diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/ieee80211.h | 77 | ||||
| -rw-r--r-- | include/linux/skbuff.h | 3 | ||||
| -rw-r--r-- | include/net/cfg80211.h | 44 | ||||
| -rw-r--r-- | include/net/mac80211.h | 25 | ||||
| -rw-r--r-- | include/net/sock.h | 2 | ||||
| -rw-r--r-- | include/uapi/linux/nl80211.h | 6 |
6 files changed, 96 insertions, 61 deletions
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 508d466de1cc..15a87f522017 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -4087,6 +4087,9 @@ enum ieee80211_tdls_actioncode { /* Defines support for enhanced multi-bssid advertisement*/ #define WLAN_EXT_CAPA11_EMA_SUPPORT BIT(3) +/* Enable Beacon Protection */ +#define WLAN_EXT_CAPA11_BCN_PROTECT BIT(4) + /* TDLS specific payload type in the LLC/SNAP header */ #define WLAN_TDLS_SNAP_RFTYPE 0x2 @@ -5615,6 +5618,80 @@ static inline bool ieee80211_tid_to_link_map_size_ok(const u8 *data, size_t len) return len >= fixed + elem_len; } +/** + * ieee80211_emlsr_pad_delay_in_us - Fetch the EMLSR Padding delay + * in microseconds + * @eml_cap: EML capabilities field value from common info field of + * the Multi-link element + * Return: the EMLSR Padding delay (in microseconds) encoded in the + * EML Capabilities field + */ + +static inline u32 ieee80211_emlsr_pad_delay_in_us(u16 eml_cap) +{ + /* IEEE Std 802.11be-2024 Table 9-417i—Encoding of the EMLSR + * Padding Delay subfield. + */ + u32 pad_delay = u16_get_bits(eml_cap, + IEEE80211_EML_CAP_EMLSR_PADDING_DELAY); + + if (!pad_delay || + pad_delay > IEEE80211_EML_CAP_EMLSR_PADDING_DELAY_256US) + return 0; + + return 32 * (1 << (pad_delay - 1)); +} + +/** + * ieee80211_emlsr_trans_delay_in_us - Fetch the EMLSR Transition + * delay in microseconds + * @eml_cap: EML capabilities field value from common info field of + * the Multi-link element + * Return: the EMLSR Transition delay (in microseconds) encoded in the + * EML Capabilities field + */ + +static inline u32 ieee80211_emlsr_trans_delay_in_us(u16 eml_cap) +{ + /* IEEE Std 802.11be-2024 Table 9-417j—Encoding of the EMLSR + * Transition Delay subfield. + */ + u32 trans_delay = + u16_get_bits(eml_cap, + IEEE80211_EML_CAP_EMLSR_TRANSITION_DELAY); + + /* invalid values also just use 0 */ + if (!trans_delay || + trans_delay > IEEE80211_EML_CAP_EMLSR_TRANSITION_DELAY_256US) + return 0; + + return 16 * (1 << (trans_delay - 1)); +} + +/** + * ieee80211_eml_trans_timeout_in_us - Fetch the EMLSR Transition + * timeout value in microseconds + * @eml_cap: EML capabilities field value from common info field of + * the Multi-link element + * Return: the EMLSR Transition timeout (in microseconds) encoded in + * the EML Capabilities field + */ + +static inline u32 ieee80211_eml_trans_timeout_in_us(u16 eml_cap) +{ + /* IEEE Std 802.11be-2024 Table 9-417m—Encoding of the + * Transition Timeout subfield. + */ + u8 timeout = u16_get_bits(eml_cap, + IEEE80211_EML_CAP_TRANSITION_TIMEOUT); + + /* invalid values also just use 0 */ + if (!timeout || timeout > IEEE80211_EML_CAP_TRANSITION_TIMEOUT_128TU) + return 0; + + return 128 * (1 << (timeout - 1)); +} + #define for_each_mle_subelement(_elem, _data, _len) \ if (ieee80211_mle_size_ok(_data, _len)) \ for_each_element(_elem, \ diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index beb084ee4f4d..f3e72be6f634 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -481,9 +481,6 @@ enum { /* generate software time stamp on packet tx completion */ SKBTX_COMPLETION_TSTAMP = 1 << 3, - /* generate wifi status information (where possible) */ - SKBTX_WIFI_STATUS = 1 << 