diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/net/cfg80211.h | 95 | ||||
| -rw-r--r-- | include/uapi/linux/nl80211.h | 15 |
2 files changed, 110 insertions, 0 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 26fd42e189ce..2d612c760dd1 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -129,6 +129,13 @@ struct wiphy; * with very low power (VLP), even if otherwise set to NO_IR. * @IEEE80211_CHAN_ALLOW_20MHZ_ACTIVITY: Allow activity on a 20 MHz channel, * even if otherwise set to NO_IR. + * @IEEE80211_CHAN_S1G_NO_PRIMARY: Prevents the channel for use as an S1G + * primary channel. Does not prevent the wider operating channel + * described by the chandef from being used. In order for a 2MHz primary + * to be used, both 1MHz subchannels shall not contain this flag. + * @IEEE80211_CHAN_NO_4MHZ: 4 MHz bandwidth is not permitted on this channel. + * @IEEE80211_CHAN_NO_8MHZ: 8 MHz bandwidth is not permitted on this channel. + * @IEEE80211_CHAN_NO_16MHZ: 16 MHz bandwidth is not permitted on this channel. */ enum ieee80211_channel_flags { IEEE80211_CHAN_DISABLED = BIT(0), @@ -158,6 +165,10 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_CAN_MONITOR = BIT(24), IEEE80211_CHAN_ALLOW_6GHZ_VLP_AP = BIT(25), IEEE80211_CHAN_ALLOW_20MHZ_ACTIVITY = BIT(26), + IEEE80211_CHAN_S1G_NO_PRIMARY = BIT(27), + IEEE80211_CHAN_NO_4MHZ = BIT(28), + IEEE80211_CHAN_NO_8MHZ = BIT(29), + IEEE80211_CHAN_NO_16MHZ = BIT(30), }; #define IEEE80211_CHAN_NO_HT40 \ @@ -821,6 +832,9 @@ struct key_params { * @punctured: mask of the punctured 20 MHz subchannels, with * bits turned on being disabled (punctured); numbered * from lower to higher frequency (like in the spec) + * @s1g_primary_2mhz: Indicates if the control channel pointed to + * by 'chan' exists as a 1MHz primary subchannel within an + * S1G 2MHz primary channel. */ struct cfg80211_chan_def { struct ieee80211_channel *chan; @@ -830,6 +844,7 @@ struct cfg80211_chan_def { struct ieee80211_edmg edmg; u16 freq1_offset; u16 punctured; + bool s1g_primary_2mhz; }; /* @@ -991,6 +1006,18 @@ cfg80211_chandef_is_edmg(const struct cfg80211_chan_def *chandef) } /** + * cfg80211_chandef_is_s1g - check if chandef represents an S1G channel + * @chandef: the channel definition + * + * Return: %true if S1G. + */ +static inline bool +cfg80211_chandef_is_s1g(const struct cfg80211_chan_def *chandef) +{ + return chandef->chan->band == NL80211_BAND_S1GHZ; +} + +/** * cfg80211_chandef_compatible - check if two channel definitions are compatible * @chandef1: first channel definition * @chandef2: second channel definition @@ -10179,4 +10206,72 @@ ssize_t wiphy_locked_debugfs_write(struct wiphy *wiphy, struct file *file, void *data); #endif +/** + * cfg80211_s1g_get_start_freq_khz - get S1G chandef start frequency + * @chandef: the chandef to use + * + * Return: the chandefs starting frequency in KHz + */ +static inline u32 +cfg80211_s1g_get_start_freq_khz(const struct cfg80211_chan_def *chandef) +{ + u32 bw_mhz = cfg80211_chandef_get_width(chandef); + u32 center_khz = + MHZ_TO_KHZ(chandef->center_freq1) + chandef->freq1_offset; + return center_khz - bw_mhz * 500 + 500; +} + +/** + * cfg80211_s1g_get_end_freq_khz - get S1G chandef end frequency + * @chandef: the chandef to use + * + * Return: the chandefs ending frequency in KHz + */ +static inline u32 +cfg80211_s1g_get_end_freq_khz(const struct