diff options
Diffstat (limited to 'include/uapi/linux/nl80211.h')
| -rw-r--r-- | include/uapi/linux/nl80211.h | 115 |
1 files changed, 106 insertions, 9 deletions
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 020387d76412..b56a96f57bec 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -937,8 +937,8 @@ * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME * messages. Note that per PHY only one application may register. * - * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether - * No Acknowledgement Policy should be applied. + * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap (%NL80211_ATTR_TID_BITMAP) + * indicating for which TIDs No Acknowledgment Policy should be applied. * * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels * independently of the userspace SME, send this event indicating @@ -1383,6 +1383,13 @@ * from the device to perform an announced schedule update. See * %NL80211_ATTR_NAN_SCHED_DEFERRED for more details. * If not set, the schedule should be applied immediately. + * Setting a new schedule is always allowed and is never treated as an + * evacuation, even if it removes channels that were previously marked as + * non-evacuable with %NL80211_CMD_NAN_SET_NON_EVAC_CHANNELS. The + * non-evacuable marking is a per-channel property of the schedule: + * channels that remain in the new schedule keep their marking, channels + * that are removed simply lose it, and newly added channels are + * evacuable by default. * @NL80211_CMD_NAN_SCHED_UPDATE_DONE: Event sent to user space to notify that * a deferred local NAN schedule update (requested with * %NL80211_CMD_NAN_SET_LOCAL_SCHED and %NL80211_ATTR_NAN_SCHED_DEFERRED) @@ -1399,10 +1406,12 @@ * be provided. * Each peer channel must be compatible with at least one local channel * set by %NL80211_CMD_SET_LOCAL_NAN_SCHED. Different maps must not - * contain compatible channels. - * For single-radio devices (n_radio <= 1), different maps must not - * schedule the same time slot, as the device cannot operate on multiple - * channels simultaneously. + * contain compatible channels. Two maps may schedule the same time slot. + * The device decides at runtime which of the channels to follow. + * For example, the local schedule may place slot S on channel c1 while + * the peer advertises slot S on both c1 and c2. If the device is anyway + * on c2 during slot S (e.g. via the ULW mechanism for non-NAN activity), + * it may use slot S on c2 to communicate with the peer. * When updating an existing peer schedule, the full new schedule must be * provided - partial updates are not supported. The new schedule will * completely replace the previous one. @@ -1427,6 +1436,38 @@ * @NL80211_CMD_STOP_PD: Stop the PD operation, identified by * its %NL80211_ATTR_WDEV interface. * + * @NL80211_CMD_NAN_SET_NON_EVAC_CHANNELS: Set the list of NAN local schedule + * channels that must not be evacuated. NAN must be operational + * (%NL80211_CMD_START_NAN was executed) and a local schedule must have + * been set (%NL80211_CMD_NAN_SET_LOCAL_SCHED). The command carries zero + * or more nested %NL80211_ATTR_NAN_CHANNEL attributes, each identifying a + * channel (by its channel definition) of the current local schedule that + * must not be evacuated for concurrent operations. The provided list + * replaces the previous set of non-evacuable channels; channels of the + * current schedule that are not included become evacuable again. All + * provided channels must exist in the current local schedule, otherwise + * the command fails. This is used to protect channels carrying NDC or + * immutable schedules, whose evacuation would break existing NDP + * connections. + * The non-evacuable marking is a per-channel property of the current + * local schedule and only affects evacuation for concurrent operations; + * it does not prevent the schedule itself from being changed. Removing a + * channel