4, - /* determine hardware time stamp based on time or cycles */ SKBTX_HW_TSTAMP_NETDEV = 1 << 5, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index efbd79c67be2..d1848dc8ec99 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1097,43 +1097,6 @@ int cfg80211_chandef_primary(const struct cfg80211_chan_def *chandef, int nl80211_send_chandef(struct sk_buff *msg, const struct cfg80211_chan_def *chandef); /** - * ieee80211_chanwidth_rate_flags - return rate flags for channel width - * @width: the channel width of the channel - * - * In some channel types, not all rates may be used - for example CCK - * rates may not be used in 5/10 MHz channels. - * - * Returns: rate flags which apply for this channel width - */ -static inline enum ieee80211_rate_flags -ieee80211_chanwidth_rate_flags(enum nl80211_chan_width width) -{ - switch (width) { - case NL80211_CHAN_WIDTH_5: - return IEEE80211_RATE_SUPPORTS_5MHZ; - case NL80211_CHAN_WIDTH_10: - return IEEE80211_RATE_SUPPORTS_10MHZ; - default: - break; - } - return 0; -} - -/** - * ieee80211_chandef_rate_flags - returns rate flags for a channel - * @chandef: channel definition for the channel - * - * See ieee80211_chanwidth_rate_flags(). - * - * Returns: rate flags which apply for this channel - */ -static inline enum ieee80211_rate_flags -ieee80211_chandef_rate_flags(struct cfg80211_chan_def *chandef) -{ - return ieee80211_chanwidth_rate_flags(chandef->width); -} - -/** * ieee80211_chandef_max_power - maximum transmission power for the chandef * * In some regulations, the transmit power may depend on the configured channel @@ -1300,11 +1263,13 @@ struct cfg80211_crypto_settings { * struct cfg80211_mbssid_config - AP settings for multi bssid * * @tx_wdev: pointer to the transmitted interface in the MBSSID set + * @tx_link_id: link ID of the transmitted profile in an MLD. * @index: index of this AP in the multi bssid group. * @ema: set to true if the beacons should be sent out in EMA mode. */ struct cfg80211_mbssid_config { struct wireless_dev *tx_wdev; + u8 tx_link_id; u8 index; bool ema; }; @@ -1770,6 +1735,9 @@ struct cfg80211_ttlm_params { * @supported_oper_classes_len: number of supported operating classes * @support_p2p_ps: information if station supports P2P PS mechanism * @airtime_weight: airtime scheduler weight for this station + * @eml_cap_present: Specifies if EML capabilities field (@eml_cap) is + * present/updated + * @eml_cap: EML capabilities of this station * @link_sta_params: link related params. */ struct station_parameters { @@ -1794,6 +1762,8 @@ struct station_parameters { u8 supported_oper_classes_len; int support_p2p_ps; u16 airtime_weight; + bool eml_cap_present; + u16 eml_cap; struct link_station_parameters link_sta_params; }; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index c498f685d01f..fdafc37d17cc 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -682,6 +682,9 @@ struct ieee80211_parsed_tpe { * responder functionality. * @ftmr_params: configurable lci/civic parameter when enabling FTM responder. * @nontransmitted: this BSS is a nontransmitted BSS profile + * @tx_bss_conf: Pointer to the BSS configuration of transmitting interface + * if MBSSID is enabled. This pointer is RCU-protected due to CSA finish + * and BSS color change flows accessing it. * @transmitter_bssid: the address of transmitter AP * @bssid_index: index inside the multiple BSSID set * @bssid_indicator: 2^bssid_indicator is the maximum number of APs in set @@ -804,6 +807,7 @@ struct ieee80211_bss_conf { struct ieee80211_ftm_responder_params *ftmr_params; /* Multiple