3 files changed, 34 insertions, 29 deletions
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 762bf87c26a3..0f39fdcb2273 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -1490,8 +1490,8 @@ union bpf_attr {
  * 	Return
  * 		The return value depends on the result of the test, and can be:
  *
- *		* 0, if current task belongs to the cgroup2.
- *		* 1, if current task does not belong to the cgroup2.
+ *		* 1, if current task belongs to the cgroup2.
+ *		* 0, if current task does not belong to the cgroup2.
  * 		* A negative error code, if an error occurred.
  *
  * long bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags)
@@ -2163,8 +2163,8 @@ union bpf_attr {
  *
  * 			# sysctl kernel.perf_event_max_stack=<new value>
  * 	Return
- * 		A non-negative value equal to or less than *size* on success,
- * 		or a negative error in case of failure.
+ * 		The non-negative copied *buf* length equal to or less than
+ * 		*size* on success, or a negative error in case of failure.
  *
  * long bpf_skb_load_bytes_relative(const void *skb, u32 offset, void *to, u32 len, u32 start_header)
  * 	Description
@@ -3448,8 +3448,8 @@ union bpf_attr {
  *
  *			# sysctl kernel.perf_event_max_stack=<new value>
  *	Return
- *		A non-negative value equal to or less than *size* on success,
- *		or a negative error in case of failure.
+ * 		The non-negative copied *buf* length equal to or less than
+ * 		*size* on success, or a negative error in case of failure.
  *
  * long bpf_load_hdr_opt(struct bpf_sock_ops *skops, void *searchby_res, u32 len, u64 flags)
  *	Description
@@ -4180,7 +4180,8 @@ struct bpf_sock {
 	__u32 src_ip4;
 	__u32 src_ip6[4];
 	__u32 src_port;		/* host byte order */
-	__u32 dst_port;		/* network byte order */
+	__be16 dst_port;	/* network byte order */
+	__u16 :16;		/* zero padding */
 	__u32 dst_ip4;
 	__u32 dst_ip6[4];
 	__u32 state;
diff --git a/include/uapi/linux/can/isotp.h b/include/uapi/linux/can/isotp.h
index c55935b64ccc..590f8aea2b6d 100644
--- a/include/uapi/linux/can/isotp.h
+++ b/include/uapi/linux/can/isotp.h
@@ -137,20 +137,16 @@ struct can_isotp_ll_options {
 #define CAN_ISOTP_WAIT_TX_DONE	0x400	/* wait for tx completion */
 #define CAN_ISOTP_SF_BROADCAST	0x800	/* 1-to-N functional addressing */
 
-/* default values */
+/* protocol machine default values */
 
 #define CAN_ISOTP_DEFAULT_FLAGS		0
 #define CAN_ISOTP_DEFAULT_EXT_ADDRESS	0x00
 #define CAN_ISOTP_DEFAULT_PAD_CONTENT	0xCC /* prevent bit-stuffing */
-#define CAN_ISOTP_DEFAULT_FRAME_TXTIME	0
+#define CAN_ISOTP_DEFAULT_FRAME_TXTIME	50000 /* 50 micro seconds */
 #define CAN_ISOTP_DEFAULT_RECV_BS	0
 #define CAN_ISOTP_DEFAULT_RECV_STMIN	0x00
 #define CAN_ISOTP_DEFAULT_RECV_WFTMAX	0
 
-#define CAN_ISOTP_DEFAULT_LL_MTU	CAN_MTU
-#define CAN_ISOTP_DEFAULT_LL_TX_DL	CAN_MAX_DLEN
-#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS	0
-
 /*
  * Remark on CAN_ISOTP_DEFAULT_RECV_* values:
  *
@@ -162,4 +158,24 @@ struct can_isotp_ll_options {
  * consistency and copied directly into the flow control (FC) frame.
  */
 
+/* link layer default values => make use of Classical CAN frames */
+
+#define CAN_ISOTP_DEFAULT_LL_MTU	CAN_MTU
+#define CAN_ISOTP_DEFAULT_LL_TX_DL	CAN_MAX_DLEN
+#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS	0
+
+/*
+ * The CAN_ISOTP_DEFAULT_FRAME_TXTIME has become a non-zero value as
+ * it only makes sense for isotp implementation tests to run without
+ * a N_As value. As user space applications usually do not set the
+ * frame_txtime element of struct can_isotp_options the new in-kernel
+ * default is very likely overwritten with zero when the sockopt()
+ * CAN_ISOTP_OPTS is invoked.
+ * To make sure that a N_As value of zero is only set intentional the
+ * value '0' is now interpreted as 'do not change the current value'.
+ * When a frame_txtime of zero is required for testing purposes this
+ * CAN_ISOTP_FRAME_TXTIME_ZERO u32 value has to be set in frame_txtime.
+ */
+#define CAN_ISOTP_FRAME_TXTIME_ZERO	0xFFFFFFFF
+
 #endif /* !_UAPI_CAN_ISOTP_H */
diff --git a/include/uapi/linux/rseq.h b/include/uapi/linux/rseq.h
index 9a402fdb60e9..77ee207623a9 100644
--- a/include/uapi/linux/rseq.h
+++ b/include/uapi/linux/rseq.h
@@ -105,23 +105,11 @@ struct rseq {
 	 * Read and set by the kernel. Set by user-space with single-copy
 	 * atomicity semantics. This field should only be updated by the
 	 * thread which registered this data structure. Aligned on 64-bit.
+	 *
+	 * 32-bit architectures should update the low order bits of the
+	 * rseq_cs field, leaving the high order bits initialized to 0.
 	 */
-	union {
-		__u64 ptr64;
-#ifdef __LP64__
-		__u64 ptr;
-#else
-		struct {
-#if (defined(__BYTE_ORDER) && (__BYTE_ORDER == __BIG_ENDIAN)) || defined(__BIG_ENDIAN)
-			__u32 padding;		/* Initialized to zero. */
-			__u32 ptr32;
-#else /* LITTLE */
-			__u32 ptr32;
-			__u32 padding;		/* Initialized to zero. */
-#endif /* ENDIAN */
-		} ptr;
-#endif
-	} rseq_cs;
+	__u64 rseq_cs;
 
 	/*
 	 * Restartable sequences flags field.