diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/ieee80211.h | 26 | ||||
| -rw-r--r-- | include/net/cfg80211.h | 150 | ||||
| -rw-r--r-- | include/net/ieee80211_radiotap.h | 4 | ||||
| -rw-r--r-- | include/net/mac80211.h | 19 | ||||
| -rw-r--r-- | include/uapi/linux/nl80211.h | 69 |
5 files changed, 224 insertions, 44 deletions
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index a80516fd65c8..fe849329511a 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1576,6 +1576,9 @@ struct ieee80211_vht_operation { #define WLAN_AUTH_SHARED_KEY 1 #define WLAN_AUTH_FT 2 #define WLAN_AUTH_SAE 3 +#define WLAN_AUTH_FILS_SK 4 +#define WLAN_AUTH_FILS_SK_PFS 5 +#define WLAN_AUTH_FILS_PK 6 #define WLAN_AUTH_LEAP 128 #define WLAN_AUTH_CHALLENGE_LEN 128 @@ -1960,6 +1963,26 @@ enum ieee80211_eid { WLAN_EID_VENDOR_SPECIFIC = 221, WLAN_EID_QOS_PARAMETER = 222, + WLAN_EID_CAG_NUMBER = 237, + WLAN_EID_AP_CSN = 239, + WLAN_EID_FILS_INDICATION = 240, + WLAN_EID_DILS = 241, + WLAN_EID_FRAGMENT = 242, + WLAN_EID_EXTENSION = 255 +}; + +/* Element ID Extensions for Element ID 255 */ +enum ieee80211_eid_ext { + WLAN_EID_EXT_ASSOC_DELAY_INFO = 1, + WLAN_EID_EXT_FILS_REQ_PARAMS = 2, + WLAN_EID_EXT_FILS_KEY_CONFIRM = 3, + WLAN_EID_EXT_FILS_SESSION = 4, + WLAN_EID_EXT_FILS_HLP_CONTAINER = 5, + WLAN_EID_EXT_FILS_IP_ADDR_ASSIGN = 6, + WLAN_EID_EXT_KEY_DELIVERY = 7, + WLAN_EID_EXT_FILS_WRAPPED_DATA = 8, + WLAN_EID_EXT_FILS_PUBLIC_KEY = 12, + WLAN_EID_EXT_FILS_NONCE = 13, }; /* Action category code */ @@ -2073,6 +2096,9 @@ enum ieee80211_key_len { #define IEEE80211_GCMP_MIC_LEN 16 #define IEEE80211_GCMP_PN_LEN 6 +#define FILS_NONCE_LEN 16 +#define FILS_MAX_KEK_LEN 64 + /* Public action codes */ enum ieee80211_pub_actioncode { WLAN_PUB_ACTION_EXT_CHANSW_ANN = 4, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index fe78f02a242e..c575583b50fb 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -772,6 +772,30 @@ struct cfg80211_csa_settings { }; /** + * struct iface_combination_params - input parameters for interface combinations + * + * Used to pass interface combination parameters + * + * @num_different_channels: the number of different channels we want + * to use for verification + * @radar_detect: a bitmap where each bit corresponds to a channel + * width where radar detection is needed, as in the definition of + * &struct ieee80211_iface_combination.@radar_detect_widths + * @iftype_num: array with the number of interfaces of each interface + * type. The index is the interface type as specified in &enum + * nl80211_iftype. + * @new_beacon_int: set this to the beacon interval of a new interface + * that's not operating yet, if such is to be checked as part of + * the verification + */ +struct iface_combination_params { + int num_different_channels; + u8 radar_detect; + int iftype_num[NUM_NL80211_IFTYPES]; + u32 new_beacon_int; +}; + +/** * enum station_parameters_apply_mask - station parameter values to apply * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp) * @STATION_PARAM_APPLY_CAPABILITY: apply new capability @@ -1761,9 +1785,11 @@ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); * @key_len: length of WEP key for shared key authentication * @key_idx: index of WEP key for shared key authentication * @key: WEP key for shared key authentication - * @sae_data: Non-IE data to use with SAE or %NULL. This starts with - * Authentication transaction sequence number field. - * @sae_data_len: Length of sae_data buffer in octets + * @auth_data: Fields and elements in Authentication frames. This contains + * the authentication frame body (non-IE and IE data), excluding the + * Authentication algorithm number, i.e., starting at the Authentication + * transaction sequence number field. + * @auth_data_len: Length of auth_data buffer in octets */ struct cfg80211_auth_request { struct cfg80211_bss *bss; @@ -1772,8 +1798,8 @@ struct cfg80211_auth_request { enum nl80211_auth_type auth_type; const u8 *key; u8 key_len, key_idx; - const u8 *sae_data; - size_t sae_data_len; + const u8 *auth_data; + size_t auth_data_len; }; /** @@ -1814,6 +1840,12 @@ enum cfg80211_assoc_req_flags { * @ht_capa_mask: The bits of ht_capa which are to be used. * @vht_capa: VHT capability override * @vht_capa_mask: VHT capability mask indicating which fields to use + * @fils_kek: FILS KEK for protecting (Re)Association Request/Response frame or + * %NULL if FILS is not used. + * @fils_kek_len: Length of fils_kek in octets + * @fils_nonces: FILS nonces (part of AAD) for protecting (Re)Association + * Request/Response frame or %NULL if FILS is not used. This field starts + * with 16 octets of STA Nonce followed by 16 octets of AP Nonce. */ struct cfg80211_assoc_request { struct cfg80211_bss *bss; @@ -1825,6 +1857,9 @@ struct cfg80211_assoc_request { struct ieee80211_ht_cap ht_capa; struct ieee80211_ht_cap ht_capa_mask; struct ieee80211_vht_cap vht_capa, vht_capa_mask; + const u8 *fils_kek; + size_t fils_kek_len; + const u8 *fils_nonces; }; /** @@ -2016,6 +2051,18 @@ struct cfg80211_connect_params { }; /** + * enum cfg80211_connect_params_changed - Connection parameters being updated + * + * This enum provides information of all connect parameters that + * have to be updated as part of update_connect_params() call. + * + * @UPDATE_ASSOC_IES: Indicates whether association request IEs are updated + */ +enum cfg80211_connect_params_changed { + UPDATE_ASSOC_IES = BIT(0), +}; + +/** * enum wiphy_params_flags - set_wiphy_params bitfield values * @WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed * @WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed @@ -2536,9 +2583,18 @@ struct cfg80211_nan_func { * cases, the result of roaming is indicated with a call to * cfg80211_roamed() or cfg80211_roamed_bss(). * (invoked with the wireless_dev mutex held) - * @disconnect: Disconnect from the BSS/ESS. Once done, call - * cfg80211_disconnected(). + * @update_connect_params: Update the connect parameters while connected to a + * BSS. The updated parameters can be used by driver/firmware for + * subsequent BSS selection (roaming) decisions and to form the + * Authentication/(Re)Association Request frames. This call does not + * request an immediate disassociation or reassociation with the current + * BSS, i.e., this impacts only subsequent (re)associations. The bits in + * changed are defined in &enum cfg80211_connect_params_changed. * (invoked with the wireless_dev mutex held) + * @disconnect: Disconnect from the BSS/ESS or stop connection attempts if + * connection is in progress. Once done, call cfg80211_disconnected() in + * case connection was already established (invoked with the + * wireless_dev mutex held), otherwise call cfg80211_connect_timeout(). * * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call * cfg80211_ibss_joined(), also call that function when changing BSSID due @@ -2706,6 +2762,8 @@ struct cfg80211_nan_func { * @nan_change_conf: changes NAN configuration. The changed parameters must * be specified in @changes (using &enum cfg80211_nan_conf_changes); * All other parameters must be ignored. + * + * @set_multicast_to_unicast: configure multicast to unicast conversion for BSS */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2820,6 +2878,10 @@ struct cfg80211_ops { int (*connect)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_connect_params *sme); + int (*update_connect_params)(struct wiphy *wiphy, + struct net_device *dev, + struct cfg80211_connect_params *sme, + u32 changed); int (*disconnect)(struct wiphy *wiphy, struct net_device *dev, u16 reason_code); @@ -2982,6 +3044,10 @@ struct cfg80211_ops { struct wireless_dev *wdev, struct cfg80211_nan_conf *conf, u32 changes); + + int (*set_multicast_to_unicast)(struct wiphy *wiphy, + struct net_device *dev, + const bool enabled); }; /* @@ -3080,6 +3146,12 @@ struct ieee80211_iface_limit { * only in special cases. * @radar_detect_widths: bitmap of channel widths supported for radar detection * @radar_detect_regions: bitmap of regions supported for radar detection + * @beacon_int_min_gcd: This interface combination supports different + * beacon intervals. + * = 0 - all beacon intervals for different interface must be same. + * > 0 - any beacon interval for the interface part of this combination AND + * *GCD* of all beacon intervals from beaconing interfaces of this + * combination must be greater or equal to this value. * * With this structure the driver can describe which interface * combinations it supports concurrently. @@ -3138,6 +3210,7 @@ struct ieee80211_iface_combination { bool beacon_int_infra_match; u8 radar_detect_widths; u8 radar_detect_regions; + u32 beacon_int_min_gcd; }; struct ieee80211_txrx_stypes { @@ -3745,8 +3818,8 @@ struct cfg80211_cached_keys; * @beacon_interval: beacon interval used on this device for transmitting * beacons, 0 when not valid * @address: The address for this device, valid only if @netdev is %NULL - * @p2p_started: true if this is a P2P Device that has been started - * @nan_started: true if this is a NAN interface that has been started + * @is_running: true if this is a non-netdev device that has been started, e.g. + * the P2P Device. * @cac_started: true if DFS channel availability check has been started * @cac_start_time: timestamp (jiffies) when the dfs state was entered. * @cac_time_ms: CAC time in ms @@ -3778,7 +3851,7 @@ struct wireless_dev { struct mutex mtx; - bool use_4addr, p2p_started, nan_started; + bool use_4addr, is_running; u8 address[ETH_ALEN] __aligned(sizeof(u16)); @@ -3835,6 +3908,13 @@ static inline u8 *wdev_address(struct wireless_dev *wdev) return wdev->address; } +static inline bool wdev_running(struct wireless_dev *wdev) +{ + if (wdev->netdev) + return netif_running(wdev->netdev); + return wdev->is_running; +} + /** * wdev_priv - return wiphy priv from wireless_dev * @@ -4140,6 +4220,27 @@ static inline const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len) } /** + * cfg80211_find_ext_ie - find information element with EID Extension in data + * + * @ext_eid: element ID Extension + * @ies: data consisting of IEs + * @len: length of data + * + * Return: %NULL if the extended element ID could not be found or if + * the element is invalid (claims to be longer than the given + * data), or a pointer to the first byte of the requested + * element, that is the byte containing the element ID. + * + * Note: There are no checks on the element length other than + * having to fit into the given data. + */ +static inline const u8 *cfg80211_find_ext_ie(u8 ext_eid, const u8 *ies, int len) +{ + return cfg80211_find_ie_match(WLAN_EID_EXTENSION, ies, len, + &ext_eid, 1, 2); +} + +/** * cfg80211_find_vendor_ie - find vendor specific information element in data * * @oui: vendor OUI @@ -4539,7 +4640,8 @@ void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr); * moves to cfg80211 in this call * @buf: authentication frame (header + body) * @len: length of the frame data - * @uapsd_queues: bitmap of ACs configured to uapsd. -1 if n/a. + * @uapsd_queues: bitmap of queues configured for uapsd. Same format + * as the AC bitmap in the QoS info field * * After being asked to associate via cfg80211_ops::assoc() the driver must * call either this function or cfg80211_auth_timeout(). @@ -5575,36 +5677,20 @@ unsigned int ieee80211_get_num_supported_channels(struct wiphy *wiphy); * cfg80211_check_combinations - check interface combinations * * @wiphy: the wiphy - * @num_different_channels: the number of different channels we want - * to use for verification - * @radar_detect: a bitmap where each bit corresponds to a channel - * width where radar detection is needed, as in the definition of - * &struct ieee80211_iface_combination.@radar_detect_widths - * @iftype_num: array with the numbers of interfaces of each interface - * type. The index is the interface type as specified in &enum - * nl80211_iftype. + * @params: the interface combinations parameter * * This function can be called by the driver to check whether a * combination of interfaces and their types are allowed according to * the interface combinations. */ int cfg80211_check_combinations(struct wiphy *wiphy, - const int num_different_channels, - const u8 radar_detect, - const int iftype_num[NUM_NL80211_IFTYPES]); + struct iface_combination_params *params); /** * cfg80211_iter_combinations - iterate over matching combinations * * @wiphy: the wiphy - * @num_different_channels: the number of different channels we want - * to use for verification - * @radar_detect: a bitmap where each bit corresponds to a channel - * width where radar detection is needed, as in the definition of - * &struct ieee80211_iface_combination.@radar_detect_widths - * @iftype_num: array with the numbers of interfaces of each interface - * type. The index is the interface type as specified in &enum - * nl80211_iftype. + * @params: the interface combinations parameter * @iter: function to call for each matching combination * @data: pointer to pass to iter function * @@ -5613,9 +5699,7 @@ int cfg80211_check_combinations(struct wiphy *wiphy, * purposes. */ int cfg80211_iter_combinations(struct wiphy *wiphy, - const int num_different_channels, - const u8 radar_detect, - const int iftype_num[NUM_NL80211_IFTYPES], + struct iface_combination_params *params, void (*iter)(const struct ieee80211_iface_combination *c, void *data), void *data); diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h index ba07b9d8ed63..d0e7e3f8e67a 100644 --- a/include/net/ieee80211_radiotap.h +++ b/include/net/ieee80211_radiotap.h @@ -333,9 +333,9 @@ enum ieee80211_radiotap_type { #define IEEE80211_RADIOTAP_TIMESTAMP_UNIT_NS 0x0003 #define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_MASK 0x00F0 #define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_BEGIN_MDPU 0x0000 -#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_EO_MPDU 0x0010 +#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_PLCP_SIG_ACQ 0x0010 #define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_EO_PPDU 0x0020 -#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_PLCP_SIG_ACQ 0x0030 +#define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_EO_MPDU 0x0030 #define IEEE80211_RADIOTAP_TIMESTAMP_SPOS_UNKNOWN 0x00F0 #define