAX: Highest peer map attribute + */ +enum nl80211_nan_peer_map_attrs { + __NL80211_NAN_PEER_MAP_ATTR_INVALID, + + NL80211_NAN_PEER_MAP_ATTR_MAP_ID, + NL80211_NAN_PEER_MAP_ATTR_TIME_SLOTS, + + /* keep last */ + __NL80211_NAN_PEER_MAP_ATTR_LAST, + NL80211_NAN_PEER_MAP_ATTR_MAX = __NL80211_NAN_PEER_MAP_ATTR_LAST - 1, +}; + +#define NL80211_NAN_SCHED_NOT_AVAIL_SLOT 0xff + #endif /* __LINUX_NL80211_H */ |