from the schedule with %NL80211_CMD_NAN_SET_LOCAL_SCHED is a + * user-initiated change, not an evacuation, and is allowed even for a + * non-evacuable channel. Across a schedule update, channels that remain + * keep their non-evacuable marking, removed channels lose it, and newly + * added channels are evacuable by default; issue this command again to + * change the non-evacuable set. + * @NL80211_CMD_UPDATE_BEACON: Update the beacon and other templates of an AP + * interface, but only that. Same attributes as %NL80211_CMD_SET_BEACON, + * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL are required, + * configuration changes such as %NL80211_ATTR_FTM_RESPONDER rejected. + * This doesn't acquire the wiphy mutex internally, so it's faster, but + * cannot update any other configuration. + * For MLO a single link is set with %NL80211_ATTR_MLO_LINK_ID as usual + * and multiple can be nested in %NL80211_ATTR_MLO_LINKS but then the + * update isn't atomic if any failures happen. + * Only supported with %NL80211_EXT_FEATURE_UPDATE_BEACON. * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1705,6 +1746,10 @@ enum nl80211_commands { NL80211_CMD_START_PD, NL80211_CMD_STOP_PD, + NL80211_CMD_NAN_SET_NON_EVAC_CHANNELS, + + NL80211_CMD_UPDATE_BEACON, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -2288,8 +2333,8 @@ enum nl80211_commands { * abides to when initiating radiation on DFS channels. A country maps * to one DFS region. * - * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of - * up to 16 TIDs. + * @NL80211_ATTR_TID_BITMAP: A TID bitmap (u16) whose meaning depends + * on the command. * * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be * used by the drivers which has MLME in firmware and does not have support @@ -3185,6 +3230,19 @@ enum nl80211_commands { * The aggregated message always precedes the per-link messages for the * same station within a dump sequence. * + * @NL80211_ATTR_FRAME_NO_STA: Valid for @NL80211_CMD_FRAME to denote that + * the kernel had no station for a received frame or should not use a + * known station to transmit a frame. This is relevant to know whether + * MLD address translation happened or to disable it when sending a frame. + * + * @NL80211_ATTR_ASSOC_CIP: Enable Control Integrity Protocol for the + * association + * @NL80211_ATTR_CIP_CAPABILITIES: The Control Integrity Protocol for the + * station. + * + * @NL80211_ATTR_ASSOC_PROTECTED_TWT: Enable protected TWT for the association, + * requires protected TWT support (flag attribute) + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3429,7 +3487,7 @@ enum nl80211_attrs { NL80211_ATTR_DISABLE_HT, NL80211_ATTR_HT_CAPABILITY_MASK, - NL80211_ATTR_NOACK_MAP, + NL80211_ATTR_TID_BITMAP, NL80211_ATTR_INACTIVITY_TIMEOUT, @@ -3785,6 +3843,13 @@ enum nl80211_attrs { NL80211_ATTR_STA_DUMP_LINK_STATS, + NL80211_ATTR_FRAME_NO_STA, + + NL80211_ATTR_ASSOC_CIP, + NL80211_ATTR_CIP_CAPABILITIES, + + NL80211_ATTR_ASSOC_PROTECTED_TWT, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3800,6 +3865,7 @@ enum nl80211_attrs { #define NL80211_ATTR_CSA_C_OFF_BEACON NL80211_ATTR_CNTDWN_OFFS_BEACON #define NL80211_ATTR_CSA_C_OFF_PRESP NL80211_ATTR_CNTDWN_OFFS_PRESP #define NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS NL80211_ATTR_EXT_MLD_CAPA_AND_OPS +#define NL80211_ATTR_NOACK_MAP NL80211_ATTR_TID_BITMAP /* * Allow user space programs to use #ifdef on new attributes by defining them @@ -3934,6 +4000,7 @@ enum nl80211_iftype { * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a * previously added station into associated state * @NL80211_STA_FLAG_SPP_AMSDU: station supports SPP A-MSDUs + * @NL80211_STA_FLAG_CIP: station has Control Integrity Protocol (CIP) enabled * @NL80211_STA_FLAG_MAX: highest station flag number currently defined * @__NL80211_STA_FLAG_AFTER_LAST: internal use */ @@ -3947,6 +4014,7 @@ enum nl80211_sta_flags { NL80211_STA_FLAG_TDLS_PEER, NL80211_STA_FLAG_ASSOCIATED, NL80211_STA_FLAG_SPP_AMSDU, + NL80211_STA_FLAG_CIP, /* keep last */ __NL80211_STA_FLAG_AFTER_LAST, @@ -5778,12 +5846,16 @@ enum nl80211_auth_type { * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) + * @NL80211_KEYTYPE_CIGTK: Control Integrity Group Temporal Key + * The cipher is GMAC-256 but passed as GCMP-256, + * same as the pairwise key when used for CIP. * @NUM_NL80211_KEYTYPES: number of defined key types */ enum nl80211_key_type { NL80211_KEYTYPE_GROUP, NL80211_KEYTYPE_PAIRWISE, NL80211_KEYTYPE_PEERKEY, + NL80211_KEYTYPE_CIGTK, NUM_NL80211_KEYTYPES }; @@ -5900,6 +5972,9 @@ enum nl80211_key_attributes { * see &struct nl80211_txrate_eht * @NL80211_TXRATE_EHT_GI: configure EHT GI, (u8, see &enum nl80211_eht_gi) * @NL80211_TXRATE_EHT_LTF: configure EHT LTF, (u8, see &enum nl80211_eht_ltf) + * @NL80211_TXRATE_6GHZ_NON_HT_DUP: configure 6 GHz non-HT duplicate Beacon + * transmission. This flag is applicable only in Beacon TX rate setting + * and must be accompanied by a non-HT (legacy) Beacon rate. * @__NL80211_TXRATE_AFTER_LAST: internal * @NL80211_TXRATE_MAX: highest TX rate attribute */ @@ -5915,6 +5990,7 @@ enum nl80211_tx_rate_attributes { NL80211_TXRATE_EHT, NL80211_TXRATE_EHT_GI, NL80211_TXRATE_EHT_LTF, + NL80211_TXRATE_6GHZ_NON_HT_DUP, /* keep last */ __NL80211_TXRATE_AFTER_LAST, @@ -7110,6 +7186,13 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_PROBE_AP: Driver supports probing the associated AP * in STA mode using @NL80211_CMD_PROBE_PEER. * + * @NL80211_EXT_FEATURE_FAST_ROAM_OFFLOAD: Driver supports fast roaming + * offload in station mode, including Fast Transition or Opportunistic + * Key Caching. + * + * @NL80211_EXT_FEATURE_UPDATE_BEACON: Driver supports + * %NL80211_CMD_UPDATE_BEACON. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -7192,6 +7275,8 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_ROC_ADDR_FILTER, NL80211_EXT_FEATURE_SET_KEY_LTF_SEED, NL80211_EXT_FEATURE_PROBE_AP, + NL80211_EXT_FEATURE_FAST_ROAM_OFFLOAD, + NL80211_EXT_FEATURE_UPDATE_BEACON, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -7826,6 +7911,11 @@ enum nl80211_nan_band_conf_attributes { * the upcoming discovery window with * %NL80211_CMD_NAN_NEXT_DW_NOTIFICATION. * This is a flag attribute. + * @NL80211_NAN_CONF_INSTANT_COMM: If set, the NAN synchronization logic will + * start Instant Communication (IC) as defined in Chapter 13 of the + * Wi-Fi Aware Specification v4.0. + * %NL80211_NAN_CONF_DISCOVERY_BEACON_INTERVAL must be set as well. + * This is a flag attribute. * @NUM_NL80211_NAN_CONF_ATTR: Internal. * @NL80211_NAN_CONF_ATTR_MAX: Highest NAN configuration attribute. * @@ -7841,6 +7931,7 @@ enum nl80211_nan_conf_attributes { NL80211_NAN_CONF_SCAN_DWELL_TIME, NL80211_NAN_CONF_DISCOVERY_BEACON_INTERVAL, NL80211_NAN_CONF_NOTIFY_DW, + NL80211_NAN_CONF_INSTANT_COMM, /* keep last */ NUM_NL80211_NAN_CONF_ATTR, @@ -9057,6 +9148,11 @@ enum nl80211_s1g_short_beacon_attrs { * specification Table 79 (Capabilities field). * @NL80211_NAN_CAPA_PHY: nested attribute containing band-agnostic * capabilities for NAN data path. See &enum nl80211_nan_phy_cap_attr. + * @NL80211_NAN_CAPA_INSTANT_COMM: Flag attribute indicating that the device + * can switch to Instant Communication (IC) mode, as defined in Chapter 13 + * of the Wi-Fi Aware Specification v4.0. Can only be set if + * %NL80211_NAN_CAPA_CONFIGURABLE_SYNC is set. When IC is enabled, the IC + * schedule is expected to be configured by user space. * @__NL80211_NAN_CAPABILITIES_LAST: Internal * @NL80211_NAN_CAPABILITIES_MAX: Highest NAN capability attribute. */ @@ -9070,6 +9166,7 @@ enum nl80211_nan_capabilities { NL80211_NAN_CAPA_MAX_CHANNEL_SWITCH_TIME, NL80211_NAN_CAPA_CAPABILITIES, NL80211_NAN_CAPA_PHY, + NL80211_NAN_CAPA_INSTANT_COMM, /* keep last */ __NL80211_NAN_CAPABILITIES_LAST, NL80211_NAN_CAPABILITIES_MAX = __NL80211_NAN_CAPABILITIES_LAST - 1, |