IEEE80211_RADIOTAP_TIMESTAMP_FLAG_64BIT 0x00 diff --git a/include/net/mac80211.h b/include/net/mac80211.h index a810dfcb83c2..b9b24abd9103 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1438,7 +1438,7 @@ enum ieee80211_vif_flags { struct ieee80211_vif { enum nl80211_iftype type; struct ieee80211_bss_conf bss_conf; - u8 addr[ETH_ALEN]; + u8 addr[ETH_ALEN] __aligned(2); bool p2p; bool csa_active; bool mu_mimo_owner; @@ -1745,7 +1745,8 @@ struct ieee80211_sta_rates { * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *), size is determined in hw information. * @uapsd_queues: bitmap of queues configured for uapsd. Only valid - * if wme is supported. + * if wme is supported. The bits order is like in + * IEEE80211_WMM_IE_STA_QOSINFO_AC_*. * @max_sp: max Service Period. Only valid if wme is supported. * @bandwidth: current bandwidth the station can receive with * @rx_nss: in HT/VHT, the maximum number of spatial streams the @@ -2025,6 +2026,10 @@ struct ieee80211_txq { * drivers, mac80211 packet loss mechanism will not be triggered and driver * is completely depending on firmware event for station kickout. * + * @IEEE80211_HW_SUPPORTS_TX_FRAG: Hardware does fragmentation by itself. + * The stack will not do fragmentation. + * The callback for @set_frag_threshold should be set as well. + * * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays */ enum ieee80211_hw_flags { @@ -2066,6 +2071,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_TX_AMSDU, IEEE80211_HW_TX_FRAG_LIST, IEEE80211_HW_REPORTS_LOW_ACK, + IEEE80211_HW_SUPPORTS_TX_FRAG, /* keep last, obviously */ NUM_IEEE80211_HW_FLAGS @@ -3093,8 +3099,9 @@ enum ieee80211_reconfig_type { * The callback must be atomic. * * @set_frag_threshold: Configuration of fragmentation threshold. Assign this - * if the device does fragmentation by itself; if this callback is - * implemented then the stack will not do fragmentation. + * if the device does fragmentation by itself. Note that to prevent the + * stack from doing fragmentation IEEE80211_HW_SUPPORTS_TX_FRAG + * should be set as well. * The callback can sleep. * * @set_rts_threshold: Configuration of RTS threshold (if device needs it) @@ -4087,6 +4094,10 @@ void ieee80211_sta_pspoll(struct ieee80211_sta *sta); * This must be used in conjunction with ieee80211_sta_ps_transition() * and possibly ieee80211_sta_pspoll(); calls to all three must be * serialized. + * %IEEE80211_NUM_TIDS can be passed as the tid if the tid is unknown. + * In this case, mac80211 will not check that this tid maps to an AC + * that is trigger enabled and assume that the caller did the proper + * checks. */ void ieee80211_sta_uapsd_trigger(struct ieee80211_sta *sta, u8 tid); diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 56368e9b4622..259c9c77fdc1 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -600,6 +600,20 @@ * * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface. * + * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform + * multicast to unicast conversion. When enabled, all multicast packets + * with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header) + * will be sent out to each station once with the destination (multicast) + * MAC address replaced by the station's MAC address. Note that this may + * break certain expectations of the receiver, e.g. the ability to drop + * unicast IP packets encapsulated in multicast L2 frames, or the ability + * to not send destination unreachable messages in such cases. + * This can only be toggled per BSS. Configure this on an interface of + * type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces + * (%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode. + * If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this + * command, the feature is disabled. + * * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial * mesh config parameters may be given. * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the @@ -874,6 +888,12 @@ * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and * %NL80211_ATTR_COOKIE. * + * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters + * for subsequent roaming cases if the driver or firmware uses internal + * BSS selection. This command can be issued only while connected and it + * does not result in a change for the current association. Currently, + * only the %NL80211_ATTR_IE data is used and updated with this command. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1069,6 +1089,10 @@ enum nl80211_commands { NL80211_CMD_CHANGE_NAN_CONFIG, NL80211_CMD_NAN_MATCH, + NL80211_CMD_SET_MULTICAST_TO_UNICAST, + + NL80211_CMD_UPDATE_CONNECT_PARAMS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1638,8 +1662,16 @@ enum nl80211_commands { * the connection request from a station. nl80211_connect_failed_reason * enum has different reasons of connection failure. * - * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts - * with the Authentication transaction sequence number field. + * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames. + * This contains the authentication frame body (non-IE and IE data), + * excluding the Authentication algorithm number, i.e., starting at the + * Authentication transaction sequence number field. It is used with + * authentication algorithms that need special fields to be added into + * the frames (SAE and FILS). Currently, only the SAE cases use the + * initial two fields (Authentication transaction sequence number and + * Status code). However, those fields are included in the attribute data + * for all authentication algorithms to keep the attribute definition + * consistent. * * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from * association request when used with NL80211_CMD_NEW_STATION) @@ -1936,6 +1968,14 @@ enum nl80211_commands { * attribute. * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute. * See &enum nl80211_nan_match_attributes. + * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame + * protection. + * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association + * Request/Response frame protection. This attribute contains the 16 octet + * STA Nonce followed by 16 octets of AP Nonce. + * + * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast + * packets should be send out as unicast to all stations (flag attribute). * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined @@ -2195,7 +2235,7 @@ enum nl80211_attrs { NL80211_ATTR_CONN_FAILED_REASON, - NL80211_ATTR_SAE_DATA, + NL80211_ATTR_AUTH_DATA, NL80211_ATTR_VHT_CAPABILITY, @@ -2336,6 +2376,11 @@ enum nl80211_attrs { NL80211_ATTR_NAN_FUNC, NL80211_ATTR_NAN_MATCH, + NL80211_ATTR_FILS_KEK, + NL80211_ATTR_FILS_NONCES, + + NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2347,6 +2392,7 @@ enum nl80211_attrs { #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG #define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER +#define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA /* * Allow user space programs to use #ifdef on new attributes by defining them @@ -3660,6 +3706,9 @@ enum nl80211_bss_status { * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals + * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key + * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS + * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key * @__NL80211_AUTHTYPE_NUM: internal * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by @@ -3672,6 +3721,9 @@ enum nl80211_auth_type { NL80211_AUTHTYPE_FT, NL80211_AUTHTYPE_NETWORK_EAP, NL80211_AUTHTYPE_SAE, + NL80211_AUTHTYPE_FILS_SK, + NL80211_AUTHTYPE_FILS_SK_PFS, + NL80211_AUTHTYPE_FILS_PK, /* keep last */ __NL80211_AUTHTYPE_NUM, @@ -4280,6 +4332,9 @@ enum nl80211_iface_limit_attrs { * of supported channel widths for radar detection. * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap * of supported regulatory regions for radar detection. + * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of + * different beacon intervals supported by all the interface combinations + * in this group (if not present, all beacon intervals be identical). * @NUM_NL80211_IFACE_COMB: number of attributes * @MAX_NL80211_IFACE_COMB: highest attribute number * @@ -4287,8 +4342,8 @@ enum nl80211_iface_limit_attrs { * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2 * => allows an AP and a STA that must match BIs * - * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8 - * => allows 8 of AP/GO + * numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8, + * => allows 8 of AP/GO that can have BI gcd >= min gcd * * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 * => allows two STAs on different channels @@ -4314,6 +4369,7 @@ enum nl80211_if_combination_attrs { NL80211_IFACE_COMB_NUM_CHANNELS, NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, NL80211_IFACE_COMB_RADAR_DETECT_REGIONS, + NL80211_IFACE_COMB_BI_MIN_GCD, /* keep last */ NUM_NL80211_IFACE_COMB, @@ -4634,6 +4690,8 @@ enum nl80211_feature_flags { * configuration (AP/mesh) with HT rates. * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate * configuration (AP/mesh) with VHT rates. + * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup + * with user space SME (NL80211_CMD_AUTHENTICATE) in station mode. * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. @@ -4648,6 +4706,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, NL80211_EXT_FEATURE_BEACON_RATE_HT, NL80211_EXT_FEATURE_BEACON_RATE_VHT, + NL80211_EXT_FEATURE_FILS_STA, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, |