cfg80211_chan_def *chandef) +{ + u32 bw_mhz = cfg80211_chandef_get_width(chandef); + u32 center_khz = + MHZ_TO_KHZ(chandef->center_freq1) + chandef->freq1_offset; + return center_khz + bw_mhz * 500 - 500; +} + +/** + * cfg80211_s1g_get_primary_sibling - retrieve the sibling 1MHz subchannel + * for an S1G chandef using a 2MHz primary channel. + * @wiphy: wiphy the channel belongs to + * @chandef: the chandef to use + * + * When chandef::s1g_primary_2mhz is set to true, we are operating on a 2MHz + * primary channel. The 1MHz subchannel designated by the primary channel + * location exists within chandef::chan, whilst the 'sibling' is denoted as + * being the other 1MHz subchannel that make up the 2MHz primary channel. + * + * Returns: the sibling 1MHz &struct ieee80211_channel, or %NULL on failure. + */ +static inline struct ieee80211_channel * +cfg80211_s1g_get_primary_sibling(struct wiphy *wiphy, + const struct cfg80211_chan_def *chandef) +{ + int width_mhz = cfg80211_chandef_get_width(chandef); + u32 pri_1mhz_khz, sibling_1mhz_khz, op_low_1mhz_khz, pri_index; + + if (!chandef->s1g_primary_2mhz || width_mhz < 2) + return NULL; + + pri_1mhz_khz = ieee80211_channel_to_khz(chandef->chan); + op_low_1mhz_khz = cfg80211_s1g_get_start_freq_khz(chandef); + + /* + * Compute the index of the primary 1 MHz subchannel within the + * operating channel, relative to the lowest 1 MHz center frequency. + * Flip the least significant bit to select the even/odd sibling, + * then translate that index back into a channel frequency. + */ + pri_index = (pri_1mhz_khz - op_low_1mhz_khz) / 1000; + sibling_1mhz_khz = op_low_1mhz_khz + ((pri_index ^ 1) * 1000); + + return ieee80211_get_channel_khz(wiphy, sibling_1mhz_khz); +} + #endif /* __NET_CFG80211_H */ diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 423e258cdbd2..8134f10e4e6c 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2969,6 +2969,10 @@ enum nl80211_commands { * capabilities supported by the driver. See &enum nl80211_nan_capabilities * for details. * + * @NL80211_ATTR_S1G_PRIMARY_2MHZ: flag attribute indicating that the S1G + * primary channel is 2 MHz wide, and the control channel designates + * the 1 MHz primary subchannel within that 2 MHz primary. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3535,6 +3539,8 @@ enum nl80211_attrs { NL80211_ATTR_NAN_NEW_CLUSTER, NL80211_ATTR_NAN_CAPABILITIES, + NL80211_ATTR_S1G_PRIMARY_2MHZ, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -4432,6 +4438,12 @@ enum nl80211_wmm_rule { * very low power (VLP) AP, despite being NO_IR. * @NL80211_FREQUENCY_ATTR_ALLOW_20MHZ_ACTIVITY: This channel can be active in * 20 MHz bandwidth, despite being NO_IR. + * @NL80211_FREQUENCY_ATTR_NO_4MHZ: 4 MHz operation is not allowed on this + * channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_8MHZ: 8 MHz operation is not allowed on this + * channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_16MHZ: 16 MHz operation is not allowed on this + * channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -4477,6 +4489,9 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_CAN_MONITOR, NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP, NL80211_FREQUENCY_ATTR_ALLOW_20MHZ_ACTIVITY, + NL80211_FREQUENCY_ATTR_NO_4MHZ, + NL80211_FREQUENCY_ATTR_NO_8MHZ, + NL80211_FREQUENCY_ATTR_NO_16MHZ, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, |