BSSID data */ bool nontransmitted; + struct ieee80211_bss_conf __rcu *tx_bss_conf; u8 transmitter_bssid[ETH_ALEN]; u8 bssid_index; u8 bssid_indicator; @@ -2023,7 +2027,6 @@ enum ieee80211_neg_ttlm_res { * @txq: the multicast data TX queue * @offload_flags: 802.3 -> 802.11 enapsulation offload flags, see * &enum ieee80211_offload_flags. - * @mbssid_tx_vif: Pointer to the transmitting interface if MBSSID is enabled. */ struct ieee80211_vif { enum nl80211_iftype type; @@ -2052,8 +2055,6 @@ struct ieee80211_vif { bool probe_req_reg; bool rx_mcast_action_reg; - struct ieee80211_vif *mbssid_tx_vif; - /* must be last */ u8 drv_priv[] __aligned(sizeof(void *)); }; @@ -2488,6 +2489,7 @@ struct ieee80211_link_sta { * @max_amsdu_subframes: indicates the maximal number of MSDUs in a single * A-MSDU. Taken from the Extended Capabilities element. 0 means * unlimited. + * @eml_cap: EML capabilities of this MLO station * @cur: currently valid data as aggregated from the active links * For non MLO STA it will point to the deflink data. For MLO STA * ieee80211_sta_recalc_aggregates() must be called to update it. @@ -2522,6 +2524,7 @@ struct ieee80211_sta { bool mlo; bool spp_amsdu; u8 max_amsdu_subframes; + u16 eml_cap; struct ieee80211_sta_aggregates *cur; @@ -5347,22 +5350,6 @@ void ieee80211_get_tx_rates(struct ieee80211_vif *vif, int max_rates); /** - * ieee80211_sta_set_expected_throughput - set the expected tpt for a station - * - * Call this function to notify mac80211 about a change in expected throughput - * to a station. A driver for a device that does rate control in firmware can - * call this function when the expected throughput estimate towards a station - * changes. The information is used to tune the CoDel AQM applied to traffic - * going towards that station (which can otherwise be too aggressive and cause - * slow stations to starve). - * - * @pubsta: the station to set throughput for. - * @thr: the current expected throughput in kbps. - */ -void ieee80211_sta_set_expected_throughput(struct ieee80211_sta *pubsta, - u32 thr); - -/** * ieee80211_tx_rate_update - transmit rate update callback * * Drivers should call this functions with a non-NULL pub sta diff --git a/include/net/sock.h b/include/net/sock.h index e223102337c7..f0fabb9fd28a 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -2735,8 +2735,6 @@ static inline void _sock_tx_timestamp(struct sock *sk, *tskey = atomic_inc_return(&sk->sk_tskey) - 1; } } - if (unlikely(sock_flag(sk, SOCK_WIFI_STATUS))) - *tx_flags |= SKBTX_WIFI_STATUS; } static inline void sock_tx_timestamp(struct sock *sk, diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index ddcc4cda74af..e9ccf43fe3c6 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -8036,6 +8036,11 @@ enum nl80211_sar_specs_attrs { * Setting this flag is permitted only if the driver advertises EMA support * by setting wiphy->ema_max_profile_periodicity to non-zero. * + * @NL80211_MBSSID_CONFIG_ATTR_TX_LINK_ID: Link ID of the transmitted profile. + * This parameter is mandatory when NL80211_ATTR_MBSSID_CONFIG attributes + * are sent for a non-transmitted profile and if the transmitted profile + * is part of an MLD. For all other cases this parameter is unnecessary. + * * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute */ @@ -8047,6 +8052,7 @@ enum nl80211_mbssid_config_attributes { NL80211_MBSSID_CONFIG_ATTR_INDEX, NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX, NL80211_MBSSID_CONFIG_ATTR_EMA, + NL80211_MBSSID_CONFIG_ATTR_TX_LINK_ID, /* keep last */ __NL80211_MBSSID_CONFIG_ATTR_LAST, |